From 838c9efb36b3b058c5a5b9d0e8c6d4d4789a44b9 Mon Sep 17 00:00:00 2001 From: William Hubbs Date: Mon, 18 Mar 2013 18:29:36 -0500 Subject: [PATCH] Remove gentoo's net.* scripts It has been determined that it will be best for gentoo's net.* scripts to be in a separate package to allow independent development. This package will be called netifrc and maintained by Gentoo. --- Makefile | 5 - README | 2 +- README.newnet | 4 - conf.d/Makefile | 4 +- conf.d/net | 4 - doc/.gitignore | 1 - doc/Makefile | 11 - doc/net.example.BSD.in | 445 ------------- doc/net.example.Linux.in | 1247 ----------------------------------- init.d/Makefile | 17 +- init.d/net.lo.in | 789 ---------------------- mk/net.mk | 1 + net/.gitignore | 2 - net/Makefile | 24 - net/adsl.sh | 74 --- net/apipa.sh | 48 -- net/arping.sh | 131 ---- net/bonding.sh | 223 ------- net/br2684ctl.sh | 50 -- net/bridge.sh | 190 ------ net/ccwgroup.sh | 106 --- net/clip.sh | 221 ------- net/dhclient.sh | 76 --- net/dhcpcd.sh | 88 --- net/ethtool.sh | 52 -- net/firewalld.sh | 38 -- net/ifconfig.sh.BSD.in | 264 -------- net/ifconfig.sh.Linux.in | 328 --------- net/ifplugd.sh | 94 --- net/ifwatchd.sh | 59 -- net/ip6rd.sh | 175 ----- net/ip6to4.sh | 116 ---- net/ipppd.sh | 48 -- net/iproute2.sh | 404 ------------ net/iwconfig.sh.BSD.in | 593 ----------------- net/iwconfig.sh.Linux.in | 763 --------------------- net/macchanger.sh | 92 --- net/macnet.sh | 19 - net/macvlan.sh | 53 -- net/netplugd.sh | 96 --- net/pppd.sh | 243 ------- net/pump.sh | 59 -- net/ssidnet.sh | 24 - net/system.sh | 122 ---- net/tuntap.sh | 102 --- net/udhcpc.sh | 110 --- net/vlan.sh | 146 ---- net/wpa_supplicant.sh | 212 ------ runlevels/Makefile | 10 +- sh/.gitignore | 3 - sh/Makefile | 8 +- sh/ifwatchd-carrier.sh.in | 5 - sh/ifwatchd-nocarrier.sh.in | 5 - sh/udhcpc-hook.sh.in | 117 ---- 54 files changed, 16 insertions(+), 8107 deletions(-) delete mode 100644 conf.d/net delete mode 100644 doc/.gitignore delete mode 100644 doc/Makefile delete mode 100644 doc/net.example.BSD.in delete mode 100644 doc/net.example.Linux.in delete mode 100644 init.d/net.lo.in create mode 100644 mk/net.mk delete mode 100644 net/.gitignore delete mode 100644 net/Makefile delete mode 100644 net/adsl.sh delete mode 100644 net/apipa.sh delete mode 100644 net/arping.sh delete mode 100644 net/bonding.sh delete mode 100644 net/br2684ctl.sh delete mode 100644 net/bridge.sh delete mode 100644 net/ccwgroup.sh delete mode 100644 net/clip.sh delete mode 100644 net/dhclient.sh delete mode 100644 net/dhcpcd.sh delete mode 100644 net/ethtool.sh delete mode 100644 net/firewalld.sh delete mode 100644 net/ifconfig.sh.BSD.in delete mode 100644 net/ifconfig.sh.Linux.in delete mode 100644 net/ifplugd.sh delete mode 100644 net/ifwatchd.sh delete mode 100644 net/ip6rd.sh delete mode 100644 net/ip6to4.sh delete mode 100644 net/ipppd.sh delete mode 100644 net/iproute2.sh delete mode 100644 net/iwconfig.sh.BSD.in delete mode 100644 net/iwconfig.sh.Linux.in delete mode 100644 net/macchanger.sh delete mode 100644 net/macnet.sh delete mode 100644 net/macvlan.sh delete mode 100644 net/netplugd.sh delete mode 100644 net/pppd.sh delete mode 100644 net/pump.sh delete mode 100644 net/ssidnet.sh delete mode 100644 net/system.sh delete mode 100644 net/tuntap.sh delete mode 100644 net/udhcpc.sh delete mode 100644 net/vlan.sh delete mode 100644 net/wpa_supplicant.sh delete mode 100644 sh/ifwatchd-carrier.sh.in delete mode 100644 sh/ifwatchd-nocarrier.sh.in delete mode 100644 sh/udhcpc-hook.sh.in diff --git a/Makefile b/Makefile index 45fee28e..119a27e7 100644 --- a/Makefile +++ b/Makefile @@ -6,11 +6,6 @@ include Makefile.inc SUBDIR= conf.d etc init.d local.d man scripts sh src sysctl.d -# Build our old net foo or not -ifeq (${MKNET},oldnet) -SUBDIR+= net doc -endif - # Build pkgconfig or not MKPKGCONFIG?= yes ifeq (${MKPKGCONFIG},yes) diff --git a/README b/README index e787ea76..44d27ca2 100644 --- a/README +++ b/README @@ -10,7 +10,7 @@ You may wish to tweak the installation with the below arguments PROGLDFLAGS=-static LIBNAME=lib64 DESTDIR=/tmp/openrc-image -MKNET=oldnet +MKNET=no MKPAM=pam MKPREFIX=yes MKPKGCONFIG=no diff --git a/README.newnet b/README.newnet index 2e157e2b..41db1c51 100644 --- a/README.newnet +++ b/README.newnet @@ -1,7 +1,3 @@ -The following applies only to the newnet stack, which is not presently -maintained in OpenRC. The oldnet stack is maintained instead. -- Robin H. Johnson , 2011/02/21 - OpenRC Network Ideals --------------------- diff --git a/conf.d/Makefile b/conf.d/Makefile index 24db5891..aefb6121 100644 --- a/conf.d/Makefile +++ b/conf.d/Makefile @@ -1,8 +1,10 @@ +include ../mk/net.mk + DIR= ${CONFDIR} CONF= bootmisc fsck hostname localmount netmount urandom tmpfiles \ ${CONF-${OS}} -ifeq (${MKNET},) +ifeq (${MKNET},yes) CONF+= network staticroute TARGETS+= network staticroute CLEANFILES+= network staticroute diff --git a/conf.d/net b/conf.d/net deleted file mode 100644 index 52a03e36..00000000 --- a/conf.d/net +++ /dev/null @@ -1,4 +0,0 @@ -# This blank configuration will automatically use DHCP for any net.* -# scripts in /etc/init.d. To create a more complete configuration, -# please review /usr/share/doc/openrc*/net.example* and save your configuration -# in /etc/conf.d/net (this file :]!). diff --git a/doc/.gitignore b/doc/.gitignore deleted file mode 100644 index a2c6f833..00000000 --- a/doc/.gitignore +++ /dev/null @@ -1 +0,0 @@ -net.example diff --git a/doc/Makefile b/doc/Makefile deleted file mode 100644 index 8fbf3e8b..00000000 --- a/doc/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -DIR= ${DOCDIR}/openrc -SRCS= net.example.in -INC= net.example - -MK= ../mk -include ${MK}/os.mk - -%.example.in: %.example${SFX} - ${CP} $< $@ - -include ${MK}/scripts.mk diff --git a/doc/net.example.BSD.in b/doc/net.example.BSD.in deleted file mode 100644 index 3aae310c..00000000 --- a/doc/net.example.BSD.in +++ /dev/null @@ -1,445 +0,0 @@ -############################################################################## -# QUICK-START -# -# The quickest start is if you want to use DHCP. -# In that case, everything should work out of the box, no configuration -# necessary, though the startup script will warn you that you haven't -# specified anything. - -# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6 -# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have -# the relevant kernel option enabled. So if you don't have an IPv6 enabled -# kernel then remove the IPv6 address from your config. - -# If you want to use a static address or use DHCP explicitly, jump -# down to the section labeled INTERFACE HANDLERS. -# -# If you want to do anything more fancy, you should take the time to -# read through the rest of this file. - -############################################################################## -# MODULES -# -# We now support modular networking scripts which means we can easily -# add support for new interface types and modules while keeping -# compatibility with existing ones. -# -# Modules load by default if the package they need is installed. If -# you specify a module here that doesn't have its package installed -# then you get an error stating which package you need to install. -# Ideally, you only use the modules setting when you have two or more -# packages installed that supply the same service. -# -# In other words, you probably should DO NOTHING HERE... - -############################################################################## -# INTERFACE HANDLERS - -# For a static configuration, use something like this -#config_eth0="192.168.0.2/24" - -# If you need more than one address, you can use something like this -# NOTE: ifconfig creates an aliased device for each extra IPv4 address -# (eth0:1, eth0:2, etc) -# iproute2 does not do this as there is no need to -#config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24" - -# You can also use IPv6 addresses -# (you should always specify a prefix length with IPv6 here) -#config_eth0="192.168.0.2/24 4321:0:1:2:3:4:567:89ab/64 4321:0:1:2:3:4:567:89ac/64" - -# If you wish to keep existing addresses + routing and the interface is up, -# you can specify a noop (no operation). If the interface is down or there -# are no addresses assigned, then we move onto the next step (default dhcp) -# This is useful when configuring your interface with a kernel command line -# or similar -#config_eth0="noop 192.168.0.2/24" - -# If you don't want ANY address (only useful when calling for advanced stuff) -#config_eth0="null" - -# Here's how to do routing if you need it -# We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route -#routes_eth0="default via 192.168.0.1 -#10.0.0.0/8 via 192.168.0.1 -#::/0" - -# If a specified module fails (like dhcp - see below), you can specify a -# fallback like so -#fallback_eth0="192.168.0.2 netmask 255.255.255.0" -#fallback_routes_eth0="default via 192.168.0.1" - -# NOTE: fallback entry must match the entry location in config_eth0 -# As such you can only have one fallback route. -# Also, if you do not set a fallback_routes entry for an interface, the -# routes entry will be used if that is set. - -# Some users may need to alter the MTU - here's how -#mtu_eth0="1500" - -# Most drivers that report carrier status function correctly, but some do not -# One of these faulty drivers is for the Intel e1000 network card, but only -# at boot time. To get around this you may alter the carrier_timeout value for -# the interface. 0 is disable and any other number of seconds is how -# long we wait for carrier. The current default is disabled. -#carrier_timeout_eth0=0 - -# You may wish to disable the interface being brought down when stopping. -# This is only of use for WakeOnLan. -#ifdown_eth0="NO" - -############################################################################## -# OPTIONAL MODULES - -#----------------------------------------------------------------------------- -# WIRELESS (802.11 support) -# Wireless can be provided by BSDs ifconfig (iwconfig) or wpa_supplicant -# wpa_supplicant is preferred, use the modules directive to prefer iwconfig. -#modules="iwconfig" - -# ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon -# that scans, associates and re-configures if association is lost. -# We call it iwconfig to separate the wireless setup from ifconfig. -#################################### -# HINTS -# -# Most users will just need to set the following options -# key_SSID1="s:yourkeyhere enc open" # s: means a text key -# key_SSID2="aaaa-bbbb-cccc-dd" # no s: means a hex key -# preferred_aps="SSID1 SSID2" -# -# Clear? Good. Now configure your wireless network below - -#################################### -# SETTINGS -# Hard code an SSID to an interface - leave this unset if you wish the driver -# to scan for available Access Points -# I would only set this as a last resort really - use the preferred_aps -# setting at the bottom of this file -#essid_eth0='foo' - -# Some drivers/hardware don't scan all that well. We have no control over this -# but we can say how many scans we want to do to try and get a better sweep of -# the area. The default is 1. -#scans_eth0="1" - -#Channel can be set (1-14), but defaults to 3 if not set. -# -# The below is taken verbatim from the BSD wavelan documentation found at -# http://www.netbsd.org/Documentation/network/wavelan.html -# There are 14 channels possible; We are told that channels 1-11 are legal for -# North America, channels 1-13 for most of Europe, channels 10-13 for France, -# and only channel 14 for Japan. If in doubt, please refer to the documentation -# that came with your card or access point. Make sure that the channel you -# select is the same channel your access point (or the other card in an ad-hoc -# network) is on. The default for cards sold in North America and most of Europe -# is 3; the default for cards sold in France is 11, and the default for cards -# sold in Japan is 14. -#channel_eth0="3" - -# Setup any other config commands. This is basically the ifconfig argument -# without the ifconfig $iface. -#ifconfig_eth0="" -# You can do the same per SSID too. -#ifconfig_SSID="" - -# Seconds to wait until associated. The default is to wait 10 seconds. -# 0 means wait indefinitely. WARNING: this can cause an infinite delay when -# booting. -#associate_timeout_eth0="5" - -# Define a WEP key per SSID or MAC address (of the AP, not your card) -# The encryption type (open or restricted) must match the -# encryption type on the Access Point. -# To set a hex key, prefix with 0x -#key_SSID="0x12341234123412341234123456" -# or you can use strings. Passphrase IS NOT supported -#key_SSID="foobar" -#key_SSID="foobar" - -# WEP key for