6937487be7
Back in 2007, commit 0c97c9d437
("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
648 lines
18 KiB
C
648 lines
18 KiB
C
/* vi: set sw=4 ts=4: */
|
|
/*
|
|
* SuS3 compliant sort implementation for busybox
|
|
*
|
|
* Copyright (C) 2004 by Rob Landley <rob@landley.net>
|
|
*
|
|
* MAINTAINER: Rob Landley <rob@landley.net>
|
|
*
|
|
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
|
|
*
|
|
* See SuS3 sort standard at:
|
|
* http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
|
|
*/
|
|
//config:config SORT
|
|
//config: bool "sort (7.7 kb)"
|
|
//config: default y
|
|
//config: help
|
|
//config: sort is used to sort lines of text in specified files.
|
|
//config:
|
|
//config:config FEATURE_SORT_BIG
|
|
//config: bool "Full SuSv3 compliant sort (support -ktcbdfiogM)"
|
|
//config: default y
|
|
//config: depends on SORT
|
|
//config: help
|
|
//config: Without this, sort only supports -rusz, and an integer version
|
|
//config: of -n. Selecting this adds sort keys, floating point support, and
|
|
//config: more. This adds a little over 3k to a nonstatic build on x86.
|
|
//config:
|
|
//config: The SuSv3 sort standard is available at:
|
|
//config: http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
|
|
//config:
|
|
//config:config FEATURE_SORT_OPTIMIZE_MEMORY
|
|
//config: bool "Use less memory (but might be slower)"
|
|
//config: default n # defaults to N since we are size-paranoid tribe
|
|
//config: depends on SORT
|
|
//config: help
|
|
//config: Attempt to use less memory (by storing only one copy
|
|
//config: of duplicated lines, and such). Useful if you work on huge files.
|
|
|
|
//applet:IF_SORT(APPLET_NOEXEC(sort, sort, BB_DIR_USR_BIN, BB_SUID_DROP, sort))
|
|
|
|
//kbuild:lib-$(CONFIG_SORT) += sort.o
|
|
|
|
//usage:#define sort_trivial_usage
|
|
//usage: "[-nru"
|
|
//usage: IF_FEATURE_SORT_BIG("gMcszbdfiokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR")
|
|
//usage: "] [FILE]..."
|
|
//usage:#define sort_full_usage "\n\n"
|
|
//usage: "Sort lines of text\n"
|
|
//usage: IF_FEATURE_SORT_BIG(
|
|
//usage: "\n -o FILE Output to FILE"
|
|
//usage: "\n -c Check whether input is sorted"
|
|
//usage: "\n -b Ignore leading blanks"
|
|
//usage: "\n -f Ignore case"
|
|
//usage: "\n -i Ignore unprintable characters"
|
|
//usage: "\n -d Dictionary order (blank or alphanumeric only)"
|
|
//usage: )
|
|
//-h, --human-numeric-sort: compare human readable numbers (e.g., 2K 1G)
|
|
//usage: "\n -n Sort numbers"
|
|
//usage: IF_FEATURE_SORT_BIG(
