:(

.SRCINFO

@@ -1,20 +0,0 @@
-pkgbase = device-mapper-openrc
-	pkgdesc = OpenRC device-mapper init script
-	pkgver = 20210106
-	pkgrel = 1
-	arch = any
-	license = GPL2
-	depends = device-mapper
-	depends = openrc
-	provides = init-device-mapper
-	conflicts = init-device-mapper
-	backup = etc/conf.d/device-mapper
-	source = device-mapper.confd
-	source = device-mapper.initd
-	source = dmeventd.initd
-	sha256sums = 57777904f12a35617e5a4193c964ebb32396452487fd02353e71e16e7b46bc22
-	sha256sums = 630fbe07721c2a264c1b2f0195caf658c591bdef13cb82d5605bb489f59971a4
-	sha256sums = b4b91555f1486754717073dae83715d1e03adfdd5e56d80be8ac9689a85bc717
-
-pkgname = device-mapper-openrc
-

PKGBUILD

@@ -1,27 +0,0 @@
-# Maintainer: m00n <lmarianski@protonmail.com>
-# Contributor: artoo <artoo@artixlinux.org>
-
-pkgname=device-mapper-openrc
-pkgver=20210106
-pkgrel=1
-pkgdesc="OpenRC device-mapper init script"
-arch=('any')
-license=('GPL2')
-provides=('init-device-mapper')
-depends=('device-mapper' 'openrc')
-conflicts=('init-device-mapper')
-backup=('etc/conf.d/device-mapper')
-source=("device-mapper.confd"
-        "device-mapper.initd"
-        "dmeventd.initd")
-sha256sums=('57777904f12a35617e5a4193c964ebb32396452487fd02353e71e16e7b46bc22'
-            '630fbe07721c2a264c1b2f0195caf658c591bdef13cb82d5605bb489f59971a4'
-            'b4b91555f1486754717073dae83715d1e03adfdd5e56d80be8ac9689a85bc717')
-
-package() {
-    install -Dm755 "${srcdir}"/device-mapper.confd "${pkgdir}"/etc/openrc/conf.d/device-mapper
-
-    for f in device-mapper dmeventd; do
-        install -Dm755 "${srcdir}"/"$f".initd "${pkgdir}"/etc/openrc/init.d/"$f"
-    done
-}

device-mapper.initd

@@ -1,5 +1,5 @@
-#!/usr/bin/openrc-run
+#!/sbin/openrc-run
-# Copyright 1999-2016 Gentoo Foundation
+# Copyright 1999-2019 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 
 depend() {
@@ -30,7 +30,7 @@ build_dmsetup_command() {
 	# If there's just one line:
 	if [ ${count} -eq 1 ] ; then
 		echo "echo $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \
-			  grep ${1} | awk '{$1=""; print $0}') | /usr/bin/dmsetup create ${1}"
+			  grep ${1} | awk '{$1=""; print $0}') | /sbin/dmsetup create ${1}"
 
 	# For all cases with more lines:
 	elif [ ${count} -gt 1 ] ; then
@@ -46,7 +46,7 @@ build_dmsetup_command() {
 							 grep ${1} | awk NR==${c}\ \{\$1=\"\"\;\ print\ \$0\})"
 			fi
 		done
-		echo "${dmsetup_cmd} | /usr/bin/dmsetup create ${1}"
+		echo "${dmsetup_cmd} | /sbin/dmsetup create ${1}"
 	fi
 
 	return 0
@@ -80,7 +80,7 @@ dmvolume_exists() {
 
 	[ -z "${volume}" ] && return 1
 
-	/usr/bin/dmsetup ls 2>/dev/null | \
+	/sbin/dmsetup ls 2>/dev/null | \
 	while read line ; do
 		for x in ${line} ; do
 			# the following conditonal return only breaks out
@@ -106,7 +106,7 @@ dmvolume_exists() {
 is_empty_dm_volume() {
 	local table volume=$1
 
-	set -- $(/usr/bin/dmsetup table 2>/dev/null | grep -e "^${volume}:")
+	set -- $(/sbin/dmsetup table 2>/dev/null | grep -e "^${volume}:")
 	[ "${volume}" = "$1" -a -z "$2" ]
 }
 
@@ -120,7 +120,7 @@ start() {
 
 	local x volume
 
-	if [ -x /usr/bin/dmsetup -a -c /dev/mapper/control -a -f /etc/dmtab ] ; then
+	if [ -x /sbin/dmsetup -a -c /dev/mapper/control -a -f /etc/dmtab ] ; then
 		[ -n "$(get_new_dm_volumes)" ] && \
 			einfo " Setting up device-mapper volumes:"
 