the AP with MAC address 001122334455 -#mac_key_001122334455="foobar" - -# You can also override the interface settings found in /etc/conf.d/net -# per SSID - which is very handy if you use different networks a lot -#config_SSID="dhcp" -#routes_SSID= -#fallback_SSID= - -# Setting name/domain server causes /etc/resolv.conf to be overwritten -# Note that if DHCP is used, and you want this to take precedence then -# please put -R in your dhcpcd options -#dns_servers_SSID="192.168.0.1 192.168.0.2" -#dns_domain_SSID="some.domain" -#dns_search_SSID="search.this.domain search.that.domain" -# Please check the man page for resolv.conf for more information -# as domain and search (searchdomains) are mutually exclusive and -# searchdomains takes precedence - -# You can also set any of the /etc/conf.d/net variables per MAC address -# incase you use Access Points with the same SSID but need different -# networking configs. Below is an example - of course you use the same -# method with other variables -#config_001122334455="dhcp" -#dns_servers_001122334455="192.168.0.1 192.168.0.2" - -# Map a MAC address to an SSID -# This is used when the Access Point is not broadcasting its SSID -# WARNING: This will override the SSID being broadcast due to some -# Access Points sending an SSID even when they have been configured -# not to! -# Change 001122334455 to the MAC address and SSID to the SSID -# it should map to -#mac_essid_001122334455="SSID" - -# This lists the preferred SSIDs to connect to in order -# SSID's can contain any characters here as they must match the broadcast -# SSID exactly. -# Surround each SSID with the " character and separate them with a space -# If the first SSID isn't found then it moves onto the next -# If this isn't defined then it connects to the first one found -#preferred_aps="SSID1 SSID2" - -# You can also define a preferred_aps list per interface -#preferred_aps_eth0="SSID3 SSID4" - -# You can also say whether we only connect to preferred APs or not -# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly" -# and "forceany" -# "any" means it will connect to visible APs in the preferred list and then -# any other available AP -# "preferredonly" means it will only connect to visible APs in the preferred -# list -# "forcepreferred" means it will forcibly connect to APs in order if it does -# not find them in a scan -# "forcepreferredonly" means it forcibly connects to the APs in order and -# does not bother to scan -# "forceany" does the same as forcepreferred + connects to any other -# available AP -# Default is "any" -#associate_order="any" -#associate_order_eth0="any" - -# You can define blacklisted Access Points in the same way -#blacklist_aps="SSID1 SSID2" -#blacklist_aps_eth0="SSID3 SSID4" - -# If you have more than one wireless card, you can say if you want -# to allow each card to associate with the same Access Point or not -# Values are "yes" and "no" -# Default is "yes" -#unique_ap="yes" -#unique_ap_eth0="yes" - -# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when -# essid_eth0 is not set and your card is capable of scanning - -# NOTE: preferred_aps list ignores blacklisted_aps - so if you have -# the same SSID in both, well, you're a bit silly :p - -################################################## -# wpa_supplicant -# emerge net-wireless/wpa_supplicant -# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf -# Consult the wpa_supplicant.conf.example that is installed in -# /usr/share/doc/wpa_supplicant - -# By default we don't wait for wpa_supplicant to associate and authenticate. -# If you would like to, so can specify how long in seconds -#associate_timeout_eth0=60 -# A value of 0 means wait forever. - -# You can also override any settings found here per SSID - which is very -# handy if you use different networks a lot. See below for using the SSID -# in our variables -#config_SSID="dhcp" -# See the System module below for setting dns/nis/ntp per SSID - -# You can also override any settings found here per MAC address of the AP -# in case you use Access Points with the same SSID but need different -# networking configs. Below is an example - of course you use the same -# method with other variables -#mac_config_001122334455="dhcp" -#mac_dns_servers_001122334455="192.168.0.1 192.168.0.2" - -# When an interface has been associated with an Access Point, a global -# variable called SSID is set to the Access Point's SSID for use in the -# pre/post user functions below (although it's not available in preup as you -# won't have associated then) - -# If you're using anything else to configure wireless on your interface AND -# you have installed wpa_supplicant, you need to disable wpa_supplicant -#modules="!iwconfig !wpa_supplicant" -#or -#modules="!wireless" - -############################################################################## -# WIRELESS SSID IN VARIABLES -############################################################################## -# Remember to change SSID to your SSID. -# Say that your SSID is My NET - the line -# #key_SSID="s:passkey" -# becomes -# #key_My_NET="s:passkey" -# Notice that the space has changed to an underscore - do the same with all -# characters not in a-z A-Z (English alphabet) 0-9. This only applies to -# variables and not values. -# -# Any SSID's in values like essid_eth0="My NET" may need to be escaped -# This means placing the character \ before the character -# \" need to be escaped for example -# So if your SSID is -# My "\ NET -# it becomes -# My \"\\ NET -# for example -# #essid_eth0="My\"\\NET" -# -# So using the above we can use -# #dns_domain_My____NET="My\"\\NET" -# which is an invalid dns domain, but shows the how to use the variable -# structure -######################################################### - -#----------------------------------------------------------------------------- -# DHCP -# DHCP can be provided by dhclient. -# -# dhcpcd: emerge net-misc/dhcpcd -# dhclient: emerge net-misc/dhcp - -# Regardless of which DHCP client you prefer, you configure them the -# same way using one of following depending on which interface modules -# you're using. -#config_eth0="dhcp" - -# For passing custom options to dhcpcd use something like the following. This -# example reduces the timeout for retrieving an address from 60 seconds (the -# default) to 10 seconds. -#dhcpcd_eth0="-t 10" - -# GENERIC DHCP OPTIONS -# Set generic DHCP options like so -#dhcp_eth0="release nodns nontp nonis nogateway nosendhost" - -# This tells the dhcp client to release its lease when it stops, not to -# overwrite dns, ntp and nis settings, not to set a default route and not to -# send the current hostname to the dhcp server and when it starts. -# You can use any combination of the above options - the default is not to -# use any of them. - - -#----------------------------------------------------------------------------- -# System -# For configuring system specifics such as domain, dns, ntp and nis servers -# It's rare that you would need todo this, but you can anyway. -# This is most benefit to wireless users who don't use DHCP so they can change -# their configs based on SSID. - -# If you omit the _eth0 suffix, then it applies to all interfaces unless -# overridden by the interface suffix. -#dns_domain_eth0="your.domain" -#dns_servers_eth0="192.168.0.2 192.168.0.3" -#dns_search_eth0="this.domain that.domain" -#dns_options_eth0="timeout:1 rotate" -#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0" -# See the man page for resolv.conf for details about the options and sortlist -# directives - -#ntp_servers_eth0="192.168.0.2 192.168.0.3" - -#nis_domain_eth0="domain" -#nis_servers_eth0="192.168.0.2 192.168.0.3" - -# NOTE: Setting any of these will stamp on the files in question. So if you -# don't specify dns_servers but you do specify dns_domain then no nameservers -# will be listed in /etc/resolv.conf even if there were any there to start -# with. -# If this is an issue for you then maybe you should look into a resolv.conf -# manager like resolvconf-gentoo to manage this file for you. All packages -# that baselayout supports use resolvconf-gentoo if installed. - -#----------------------------------------------------------------------------- -# Cable in/out detection -# Sometimes the cable is in, others it's out. Obviously you don't want to -# restart net.eth0 every time when you plug it in either. -# BSD has the Device State Change Daemon - or devd for short -# To enable this, simple add devd to the boot runlevel -#rc-update add devd boot -#rc - -############################################################################## -# ADVANCED CONFIGURATION -# -# Four functions can be defined which will be called surrounding the -# start/stop operations. The functions are called with the interface -# name first so that one function can control multiple adapters. An extra two -# functions can be defined when an interface fails to start or stop. -# -# The return values for the preup and predown functions should be 0 -# (success) to indicate that configuration or deconfiguration of the -# interface can continue. If preup returns a non-zero value, then -# interface configuration will be aborted. If predown returns a -# non-zero value, then the interface will not be allowed to continue -# deconfiguration. -# -# The return values for the postup, postdown, failup and faildown functions are -# ignored since there's nothing to do if they indicate failure. -# -# ${IFACE} is set to the interface being brought up/down -# ${IFVAR} is ${IFACE} converted to variable name bash allows -# -# For historical and compatibility reasons, preup is actually normally called -# in the following sequence: up ; preup ; up. -# The first up causes the kernel to initialize the device, so -# that it is available for use in the preup function. However, for some -# hardware, e.g. CAN devices, some configuration is needed before trying to up -# the interface will actually work. For such hardware, the -# up_before_preup variables will allow skipping the first up call if set -# to yes. -#up_before_preup_IFVAR="NO" -#up_before_preup="NO" - -#preup() { -# # Remember to return 0 on success -# return 0 -#} - -#predown() { -# # The default in the script is to test for NFS root and disallow -# # downing interfaces in that case. Note that if you specify a -# # predown() function you will override that logic. Here it is, in -# # case you still want it... -# if is_net_fs /; then -# eerror "root filesystem is network mounted -- can't stop ${IFACE}" -# return 1 -# fi -# -# # Remember to return 0 on success -# return 0 -#} - -#postup() { -# # This function could be used, for example, to register with a -# # dynamic DNS service. Another possibility would be to -# # send/receive mail once the interface is brought up. - -#} - -#postdown() { -# # Return 0 always -# return 0 -#} - -#failup() { -# # This function is mostly here for completeness... I haven't -# # thought of anything nifty to do with it yet ;-) -#} - -#faildown() { -# # This function is mostly here for completeness... I haven't -# # thought of anything nifty to do with it yet ;-) -#} - -# You should note that we don't stop the network at system shutdown by default. -# If you really need this, then set keep_network=NO diff --git a/doc/net.example.Linux.in b/doc/net.example.Linux.in deleted file mode 100644 index d8fa0842..00000000 --- a/doc/net.example.Linux.in +++ /dev/null @@ -1,1247 +0,0 @@ -############################################################################## -# QUICK-START -# -# The quickest start is if you want to use DHCP. -# In that case, everything should work out of the box, no configuration -# necessary, though the startup script will warn you that you haven't -# specified anything. - -# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6 -# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have -# the relevant kernel option enabled. So if you don't have an IPv6 enabled -# kernel then remove the IPv6 address from your config. - -# If you want to use a static address or use DHCP explicitly, jump -# down to the section labeled INTERFACE HANDLERS. -# -# If you want to do anything more fancy, you should take the time to -# read through the rest of this file. - - -############################################################################## -# MODULES -# -# We now support modular networking scripts which means we can easily -# add support for new interface types and modules while keeping -# compatibility with existing ones. -# -# Modules load by default if the package they need is installed. If -# you specify a module here that doesn't have its package installed -# then