|
|
//usage: "\n -g General numerical sort"
|
|
//usage: "\n -M Sort month"
|
|
//usage: "\n -V Sort version"
|
|
//usage: "\n -t CHAR Field separator"
|
|
//usage: "\n -k N[,M] Sort by Nth field"
|
|
//usage: )
|
|
//usage: "\n -r Reverse sort order"
|
|
//usage: "\n -s Stable (don't sort ties alphabetically)"
|
|
//usage: "\n -u Suppress duplicate lines"
|
|
//usage: "\n -z Lines are terminated by NUL, not newline"
|
|
///////: "\n -m Ignored for GNU compatibility"
|
|
///////: "\n -S BUFSZ Ignored for GNU compatibility"
|
|
///////: "\n -T TMPDIR Ignored for GNU compatibility"
|
|
//usage:
|
|
//usage:#define sort_example_usage
|
|
//usage: "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n"
|
|
//usage: "a\n"
|
|
//usage: "b\n"
|
|
//usage: "c\n"
|
|
//usage: "d\n"
|
|
//usage: "e\n"
|
|
//usage: "f\n"
|
|
//usage: IF_FEATURE_SORT_BIG(
|
|
//usage: "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n"
|
|
//usage: "d 2\n"
|
|
//usage: "b 2\n"
|
|
//usage: "c 3\n"
|
|
//usage: )
|
|
//usage: ""
|
|
|
|
#include "libbb.h"
|
|
|
|
/* These are sort types */
|
|
enum {
|
|
FLAG_n = 1 << 0, /* Numeric sort */
|
|
FLAG_g = 1 << 1, /* Sort using strtod() */
|
|
FLAG_M = 1 << 2, /* Sort date */
|
|
FLAG_V = 1 << 3, /* Sort version */
|
|
/* ucsz apply to root level only, not keys. b at root level implies bb */
|
|
FLAG_u = 1 << 4, /* Unique */
|
|
FLAG_c = 1 << 5, /* Check: no output, exit(!ordered) */
|
|
FLAG_s = 1 << 6, /* Stable sort, no ascii fallback at end */
|
|
FLAG_z = 1 << 7, /* Input and output is NUL terminated, not \n */
|
|
/* These can be applied to search keys, the previous four can't */
|
|
FLAG_b = 1 << 8, /* Ignore leading blanks */
|
|
FLAG_r = 1 << 9, /* Reverse */
|
|
FLAG_d = 1 << 10, /* Ignore !(isalnum()|isspace()) */
|
|
FLAG_f = 1 << 11, /* Force uppercase */
|
|
FLAG_i = 1 << 12, /* Ignore !isprint() */
|
|
FLAG_m = 1 << 13, /* ignored: merge already sorted files; do not sort */
|
|
FLAG_S = 1 << 14, /* ignored: -S, --buffer-size=SIZE */
|
|
FLAG_T = 1 << 15, /* ignored: -T, --temporary-directory=DIR */
|
|
FLAG_o = 1 << 16,
|
|
FLAG_k = 1 << 17,
|
|
FLAG_t = 1 << 18,
|
|
FLAG_bb = 0x80000000, /* Ignore trailing blanks */
|
|
FLAG_no_tie_break = 0x40000000,
|
|
};
|
|
|
|
static const char sort_opt_str[] ALIGN1 = "^"
|
|
"ngMVucszbrdfimS:T:o:k:*t:"
|
|
"\0" "o--o:t--t"/*-t, -o: at most one of each*/;
|
|
/*
|
|
* OPT_STR must not be string literal, needs to have stable address:
|
|
* code uses "strchr(OPT_STR,c) - OPT_STR" idiom.
