busybox/loginutils/getty.c
Denys Vlasenko faaf8cb3fa getty: more simplifications; explain how we treat parity now
function                                             old     new   delta
getty_main                                          1471    1434     -37

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-01-24 14:35:09 +01:00

592 lines
18 KiB
C

/* vi: set sw=4 ts=4: */
/*
* Based on agetty - another getty program for Linux. By W. Z. Venema 1989
* Ported to Linux by Peter Orbaek <poe@daimi.aau.dk>
* This program is freely distributable.
*
* option added by Eric Rasmussen <ear@usfirst.org> - 12/28/95
*
* 1999-02-22 Arkadiusz Mickiewicz <misiek@misiek.eu.org>
* - Added Native Language Support
*
* 1999-05-05 Thorsten Kranzkowski <dl8bcu@gmx.net>
* - Enabled hardware flow control before displaying /etc/issue
*
* 2011-01 Venys Vlasenko
* - Removed parity detection code. It can't work reliably:
* if all chars received have bit 7 cleared and odd (or even) parity,
* it is impossible to determine whether other side is 8-bit,no-parity
* or 7-bit,odd(even)-parity. It also interferes with non-ASCII usernames.
* - From now on, we assume that parity is correctly set.
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
#include "libbb.h"
#include <syslog.h>
#if ENABLE_FEATURE_UTMP
# include <utmp.h> /* LOGIN_PROCESS */
#endif
#ifndef IUCLC
# define IUCLC 0
#endif
#ifndef LOGIN_PROCESS
# undef ENABLE_FEATURE_UTMP
# undef ENABLE_FEATURE_WTMP
# define ENABLE_FEATURE_UTMP 0
# define ENABLE_FEATURE_WTMP 0
#endif
/* The following is used for understandable diagnostics */
#ifdef DEBUGGING
static FILE *dbf;
# define DEBUGTERM "/dev/ttyp0"
# define debug(...) do { fprintf(dbf, __VA_ARGS__); fflush(dbf); } while (0)
#else
# define debug(...) ((void)0)
#endif
/*
* Things you may want to modify.
*
* You may disagree with the default line-editing etc. characters defined
* below. Note, however, that DEL cannot be used for interrupt generation
* and for line editing at the same time.
*/
#undef _PATH_LOGIN
#define _PATH_LOGIN "/bin/login"
/* Displayed before the login prompt.
* If ISSUE is not defined, getty will never display the contents of the
* /etc/issue file. You will not want to spit out large "issue" files at the
* wrong baud rate.
*/
#define ISSUE "/etc/issue"
/* Some shorthands for control characters */
#define CTL(x) ((x) ^ 0100) /* Assumes ASCII dialect */
#define CR CTL('M') /* carriage return */
#define NL CTL('J') /* line feed */
#define BS CTL('H') /* back space */
#define DEL CTL('?') /* delete */
/* Defaults for line-editing etc. characters; you may want to change this */
#define DEF_ERASE DEL /* default erase character */
#define DEF_INTR CTL('C') /* default interrupt character */
#define DEF_QUIT CTL('\\') /* default quit char */
#define DEF_KILL CTL('U') /* default kill char */
#define DEF_EOF CTL('D') /* default EOF char */
#define DEF_EOL '\n'
#define DEF_SWITCH 0 /* default switch char */
/*
* When multiple baud rates are specified on the command line,
* the first one we will try is the first one specified.