@@ -136,7 +136,7 @@ start() {
 				# dmsetup still adds an empty volume in some cases,
 				#  so lets remove it
 				is_empty_dm_volume "${volume}" && \
-					/usr/bin/dmsetup remove "${volume}" 2>/dev/null
+					/sbin/dmsetup remove "${volume}" 2>/dev/null
 			else
 				eend 0
 			fi

dmeventd.initd

@@ -1,9 +1,13 @@
-#!/usr/bin/openrc-run
+#!/sbin/openrc-run
-# Copyright 1999-2016 Gentoo Foundation
+# Copyright 1999-2019 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 
-PIDFILE=/run/dmeventd.pid
+command=/sbin/dmeventd
-BIN=/usr/bin/dmeventd
+command_args_foreground='-f'
+extra_started_commands=reload
+pidfile=/run/dmeventd.pid
+# Control idle exit behavior of daemon
+export DMEVENTD_IDLE_EXIT_TIMEOUT=${DMEVENTD_IDLE_EXIT_TIMEOUT:=-1}
 
 depend() {
 	# As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that
@@ -11,15 +15,7 @@ depend() {
 	after lvm device-mapper
 }
 
-start() {
+reload() {
-	ebegin "Starting dmeventd"
+	# TODO: this is not supported under supervisors
-	start-stop-daemon --start --exec $BIN --pidfile $PIDFILE
+	${command} -R
-	eend $?
 }
-
-stop() {
-	ebegin "Stopping dmeventd"
-	start-stop-daemon --stop --exec $BIN --pidfile $PIDFILE
-	eend $?
-}
-

dmtab

@@ -0,0 +1,11 @@
+#/etc/dmraid: config file for adding device-mapper volumes at boot
+
+# Format: <volume name>: <table>
+# Example: isw0: 0 312602976 striped 2 128 /dev/sda 0 /dev/sdb 0
+#
+# Alternatively you can create all your volumes the first time, and just run:
+#
+#   dmsetup table >> /etc/dmtab
+#
+# and verify that they are correct.
+

lvm-monitoring.initd

@@ -0,0 +1,38 @@
+#!/sbin/openrc-run
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+# This script is based on upstream file
+# LVM2.2.02.67/scripts/lvm2_monitoring_init_red_hat.in
+
+depend() {
+	# As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that
+	# means dmeventd is NOT notified, as it cannot be safely running
+	need lvm dmeventd
+}
+
+VGCHANGE=/sbin/vgchange
+VGS=/sbin/vgs
+
+start() {
+	ret=0
+	# TODO do we want to separate out already active groups only?
+	VGSLIST=`$VGS --noheadings -o name --rows 2> /dev/null`
+	ebegin "Starting LVM monitoring for VGs ${VGSLIST}:"
+	$VGCHANGE --monitor y --poll y  ${VGSLIST}
+	ret=$?
+	eend $ret
+	return $ret
+
+}
+
+stop() {
+	ret=0
+	# TODO do we want to separate out already active groups only?
+	VGSLIST=`$VGS --noheadings -o name --rows 2> /dev/null`
+	ebegin "Stopping LVM monitoring for VGs ${VGSLIST}:"
+	$VGCHANGE --monitor n ${VGSLIST}
+	ret=$?
+	eend $ret
+	return $ret
+}

lvm.confd

@@ -0,0 +1,9 @@
+# If LVM is built with udev, you must ensure udev is running first!
+# Otherwise it will hang
+rc_need="udev"
+
+# LVM should normally only be started after mdraid is available
+# this is because LVM physical volumes are very often MD devices.
+rc_after="mdraid"
+
+# vim: ft=gentoo-conf-d