|
|
*/
|
|
#define OPT_STR (sort_opt_str + 1)
|
|
|
|
#if ENABLE_FEATURE_SORT_BIG
|
|
static char key_separator;
|
|
|
|
static struct sort_key {
|
|
struct sort_key *next_key; /* linked list */
|
|
unsigned range[4]; /* start word, start char, end word, end char */
|
|
unsigned flags;
|
|
} *key_list;
|
|
|
|
|
|
/* This is a NOEXEC applet. Be very careful! */
|
|
|
|
|
|
static char *get_key(char *str, struct sort_key *key, int flags)
|
|
{
|
|
int start = start; /* for compiler */
|
|
int end;
|
|
int len, j;
|
|
unsigned i;
|
|
|
|
/* Special case whole string, so we don't have to make a copy */
|
|
if (key->range[0] == 1 && !key->range[1] && !key->range[2] && !key->range[3]
|
|
&& !(flags & (FLAG_b | FLAG_d | FLAG_f | FLAG_i | FLAG_bb))
|
|
) {
|
|
return str;
|
|
}
|
|
|
|
/* Find start of key on first pass, end on second pass */
|
|
len = strlen(str);
|
|
for (j = 0; j < 2; j++) {
|
|
if (!key->range[2*j])
|
|
end = len;
|
|
/* Loop through fields */
|
|
else {
|
|
unsigned char ch = 0;
|
|
|
|
end = 0;
|
|
for (i = 1; i < key->range[2*j] + j; i++) {
|
|
if (key_separator) {
|
|
/* Skip body of key and separator */
|
|
while ((ch = str[end]) != '\0') {
|
|
end++;
|
|
if (ch == key_separator)
|
|
break;
|
|
}
|
|
} else {
|
|
/* Skip leading blanks */
|
|
while (isspace(str[end]))
|
|
end++;
|
|
/* Skip body of key */
|
|
while (str[end] != '\0') {
|
|
if (isspace(str[end]))
|
|
break;
|
|
end++;
|
|
}
|
|
}
|
|
}
|
|
/* Remove last delim: "abc:def:" => "abc:def" */
|
|
if (j && ch) {
|
|
//if (str[end-1] != key_separator)
|
|
// bb_error_msg(_and_die("BUG! "
|
|
// "str[start:%d,end:%d]:'%.*s'",
|
|
// start, end, (int)(end-start), &str[start]);
|
|
end--;
|
|
}
|
|
}
|
|
if (!j) start = end;
|
|
}
|
|
/* Strip leading whitespace if necessary */
|
|
if (flags & FLAG_b)
|
|
/* not using skip_whitespace() for speed */
|
|
while (isspace(str[start])) start++;
|
|
/* Strip trailing whitespace if necessary */
|
|
if (flags & FLAG_bb)
|
|
while (end > start && isspace(str[end-1])) end--;
|
|
/* -kSTART,N.ENDCHAR: honor ENDCHAR (1-based) */
|
|
if (key->range[3]) {
|
|
end = key->range[3];
|
|
if (end > len) end = len;
|
|
}
|
|
/* -kN.STARTCHAR[,...]: honor STARTCHAR (1-based) */
|
|
if (key->range[1]) {
|
|
start += key->range[1] - 1;
|
|
if (start > len) start = len;
|
|
}
|
|
/* Make the copy */
|
|
if (end < start)
|
|
end = start;
|
|
str = xstrndup(str+start, end-start);
|
|
/* Handle -d */
|
|
if (flags & FLAG_d) {
|
|
for (start = end = 0; str[end]; end++)
|
|
if (isspace(str[end]) || isalnum(str[end]))
|
|
str[start++] = str[end];
|
|
str[start] = '\0';
|
|
}
|
|
/* Handle -i */
|
|
if (flags & FLAG_i) {
|
|
for (start = end = 0; str[end]; end++)
|
|
if (isprint_asciionly(str[end]))
|
|
str[start++] = str[end];
|
|
str[start] = '\0';
|
|
}
|
|
/* Handle -f */
|
|
if (flags & FLAG_f)
|
|
for (i = 0; str[i]; i++)
|
|
str[i] = toupper(str[i]);
|
|
|
|
return str;
|
|
}
|
|
|
|
static struct sort_key *add_key(void)
|
|
{
|
|
struct sort_key **pkey = &key_list;
|
|
while (*pkey)
|
|
pkey = &((*pkey)->next_key);
|
|
return *pkey = xzalloc(sizeof(struct sort_key));
|
|
}
|
|
|
|
#define GET_LINE(fp) \