you get an error stating which package you need to install. -# Ideally, you only use the modules setting when you have two or more -# packages installed that supply the same service. -# -# In other words, you probably should DO NOTHING HERE... - -# Prefer ifconfig over iproute2 -#modules="!iproute2" - -# You can also specify other modules for an interface -# In this case we prefer udhcpc over dhcpcd -#modules_eth0="udhcpc" - -# You can also specify which modules not to use - for example you may be -# using a supplicant or linux-wlan-ng to control wireless configuration but -# you still want to configure network settings per SSID associated with. -#modules="!iwconfig !wpa_supplicant" -# IMPORTANT: If you need the above, please disable modules in that order - - -############################################################################## -# INTERFACE HANDLERS -# -# We provide two interface handlers presently: ifconfig and iproute2. -# You need one of these to do any kind of network configuration. -# For ifconfig support, emerge sys-apps/net-tools -# For iproute2 support, emerge sys-apps/iproute2 - -# If you don't specify an interface then we prefer iproute2 if it's installed -# To prefer ifconfig over iproute2 -#modules="!iproute2" - -# For a static configuration, use something like this -# (They all do exactly the same thing btw) -#config_eth0="192.168.0.2/24" -#config_eth0="192.168.0.2 netmask 255.255.255.0" - -# If you need more than one address, you can use something like this -# NOTE: ifconfig creates an aliased device for each extra IPv4 address -# (eth0:1, eth0:2, etc) -# iproute2 does not do this as there is no need to -# WARNING: You cannot mix multiple addresses on a line with other parameters! -#config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24" -# However, that only works with CIDR addresses, so you can't use netmask. - -# You can also use IPv6 addresses -# (you should always specify a prefix length with IPv6 here) -#config_eth0="192.168.0.2/24 4321:0:1:2:3:4:567:89ab/64 4321:0:1:2:3:4:567:89ac/64" - -# If you wish to keep existing addresses + routing and the interface is up, -# you can specify a noop (no operation). If the interface is down or there -# are no addresses assigned, then we move onto the next step (default dhcp) -# This is useful when configuring your interface with a kernel command line -# or similar -#config_eth0="noop 192.168.0.2/24" - -# If you don't want ANY address (only useful when calling for advanced stuff) -#config_eth0="null" - -# If you need to pass parameters to go with an address, you can do so on the -# same line as the address. You should split multiple addresses with newlines. -# WARNING: You cannot mix multiple addresses on a line with other parameters! -#config_eth0="192.168.0.2/24 scope host" -#config_eth0="4321:0:1:2:3:4:567:89ab/64 nodad home preferred_lft 0" -#config_eth0="192.168.0.2/24 scope host -#4321:0:1:2:3:4:567:89ab/64 nodad home preferred_lft 0" - -# Here's how to do routing if you need it -# We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route -#routes_eth0="default via 192.168.0.1 -#10.0.0.0/8 via 192.168.0.1 -#::/0" - -# If a specified module fails (like dhcp - see below), you can specify a -# fallback like so -#fallback_eth0="192.168.0.2/24" -#fallback_routes_eth0="default via 192.168.0.1" - -# NOTE: fallback entry must match the entry location in config_eth0 -# As such you can only have one fallback route. -# Also, if you do not set a fallback_routes entry for an interface, the -# routes entry will be used if that is set. - -# Some users may need to alter the MTU - here's how -#mtu_eth0="1500" -# Same for TX Queue Length -#txqueuelen_eth0="1000" - -# Each module described below can set a default base metric, lower is -# preferred over higher. This is so we can prefer a wired route over a -# wireless route automatically. You can override this by setting -#metric_eth0="100" -# or on a global basis -#metric="100" -# The only downside of the global setting is that you have to ensure that -# there are no conflicting routes yourself. For users with large routing -# tables you may have to set a global metric as the due to a simple read of -# the routing table taking over a minute at a time. - -# Most drivers that report carrier status function correctly, but some do not -# One of these faulty drivers is for the Intel e1000 network card, but only -# at boot time. To get around this you may alter the carrier_timeout value for -# the interface. 0 is disable and any other number of seconds is how -# long we wait for carrier. The current default is disabled. -#carrier_timeout_eth0=0 - -# You may wish to disable the interface being brought down when stopping. -# This is only of use for WakeOnLan. -#ifdown_eth0="NO" - -############################################################################## -# OPTIONAL MODULES - -#----------------------------------------------------------------------------- -# WIRELESS (802.11 support) -# Wireless can be provided by iwconfig or wpa_supplicant -# wpa_supplicant is preferred, use the modules directive to prefer iwconfig. -#modules="iwconfig" -# -# iwconfig -# emerge net-wireless/wireless-tools -############################################### -# HINTS -# -# Most users will just need to set the following options -# key_SSID1="s:yourkeyhere enc open" # s: means a text key -# key_SSID2="aaaa-bbbb-cccc-dd" # no s: means a hex key -# preferred_aps="'SSID 1' 'SSID 2'" -# -# Clear? Good. Now configure your wireless network below - -############################################### -# SETTINGS -# Hard code an SSID to an interface - leave this unset if you wish the driver -# to scan for available Access Points -# Set to "any" to connect to any SSID - the driver picks an Access Point -# This needs to be done when the driver doesn't support scanning -# This may work for drivers that don't support scanning but you need automatic -# AP association -# I would only set this as a last resort really - use the preferred_aps -# setting at the bottom of this file - -# However, using ad-hoc (without scanning for APs) and master mode -# do require the SSID to be set - do this here -#essid_eth0="any" - -# Set the mode of the interface (managed, ad-hoc, master or auto) -# The default is auto -# If it's ad-hoc or master you also may need to specify the channel below -#mode_eth0="auto" - -# If managed mode fails, drop to ad-hoc mode with the below SSID? -#adhoc_essid_eth0="WLAN" - -# Some drivers/hardware don't scan all that well. We have no control over this -# but we can say how many scans we want to do to try and get a better sweep of -# the area. The default is 1. -#scans_eth0="1" - -#Channel can be set (1-14), but defaults to 3 if not set. -# -# The below is taken verbatim from the BSD wavelan documentation found at -# http://www.netbsd.org/Documentation/network/wavelan.html -# There are 14 channels possible; We are told that channels 1-11 are legal for -# North America, channels 1-13 for most of Europe, channels 10-13 for France, -# and only channel 14 for Japan. If in doubt, please refer to the documentation -# that came with your card or access point. Make sure that the channel you -# select is the same channel your access point (or the other card in an ad-hoc -# network) is on. The default for cards sold in North America and most of Europe -# is 3; the default for cards sold in France is 11, and the default for cards -# sold in Japan is 14. -#channel_eth0="3" - -# Setup any other config commands. This is basically the iwconfig argument -# without the iwconfig $iface. -#iwconfig_eth0="" - -# Set private driver ioctls. This is basically the iwpriv argument without -# the iwpriv $iface. If you use the rt2500 driver (not the rt2x00 one) then -# you can set WPA here, below is an example. -#iwpriv_eth0="" -#iwpriv_SSID="set AuthMode=WPAPSK -#set EncrypType=TKIP -#set WPAPSK=yourpasskey" -#NOTE: Even though you can use WPA like so, you may have to set a WEP key -#if your driver claims the AP is encrypted. The WEP key itself will not be -#used though. - -# Seconds to wait before scanning -# Some drivers need to wait until they have finished "loading" -# before they can scan - otherwise they error and claim that they cannot scan -# or resource is unavailable. The default is to wait zero seconds -#sleep_scan_eth0="1" - -# Seconds to wait until associated. The default is to wait 10 seconds. -# 0 means wait indefinitely. WARNING: this can cause an infinite delay when -# booting. -#associate_timeout_eth0="5" - -# By default a successful association in Managed mode sets the MAC -# address of the AP connected to. However, some drivers (namely -# the ipw2100) don't set an invalid MAC address when association -# fails - so we need to check on link quality which some drivers -# don't report properly either. -# So if you have connection problems try flipping this setting -# Valid options are MAC, quality and all - defaults to MAC -#associate_test_eth0="MAC" - -# Some driver/card combinations need to scan in Ad-Hoc mode -# After scanning, the mode is reset to the one defined above -#scan_mode_eth0="Ad-Hoc" - -# Below you can define private ioctls to run before and after scanning -# Format is the same as the iwpriv_eth0 above -# This is needed for the HostAP drivers -#iwpriv_scan_pre_eth0="'host_roaming 2'" -#iwpriv_scan_post_eth0="'host_roaming 0'" - -# Define a WEP key per SSID or MAC address (of the AP, not your card) -# The encryption type (open or restricted) must match the -# encryption type on the Access Point -# You can't use "any" for an SSID here -#key_SSID="1234-1234-1234-1234-1234-1234-56" -# or you can use strings. Passphrase IS NOT supported -# To use a string, prefix it with s: -# Note - this example also sets the encryption method to open -# which is regarded as more secure than restricted -#key_SSID="s:foobar enc open" -#key_SSID="s:foobar enc restricted" - -# If you have whitespace in your key, here's how to set it and use other -# commands like using open encryption. -#key_SSID="s:'foo bar' enc open" - -# WEP key for the AP with MAC address 001122334455 -#mac_key_001122334455="s:foobar" - -# Here are some more examples of keys as some users find others work -# and some don't where they should all do the same thing -#key_SSID="open s:foobar" -#key_SSID="open 1234-5678-9012" -#key_SSID="s:foobar enc open" -#key_SSID="1234-5678-9012 enc open" - -# You may want to set multiple keys - here's an example -# It sets 4 keys on the card and instructs to use key 2 by default -#key_SSID="[1] s:passkey1 key [2] s:passkey2 key [3] s:passkey3 key [4] s:passkey4 key [2]" - -# You can also override the interface settings found in /etc/conf.d/net -# per SSID - which is very handy if you use different networks a lot -#config_SSID="dhcp" -#dhcpcd_SSID="-t 5" -#routes_SSID= -#fallback_SSID= - -# Setting name/domain server causes /etc/resolv.conf to be overwritten -# Note that if DHCP is used, and you want this to take precedence then -# please put -R in your dhcpcd options -#dns_servers_SSID="192.168.0.1 192.168.0.2" -#dns_domain_SSID="some.domain" -#dns_search_SSID="search.this.domain search.that.domain" -# Please check the man page for resolv.conf for more information -# as domain and search (searchdomains) are mutually exclusive and -# searchdomains takes precedence - -# You can also set any of the /etc/conf.d/net variables per MAC address -# incase you use Access Points with the same SSID but need different -# networking configs. Below is an example - of course you use the same -# method with other variables -#config_001122334455="dhcp" -#dhcpcd_001122334455="-t 10" -#dns_servers_001122334455="192.168.0.1 192.168.0.2" - -# Map a MAC address to an SSID -# This is used when the Access Point is not broadcasting its SSID -# WARNING: This will override the SSID being broadcast due to some -# Access Points sending an SSID even when they have been configured -# not to! -# Change 001122334455 to the MAC address and SSID to the SSID -# it should map to -#mac_essid_001122334455="SSID" - -# This lists the preferred SSIDs to connect to in order -# SSID's can contain any characters here as they must match the broadcast -# SSID exactly. -# Surround each SSID with the " character and separate them with a space -# If the first SSID isn't found then it moves onto the next -# If this isn't defined then it connects to the first one found -#preferred_aps="SSID1 SSID2" - -# You can also define a preferred_aps list per interface -#preferred_aps_eth0="SSID3 SSID4" - -# You can also say whether we only connect to preferred APs or not -# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly" and "forceany" -# "any" means it will connect to visible APs in the preferred list and then any -# other available AP -# "preferredonly" means it will only connect to visible APs in the preferred list -# "forcepreferred" means it will forcibly connect to APs in order if it does not find -# them in a scan -# "forcepreferredonly" means it forcibly connects to the APs in order and does not bother -# to scan -# "forceany" does the same as forcepreferred + connects to any other available AP -# Default is "any" -#associate_order="any" -#associate_order_eth0="any" - -# You can define blacklisted Access Points in the same way -#blacklist_aps="SSID1 SSID2" -#blacklist_aps_eth0="SSID3 SSID4" - -# If you have more than one wireless card, you can say if you want -# to allow each card to associate with the same Access Point or not -# Values are "yes" and "no" -# Default is "yes" -#unique_ap="yes" -#unique_ap_eth0="yes" - -# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when -# essid_eth0 is not set and your card is capable of scanning - -# NOTE: preferred_aps list ignores blacklisted_aps - so if you have -# the same SSID in both, well, you're a bit silly :p - - -############################################################ -# wpa_supplicant -# emerge net-wireless/wpa_supplicant -# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf -# Consult the wpa_supplicant.conf.example that is installed in -# /usr/share/doc/wpa_supplicant -# To configure wpa_supplicant -#wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards -# Consult wpa_supplicant for more drivers - the default is -Dwext which should -# work for most cards. - -# By default we don't wait for wpa_supplicant to associate and authenticate. -# If you need to change this behaviour then you don't know how our scripts work -# and setting this value could cause strange things to happen. -# If you would like it to wait, you can specify how long in seconds. -#associate_timeout_eth0=60 -# A value of 0 means wait forever. - -# You can also override any settings found here per SSID - which is very -# handy if you use different networks a lot. See below for using the SSID -# in our variables -#config_SSID="dhcp" -# See the System module below for setting dns/nis/ntp per SSID - -# You can also override any settings found here per MAC address of the AP -# in case you use Access Points with the same SSID but need different -# networking configs. Below is an example - of course you use the same -# method with other variables -#mac_config_001122334455="dhcp" -#mac_dns_servers_001122334455="192.168.0.1 192.168.0.2" - -# When an interface has been associated with an Access Point, a global -# variable called SSID is set to the Access Point's SSID for use in the -# pre/post user functions below (although it's not available in preup as you -# won't have associated then) - -# If you're using anything else to configure wireless on your interface AND -# you have installed wpa_supplicant, you need to disable wpa_supplicant -#modules="!iwconfig !wpa_supplicant" -#or -#modules="!wireless" - -############################################################################## -# WIRELESS SSID IN VARIABLES -############################################################################## -# Remember to change SSID to your SSID. -# Say that your SSID is My NET - the line -# #key_SSID="s:passkey" -# becomes -# #key_My_NET="s:passkey" -# Notice that the space has changed to an underscore - do the same with all -# characters not in a-z A-Z (English alphabet) 0-9. This only applies to -# variables and not values. -# -# Any SSID's in values like essid_eth0="My NET" may need to be escaped -# This means placing the character \ before the character -# \" need to be escaped for example -# So if your SSID is -# My "\ NET -# it becomes -# My \"\\ NET -# for example -# #essid_eth0="My\"\\NET" -# -# So using the above we can use -# #dns_domain_My____NET="My\"\\NET" -# which is an invalid dns domain, but shows the how to use the variable -# structure -######################################################### - - -#----------------------------------------------------------------------------- -# DHCP -# DHCP can be provided by dhclient, dhcpcd, pump or udhcpc. -# -# dhclient: emerge net-misc/dhcp -# dhcpcd: emerge net-misc/dhcpcd -# pump: emerge net-misc/pump -# udhcpc: emerge sys-apps/busybox - -# If you have more than one DHCP client installed, you need to specify which -# one to use - otherwise we default to dhcpcd if available. -#modules="dhclient" # to select dhclient over dhcpcd -# -# Notes: -# - All clients send the current hostname to the DHCP server by default -# - dhcpcd does not daemonize when the lease time is infinite -# - udhcp-0.9.3-r3 and earlier do not support getting NTP servers -# - pump does not support getting NIS servers -# - DHCP tends to erase any existing device information - so add -# static addresses after dhcp if you need them -# - dhclient and udhcpc can set other resolv.conf options such as "option" -# and "sortlist"- see the System module for more details - -# Regardless of which DHCP client you prefer, you configure them the -# same way using one of following depending on which interface modules -# you're using. -#config_eth0="dhcp" - -# For passing custom options to dhcpcd use something like the following. This -# example reduces the timeout for retrieving an address from 60 seconds (the -# default) to 10 seconds. -#dhcpcd_eth0="-t 10" - -# dhclient, udhcpc and pump don't have many runtime options -# You can pass options to them in a similar manner to dhcpcd though -#dhclient_eth0="..." -#udhcpc_eth0="..." -#pump_eth0="..." - -# GENERIC DHCP OPTIONS -# Set generic DHCP options like so -#dhcp_eth0="release nodns nontp nonis nogateway nosendhost" - -# This tells the dhcp client to release its lease when it stops, not to -# overwrite dns, ntp and nis settings, not to set a default route and not to -# send the current hostname to the dhcp server and when it starts. -# You can use any combination of the above options - the default is not to -# use any of them. - -#----------------------------------------------------------------------------- -# For APIPA support, emerge net-misc/iputils or net-analyzer/arping - -# APIPA is a module that tries to find a free address in the range -# 169.254.0.0-169.254.255.255 by arping a random address in that range on the -# interface. If no reply is found then we assign that address to the interface - -# This is only useful for LANs where there is no DHCP server and you don't -# connect directly to the internet. -#config_eth0="dhcp" -#fallback_eth0="apipa" - -#----------------------------------------------------------------------------- -# ARPING Gateway configuration -# and -# Automatic Private IP Addressing (APIPA) -# For arpingnet / apipa support, emerge net-misc/iputils or net-analyzer/arping -# -# This is a module that tries to find a gateway IP. If it exists then we use -# that gateways configuration for our own. For the configuration variables -# simply ensure that each octet is zero padded and the dots are removed. -# Below is an example. -# -#gateways_eth0="192.168.0.1 10.0.0.1" -#config_192168000001="192.168.0.2/24" -#routes_192168000001="default via 192.168.0.1" -#dns_servers_192168000001="192.168.0.1" -#config_010000000001="10.0.0.254/8" -#routes_010000000001="default via 10.0.0.1" -#dns_servers_010000000001="10.0.0.1" - -# We can also specify a specific MAC address for each gateway if different -# networks have the same gateway. -#gateways_eth0="192.168.0.1,00:11:22:AA:BB:CC 10.0.0.1,33:44:55:DD:EE:FF" -#config_192168000001_001122AABBCC="192.168.0.2/24" -#routes_192168000001_001122AABBCC="default via 192.168.0.1" -#dns_servers_192168000001_001122AABBCC="192.168.0.1" -#config_010000000001_334455DDEEFF="10.0.0.254/8" -#routes_010000000001_334455DDEEFF="default via 10.0.0.1" -#dns_servers_010000000001_334455DDEEFF="10.0.0.1" - -# If you need to spoof the source address, you can add that as third parameter -# like so -#gateways_eth0="192.168.0.1,00:11:22:AA:BB:CC,192.168.0.50" -#or -#gateways_eth0="192.168.0.1,,192.168.0.50" -# This requires arping to be installed though - -# If we don't find any gateways (or there are none configured) then we try and -# use APIPA to find a free address in the range 169.254.0.0-169.254.255.255 -# by arping a random address in that range on the interface. If no reply is -# found then we assign that address to the interface. - -# This is only useful for LANs where there is no DHCP server. -#config_eth0="arping" - -# or if no DHCP server can be found -#config_eth0="dhcp" -#fallback_eth0="arping" - -# NOTE: We default to sleeping for 1 second the first time we attempt an -# arping to give the interface time to settle on the LAN. This appears to -# be a good default for most instances, but if not you can alter it here. -#arping_sleep=5 -#arping_sleep_lan=7 - -# NOTE: We default to waiting 3 seconds to get an arping response. You can -# change the default wait like so. -#arping_wait=3 -#arping_wait_lan=2 - -#----------------------------------------------------------------------------- -# VLAN (802.1q support) -# For VLAN support, emerge sys-apps/iproute2 -# The old vconfig based VLAN support is no longer available. - -# Specify the VLAN numbers for the interface like so -# Please ensure your VLAN IDs are NOT zero-padded -#vlans_eth0="1 2" - -# You may not want to assign an IP the the physical interface, but we still -# need it up. -#config_eth0="null" - -# You can also configure the VLAN - see for ip man page for more details -# To change the vlan interface name. If not set, the standard "iface.vlanid" -# will be used. This is the replacement for the old 'vconfig set_name_type' -# functionality. If you previously relied on the DEV_PLUS_VID or -# DEV_PLUS_VID_NO_PAD options to have different VLANs with same ID value, on -# different interfaces, please note that you need to use both the interface and -# vlan number in the numbering. This applies for all of the options: name, -# txqueuelen, mac, broadcast, mtu, ingress, egress, flags -#vlan1_name="vlan1" -#eth0_vlan2_name="eth0.2" -#eth1_vlan2_name="eth1.2" - -# The following shows the old set_name_type setting and what new option to set: -# Using eth9 & VLAN VID 26 as an example. -# VLAN_PLUS_VID vlan26_name="vlan0026" -# VLAN_PLUS_VID_NO_PAD vlan26_name="vlan26" -# DEV_PLUS_VID eth9_vlan26_name="eth9.0026" -# DEV_PLUS_VID_NO_PAD eth9_vlan26_name="eth9.26" - -# Set the vlan flags -#vlan1_flags="reorder_hdr off gvrp on loose_binding on" -#eth0_vlan1_flags="reorder_hdr off gvrp on loose_binding on" - -# Configure in/egress maps -#vlan1_ingress="2:6 3:5" -#eth0_vlan1_egress="1:2" - -#config_vlan1="172.16.2.1/24" -#config_vlan2="172.16.3.1/24" -#config_eth0_1="172.16.4.1/24" -#config_eth1_1="172.16.5.1/24" - -# NOTE: Vlans can be configured with a . in their interface names -# When configuring vlans with this name type, you need to replace . with a _ -#config_eth0.1="dhcp" - does not work -#config_eth0_1="dhcp" - does work - -# NOTE: Vlans are controlled by their physical interface and not per vlan -# This means you do not need to create init scripts in /etc/init.d for each -# vlan, you must need to create one for the physical interface. -# If you wish to control the configuration of each vlan through a separate -# script then you need to do this. -#vlan_start_eth0="no" - -# If you do the above then you may want to depend on eth0 like so -# rc_net_vlan1_need="net.eth0" -# NOTE: depend functions only work in /etc/conf.d/net -# and not in profile configs such as /etc/conf.d/net.foo - -# Also, you might want to make eth0 not provide net in this case so that -# dependent services will start when the vlan is active instead of the -# physical interface. -# rc_net_eth0_provide="!net" - -# MAC-VLAN support -# The following configuration can be used to create a new interface 'macvlan0' -# linked to 'eth0' -#macvlan_macvlan0="eth0" - -# MAC-VLAN mode (private, vepa, bridge, passtru) -#mode_macvlan0="private" - -# IP address, MAC address, ... are configured as a normal interface -#config_macvlan0="192.168.20.20/24" -#mac_macvlan0="00:50:06:20:20:20" - -#----------------------------------------------------------------------------- -# Bonding -# For link bonding/trunking on 2.4 kernels, or kernels without sysfs -# emerge net-misc/ifenslave - -# To bond interfaces together -#slaves_bond0="eth0 eth1 eth2" -#config_bond0="null" # You may not want to assign an IP the the bond - -# Please note, that you should generally NOT try to change the MAC addresses of -# a bond interface yourself. If you do so, the kernel and your network