lvm.initd

@@ -0,0 +1,173 @@
+#!/sbin/openrc-run
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+_get_lvm_path() {
+	local lvm_path=
+	for lvm_path in /bin/lvm /sbin/lvm ; do
+		[ -x "${lvm_path}" ] && break
+	done
+	echo "${lvm_path}"
+}
+
+_use_lvmetad() {
+	local lvm_path="$(_get_lvm_path)"
+	[ ! -x "${lvm_path}" ] && return 1
+	${lvm_path} dumpconfig global 2>/dev/null | grep -q 'use_lvmetad=1'
+}
+
+_use_lvmlockd() {
+	local lvm_path="$(_get_lvm_path)"
+	[ ! -x "${lvm_path}" ] && return 1
+	${lvm_path} dumpconfig global 2>/dev/null | grep -q 'use_lvmlockd=1'
+}
+
+depend() {
+	before checkfs fsck
+	after modules device-mapper
+	# We may want lvmetad based on the configuration. If we added lvmetad
+	# support while lvm2 is running then we aren't dependent on it. For the
+	# more common case, if its disabled in the config we aren't dependent
+	# on it.
+	config /etc/lvm/lvm.conf
+	local _want=
+
+	if service_started ; then
+		_want=$(service_get_value want)
+	else
+		if _use_lvmetad ; then
+			_want="${_want} lvmetad"
+		fi
+
+		if _use_lvmlockd ; then
+			_want="${_want} lvmlockd"
+		fi
+	fi
+
+	# Make sure you review /etc/conf.d/lvm as well!
+	# Depending on your system, it might also introduce udev & mdraid
+	need sysfs
+
+	if [ -n "${_want}" ] ; then
+		want ${_want}
+	fi
+}
+
+config='global { locking_dir = "/run/lock/lvm" }'
+
+dm_in_proc() {
+	local retval=0
+	for x in devices misc ; do
+		grep -qs 'device-mapper' /proc/${x}
+		retval=$((${retval} + $?))
+	done
+	return ${retval}
+}
+
+start() {
+	# LVM support for /usr, /home, /opt ....
+	# This should be done *before* checking local
+	# volumes, or they never get checked.
+
+	# NOTE: Add needed modules for LVM or RAID, etc
+	#       to /etc/modules.autoload if needed
+
+	lvm_path="$(_get_lvm_path)"
+	if [ -z "${lvm_path}" ] ; then
+		eerror "Failed to find lvm binary in /bin or /sbin!"
+		return 1
+	fi
+
+	if [ -z "${CDBOOT}" ] ; then
+		if [ -e /proc/modules ] && ! dm_in_proc ; then
+			ebegin "Trying to load dm-mod module"
+			modprobe dm-mod 2>/dev/null
+			eend $?
+		fi
+
+		if [ -d /proc/lvm ] || dm_in_proc ; then
+			local has_errors=0 verbose_command
+
+			yesno "${rc_verbose}" && verbose_command=" -v"
+
+			ebegin "Starting the Logical Volume Manager"
+
+			if _use_lvmetad ; then
+				# Extra PV find pass because some devices might not have been available until very recently
+				${lvm_path} pvscan${verbose_command} --config "${config}" --cache
+				[ $? -ne 0 ] && has_errors=1
+			fi
+
+			# Now make the nodes
+			${lvm_path} vgscan${verbose_command} --config "${config}" --mknodes
+			[ $? -ne 0 ] && has_errors=1
+
+			# Enable all VGs
+			${lvm_path} vgchange${verbose_command} --config "${config}" --sysinit --activate y
+			[ $? -ne 0 ] && has_errors=1
+
+			if _use_lvmlockd ; then
+				# Start lockd VGs as required
+				${lvm_path} vgchange${verbose_command} --config "${config}" --lock-start --lock-opt auto
+				[ $? -ne 0 ] && has_errors=1
+			fi
+
+			eend ${has_errors} "Failed to start the Logical Volume Manager"
+		fi
+	fi
+}
+
+start_post() {
+	local _want=
+	if _use_lvmetad ; then
+		_want="${_want} lvmetad"
+	fi
+
+	if _use_lvmlockd ; then
+		_want="${_want} lvmlockd"
+	fi
+
+	service_set_value want "${_want}"
+}
+
+stop() {
+	lvm_path="$(_get_lvm_path)"
+	if [ -z "${lvm_path}" ] ; then
+		eerror "Failed to find lvm binary in /bin or /sbin!"
+		return 1
+	fi
+
+	# Stop LVM2
+	if [ -f /etc/lvmtab -o -d /etc/lvm ] \
+		&& [ -d /proc/lvm  -o "$(grep device-mapper /proc/misc 2>/dev/null)" ]
+	then
+		local VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings --nosuffix --rows 2> /dev/null)
+		if [ -z "${VGS}" ] ; then
+			# nothing to do for us
+			return 0
+		fi
+
+		local has_errors=0 verbose_command eend_cmd="eend"
+
+		yesno "${rc_verbose}" && verbose_command=" -v"
+
+		local msg="Failed to stop Logical Volume Manager"
+		if [ "${RC_RUNLEVEL}" = shutdown ] ; then
+			# failures on shutdown are non-fatal
+			eend_cmd="ewend"
+			msg="${msg} (possibly some LVs still needed for /usr or root)"
+		fi
+
+		ebegin "Stopping the Logical Volume Manager"
+
+		${lvm_path} vgchange${verbose_command} --config "${config}" --sysinit --activate n
+		[ $? -ne 0 ] && has_errors=1
+
+		${eend_cmd} ${has_errors} "${msg}"
+	fi
+
+	# at this point make sure we always exit without indicating an error
+	return 0
+}
+
+# vim:ts=4

lvmlockd.initd

@@ -0,0 +1,17 @@
+#!/sbin/openrc-run
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+pidfile="/run/lvmlockd.pid"
+command="/sbin/lvmlockd"
+command_args="${LVMLOCKD_OPTS:--p ${pidfile}} ${LVMLOCKD_TYPE:--g sanlock}"
+start_stop_daemon_args="--pidfile ${pidfile}"
+
+depend() {
+	before sanlock
+}
+
+start_pre()
+{
+	checkpath --directory /run/lvm || return 1
+}

lvmpolld.initd

@@ -0,0 +1,17 @@
+#!/sbin/openrc-run
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+pidfile="/run/lvmpolld.pid"
+command="/sbin/lvmpolld"
+command_args="${LVMPOLLD_OPTS:=-p ${pidfile}}"
+start_stop_daemon_args="--pidfile ${pidfile}"
+
+depend() {
+	:
+}
+
+start_pre()
+{
+	checkpath --directory /run/lvm || return 1
+}