|
|
((option_mask32 & FLAG_z) \
|
|
? bb_get_chunk_from_file(fp, NULL) \
|
|
: xmalloc_fgetline(fp))
|
|
#else
|
|
#define GET_LINE(fp) xmalloc_fgetline(fp)
|
|
#endif
|
|
|
|
/* Iterate through keys list and perform comparisons */
|
|
static int compare_keys(const void *xarg, const void *yarg)
|
|
{
|
|
int flags = option_mask32, retval = 0;
|
|
char *x, *y;
|
|
|
|
#if ENABLE_FEATURE_SORT_BIG
|
|
struct sort_key *key;
|
|
|
|
for (key = key_list; !retval && key; key = key->next_key) {
|
|
flags = key->flags ? key->flags : option_mask32;
|
|
/* Chop out and modify key chunks, handling -dfib */
|
|
x = get_key(*(char **)xarg, key, flags);
|
|
y = get_key(*(char **)yarg, key, flags);
|
|
#else
|
|
/* This curly bracket serves no purpose but to match the nesting
|
|
* level of the for () loop we're not using */
|
|
{
|
|
x = *(char **)xarg;
|
|
y = *(char **)yarg;
|
|
#endif
|
|
/* Perform actual comparison */
|
|
switch (flags & (FLAG_n | FLAG_g | FLAG_M | FLAG_V)) {
|
|
default:
|
|
bb_simple_error_msg_and_die("unknown sort type");
|
|
break;
|
|
#if defined(HAVE_STRVERSCMP) && HAVE_STRVERSCMP == 1
|
|
case FLAG_V:
|
|
retval = strverscmp(x, y);
|
|
break;
|
|
#endif
|
|
/* Ascii sort */
|
|
case 0:
|
|
#if ENABLE_LOCALE_SUPPORT
|
|
retval = strcoll(x, y);
|
|
#else
|
|
retval = strcmp(x, y);
|
|
#endif
|
|
break;
|
|
#if ENABLE_FEATURE_SORT_BIG
|
|
case FLAG_g: {
|
|
char *xx, *yy;
|
|
double dx = strtod(x, &xx);
|
|
double dy = strtod(y, &yy);
|
|
/* not numbers < NaN < -infinity < numbers < +infinity) */
|
|
if (x == xx)
|
|
retval = (y == yy ? 0 : -1);
|
|
else if (y == yy)
|
|
retval = 1;
|
|
/* Check for isnan */
|
|
else if (dx != dx)
|
|
retval = (dy != dy) ? 0 : -1;
|
|
else if (dy != dy)
|
|
retval = 1;
|
|
/* Check for infinity. Could underflow, but it avoids libm. */
|
|
else if (1.0 / dx == 0.0) {
|
|
if (dx < 0)
|
|
retval = (1.0 / dy == 0.0 && dy < 0) ? 0 : -1;
|
|
else
|
|
retval = (1.0 / dy == 0.0 && dy > 0) ? 0 : 1;
|
|
} else if (1.0 / dy == 0.0)
|
|
retval = (dy < 0) ? 1 : -1;
|
|
else
|
|
retval = (dx > dy) ? 1 : ((dx < dy) ? -1 : 0);
|
|
break;
|
|
}
|
|
case FLAG_M: {
|
|
struct tm thyme;
|
|
int dx;
|
|
char *xx, *yy;
|
|
|
|
xx = strptime(x, "%b", &thyme);
|
|
dx = thyme.tm_mon;
|
|
yy = strptime(y, "%b", &thyme);
|
|
if (!xx)
|
|
retval = (!yy) ? 0 : -1;
|
|
else if (!yy)
|
|
retval = 1;
|
|
else
|
|
retval = dx - thyme.tm_mon;
|
|
break;
|
|
}
|
|
/* Full floating point version of -n */
|
|
case FLAG_n: {
|
|
double dx = atof(x);
|
|
double dy = atof(y);
|
|
retval = (dx > dy) ? 1 : ((dx < dy) ? -1 : 0);
|
|
break;
|
|
}
|
|
} /* switch */
|
|
/* Free key copies. */
|
|
if (x != *(char **)xarg) free(x);
|
|
if (y != *(char **)yarg) free(y);
|
|
/* if (retval) break; - done by for () anyway */
|
|
#else
|
|
/* Integer version of -n for tiny systems */
|
|
case FLAG_n:
|
|
retval = atoi(x) - atoi(y);
|
|
break;
|
|
} /* switch */
|
|
#endif
|
|
} /* for */
|
|
|
|
if (retval == 0) {
|
|
/* So far lines are "the same" */
|
|
|
|
if (option_mask32 & FLAG_s) {
|
|
/* "Stable sort": later line is "greater than",
|
|
* IOW: do not allow qsort() to swap equal lines.