*/
#define MAX_SPEED 10 /* max. nr. of baud rates */
struct globals {
unsigned timeout; /* time-out period */
const char *login; /* login program */
const char *fakehost;
const char *tty; /* name of tty */
const char *initstring; /* modem init string */
const char *issue; /* alternative issue file */
int numspeed; /* number of baud rates to try */
int speeds[MAX_SPEED]; /* baud rates to be tried */
unsigned char eol; /* end-of-line char seen (CR or NL) */
struct termios termios; /* terminal mode bits */
char line_buf[128];
};
#define G (*ptr_to_globals)
#define INIT_G() do { \
SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \
} while (0)
//usage:#define getty_trivial_usage
//usage: "[OPTIONS] BAUD_RATE[,BAUD_RATE]... TTY [TERMTYPE]"
//usage:#define getty_full_usage "\n\n"
//usage: "Open a tty, prompt for a login name, then invoke /bin/login\n"
//usage: "\nOptions:"
//usage: "\n -h Enable hardware (RTS/CTS) flow control"
//usage: "\n -i Don't display /etc/issue"
//usage: "\n -L Local line, set CLOCAL on it"
//usage: "\n -m Get baud rate from modem's CONNECT status message"
//usage: "\n -w Wait for CR or LF before sending /etc/issue"
//usage: "\n -n Don't prompt for a login name"
//usage: "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue"
//usage: "\n -l LOGIN Invoke LOGIN instead of /bin/login"
//usage: "\n -t SEC Terminate after SEC if no username is read"
//usage: "\n -I INITSTR Send INITSTR before anything else"
//usage: "\n -H HOST Log HOST into the utmp file as the hostname"
//usage: "\n"
//usage: "\nBAUD_RATE of 0 leaves it unchanged"
static const char opt_string[] ALIGN1 = "I:LH:f:hil:mt:wn";
#define F_INITSTRING (1 << 0) /* -I */
#define F_LOCAL (1 << 1) /* -L */
#define F_FAKEHOST (1 << 2) /* -H */
#define F_CUSTISSUE (1 << 3) /* -f */
#define F_RTSCTS (1 << 4) /* -h */
#define F_NOISSUE (1 << 5) /* -i */
#define F_LOGIN (1 << 6) /* -l */
#define F_PARSE (1 << 7) /* -m */
#define F_TIMEOUT (1 << 8) /* -t */
#define F_WAITCRLF (1 << 9) /* -w */
#define F_NOPROMPT (1 << 10) /* -n */
/* convert speed string to speed code; return <= 0 on failure */
static int bcode(const char *s)
{
int value = bb_strtou(s, NULL, 10); /* yes, int is intended! */
if (value < 0) /* bad terminating char, overflow, etc */
return value;
return tty_value_to_baud(value);
}
/* parse alternate baud rates */
static void parse_speeds(char *arg)
{
char *cp;
/* NB: at least one iteration is always done */
debug("entered parse_speeds\n");
while ((cp = strsep(&arg, ",")) != NULL) {
G.speeds[G.numspeed] = bcode(cp);
if (G.speeds[G.numspeed] < 0)
bb_error_msg_and_die("bad speed: %s", cp);
/* note: arg "0" turns into speed B0 */
G.numspeed++;
if (G.numspeed > MAX_SPEED)
bb_error_msg_and_die("too many alternate speeds");
}
debug("exiting parse_speeds\n");
}
/* parse command-line arguments */
static void parse_args(char **argv)
{
char *ts;
int flags;
opt_complementary = "-2:t+"; /* at least 2 args; -t N */
flags = getopt32(argv, opt_string,
&G.initstring, &G.fakehost, &G.issue,
&G.login, &G.timeout
);
if (flags & F_INITSTRING) {
G.initstring = xstrdup(G.initstring);
/* decode \ddd octal codes into chars */
strcpy_and_process_escape_sequences((char*)G.initstring, G.initstring);
}
argv += optind;
debug("after getopt\n");
/* We loosen up a bit and accept both "baudrate tty" and "tty baudrate" */
G.tty = argv[0]; /* tty name */
ts = argv[1]; /* baud rate(s) */
if (isdigit(argv[0][0])) {
/* A number first, assume it's a speed (BSD style) */
G.tty = ts; /* tty name is in argv[1] */
ts = argv[0]; /* baud rate(s) */
}
parse_speeds(ts);
applet_name = xasprintf("getty: %s", G.tty);
if (argv[2])
xsetenv("TERM", argv[2]);
debug("exiting parse_args\n");
}
/* set up tty as standard input, output, error */
static void open_tty(void)
{
/* Set up new standard input, unless we are given an already opened port */
if (NOT_LONE_DASH(G.tty)) {
if (G.tty[0] != '/')
G.tty = xasprintf("/dev/%s", G.tty); /* will leak it */
/* Open the tty as standard input */
debug("open(2)\n");
close(0);
xopen(G.tty, O_RDWR | O_NONBLOCK); /* uses fd 0 */
/* Set proper protections and ownership */
fchown(0, 0, 0); /* 0:0 */
fchmod(0, 0620); /* crw--w---- */
} else {
/*
* Standard input should already be connected to an open port. Make
* sure it is open for read/write.