switches -# may not work quite right. It is permissible to set the MAC addresses of bond -# slaves BEFORE the bond comes up, but not after the bond is up (it will change -# MAC addresses of the slaves on it's own). - -# You can also configure the parameters of the bond here, which must be done -# via sysfs on 2.6 kernels or newer. The description of all the options can be -# found in the kernel: /usr/src/linux-*/Documentation/networking/bonding.txt -# You will probably want the 'mode' option at the least. -# Some possible parameters: mode fail_over_mac arp_validate arp_interval -# arp_ip_target downdelay updelay lacp_rate ad_select xmit_hash_policy -# num_grat_arp num_unsol_na miimon primary primary_reselect use_carrier -# active_slave queue_id all_slaves_active resend_igmp min_links -#mode_bond0="round-robin" -#miimon_bond0="100" -#arp_ip_target_bond0="+26.0.0.0" - -# If any of the slaves require extra configuration - for example wireless or -# ppp devices - we need to depend function on the bonded interfaces -#rc_net_bond0_need="net.eth0 net.eth1" - -# Bonding subsume support (prevents crashes for root-on-NFS) -# - Only tested in the default bonding mode ('active-backup') with -# IPv4 -# - Only subsumes basic interface characteristics (IP, netmask) and -# excludes additional routes, interface properties such as MTU, -# interface-associated netfilter rules, etc. -# In the example below, the (usually kernel-autoconfigured) -# 'eth0' interface is a member of bond0, which subsumes the -# existing interface configuration without upsetting NFS. -#slaves_bond0="eth0 eth1" -#subsume_bond0="eth0" - -#----------------------------------------------------------------------------- -# Classical IP over ATM -# For CLIP support emerge net-dialup/linux-atm - -# Ensure that you have /etc/atmsigd.conf setup correctly -# Now setup each clip interface like so -#clip_atm0="peer_ip [if.]vpi.vci [opts]," -# where "peer_ip" is the IP address of a PVC peer (in case of an ATM connection -# with your ISP, your only peer is usually the ISP gateway closest to you), -# "if" is the number of the ATM interface which will carry the PVC, "vpi.vci" -# is the ATM VC address, and "opts" may optionally specify VC parameters like -# qos, pcr, and the like (see "atmarp -s" for further reference). Please also -# note quoting: it is meant to distinguish the VCs you want to create. You may, -# in example, create an atm0 interface to more peers, like this: -#clip_atm0="1.1.1.254,0.8.35 1.1.1.253,1.8.35" - -# By default, the PVC will use the LLC/SNAP encapsulation. If you rather need a -# null encapsulation (aka "VC mode"), please add the keyword "null" to opts. - - -#----------------------------------------------------------------------------- -# PPP -# For PPP support, emerge net-dialup/ppp -# PPP is used for most dialup connections, including ADSL. -# The older ADSL module is documented below, but you are encouraged to try -# this module first. -# -# You need to create the PPP net script yourself. Make it like so -#ln -s net.lo /etc/init.d/net.ppp0 -# -# Each PPP interface requires an interface to use as a "Link" -#link_ppp0="/dev/ttyS0" # Most PPP links will use a serial port -#link_ppp0="eth0" # PPPoE requires an ethernet interface -#link_ppp0="[itf.]vpi.vci" # PPPoA requires the ATM VC's address -#link_ppp0="/dev/null" # ISDN links should have this -#link_ppp0="pty 'your_link_command'" # PPP links over ssh, rsh, etc -# -# Here you should specify what pppd plugins you want to use -# Available plugins are: pppoe, pppoa, capi, dhcpc, minconn, radius, -# radattr, radrealms and winbind -#plugins_ppp0="pppoe" # Required plugin for PPPoE -#plugins_ppp0="pppoa vc-encaps" # Required plugin for PPPoA with an option -#plugins_ppp0="capi" # Required plugin for ISDN -# -# PPP requires at least a username. You can optionally set a password here too -# If you don't, then it will use the password specified in /etc/ppp/*-secrets -# against the specified username -#username_ppp0='user' -#password_ppp0='password' -# NOTE: You can set a blank password like so -#password_ppp0= -# -# The PPP daemon has many options you can specify - although there are many -# and may seem daunting, it is recommended that you read the pppd man page -# before enabling any of them -#pppd_ppp0=" -# maxfail 0 # WARNING: It's not recommended you use this -# # if you don't specify maxfail then we assume 0 -# updetach # If not set, "/etc/init.d/net.ppp0 start" will return -# # immediately, without waiting the link to come up -# # for the first time. -# # Do not use it for dial-on-demand links! -# debug # Enables syslog debugging -# noauth # Do not require the peer to authenticate itself -# defaultroute # Make this PPP interface the default route -# usepeerdns # Use the DNS settings provided by PPP -# -# On demand options -# demand # Enable dial on demand -# idle 30 # Link goes down after 30 seconds of inactivity -# 10.112.112.112:10.112.112.113 # Phony IP addresses -# ipcp-accept-remote # Accept the peers idea of remote address -# ipcp-accept-local # Accept the peers idea of local address -# holdoff 3 # Wait 3 seconds after link dies before re-starting -# -# Dead peer detection -# lcp-echo-interval 15 # Send a LCP echo every 15 seconds -# lcp-echo-failure 3 # Make peer dead after 3 consecutive -# # echo-requests -# -# Compression options - use these to completely disable compression -# noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp -# -# Dial-up settings -# lock # Lock serial port -# 115200 # Set the serial port baud rate -# modem crtscts # Enable hardware flow control -# 192.168.0.1:192.168.0.2 # Local and remote IP addresses -#" -# -# Dial-up PPP users need to specify at least one telephone number -#phone_number_ppp0="12345689" # Maximum 2 phone numbers are supported -# They will also need a chat script - here's a good one -#chat_ppp0=" -#ABORT BUSY -#ABORT ERROR -#ABORT 'NO ANSWER' -#ABORT 'NO CARRIER' -#ABORT 'NO DIALTONE' -#ABORT 'Invalid Login' -#ABORT 'Login incorrect' -#TIMEOUT 5 -#'' ATZ -#OK AT # Put your modem initialization string here -#OK 'ATDT\T' -#TIMEOUT 60 -#CONNECT '' -#TIMEOUT 5 -#~-- '' -#" - -# If the link require extra configuration - for example wireless or -# RFC 268 bridge - we need to depend on the bridge so they get -# configured correctly. -#rc_net_ppp0_need="net.nas0" - -#WARNING: if MTU of the PPP interface is less than 1500 and you use this -#machine as a router, you should add the following rule to your firewall -# -#iptables -I FORWARD 1 -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu - -#----------------------------------------------------------------------------- -# ADSL -# For ADSL support, emerge net-dialup/rp-pppoe -# WARNING: This ADSL module is being deprecated in favour of the PPP module -# above. -# You should make the following settings and also put your -# username/password information in /etc/ppp/pap-secrets - -# Configure the interface to use ADSL -#config_eth0="adsl" - -# You probably won't need to edit /etc/ppp/pppoe.conf if you set this -#adsl_user_eth0="my-adsl-username" - -#----------------------------------------------------------------------------- -# ISDN -# For ISDN support, emerge net-dialup/isdn4k-utils -# You should make the following settings and also put your -# username/password information in /etc/ppp/pap-secrets - -# Configure the interface to use ISDN -#config_ippp0="dhcp" -# It's important to specify dhcp if you need it! -#config_ippp0="192.168.0.1/24" -# Otherwise, you can use a static IP - -# NOTE: The interface name must be either ippp or isdn followed by a number - -# You may need this option to set the default route -#ipppd_eth0="defaultroute" - -#----------------------------------------------------------------------------- -# MAC changer -# Warning: Do NOT use this on bonding interfaces! Bonding changes MACs itself. -# -# To set a specific MAC address -#mac_eth0="00:11:22:33:44:55" - -# For changing MAC addresses using the below, emerge net-analyzer/macchanger -# - to randomize the last 3 bytes only -#mac_eth0="random-ending" -# - to randomize between the same physical type of connection (e.g. fibre, -# copper, wireless) , all vendors -#mac_eth0="random-samekind" -# - to randomize between any physical type of connection (e.g. fibre, copper, -# wireless) , all vendors -#mac_eth0="random-anykind" -# - full randomization - WARNING: some MAC addresses generated by this may NOT -# act as expected -#mac_eth0="random-full" -# custom - passes all parameters directly to net-analyzer/macchanger -#mac_eth0="some custom set of parameters" - -# You can also set other options based on the MAC address of your network card -# Handy if you use different docking stations with laptops -#config_001122334455="dhcp" - -#----------------------------------------------------------------------------- -# TUN/TAP -# For TUN/TAP support install iproute2, openvpn or usermode-utilities -# -# You must specify if we're a tun or tap device. Then you can give it any -# name you like - such as vpn -#tuntap_vpn="tun" -#config_vpn="192.168.0.1/24" - -# Or stick wit the generic names - like tap0 -#tuntap_tap0="tap" -#config_tap0="192.168.0.1/24" - -# Use something like this to pass custom options to iproute2 during -# tunnel creation. This sets the user and group ownership of the node. -#iproute2_tun1="user foo group bar" -# For passing custom options to tunctl use something like the following. This -# example sets the owner to adm -#tunctl_tun1="-u adm" -# OpenVPN-2.1_rc6 and newer allow --user and --group to set owner and group -# of the node as well -#openvpn_tun1="--user foo --group bar" - -#----------------------------------------------------------------------------- -# Bridging (802.1d) -# For bridging support emerge net-misc/bridge-utils - -# To add ports to bridge br0 -#bridge_br0="eth0 eth1" -# or dynamically add them when the interface comes up -#bridge_add_eth0="br0" -#bridge_add_eth1="br0" - -# NOTE: If you want to manually start an empty bridge, and then dynamically add -# ports to it you must set at least one of the following variables based on the -# interface name, so that we can pick it up from your configuration. Even an -# empty value variable is fine, but at least one of them must be set: -# brctl_IFVAR - -# You need to configure the ports to null values so dhcp does not get started -#config_eth0="null" -#config_eth1="null" - -# Finally give the bridge an address - dhcp or a static IP, this is assigned to -# the bridge when the bridge is explicitly started. -#config_br0="dhcp" # may not work when adding ports dynamically -#config_br0="192.168.0.1/24" - -# If any of the ports require extra configuration - for example wireless or -# ppp devices - we need to depend on them like so. -#rc_net_br0_need="net.eth0 net.eth1" - -# Below is an example of configuring the bridge -# Consult "man brctl" for more details -#brctl_br0="setfd 15 -#sethello 2 -#stp on" - -# You can also configure the bridge or bridge members via sysfs on 2.6 kernels -# or newer. See the kernel bridge documentation for a description of these -# options. -#stp_state_br0="0" -#forward_delay_br0="10" -#hairpin_mode_eth0="1" - -#----------------------------------------------------------------------------- -# RFC 2684 Bridge Support -# For RFC 2684 bridge support emerge net-misc/br2684ctl - -# Interface names have to be of the form nas0, nas1, nas2, etc. -# You have to specify a VPI and VCI for the interface like so -#br2684ctl_nas0="-a 0.38" # UK VPI and VCI - -# You may want to configure the encapsulation method as well by adding the -e -# option to the command above (may need to be before the -a command) -# -e 0 # LLC (default) -# -e 1 # VC mux - -# Then you can configure the interface as normal -#config_nas0="'192.168.0.1/24'" - -#----------------------------------------------------------------------------- -# Tunneling -# WARNING: For tunneling it is highly recommended that you -# emerge sys-apps/iproute2 -# -# For GRE tunnels -#iptunnel_vpn0="mode gre remote 207.170.82.1 key 0xffffffff ttl 255" - -# For IPIP tunnels -#iptunnel_vpn0="mode ipip remote 207.170.82.2 ttl 255" - -# To configure the interface -#config_vpn0="192.168.0.2 pointopoint 192.168.1.2" # ifconfig style -#config_vpn0="192.168.0.2 peer 192.168.1.1" # iproute2 style - -# 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you -# have a non-private address configured on an interface. -# link_6to4="eth0" # Interface to base its addresses on -# config_6to4="ip6to4" -# You may want to depend on eth0 like so -#rc_net_6to4_need="net.eth0" -# To ensure that eth0 is configured before 6to4. Of course, the tunnel could be -# any name and