ndhc/ifchd/README.ifchd

192 lines
7.7 KiB
Plaintext
Raw Normal View History

2010-11-12 14:32:18 +05:30
ifchd, copyright (c) 2004 Nicholas Kain. Licensed under GNU GPL.
Requirements:
Linux kernel (tested: 2.4, 2.6)
* libcap is required (available via ftp.kernel.org)
C99-compliant C compiler (for C99 struct subobject init)
* any modern GCC should be sufficient
Tested with glibc 2.2.x and 2.3.x. dietlibc is not compatible. I have not yet
tested uclibc.
I may bother to port to other operating systems, but don't count on it. Other
OSes lack the functionality of a [RSBAC|SELinux]+PaX enabled kernel, so I find
them to be less useful for a highly secured system.
INTRODUCTION
------------
ndhc consists of a set of daemons that cooperate in order to provide
privilege-seperated dhcp client services. Each daemon runs with the minimal
necessary privileges in order to perform its task. Currently, ndhc consists of
two daemons: the eponymous ndhc and ifchd.
ndhc communicates with dhcp servers and handles the vagaries of the dhcp
client protocol. It runs as a non-root user inside a chroot. ndhc retains
only the minimum necessary set of privileges required to perform its duties.
These powers include the ability to bind to a low port, the ability to open a
raw socket, and the ability to communicate on broadcast channels. ndhc holds
no other powers and is restricted to a chroot that contains nothing more than a
domain socket filesystem object and (at least on Linux) a urandom device node.
ifchd handles interface change requests. It listens on a UNIX domain socket
for such requests, and denies any client that does not match an authorized gid,
uid, or pid. ifchd runs as a non-root user inside a chroot, and retains only
the power to configure network interfaces. ifchd is designed so that it has
the ability to service multiple client requests simultaneously; a single ifchd
is sufficient for multiple ndhc clients. Only exotic setups should require
this functionality, but it does exist.
Note that ndhc does not support the entire DHCP client protocol. Only the
minimum necessary featureset is implemented. This behavior should be familiar
to anyone who has used software that purports to be be secure.
Many of the features that ndhc depends upon are not entirely standard and vary
between UNIX systems. It is likely that some effort will be required in order
to port ndhc to new systems. The ndhc daemon should be entirely portable aside
from its use of Linux-style POSIX capabilities.
ifchd is necessarily less portable, since it must use system-specific ioctls in
order to configure network interfaces. Additionally, ifchd uses extensions to
the UNIX domain socket family to limit connections to user defined subsets of
possible uids, gids, and pids. These extensions are present in Linux and BSD,
although both Linux and BSD have different interfaces for the functionality.
Patches that provide support for new systems are welcome.
USAGE
-----
1) Compile and install ifchd and ndhc.
a) Build ifchd with "make"
b) Enter ndhc directory and build ndhc with "make"
c) Install the ifchd and ndhc executables in a normal place. I would
suggest /usr/sbin or /usr/local/sbin.
2) Time to create the jail in which ifchd and ndhc will run.
a) Become root and create new group "ifchd".
$ su -
# umask 077
# groupadd ifchd
b) Create new users "ifchd" and "dhcp". The primary group of these
users should be "ifchd".
# useradd -d /var/lib/ndhc -g ifchd ifchd
# useradd -d /var/lib/ndhc -g ifchd dhcp
b) Create the jail directory and set its ownership properly.
# mkdir /var/lib/ndhc
# chown ifchd.ifchd /var/lib/ndhc
# chmod a+rx /var/lib/ndhc
c) Create a urandom device for ndhc to use within the jail.
# cd /var/lib/ndhc
# mkdir dev
# mknod dev/urandom c 1 9
# chown -R root.root dev
# chmod a+rx dev
# chmod a+r dev/urandom
d) (optional) If you wish for logging to properly work, you
will need to properly configure your logging daemon so that it
opens a domain socket in the proper location within the jail.
Since this varies per-daemon, I cannot provide a general
configuration.
3) At this point the jail is usable; ifchd and ndhc are ready to
be used. As an example of a sample configuration, here is my
rc.dhcp:
--START--
#!/bin/sh
case "$1" in
start)
ifchd -i eth0 -p /var/run/ifchd.pid -u ifchd -g ifchd -U dhcp -G ifchd \
-c /var/lib/ndhc &> /dev/null
ndhc -b -i eth0 -u dhcp -C /var/lib/ndhc &> /dev/null
;;
stop)
killall ndhc ifchd
;;
esac
--END--
This script works fine with my personal machines, which are set up
exactly as I have outlined above. If you have not entirely followed my
directions, the script will of course require modifications.
4o) If you encounter problems, I suggest running both ifchd and ndhc in the
foreground, and perhaps compiling ndhc with extra debugging output
(uncomment DEBUG=1 in the Makefile).
BEHAVIOR NOTES
--------------
ifchd does not enable updates of the local hostname and resolv.conf by default.
If you wish to enable these functions, use the --resolve (-r) and --hostname
(-o) flags. See ifchd --help.
ifchd can be set such that it only allows clients to configure particular
network interfaces. The --interface (-i) argument does the trick, and may
be used multiple times to allow multiple interfaces.
RSBAC NOTES
-----------
I was personally unable to get ifchd to properly function with RSBAC_NET_DEV
enabled. Browsing the rsbac source, I was unable to figure out what I was
doing incorrectly -- my RC definitions were as far as I could tell, correct.
Therefore, my directions assume that you have disabled RSBAC_NET_DEV in your
kernel configuration.
The normal usage directions may be followed, but an additional step for rsbac
is necessary. Change to your secoff account and invoke rsbac_fd_menu on the
ifchd and ndhc executables. The AUTH capability for your ifchd and dhcp groups
must be allowed on the corresponding executables, otherwise ifchd and ndhc will
be unable to change to a non-root user and will refuse to run.
GRSECURITY NOTES
----------------
Make sure that CONFIG_GRKERNSEC_CHROOT_CAPS is disabled. Otherwise, ifchd will
lose its capabilities (in particular, the ability to reconfigure interfaces)
when it chroots.
PORTING NOTES
-------------
Unportable functions are isolated to linux.c. Any attempts to port ifchd to
other platforms should isolate platform-dependent code to similarly named
compilation units (eg: for FreeBSD, freebsd.[ch]).
There are four major functions that ifchd depends upon that are not generally
portable. First, it uses the SO_PEERCRED flag of getsockopt() to discriminate
authorized connections by uid, gid, and pid. Similar functionality exists in
at least the BSDs; however, it has a different API. Second, ifchd takes
advantage of Linux capabilities so that it does not need full root privileges.
Capabilities are supposedly a POSIX feature, but in practice, they vary greatly
from system to system. Third and fourth, ifchd configures network interfaces
and routes. Interface and route configuration is entirely non-portable,
usually requiring calls to the catch-all ioctl(), and will almost certainly
require platform-dependent code.
Some standard C libraries include a native implementation of strlcpy() and
2010-11-12 16:12:07 +05:30
strlcat(). Such defines may conflict with my implementations in strl.c/strl.h.
It is up to the user whether the standard C library implementations should be
used. Note that some machines implement strlcpy() and strlcat() with
nonstandard semantics (notably Solaris). On these systems, using the
system-provided implementations may lead to security problems. Such problems
are the fault of the vendor. If you are unsure whether your system is correct
or not, I suggest using the implementation that I provide.
2010-11-12 14:32:18 +05:30