*/
if ((fcntl(0, F_GETFL) & (O_RDWR|O_RDONLY|O_WRONLY)) != O_RDWR)
bb_error_msg_and_die("stdin is not open for read/write");
}
}
/* We manipulate termios this way:
* - first, we read existing termios settings
* - termios_init modifies some parts and sets it
* - auto_baud and/or BREAK processing can set different speed and set termios
* - termios_final again modifies some parts and sets termios before
* execing login
*/
static void termios_init(int speed)
{
/* Flush input and output queues, important for modems!
* Users report losing previously queued output chars, and I hesitate
* to use tcdrain here instead of tcflush - I imagine it can block.
* Using small sleep instead.
*/
usleep(100*1000); /* 0.1 sec */
tcflush(STDIN_FILENO, TCIOFLUSH);
/* Set speed if it wasn't specified as "0" on command line */
if (speed != B0)
cfsetspeed(&G.termios, speed);
/*
* Initial termios settings: 8-bit characters, raw-mode, blocking i/o.
* Special characters are set after we have read the login name; all
* reads will be done in raw mode anyway. Errors will be dealt with
* later on.
*/
G.termios.c_cflag = CS8 | HUPCL | CREAD;
if (option_mask32 & F_LOCAL)
G.termios.c_cflag |= CLOCAL;
G.termios.c_iflag = 0;
G.termios.c_lflag = 0;
G.termios.c_oflag = OPOST | ONLCR;
G.termios.c_cc[VMIN] = 1;
G.termios.c_cc[VTIME] = 0;
#ifdef __linux__
G.termios.c_line = 0;
#endif
#ifdef CRTSCTS
if (option_mask32 & F_RTSCTS)
G.termios.c_cflag |= CRTSCTS;
#endif
tcsetattr_stdin_TCSANOW(&G.termios);
debug("term_io 2\n");
}
static void termios_final(void)
{
/* General terminal-independent stuff */
G.termios.c_iflag |= IXON | IXOFF; /* 2-way flow control */
G.termios.c_lflag |= ICANON | ISIG | ECHO | ECHOE | ECHOK | ECHOKE;
/* no longer in lflag: | ECHOCTL | ECHOPRT */
G.termios.c_oflag |= OPOST;
/* G.termios.c_cflag = 0; */
G.termios.c_cc[VINTR] = DEF_INTR;
G.termios.c_cc[VQUIT] = DEF_QUIT;
G.termios.c_cc[VEOF] = DEF_EOF;
G.termios.c_cc[VEOL] = DEF_EOL;
#ifdef VSWTC
G.termios.c_cc[VSWTC] = DEF_SWITCH;
#endif
/* Account for special characters seen in input */
if (G.eol == CR) {
G.termios.c_iflag |= ICRNL; /* map CR in input to NL */
/* already done by termios_init */
/* G.termios.c_oflag |= ONLCR; map NL in output to CR-NL */
}
G.termios.c_cc[VKILL] = DEF_KILL;
#ifdef CRTSCTS
/* Optionally enable hardware flow control */
if (option_mask32 & F_RTSCTS)
G.termios.c_cflag |= CRTSCTS;
#endif
/* Finally, make the new settings effective */
if (tcsetattr_stdin_TCSANOW(&G.termios) < 0)
bb_perror_msg_and_die("tcsetattr");
}
/* extract baud rate from modem status message */
static void auto_baud(void)
{
int nread;
/*
* This works only if the modem produces its status code AFTER raising
* the DCD line, and if the computer is fast enough to set the proper
* baud rate before the message has gone by. We expect a message of the
* following format:
*
* <junk><number><junk>
*
* The number is interpreted as the baud rate of the incoming call. If the
* modem does not tell us the baud rate within one second, we will keep
* using the current baud rate. It is advisable to enable BREAK
* processing (comma-separated list of baud rates) if the processing of
* modem status messages is enabled.