this also works for any configured interface. -# NOTE: If you're not using iproute2 then your 6to4 tunnel has to be called -# sit0 - otherwise use a different name like 6to4 in the example above. - -# You can also specify a relay and suffix if you like. -# The default relay is 192.88.99.1 and the default suffix is :1 -#relay_6to4="192.168.3.2" -#suffix_6to4=":ff" - -#----------------------------------------------------------------------------- -# Advanced Routing -# WARNING: For advanced routing you MUST be using sys-apps/iproute2 -# -# This provides a means to do multi-homing and more using the Routing Policy -# Database (RPDB). -# -# See the following links for background and more information. -# http://linux-ip.net/html/ch-routing.html -# http://linux-ip.net/html/ch-advanced-routing.html - -# The rules listed will be added with 'ip rule add LINE' when the interface is -# being brought up. They will also be removed with 'ip rule delete LINE'. -# The rules added are also stored for later removal, so if you alter your rules -# directly before stopping, you should review your rules again after stopping. - -# Note in earlier versions of openrc, this was provided as an example in -# postup/postdown, however that implementation suffered some bugs in corner -# cases, which are now fixed with this merger. If you used the previous -# example, you should only need to drop the relevent portions of your -# postup/postdown functions, and review the quoting in your rules_IFACE -# variables. - -# Below is a trivial example for a dual-homed connection where there is an OOB -# management network. Only packets explicitly with an address from or to the -# OOB are sent via eth0. All others go via eth1 as the eth1 rules have a lower -# priority. - -# If you want to use names for your tables, you should put lines into -# /etc/iproute2/rt_tables, an example follows: -# 2 oob -# 3 external -# -# IPv6 RPDB entries are to be found in the rules6_IFVAR variables: - -#rules_eth0=" -#from ZZZ.ZZZ.200.128/27 table oob priority 500 -#to ZZZ.ZZZ.200.128/27 table oob priority 550" -#rules_eth1=" -#from XXX.XXX.112.0/24 table external priority 400 -#to XXX.XXX.112.0/24 table external priority 450" -#routes_eth0=" -#ZZZ.ZZZ.200.128/27 dev eth0 table oob scope link -#default via ZZZ.ZZZ.200.129 table oob" -#routes_eth1=" -#XXX.XXX.112.0/24 dev eth1 table external scope link -#default via XXX.XXX.112.1 dev eth1" - -# IPv6 example: -#rules6_eth0=" -#from 2001:0DB8:AAAA:BBBB::/64 table vpn priority 100 -#to 2001:0DB8:AAAA:BBBB::/64 table vpn priority 150" - - -#----------------------------------------------------------------------------- -# System -# For configuring system specifics such as domain, dns, ntp and nis servers -# It's rare that you would need todo this, but you can anyway. -# This is most benefit to wireless users who don't use DHCP so they can change -# their configs based on SSID. - -# If you omit the _eth0 suffix, then it applies to all interfaces unless -# overridden by the interface suffix. -#dns_domain_eth0="your.domain" -#dns_servers_eth0="192.168.0.2 192.168.0.3" -#dns_search_eth0="this.domain that.domain" -#dns_options_eth0="timeout:1 rotate" -#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0" -# See the man page for resolv.conf for details about the options and sortlist -# directives - -#ntp_servers_eth0="192.168.0.2 192.168.0.3" - -#nis_domain_eth0="domain" -#nis_servers_eth0="192.168.0.2 192.168.0.3" - -# NOTE: Setting any of these will stamp on the files in question. So if you -# don't specify dns_servers but you do specify dns_domain then no nameservers -# will be listed in /etc/resolv.conf even if there were any there to start -# with. -# If this is an issue for you then maybe you should look into a resolv.conf -# manager like resolvconf-gentoo to manage this file for you. All packages -# that baselayout supports use resolvconf-gentoo if installed. - -#----------------------------------------------------------------------------- -# Cable in/out detection -# Sometimes the cable is in, others it's out. Obviously you don't want to -# restart net.eth0 every time when you plug it in either. -# -# netplug is a package that detects this and requires no extra configuration -# on your part. -# emerge sys-apps/netplug -# or -# emerge sys-apps/ifplugd -# and you're done :) - -# By default we don't wait for netplug/ifplugd to configure the interface. -# If you would like it to wait so that other services know that network is -# up then you can specify a timeout here. A value of 0 means wait forever, -# and a negative value means never wait. -#plug_timeout_eth0="10" -# If you want to set it for all interfaces: -#plug_timeout="10" - -# If you don't want to use netplug on a specific interface but you have it -# installed, you can disable it for that interface via the modules statement -#modules_eth0="!netplugd" -# You can do the same for ifplugd -# -# You can disable them both with the generic plug -#modules_eth0="!plug" - -# To use specific ifplugd options, fex specifying wireless mode -#ifplugd_eth0="--api-mode=wlan" -# man ifplugd for more options - -#----------------------------------------------------------------------------- -# Interface hardware tuning & configuration via ethtool -# If you need to change explicit hardware settings on your network card prior -# to bringing the interface up, the following is available. -# -# For a full listing of settings, please consulting ethtool(8) and the output -# of "ethtool --help". -# -# Multiple entries (seperated by newlines) are supported in all of the -# variables as some settings cannot be changed at the same time. -# -# Valid variable name fragments: change pause coalesce ring offload -# change_eeprom identify nfc flash rxfh_indir ntuple - -# Set Wake-On-Lan to listen for SecureOn MagicPacket(tm), the message level to -# notify us of WOL changes, and the SecureOn password to 'DE:AD:BE:EF:CA:FE'. -#ethtool_change_eth0="wol gs -#msglvl wol on -#sopass DE:AD:BE:EF:CA:FE" - -# Disable pause auto-negotiation and explicitly enable RX and TX pause. -#ethtool_pause_eth0="autoneg off -#rx on tx on" - -# Enasble adaptive RX and TX coalescing -#ethtool_coalesce_eth0="adaptive-rx on adaptive-tx on" - -# Change ring buffer settings -#ethtool_ring_eth0="" - -# Enable all offload settings -#ethtool_offload_eth0="rx on tx on sg on tso on ufo on gso on gro on lro on" - -# Change specific bytes in the EEPROM -#ethtool_change_eeprom_eth0="" - -# Run the identify sequence on the interface for 1 second (does not return until completion) -#ethtool_identify_eth0="1" - -# Configure receive network flow classification -#ethtool_nfc_eth0=" -#rx-flow-hash tcp4 f -#rx-flow-hash udp4 s" - -# Flash firmware to all regions -#ethtool_flash_eth0="/some/path/firmware1 0" - -# Flash firmware to region 1 -#ethtool_flash_eth0="/some/path/firmware2 1" - -# Set receive flow hash indirection table for even balancing between N receive queues -#ethtool_rxfh_indir_eth0="equal 4" - -# Configure Rx ntuple filters and actions -#ethtool_ntuple_eth0="" - -# Additionally, there is a special control variable, if you need to change the -# order of option processing. The default order is: -# flash change-eeprom change pause coalesce ring offload identify nfc rxfh-indir ntuple - -# Set global order to default -#ethtool_order="flash change-eeprom change pause coalesce ring offload identify nfc rxfh-indir ntuple" - -# Hypothetical network card that requires a change-eeprom toggle to enable flashing -#ethtool_order_eth0="change-eeprom flash change pause coalesce ring offload nfc rxfh-indir ntuple" - -#----------------------------------------------------------------------------- -# Firewalld support -# If you are using the firewalld daemon to configure your firewall -# settings and you have specific zones you want to apply to your -# interfaces, you can do this here. -#firewalld_zone_eth0="myzone" - -############################################################################## -# ADVANCED CONFIGURATION -# -# Four functions can be defined which will be called surrounding the -# start/stop operations. The functions are called with the interface -# name first so that one function can control multiple adapters. An extra two -# functions can be defined when an interface fails to start or stop. -# -# The return values for the preup and predown functions should be 0 -# (success) to indicate that configuration or deconfiguration of the -# interface can continue. If preup returns a non-zero value, then -# interface configuration will be aborted. If predown returns a -# non-zero value, then the interface will not be allowed to continue -# deconfiguration. -# -# The return values for the postup, postdown, failup and faildown functions are -# ignored since there's nothing to do if they indicate failure. -# -# ${IFACE} is set to the interface being brought up/down -# ${IFVAR} is ${IFACE} converted to variable name bash allows -# -# For historical and compatibility reasons, preup is actually normally called -# in the following sequence: up ; preup ; up. -# The first up causes the kernel to initialize the device, so -# that it is available for use in the preup function. However, for some -# hardware, e.g. CAN devices, some configuration is needed before trying to up -# the interface will actually work. For such hardware, the -# up_before_preup variables will allow skipping the first up call if set -# to yes. -#up_before_preup_IFVAR="NO" -#up_before_preup="NO" - -#preup() { -# # Test for link on the interface prior to bringing it up. This -# # only works on some network adapters and requires the -# # sys-apps/net-tools package to be installed. -# if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then -# ewarn "No link on ${IFACE}, aborting configuration" -# return 1 -# fi -# -# # Test for link on the interface prior to bringing it up. This -# # only works on some network adapters and requires the ethtool -# # package to be installed. -# if ethtool "${IFACE}" | grep -q 'Link detected: no'; then -# ewarn "No link on ${IFACE}, aborting configuration" -# return 1 -# fi -# -# # Test to see if we're docked or not and configure like so -# # config_docked="dhcp" -# if grep -q "1" /sys/devices/platform/dock.0/docked; then -# einfo "${IFACE} is docked - configuring" -# _configure_variables "docked" -# fi -# -# # Remember to return 0 on success -# return 0 -#} - -#predown() { -# # The default in the script is to test for NFS root and disallow -# # downing interfaces in that case. Note that if you specify a -# # predown() function you will override that logic. Here it is, in -# # case you still want it... -# if is_net_fs /; then -# eerror "root filesystem is network mounted -- can't stop ${IFACE}" -# return 1 -# fi -# -# # Remember to return 0 on success -# return 0 -#} - -#postup() { -# # This function could be used, for example, to register with a -# # dynamic DNS service. Another possibility would be to -# # send/receive mail once the interface is brought up. -#} - -#postdown() { -# # Enable Wake-On-LAN for every interface except for lo -# # Probably a good idea to set ifdown="no" in /etc/conf.d/net -# # as well ;) -# [ "${IFACE}" != "lo" ] && ethtool -s "${IFACE}" wol g -# # Return 0 always -# return 0 -#} - -#failup() { -# # This function is mostly here for completeness... I haven't -# # thought of anything nifty to do with it yet ;-) -#} - -#faildown() { -# # This function is mostly here for completeness... I haven't -# # thought of anything nifty to do with it yet ;-) -#} - -# You should note that we don't stop the network at system shutdown by default. -# If you really need this, then set keep_network=NO diff --git a/init.d/Makefile b/init.d/Makefile index fc55b3ec..c2c3ea1f 100644 --- a/init.d/Makefile +++ b/init.d/Makefile @@ -1,23 +1,19 @@ +include ../mk/net.mk + DIR= ${INITDIR} SRCS= bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \ netmount.in root.in savecache.in swap.in swapfiles.in \ tmpfiles.setup.in swclock.in sysctl.in urandom.in ${SRCS-${OS}} BIN= ${OBJS} -# Build our old net foo or not -ifeq (${MKNET},) +# Are we installing our network scripts? +ifeq (${MKNET},yes) SRCS+= network.in staticroute.in endif -ifeq (${MKNET},oldnet) -INSTALLAFTER= _installafter_net.lo -SRCS+= net.lo.in -endif - MK= ../mk include ${MK}/os.mk -NET_LO-FreeBSD= net.lo0 # Generic BSD scripts SRCS-FreeBSD= hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \ rpcbind.in savecore.in syslogd.in @@ -25,12 +21,10 @@ SRCS-FreeBSD= hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \ SRCS-FreeBSD+= adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \ mixer.in nscd.in powerd.in syscons.in -NET_LO-Linux= net.lo SRCS-Linux= devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \ killprocs.in modules.in mount-ro.in mtab.in numlock.in \ procfs.in sysfs.in termencoding.in tmpfiles.dev.in -NET_LO-NetBSD= net.lo0 # Generic BSD scripts SRCS-NetBSD= hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \ rpcbind.in savecore.in syslogd.in @@ -43,6 +37,3 @@ SRCS-NetBSD+= devdb.in swap-blk.in ttys.in wscons.in include ${MK}/scripts.mk _installafter_: realinstall - -_installafter_net.lo: realinstall - ${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO-${OS}} diff --git a/init.d/net.lo.in b/init.d/net.lo.in deleted file mode 100644 index cc3bfd03..00000000 --- a/init.d/net.lo.in +++ /dev/null @@ -1,789 +0,0 @@ -#!