|
|
*/
|
|
uint32_t *p32;
|
|
uint32_t x32, y32;
|
|
char *line;
|
|
unsigned len;
|
|
|
|
line = *(char**)xarg;
|
|
len = (strlen(line) + 4) & (~3u);
|
|
p32 = (void*)(line + len);
|
|
x32 = *p32;
|
|
line = *(char**)yarg;
|
|
len = (strlen(line) + 4) & (~3u);
|
|
p32 = (void*)(line + len);
|
|
y32 = *p32;
|
|
|
|
/* If x > y, 1, else -1 */
|
|
retval = (x32 > y32) * 2 - 1;
|
|
} else
|
|
if (!(option_mask32 & FLAG_no_tie_break)) {
|
|
/* fallback sort */
|
|
flags = option_mask32;
|
|
retval = strcmp(*(char **)xarg, *(char **)yarg);
|
|
}
|
|
}
|
|
|
|
if (flags & FLAG_r)
|
|
return -retval;
|
|
|
|
return retval;
|
|
}
|
|
|
|
#if ENABLE_FEATURE_SORT_BIG
|
|
static unsigned str2u(char **str)
|
|
{
|
|
unsigned long lu;
|
|
if (!isdigit((*str)[0]))
|
|
bb_simple_error_msg_and_die("bad field specification");
|
|
lu = strtoul(*str, str, 10);
|
|
if ((sizeof(long) > sizeof(int) && lu > INT_MAX) || !lu)
|
|
bb_simple_error_msg_and_die("bad field specification");
|
|
return lu;
|
|
}
|
|
#endif
|
|
|
|
int sort_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
|
|
int sort_main(int argc UNUSED_PARAM, char **argv)
|
|
{
|
|
char **lines;
|
|
char *str_ignored, *str_o, *str_t;
|
|
llist_t *lst_k = NULL;
|
|
int i;
|
|
int linecount;
|
|
unsigned opts;
|
|
#if ENABLE_FEATURE_SORT_OPTIMIZE_MEMORY
|
|
bool can_drop_dups;
|
|
size_t prev_len = 0;
|
|
char *prev_line = (char*) "";
|
|
/* Postpone optimizing if the input is small, < 16k lines:
|
|
* even just free()ing duplicate lines takes time.
|
|
*/
|
|
size_t count_to_optimize_dups = 0x3fff;
|
|
#endif
|
|
|
|
xfunc_error_retval = 2;
|
|
|
|
/* Parse command line options */
|
|
opts = getopt32(argv,
|
|
sort_opt_str,
|
|
&str_ignored, &str_ignored, &str_o, &lst_k, &str_t
|
|
);
|
|
#if ENABLE_FEATURE_SORT_OPTIMIZE_MEMORY
|
|
/* Can drop dups only if -u but no "complicating" options,
|
|
* IOW: if we do a full line compares. Safe options:
|
|
* -o FILE Output to FILE
|
|
* -z Lines are terminated by NUL, not newline
|
|
* -r Reverse sort order
|
|
* -s Stable (don't sort ties alphabetically)
|
|
* Not sure about these:
|
|
* -b Ignore leading blanks
|
|
* -f Ignore case
|
|
* -i Ignore unprintable characters
|
|
* -d Dictionary order (blank or alphanumeric only)
|
|
* -n Sort numbers
|
|
* -g General numerical sort
|
|
* -M Sort month
|
|
*/
|
|
can_drop_dups = ((opts & ~(FLAG_o|FLAG_z|FLAG_r|FLAG_s)) == FLAG_u);
|
|
/* Stable sort needs every line to be uniquely allocated,
|
|
* disable optimization to reuse strings:
|
|
*/
|
|
if (opts & FLAG_s)