*/
/*
* Don't block if input queue is empty.
* Errors will be dealt with later on.
*/
G.termios.c_cc[VMIN] = 0; /* don't block if queue empty */
tcsetattr_stdin_TCSANOW(&G.termios);
/*
* Wait for a while, then read everything the modem has said so far and
* try to extract the speed of the dial-in call.
*/
sleep(1);
nread = safe_read(STDIN_FILENO, G.line_buf, sizeof(G.line_buf) - 1);
if (nread > 0) {
int speed;
char *bp;
G.line_buf[nread] = '\0';
for (bp = G.line_buf; bp < G.line_buf + nread; bp++) {
if (isdigit(*bp)) {
speed = bcode(bp);
if (speed > 0)
cfsetspeed(&G.termios, speed);
break;
}
}
}
/* Restore terminal settings. Errors will be dealt with later on */
G.termios.c_cc[VMIN] = 1; /* restore to value set by termios_init */
tcsetattr_stdin_TCSANOW(&G.termios);
}
/* get user name, establish parity, speed, erase, kill, eol;
* return NULL on BREAK, logname on success
*/
static char *get_logname(void)
{
char *bp;
char c;
/* Flush pending input (esp. after parsing or switching the baud rate) */
usleep(100*1000); /* 0.1 sec */
tcflush(STDIN_FILENO, TCIOFLUSH);
/* Prompt for and read a login name */
G.line_buf[0] = '\0';
while (!G.line_buf[0]) {
/* Write issue file and prompt */
#ifdef ISSUE
if (!(option_mask32 & F_NOISSUE))
print_login_issue(G.issue, G.tty);
#endif
print_login_prompt();
/* Read name, watch for break, parity, erase, kill, end-of-line */
bp = G.line_buf;
G.eol = '\0';
while (1) {
/* Do not report trivial EINTR/EIO errors */
errno = EINTR; /* make read of 0 bytes be silent too */
if (read(STDIN_FILENO, &c, 1) < 1) {
if (errno == EINTR || errno == EIO)
exit(EXIT_SUCCESS);
bb_perror_msg_and_die(bb_msg_read_error);
}
/* BREAK. If we have speeds to try,
* return NULL (will switch speeds and return here) */
if (c == '\0' && G.numspeed > 1)
return NULL;
/* Do erase, kill and end-of-line processing */
switch (c) {
case CR:
case NL:
*bp = '\0';
G.eol = c;
goto got_logname;
case BS:
case DEL:
G.termios.c_cc[VERASE] = c;
if (bp > G.line_buf) {
full_write(STDOUT_FILENO, "\010 \010", 3);
bp--;
}
break;
case CTL('U'):
while (bp > G.line_buf) {
full_write(STDOUT_FILENO, "\010 \010", 3);
bp--;
}
break;
case CTL('D'):
exit(EXIT_SUCCESS);
default:
if ((unsigned char)c < ' ') {
/* ignore garbage characters */
} else if ((int)(bp - G.line_buf) < sizeof(G.line_buf) - 1) {
/* echo and store the character */
full_write(STDOUT_FILENO, &c, 1);
*bp++ = c;
}
break;
}
} /* end of get char loop */
got_logname: ;
} /* while logname is empty */
return G.line_buf;
}
int getty_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int getty_main(int argc UNUSED_PARAM, char **argv)
{
int n;
pid_t pid;
char *logname;
INIT_G();
G.login = _PATH_LOGIN; /* default login program */
#ifdef ISSUE
G.issue = ISSUE; /* default issue file */
#endif
G.eol = CR;
/* Parse command-line arguments */
parse_args(argv);
logmode = LOGMODE_NONE;
/* Create new session, lose controlling tty, if any */
/* docs/ctty.htm says:
* "This is allowed only when the current process
* is not a process group leader" - is this a problem? */
setsid();
/* close stdio, and stray descriptors, just in case */
n = xopen(bb_dev_null, O_RDWR);
/* dup2(n, 0); - no, we need to handle "getty - 9600" too */
xdup2(n, 1);
xdup2(n, 2);
while (n > 2)