@SBINDIR@/runscript -# Copyright (c) 2007-2009 Roy Marples -# Released under the 2-clause BSD license. - -MODULESDIR="${RC_LIBEXECDIR}/net" -MODULESLIST="${RC_SVCDIR}/nettree" -_config_vars="config routes" - -[ -z "${IN_BACKGROUND}" ] && IN_BACKGROUND="NO" - -description="Configures network interfaces." - -# Handy var so we don't have to embed new lines everywhere for array splitting -__IFS=" -" -depend() -{ - local IFACE=${RC_SVCNAME#*.} - local IFVAR=$(shell_var "${IFACE}") - - need localmount - if [ "$RC_UNAME" = Linux -a "$IFACE" != lo ]; then - need sysfs - fi - after bootmisc - keyword -jail -prefix -vserver - - case "${IFACE}" in - lo|lo0) ;; - *) - after net.lo net.lo0 dbus - provide net - ;; - esac - - if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then - depend_${IFVAR} - fi - - local dep= prov= - for dep in need use before after provide keyword; do - eval prov=\$rc_${dep}_${IFVAR} - if [ -n "${prov}" ]; then - ${dep} ${prov} - ewarn "rc_${dep}_${IFVAR} is deprecated." - ewarn "Please use rc_net_${IFVAR}_${dep} instead." - fi - done -} - -# Support bash arrays - sigh -_array_helper() -{ - local _a= - - eval _a=\$$1 - _a=$(echo "${_a}" | sed -e 's:^[[:space:]]*::' -e 's:[[:space:]]*$::' -e '/^$/d' -e 's:[[:space:]]\{1,\}: :g') - - [ -n "${_a}" ] && printf "%s\n" "${_a}" -} - -_get_array() -{ - local _a= - if [ -n "${BASH}" ]; then - case "$(declare -p "$1" 2>/dev/null)" in - "declare -a "*) - ewarn "You are using a bash array for $1." - ewarn "This feature will be removed in the future." - ewarn "Please see net.example for the correct format for $1." - eval "set -- \"\${$1[@]}\"" - for _a; do - printf "%s\n" "${_a}" - done - return 0 - ;; - esac - fi - - _array_helper $1 -} - -# Flatten bash arrays to simple strings -_flatten_array() -{ - if [ -n "${BASH}" ]; then - case "$(declare -p "$1" 2>/dev/null)" in - "declare -a "*) - ewarn "You are using a bash array for $1." - ewarn "This feature will be removed in the future." - ewarn "Please see net.example for the correct format for $1." - eval "set -- \"\${$1[@]}\"" - for x; do - printf "'%s' " "$(printf "$x" | sed "s:':'\\\'':g")" - done - return 0 - ;; - esac - fi - - _array_helper $1 -} - -_wait_for_carrier() -{ - local timeout= efunc=einfon - - _has_carrier && return 0 - - eval timeout=\$carrier_timeout_${IFVAR} - timeout=${timeout:-${carrier_timeout:-0}} - - # Incase users don't want this nice feature ... - [ ${timeout} -le 0 ] && return 0 - - yesno ${RC_PARALLEL} && efunc=einfo - ${efunc} "Waiting for carrier (${timeout} seconds) " - while [ ${timeout} -gt 0 ]; do - if _has_carrier; then - [ "${efunc}" = "einfon" ] && echo - eend 0 - return 0 - fi - sleep 1 - : $(( timeout -= 1 )) - [ "${efunc}" = "einfon" ] && printf "." - done - - [ "${efunc}" = "einfon" ] && echo - eend 1 - return 1 -} - -_netmask2cidr() -{ - # Some shells cannot handle hex arithmetic, so we massage it slightly - # Buggy shells include FreeBSD sh, dash and busybox. - # bash and NetBSD sh don't need this. - case $1 in - 0x*) - local hex=${1#0x*} quad= - while [ -n "${hex}" ]; do - local lastbut2=${hex#??*} - quad=${quad}${quad:+.}0x${hex%${lastbut2}*} - hex=${lastbut2} - done - set -- ${quad} - ;; - esac - - local i= len= - local IFS=. - for i in $1; do - case $i in - 0x*) i=$((i)) ;; - esac - while [ ${i} -ne 0 ]; do - : $(( len += i % 2 )) - : $(( i >>= 1 )) - done - done - - echo "${len}" -} - -_configure_variables() -{ - local var= v= t= - - for var in ${_config_vars}; do - local v= - for t; do - eval v=\$${var}_${t} - if [ -n "${v}" ]; then - eval ${var}_${IFVAR}=\$${var}_${t} - continue 2 - fi - done - done -} - -_which() -{ - local i OIFS - # Empty - [ -z "$1" ] && return - # check paths - OIFS="$IFS" - IFS=: - for i in $PATH ; do - [ -x $i/$1 ] && echo $i/$1 && break - done - IFS=$OIFS -} - -# Like _which, but also consider shell builtins, and multiple alternatives -_program_available() -{ - [ -z "$1" ] && return 0 - local x= - for x; do - case "${x}" in - /*) [ -x "${x}" ] && break;; - *) type "${x}" >/dev/null 2>&1 && break;; - esac - unset x - done - [ -n "${x}" ] && echo $x && return 0 - return 1 -} - -_show_address() -{ - einfo "received address $(_get_inet_address "${IFACE}")" -} - -# Basically sorts our modules into order and saves the list -_gen_module_list() -{ - local x= f= force=$1 - if ! ${force} && [ -s "${MODULESLIST}" -a "${MODULESLIST}" -nt "${MODULESDIR}" ]; then - local update=false - for x in "${MODULESDIR}"/*.sh; do - [ -e "${x}" ] || continue - if [ "${x}" -nt "${MODULESLIST}" ]; then - update=true - break - fi - done - ${update} || return 0 - fi - - einfo "Caching network module dependencies" - # Run in a subshell to protect the main script - ( - after() { - eval ${MODULE}_after="\"\${${MODULE}_after}\${${MODULE}_after:+ }$*\"" - } - - before() { - local mod=${MODULE} - local MODULE= - for MODULE; do - after "${mod}" - done - } - - program() { - if [ "$1" = "start" -o "$1" = "stop" ]; then - local s="$1" - shift - eval ${MODULE}_program_${s}="\"\${${MODULE}_program_${s}}\${${MODULE}_program_${s}:+ }$*\"" - else - eval ${MODULE}_program="\"\${${MODULE}_program}\${${MODULE}_program:+ }$*\"" - fi - } - - provide() { - eval ${MODULE}_provide="\"\${${MODULE}_provide}\${${MODULE}_provide:+ }$*\"" - local x - for x in $*; do - eval ${x}_providedby="\"\${${MODULE}_providedby}\${${MODULE}_providedby:+ }${MODULE}\"" - done - } - - for MODULE in "${MODULESDIR}"/*.sh; do - sh -n "${MODULE}" || continue - . "${MODULE}" || continue - MODULE=${MODULE#${MODULESDIR}/} - MODULE=${MODULE%.sh} - eval ${MODULE}_depend - MODULES="${MODULES} ${MODULE}" - done - - VISITED= - SORTED= - visit() { - case " ${VISITED} " in - *" $1 "*) return;; - esac - VISITED="${VISITED} $1" - - eval AFTER=\$${1}_after - for MODULE in ${AFTER}; do - eval PROVIDEDBY=\$${MODULE}_providedby - if [ -n "${PROVIDEDBY}" ]; then - for MODULE in ${PROVIDEDBY}; do - visit "${MODULE}" - done - else - visit "${MODULE}" - fi - done - - eval PROVIDE=\$${1}_provide - for MODULE in ${PROVIDE}; do - visit "${MODULE}" - done - - eval PROVIDEDBY=\$${1}_providedby - [ -z "${PROVIDEDBY}" ] && SORTED="${SORTED} $1" - } - - for MODULE in ${MODULES}; do - visit "${MODULE}" - done - - printf "" > "${MODULESLIST}" - i=0 - for MODULE in ${SORTED}; do - eval PROGRAM=\$${MODULE}_program - eval PROGRAM_START=\$${MODULE}_program_start - eval PROGRAM_STOP=\$${MODULE}_program_stop - eval PROVIDE=\$${MODULE}_provide - echo "module_${i}='${MODULE}'" >> "${MODULESLIST}" - echo "module_${i}_program='${PROGRAM}'" >> "${MODULESLIST}" - echo "module_${i}_program_start='${PROGRAM_START}'" >> "${MODULESLIST}" - echo "module_${i}_program_stop='${PROGRAM_STOP}'" >> "${MODULESLIST}" - echo "module_${i}_provide='${PROVIDE}'" >> "${MODULESLIST}" - : $(( i += 1 )) - done - echo "module_${i}=" >> "${MODULESLIST}" - ) - - return 0 -} - -_load_modules() -{ - local starting=$1 mymods= - - # Ensure our list is up to date - _gen_module_list false - if ! . "${MODULESLIST}"; then - _gen_module_list true - . "${MODULESLIST}" - fi - - MODULES= - if [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then - eval mymods=\$modules_${IFVAR} - [ -z "${mymods}" ] && mymods=${modules} - fi - - local i=-1 x= mod= f= provides= - while true; do - : $(( i += 1 )) - eval mod=\$module_${i} - [ -z "${mod}" ] && break - [ -e "${MODULESDIR}/${mod}.sh" ] || continue - - eval set -- \$module_${i}_program - if [ -n "$1" ]; then - if ! _program_available "$@" >/dev/null; then - vewarn "Skipping module $mod due to missing program: $@" - continue - fi - fi - if ${starting}; then - eval set -- \$module_${i}_program_start - else - eval set -- \$module_${i}_program_stop - fi - if [ -n "$1" ]; then - if ! _program_available "$@" >/dev/null; then - vewarn "Skipping module $mod due to missing program: $@" - continue - fi - fi - - eval provides=\$module_${i}_provide - if ${starting}; then - case " ${mymods} " in - *" !${mod} "*) continue;; - *" !${provides} "*) [ -n "${provides}" ] && continue;; - esac - fi - MODULES="${MODULES}${MODULES:+ }${mod}" - - # Now load and wrap our functions - if ! . "${MODULESDIR}/${mod}.sh"; then - eend 1 "${RC_SVCNAME}: error loading module \`${mod}'" - exit 1 - fi - - [ -z "${provides}" ] && continue - - # Wrap our provides - local f= - for f in pre_start start post_start; do - eval "${provides}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }" - done - - eval module_${mod}_provides="${provides}" - eval module_${provides}_providedby="${mod}" - done - - # Wrap our preferred modules - for mod in ${mymods}; do - case " ${MODULES} " in - *" ${mod} "*) - eval x=\$module_${mod}_provides - [ -z "${x}" ] && continue - for f in pre_start start post_start; do - eval "${x}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }" - done - eval module_${x}_providedby="${mod}" - ;; - esac - done - - # Finally remove any duplicated provides from our list if we're starting - # Otherwise reverse the list - local LIST="${MODULES}" p= - MODULES= - if ${starting}; then - for mod in ${LIST}; do - eval x=\$module_${mod}_provides - if [ -n "${x}" ]; then - eval p=\$module_${x}_providedby - [ "${mod}" != "${p}" ] && continue - fi - MODULES="${MODULES}${MODULES:+ }${mod}" - done - else - for mod in ${LIST}; do - MODULES="${mod}${MODULES:+ }${MODULES}" - done - fi - - veinfo "Loaded modules: ${MODULES}" -} - -_load_config() -{ - local config="$(_get_array "config_${IFVAR}")" - local fallback="$(_get_array fallback_${IFVAR})" - - config_index=0 - local IFS="$__IFS" - set -- ${config} - - # We should support a space separated array for cidr configs - # But only as long as they do not contain other parameters for the address - if [ $# = 1 ]; then - unset IFS - set -- ${config} - # Of course, we may have a single address added old style. - # If the NEXT argument is a v4 or v6 address, it's the next config. - # Otherwise, it's arguments to the first config... - if [ "${2#*.*}" = "${2}" -a "${2#*:*}" = "${2}" ]; then - # Not an IPv4/IPv6 - local IFS="$__IFS" - set -- ${config} - fi - fi - - # Ensure that loopback has the correct address - if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then - if [ "$1" != "null" ]; then - config_0="127.0.0.1/8" - config_index=1 - fi - else - if [ -z "$1" ]; then - ewarn "No configuration specified; defaulting to DHCP" - config_0="dhcp" - config_index=1 - fi - fi - - - # We store our config in an array like vars - # so modules can influence it - for cmd; do - eval config_${config_index}="'${cmd}'" - : $(( config_index += 1 )) - done - # Terminate the list - eval config_${config_index}= - - config_index=0 - for cmd in ${fallback}; do - eval fallback_${config_index}="'${cmd}'" - : $(( config_index += 1 )) - done - # Terminate the list - eval fallback_${config_index}= - - # Don't set to zero, so any net modules don't have to do anything extra - config_index=-1 -} - -# Support functions -_run_if() -{ - local cmd=$1 iface=$2 ifr=${IFACE} ifv=${IFVAR} - # Ensure that we don't stamp on real values - local IFACE= IFVAR= - shift - if [ -n "${iface}" ]; then - IFACE="${iface}" - [ "${iface}" != "${ifr}" ] && IFVAR=$(shell_var "${IFACE}") - else - IFACE=${ifr} - IFVAR=${ifv} - fi - ${cmd} -} -interface_exists() -{ - _run_if _exists "$@" -} -interface_up() -{ - _run_if _up "$@" -} -interface_down() -{ - _run_if _down "$@" -} - -start() -{ - local IFACE=${RC_SVCNAME#*.