|
|
count_to_optimize_dups = (size_t)-1L;
|
|
#endif
|
|
/* global b strips leading and trailing spaces */
|
|
if (opts & FLAG_b)
|
|
option_mask32 |= FLAG_bb;
|
|
#if ENABLE_FEATURE_SORT_BIG
|
|
if (opts & FLAG_t) {
|
|
if (!str_t[0] || str_t[1])
|
|
bb_simple_error_msg_and_die("bad -t parameter");
|
|
key_separator = str_t[0];
|
|
}
|
|
/* note: below this point we use option_mask32, not opts,
|
|
* since that reduces register pressure and makes code smaller */
|
|
|
|
/* Parse sort key */
|
|
while (lst_k) {
|
|
enum {
|
|
FLAG_allowed_for_k =
|
|
FLAG_n | /* Numeric sort */
|
|
FLAG_g | /* Sort using strtod() */
|
|
FLAG_M | /* Sort date */
|
|
FLAG_b | /* Ignore leading blanks */
|
|
FLAG_r | /* Reverse */
|
|
FLAG_d | /* Ignore !(isalnum()|isspace()) */
|
|
FLAG_f | /* Force uppercase */
|
|
FLAG_i | /* Ignore !isprint() */
|
|
0
|
|
};
|
|
struct sort_key *key = add_key();
|
|
char *str_k = llist_pop(&lst_k);
|
|
|
|
i = 0; /* i==0 before comma, 1 after (-k3,6) */
|
|
while (*str_k) {
|
|
/* Start of range */
|
|
/* Cannot use bb_strtou - suffix can be a letter */
|
|
key->range[2*i] = str2u(&str_k);
|
|
if (*str_k == '.') {
|
|
str_k++;
|
|
key->range[2*i+1] = str2u(&str_k);
|
|
}
|
|
while (*str_k) {
|
|
int flag;
|
|
const char *idx;
|
|
|
|
if (*str_k == ',' && !i++) {
|
|
str_k++;
|
|
break;
|
|
} /* no else needed: fall through to syntax error
|
|
because comma isn't in OPT_STR */
|
|
idx = strchr(OPT_STR, *str_k);
|
|
if (!idx)
|
|
bb_simple_error_msg_and_die("unknown key option");
|
|
flag = 1 << (idx - OPT_STR);
|
|
if (flag & ~FLAG_allowed_for_k)
|
|
bb_simple_error_msg_and_die("unknown sort type");
|
|
/* b after ',' means strip _trailing_ space */
|
|
if (i && flag == FLAG_b)
|
|
flag = FLAG_bb;
|
|
key->flags |= flag;
|
|
str_k++;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Open input files and read data */
|
|
argv += optind;
|
|
if (!*argv)
|
|
*--argv = (char*)"-";
|
|
linecount = 0;
|
|
lines = NULL;
|
|
do {
|
|
/* coreutils 6.9 compat: abort on first open error,
|
|
* do not continue to next file: */
|
|
FILE *fp = xfopen_stdin(*argv);
|
|
for (;;) {
|
|
char *line = GET_LINE(fp);
|
|
if (!line)
|
|
break;
|
|
|
|
#if ENABLE_FEATURE_SORT_OPTIMIZE_MEMORY
|
|
if (count_to_optimize_dups != 0)
|
|
count_to_optimize_dups--;
|
|
if (count_to_optimize_dups == 0) {
|
|
size_t len;
|
|
char *new_line;
|
|
|
|
/* On kernel/linux/arch/ *.[ch] files,
|
|
* this reduces memory usage by 6%.
|
|
* yes | head -99999999 | sort
|
|
* goes down from 1900Mb to 380 Mb.
