.TH NDHC 8 2012-07-20 Linux "Linux Administrator's Manual" .SH NAME ndhc \- secure DHCP client .SH SYNOPSIS .B ndhc .RI [ OPTION ]... .SH DESCRIPTION The ndhc client negotiates a lease with the DHCP server and informs ifchd of the change when it is obtained or lost. It also defends the assigned IP address against hostile imposters and requests a new lease if it detects that the interface has been connected to a new network. It requires a cooperating ifchd server to properly perform its duties. .SH OPTIONS .TP .BI \-c\ CONFIGFILE ,\ \-\-config= CONFIGFILE Read configuration information from the specified file. The format of configuration options is a simple 'option = value' for each line. The names of the options are exactly the same as for command line options. .TP .BI \-I\ CLIENTID ,\ \-\-clientid= CLIENTID Specifies the client identifier that will be sent to the remote server. This can be any (reasonably sized, <64byte or so) text string, or an ethernet MAC address in a form similar to 'aa:bb:cc:dd:ee:ff'. ndhc is smart enough to recognize MAC addresses. ISP DHCP servers commonly check the value of this field before providing a lease. The default value is the MAC address of the network interface to which ndhc is bound. .TP .BI \-h\ HOSTNAME ,\ \-\-hostname= HOSTNAME Send the specified client hostname to the remote DHCP server. This option should not be necessary in most instances, but may perhaps be useful for odd DHCP servers that perform some kind of authentication against the hostname option field. The default is to send no hostname option at all. .TP .BI \-v\ VENDORID ,\ \-\-vendorid= VENDORID Send the specified vendor identification string to the remote DHCP server. This option should not be necessary in most instances, but may perhaps be useful for odd DHCP servers that perform some kind of authentication against the vendor id option field. The default is to send the string 'ndhc'. .TP .BI \-s\ STATEDIR ,\ \-\-state\-dir= STATEDIR Specifies the directory where the DHCP state associated with the given interface will be stored. Such state will include the leased IP, the IAID, and the DUID. The file representing the leased IP can be quite useful for reacting to changes in IP address -- one can listen for changes to it using fanotify() or inotify() on Linux. .TP .BI \-i\ INTERFACE ,\ \-\-interface= INTERFACE Act as a DHCP client for the specified interface. A single ndhc daemon can only act as a DHCP client for a single interface. Specify the interface it should use by name. The default is to listen on 'eth0'. .TP .BI \-n ,\ \-\-now Exit with failure if a lease cannot be obtained. Useful for some init scripts. .TP .BI \-r\ IP ,\ \-\-request= IP Request the specified IP address from the remote DHCP server. The DHCP server has no obligation to provide us with this IP, but it may acquiesce to the request if it would not conflict with another host. .TP .BI \-u\ USER ,\ \-\-user= USER This option specifies the user name or user id that ndhc will change to after startup. ndhc will also change its group to match the default group of this user. .TP .BI \-U\ USER ,\ \-\-ifch\-user= USER This option specifies the user name or user id that ndhc-ifch will change to after startup. ndhc-ifch will also change its group to match the default group of this user. .TP .BI \-C\ CHROOTDIR ,\ \-\-chroot= CHROOTDIR This option specifies the directory to which ndhc should confine itself via chroot() after startup. This directory should have access to dev/urandom and dev/null. For logging to work, a dev/log socket or device should also exist. .TP .BI \-d ,\ \-\-relentless\-defense If specified, ndhc will never back down in defending the IP address that it has been assigned by the remote DHCP server. This behavior should not be specified for average machines, but is useful for servers or routers where the IP address of the machine must remain fixed for proper operation. .TP .BI \-R\ RESOLVCONF ,\ \-\-resolv\-conf= RESOLVCONF Specifies the path to the system resolv.conf. This file will typically be in /etc/resolv.conf. If this option is specified, ndhc will update the contents of this file to match the DNS servers specified by the remote DHCP server. If this option is not specified, ifchd will never change the system DNS resolution configuration. .TP .BI \-H ,\ \-\-dhcp\-set\-hostname If specified, ndhc will update the system host name in response to any hostname option field provided by a remote DHCP server on the request of a ndhc client. If this option is not specified, ndhc will never change the system hostname. .TP .BI \-w\ TIMEMS ,\ \-\-arp\-probe\-wait= TIMEMS Adjusts the time that we wait for an ARP response when checking to see if our lease assignment is already taken by an existing host. Default is 1000ms. .TP .BI \-W\ NUMPROBES ,\ \-\-arp\-probe\-num= NUMPROBES Adjusts the number of ARP packets that we send when probing for collisions with an existing host that is using our assigned IP. Once we have sent the specified number of probe packets with no response, ndhc is willing to believe that there is no colliding host. Default number is 3 probes. .TP .BI \-m\ TIMEMS ,\ \-\-arp\-probe\-min= TIMEMS Adjusts the minimum time that we wait between sending probe packets. The default is 1000ms. The precise inter-probe wait time is randomized. .TP .BI \-M\ TIMEMS ,\ \-\-arp\-probe\-max= TIMEMS Adjusts the maximum time that we wait between sending probe packets. The default is 2000ms. The precise inter-probe wait time is randomized. .TP .BI \-t\ GWMETRIC ,\ \-\-gw\-metric= GWMETRIC Specifies the routing metric for the default gateway entry. Defaults to 0 if not specified. Higher values will de-prioritize the route entry. .TP .BI \-K\ RFKILLIDX ,\ \-\-rfkill\-idx= RFKILLIDX If set, specifies the rfkill device index that corresponds to this interface. ndhc will then listen for matching radio frequency kill switch events and will bring the interface up and down in reaction to the events. The rfkill devices can be found in /sys/class/rfkill/rfkill. It may be useful to check the contents of the 'name' file within this directory to determine the correct device index. In any event, if an rfkill-idx parameter is specified, ndhc will print messages for any rfkill events that it sees, so it should not be too difficult to locate the proper rfkill device by checking the logs after hitting the switch. .TP .BI \-v ,\ \-\-version Display the ndhc version number. .SH SIGNALS It is not necessary to sleep between sending signals, as signals received are processed sequentially in the order they are received. .B ndhc responds to the following signals: .TP .B SIGUSR1 This signal causes .B ndhc to renew the current lease or, if it does not have one, obtain a new lease. .TP .B SIGUSR2 This signal causes .B ndhc to release the current lease and go to sleep until it receives a SIGUSR1. .SH NOTES ndhc will seed its random number generator (used for generating xids) by reading /dev/urandom. If you have a lot of embedded systems on the same network, with no entropy, you can either seed /dev/urandom by a method of your own, or doing the following on startup: ifconfig eth0 > /dev/urandom in order to seed /dev/urandom with some data (mac address) unique to your system. If reading /dev/urandom fails, ndhc will fall back to seeding with time(0).