close(n--);
/* Logging. We want special flavor of error_msg_and_die */
die_sleep = 10;
msg_eol = "\r\n";
/* most likely will internally use fd #3 in CLOEXEC mode: */
openlog(applet_name, LOG_PID, LOG_AUTH);
logmode = LOGMODE_BOTH;
#ifdef DEBUGGING
dbf = xfopen_for_write(DEBUGTERM);
for (n = 1; argv[n]; n++) {
debug(argv[n]);
debug("\n");
}
#endif
/* Open the tty as standard input, if it is not "-" */
/* If it's not "-" and not taken yet, it will become our ctty */
debug("calling open_tty\n");
open_tty();
ndelay_off(0);
debug("duping\n");
xdup2(0, 1);
xdup2(0, 2);
/*
* The following ioctl will fail if stdin is not a tty, but also when
* there is noise on the modem control lines. In the latter case, the
* common course of action is (1) fix your cables (2) give the modem more
* time to properly reset after hanging up. SunOS users can achieve (2)
* by patching the SunOS kernel variable "zsadtrlow" to a larger value;
* 5 seconds seems to be a good value.
*/
if (tcgetattr(STDIN_FILENO, &G.termios) < 0)
bb_perror_msg_and_die("tcgetattr");
pid = getpid();
#ifdef __linux__
// FIXME: do we need this? Otherwise "-" case seems to be broken...
// /* Forcibly make fd 0 our controlling tty, even if another session
// * has it as a ctty. (Another session loses ctty). */
// ioctl(STDIN_FILENO, TIOCSCTTY, (void*)1);
/* Make ourself a foreground process group within our session */
tcsetpgrp(STDIN_FILENO, pid);
#endif
/* Update the utmp file. This tty is ours now! */
update_utmp(pid, LOGIN_PROCESS, G.tty, "LOGIN", G.fakehost);
/* Initialize the termios settings (raw mode, eight-bit, blocking i/o) */
debug("calling termios_init\n");
termios_init(G.speeds[0]);
/* Write the modem init string and DON'T flush the buffers */
if (option_mask32 & F_INITSTRING) {
debug("writing init string\n");
full_write1_str(G.initstring);
}
/* Optionally detect the baud rate from the modem status message */
debug("before autobaud\n");
if (option_mask32 & F_PARSE)
auto_baud();
/* Set the optional timer */
alarm(G.timeout); /* if 0, alarm is not set */
/* Optionally wait for CR or LF before writing /etc/issue */
if (option_mask32 & F_WAITCRLF) {
char ch;
debug("waiting for cr-lf\n");
while (safe_read(STDIN_FILENO, &ch, 1) == 1) {
debug("read %x\n", (unsigned char)ch);
if (ch == '\n' || ch == '\r')
break;
}
}
logname = NULL;
if (!(option_mask32 & F_NOPROMPT)) {
/* NB: termios_init already set line speed
* to G.speeds[0] */
int baud_index = 0;
while (1) {
/* Read the login name */
debug("reading login name\n");
logname = get_logname();
if (logname)
break;
/* We are here only if G.numspeed > 1 */
baud_index = (baud_index + 1) % G.numspeed;
cfsetspeed(&G.termios, G.speeds[baud_index]);
tcsetattr_stdin_TCSANOW(&G.termios);
}
}
/* Disable timer */
alarm(0);
/* Finalize the termios settings */
termios_final();
/* Now the newline character should be properly written */
full_write(STDOUT_FILENO, "\n", 1);
/* Let the login program take care of password validation */
/* We use PATH because we trust that root doesn't set "bad" PATH,
* and getty is not suid-root applet */
/* With -n, logname == NULL, and login will ask for username instead */
BB_EXECLP(G.login, G.login, "--", logname, NULL);
bb_error_msg_and_die("can't execute '%s'", G.login);
}