|
|
*/
|
|
len = strlen(line);
|
|
if (len <= prev_len) {
|
|
new_line = prev_line + (prev_len - len);
|
|
if (strcmp(line, new_line) == 0) {
|
|
/* it's a tail of the prev line */
|
|
if (can_drop_dups && prev_len == len) {
|
|
/* it's identical to prev line */
|
|
free(line);
|
|
continue;
|
|
}
|
|
free(line);
|
|
line = new_line;
|
|
/* continue using longer prev_line
|
|
* for future tail tests.
|
|
*/
|
|
goto skip;
|
|
}
|
|
}
|
|
prev_len = len;
|
|
prev_line = line;
|
|
skip: ;
|
|
}
|
|
#else
|
|
//TODO: lighter version which only drops total dups if can_drop_dups == true
|
|
#endif
|
|
lines = xrealloc_vector(lines, 6, linecount);
|
|
lines[linecount++] = line;
|
|
}
|
|
fclose_if_not_stdin(fp);
|
|
} while (*++argv);
|
|
|
|
#if ENABLE_FEATURE_SORT_BIG
|
|
/* If no key, perform alphabetic sort */
|
|
if (!key_list)
|
|
add_key()->range[0] = 1;
|
|
/* Handle -c */
|
|
if (option_mask32 & FLAG_c) {
|
|
int j = (option_mask32 & FLAG_u) ? -1 : 0;
|
|
for (i = 1; i < linecount; i++) {
|
|
if (compare_keys(&lines[i-1], &lines[i]) > j) {
|
|
fprintf(stderr, "Check line %u\n", i);
|
|
return EXIT_FAILURE;
|
|
}
|
|
}
|
|
return EXIT_SUCCESS;
|
|
}
|
|
#endif
|
|
|
|
/* For stable sort, store original line position beyond terminating NUL */
|
|
if (option_mask32 & FLAG_s) {
|
|
for (i = 0; i < linecount; i++) {
|
|
uint32_t *p32;
|
|
char *line;
|
|
unsigned len;
|
|
|
|
line = lines[i];
|
|
len = (strlen(line) + 4) & (~3u);
|
|
lines[i] = line = xrealloc(line, len + 4);
|
|
p32 = (void*)(line + len);
|
|
*p32 = i;
|
|
}
|
|
/*option_mask32 |= FLAG_no_tie_break;*/
|
|
/* ^^^redundant: if FLAG_s, compare_keys() does no tie break */
|
|
}
|
|
|
|
/* Perform the actual sort */
|
|
qsort(lines, linecount, sizeof(lines[0]), compare_keys);
|
|
|
|
/* Handle -u */
|
|
if (option_mask32 & FLAG_u) {
|
|
int j = 0;
|
|
/* coreutils 6.3 drop lines for which only key is the same
|
|
* -- disabling last-resort compare, or else compare_keys()
|
|
* will be the same only for completely identical lines.
|
|
*/
|
|
option_mask32 |= FLAG_no_tie_break;
|
|
for (i = 1; i < linecount; i++) {
|
|
if (compare_keys(&lines[j], &lines[i]) == 0)
|
|
free(lines[i]);
|
|
else
|
|
lines[++j] = lines[i];
|
|
}
|
|
if (linecount)
|
|
linecount = j+1;
|
|
}
|
|
|
|
/* Print it */
|
|
#if ENABLE_FEATURE_SORT_BIG
|
|
/* Open output file _after_ we read all input ones */
|
|
if (option_mask32 & FLAG_o)
|
|
xmove_fd(xopen(str_o, O_WRONLY|O_CREAT|O_TRUNC), STDOUT_FILENO);
|
|
#endif
|
|
{
|
|
int ch = (option_mask32 & FLAG_z) ? '\0' : '\n';
|
|
for (i = 0; i < linecount; i++)
|
|
printf("%s%c", lines[i], ch);
|
|
}
|
|
|
|
fflush_stdout_and_exit(EXIT_SUCCESS);
|
|
}
|