} oneworked=false fallback=false module= - local IFVAR=$(shell_var "${IFACE}") cmd= our_metric= - local metric=0 _up_before_preup - eval _up_before_preup="\$up_before_preup_${IFVAR}" - [ -z "${_up_before_preup}" ] && _up_before_preup=$up_before_preup - - einfo "Bringing up interface ${IFACE}" - eindent - - if [ -z "${MODULES}" ]; then - local MODULES= - _load_modules true - fi - - # We up the iface twice if we have a preup to ensure it's up if - # available in preup and afterwards incase the user inadvertently - # brings it down - if [ "$(command -v preup)" = "preup" ]; then - yesno "${_up_before_preup:-yes}" && _up 2>/dev/null - ebegin "Running preup" - eindent - preup || return 1 - eoutdent - fi - - _up 2>/dev/null - - for module in ${MODULES}; do - if [ "$(command -v "${module}_pre_start")" = "${module}_pre_start" ]; then - ${module}_pre_start || exit $? - fi - done - - if ! _exists; then - eerror "ERROR: interface ${IFACE} does not exist" - eerror "Ensure that you have loaded the correct kernel module for your hardware" - return 1 - fi - - if ! _wait_for_carrier; then - if service_started devd; then - ewarn "no carrier, but devd will start us when we have one" - mark_service_inactive "${RC_SVCNAME}" - else - eerror "no carrier" - fi - return 1 - fi - - local config= config_index= - _load_config - config_index=0 - - eval our_metric=\$metric_${IFVAR} - if [ -n "${our_metric}" ]; then - metric=${our_metric} - elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then - : $(( metric += $(_ifindex) )) - fi - - while true; do - eval config=\$config_${config_index} - [ -z "${config}" ] && break - - set -- ${config} - if [ "$1" != "null" -a "$1" != "noop" ]; then - ebegin "$1" - fi - eindent - case "$1" in - noop) - if [ -n "$(_get_inet_address)" ]; then - oneworked=true - break - fi - ;; - null) :;; - [0-9]*|*:*) _add_address ${config};; - *) - if [ "$(command -v "${config}_start")" = "${config}_start" ]; then - "${config}"_start - else - eerror "nothing provides \`${config}'" - fi - ;; - esac - if eend $?; then - oneworked=true - else - eval config=\$fallback_${config_index} - if [ -n "${config}" ]; then - fallback=true - eoutdent - ewarn "Trying fallback configuration ${config}" - eindent - eval config_${config_index}=\$config - unset fallback_${config_index} - : $(( config_index -= 1 )) - fi - fi - eoutdent - : $(( config_index += 1 )) - done - - if ! ${oneworked}; then - if [ "$(command -v failup)" = "failup" ]; then - ebegin "Running failup" - eindent - failup - eoutdent - fi - return 1 - fi - - local hideFirstroute=false first=true routes= - if ${fallback}; then - routes="$(_get_array "fallback_routes_${IFVAR}")" - fi - if [ -z "${routes}" ]; then - routes="$(_get_array "routes_${IFVAR}")" - fi - if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then - if [ "${config_0}" != "null" ]; then - routes="127.0.0.0/8 via 127.0.0.1 -${routes}" - hideFirstroute=true - fi - fi - - local OIFS="${IFS}" SIFS="${IFS-y}" - local IFS="$__IFS" - local fam - for cmd in ${routes}; do - unset IFS - if ${first}; then - first=false - einfo "Adding routes" - fi - - case ${cmd} in - -6" "*) fam="-6"; cmd=${cmd#-6 };; - -4" "*) fam="-4"; cmd=${cmd#-4 };; - esac - - eindent - ebegin ${cmd} - # Work out if we're a host or a net if not told - case ${cmd} in - -net" "*|-host" "*);; - *" "netmask" "*) cmd="-net ${cmd}";; - *.*.*.*/32*) cmd="-host ${cmd}";; - *.*.*.*/*|0.0.0.0|0.0.0.0" "*) cmd="-net ${cmd}";; - default|default" "*) cmd="-net ${cmd}";; - *:*/128*) cmd="-host ${cmd}";; - *:*/*) cmd="-net ${cmd}";; - *) cmd="-host ${cmd}";; - esac - if ${hideFirstroute}; then - _add_route ${fam} ${cmd} >/dev/null 2>&1 - hideFirstroute=false - else - _add_route ${fam} ${cmd} >/dev/null - fi - eend $? - eoutdent - done - if [ "${SIFS}" = "y" ]; then - unset IFS - else - IFS="${OIFS}" - fi - - for module in ${MODULES}; do - if [ "$(command -v "${module}_post_start")" = "${module}_post_start" ]; then - ${module}_post_start || exit $? - fi - done - - if [ "$(command -v postup)" = "postup" ]; then - ebegin "Running postup" - eindent - postup - eoutdent - fi - - return 0 -} - -stop() -{ - # Don't stop the network at shutdown. - # We don't use the noshutdown keyword so that we are started again - # correctly if we go back to multiuser. - yesno ${keep_network:-YES} && yesno $RC_GOINGDOWN && return 0 - - local IFACE=${RC_SVCNAME#*.} module= - local IFVAR=$(shell_var "${IFACE}") opts= - - einfo "Bringing down interface ${IFACE}" - eindent - - if [ -z "${MODULES}" ]; then - local MODULES= - _load_modules false - fi - - if [ "$(command -v predown)" = "predown" ]; then - ebegin "Running predown" - eindent - predown || return 1 - eoutdent - else - if is_net_fs /; then - eerror "root filesystem is network mounted -- can't stop ${IFACE}" - return 1 - fi - fi - - for module in ${MODULES}; do - if [ "$(command -v "${module}_pre_stop")" = "${module}_pre_stop" ]; then - ${module}_pre_stop || exit $? - fi - done - - for module in ${MODULES}; do - if [ "$(command -v "${module}_stop")" = "${module}_stop" ]; then - ${module}_stop - fi - done - - # Only delete addresses for interfaces that exist - if _exists; then - # PPP can manage it's own addresses when IN_BACKGROUND - # Important in case "demand" set on the ppp link - if ! (yesno ${IN_BACKGROUND} && is_ppp) ; then - _delete_addresses "${IFACE}" - fi - fi - - for module in ${MODULES}; do - if [ "$(command -v "${module}_post_stop")" = "${module}_post_stop" ]; then - ${module}_post_stop - fi - done - - # If not in background, and not loopback then bring the interface down - # unless overridden. - if ! yesno ${IN_BACKGROUND} && \ - [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then - eval module=\$ifdown_${IFVAR} - module=${module:-${ifdown:-YES}} - yesno ${module} && _down 2>/dev/null - fi - - type resolvconf >/dev/null 2>&1 && resolvconf -d "${IFACE}" 2>/dev/null - - if [ "$(command -v "postdown")" = "postdown" ]; then - ebegin "Running postdown" - eindent - postdown - eoutdent - fi - - return 0 -} diff --git a/mk/net.mk b/mk/net.mk new file mode 100644 index 00000000..abc198c6 --- /dev/null +++ b/mk/net.mk @@ -0,0 +1 @@ +MKNET?= yes diff --git a/net/.gitignore b/net/.gitignore deleted file mode 100644 index 57c5832e..00000000 --- a/net/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -ifconfig.sh -iwconfig.sh diff --git a/net/Makefile b/net/Makefile deleted file mode 100644 index cc24a802..00000000 --- a/net/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -DIR= ${LIBEXECDIR}/net -SRCS= ifconfig.sh.in ${SRCS-${OS}} -INC= dhclient.sh dhcpcd.sh ifconfig.sh macchanger.sh macnet.sh \ - ssidnet.sh system.sh wpa_supplicant.sh ${INC-${OS}} - -MK= ../mk -include ${MK}/os.mk - -SRCS-FreeBSD= iwconfig.sh.in -INC-FreeBSD= iwconfig.sh - -SRCS-Linux= iwconfig.sh.in -INC-Linux= adsl.sh apipa.sh arping.sh bonding.sh br2684ctl.sh bridge.sh \ - ccwgroup.sh clip.sh ethtool.sh iproute2.sh ifplugd.sh ip6to4.sh \ - ipppd.sh iwconfig.sh netplugd.sh pppd.sh pump.sh tuntap.sh udhcpc.sh \ - vlan.sh macvlan.sh ip6rd.sh firewalld.sh - -SRCS-NetBSD= -INC-NetBSD= ifwatchd.sh - -%.sh: %.sh${SFX} - ${CP} $< $@ - -include ${MK}/scripts.mk diff --git a/net/adsl.sh b/net/adsl.sh deleted file mode 100644 index 744ebc25..00000000 --- a/net/adsl.sh +++ /dev/null @@ -1,74 +0,0 @@ -# Copyright (c) 2004-2007 Gentoo Foundation -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -adsl_depend() -{ - program /usr/sbin/adsl-start /usr/sbin/pppoe-start - before dhcp -} - -adsl_setup_vars() -{ - local startstop="$1" cfgexe= - - if [ -x /usr/sbin/pppoe-start ]; then - exe="/usr/sbin/pppoe-${startstop}" - cfgexe=pppoe-setup - else - exe="/usr/sbin/adsl-${startstop}" - cfgexe=adsl-setup - fi - - # Decide which configuration to use. Hopefully there is an - # interface-specific one - cfgfile="/etc/ppp/pppoe-${IFACE}.conf" - [ -f "${cfgfile}" ] || cfgfile="/etc/ppp/pppoe.conf" - - if [ ! -f "${cfgfile}" ]; then - eerror "no pppoe.conf file found!" - eerror "Please run ${cfgexe} to create one" - return 1 - fi - - return 0 -} - -adsl_start() -{ - local exe= cfgfile= user= - - adsl_setup_vars start || return 1 - - # Might or might not be set in conf.d/net - eval user=\$adsl_user_${IFVAR} - - # Start ADSL with the cfgfile, but override ETH and PIDFILE - einfo "Starting ADSL for ${IFACE}" - ( - cat "${cfgfile}"; - echo "ETH=${IFACE}"; - echo "PIDFILE=/var/run/rp-pppoe-${IFACE}.pid"; - [ -n "${user}" ] && echo "USER=${user}"; - ) | ${exe} >/dev/null - eend $? -} - -adsl_stop() -{ - local exe= cfgfile= - - [ ! -f /var/run/rp-pppoe-"${IFACE}".pid ] && return 0 - - adsl_setup_vars stop || return 1 - - einfo "Stopping ADSL for ${IFACE}" - ( - cat "${cfgfile}"; - echo "ETH=${IFACE}"; - echo "PIDFILE=/var/run/rp-pppoe-${IFACE}.pid"; - ) | ${exe} >/dev/null - eend $? - - return 0 -} diff --git a/net/apipa.sh b/net/apipa.sh deleted file mode 100644 index a4aee8a4..00000000 --- a/net/apipa.sh +++ /dev/null @@ -1,48 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -apipa_depend() -{ - program /sbin/arping -} - -_random() -{ - local r=${RANDOM} # checkbashisms: false positive, we handle it AFTERWARDS - if [ -n "${r}" ]; then - echo "${r}" - else - uuidgen | sed -n -e 's/[^[:digit:]]//g' -e 's/\(^.\{1,7\}\).*/\1/p' - fi -} - -apipa_start() -{ - local iface="$1" i1= i2= addr= i=0 - - _exists true || return 1 - - einfo "Searching for free addresses in 169.254.0.0/16" - eindent - - while [ ${i} -lt 64516 ]; do - : $(( i1 = (_random % 255) + 1 )) - : $(( i2 = (_random % 255) + 1 )) - - addr="169.254.${i1}.${i2}" - vebegin "${addr}/16" - if ! arping_address "${addr}"; then - eval config_${config_index}="\"${addr}/16 broadcast 169.254.255.255\"" - : $(( config_index -= 1 )) - veend 0 - eoutdent - return 0 - fi - - : $(( i += 1 )) - done - - eerror "No free address found!" - eoutdent - return 1 -} diff --git a/net/arping.sh b/net/arping.sh deleted file mode 100644 index 83360d78..00000000 --- a/net/arping.sh +++ /dev/null @@ -1,131 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -arping_depend() -{ - program /sbin/arping /usr/sbin/arping2 - before interface -} - -arping_address() -{ - local ip=${1%%/*} mac="$2" spoof="$3" foundmac= i= w= opts= - - # We only handle IPv4 addresses - case "${ip}" in - 0.0.0.0|0) return 1;; - *.*.*.*);; - *) return 1;; - esac - - # We need to bring the interface up to test - _exists "${iface}" || return 1 - _up "${iface}" - - eval w=\$arping_wait_${IFVAR} - [ -z "${w}" ] && w=${arping_wait:-5} - - if type arping2 >/dev/null 2>&1; then - if [ -n "${spoof}" ]; then - opts="${opts} -S ${spoof}" - else - [ -z "$(_get_inet_address)" ] && opts="${opts} -0" - fi - while [ ${w} -gt 0 -a -z "${foundmac}" ]; do - foundmac="$(arping2 ${opts} -r -c 1 -i "${IFACE}" "${ip}" 2>/dev/null | \ - sed -e 'y/abcdef/ABCDEF/')" - : $(( w -= 1 )) - done - else - [ -z "$(_get_inet_address)" ] && opts="${opts} -D" - - foundmac="$(arping -w "${w}" ${opts} -f -I "${IFACE}" "${ip}" 2>/dev/null | \ - sed -n -e 'y/abcdef/ABCDEF/' -e 's/[^[]*\[\([^]]*\)\].*/\1/p')" - fi - [ -z "${foundmac}" ] && return 1 - - if [ -n "${mac}" ]; then - if [ "${mac}" != "${foundmac}" ]; then - vewarn "Found ${ip} but MAC ${foundmac} does not match" - return 1 - fi - fi - - return 0 -} - -_arping_in_config() -{ - _get_array "config_${IFVAR}" | while read i; do - [ "${i}" = "arping" ] && return 1 - done - return 1 -} - -arping_start() -{ - local gateways= x= conf= i= - einfo "Pinging gateways on ${IFACE} for configuration" - - eval gateways=\$gateways_${IFVAR} - if [ -z "${gateways}" ]; then - eerror "No gateways have been defined (gateways_${IFVAR}=\"...\")" - return 1 - fi - - eindent - - for x in ${gateways}; do - local IFS=, - set -- ${x} - local ip=$1 mac=$2 spoof=$3 extra= - unset IFS - - if [ -n "${mac}" ]; then - mac="$(echo "${mac}" | tr '[:lower:]' '[:upper:]')" - extra="(MAC ${mac})" - fi - - vebegin "${ip} ${extra}" - if arping_address "${ip}" "${mac}" "${spoof}"; then - local IFS=. - for i in ${ip}; do - if [ "${#i}" = "2" ]; then - conf="${conf}0${i}" - elif [ "${#i}" = "1" ]; then - conf="${conf}00${i}" - else - conf="${conf}${i}" - fi - done - unset IFS - [ -n "${mac}" ] && conf="${conf}_$(echo "${mac}" | sed -e 's/://g')" - - eend 0 - eoutdent - veinfo "Configuring ${IFACE} for ${ip} ${extra}" - _configure_variables ${conf} - - # Call the system module as we've aleady passed it by .... - # And it *has* to be pre_start for other things to work correctly - system_pre_start - - # Ensure that we have a valid config - ie arping is no longer there - local IFS="$__IFS" - for i in $(_get_array "config_${IFVAR}"); do - if [ "${i}" = "arping" ]; then - eend 1 "No config found for ${ip} (config_${conf}=\"...\")" - continue 2 - fi - done - unset IFS - - _load_config - return 0 - fi - veend 1 - done - - eoutdent - return 1 -} diff --git a/net/bonding.sh b/net/bonding.sh deleted file mode 100644 index fb008256..00000000 --- a/net/bonding.sh +++ /dev/null @@ -1,223 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -bonding_depend() -{ - before interface macchanger - program /sbin/ifconfig /bin/ifconfig - # If you do not have sysfs, you MUST have this binary instead for ioctl - # Also you will loose some functionality that cannot be done via sysfs: - if [ ! -d /sys/class/net ]; then - program /sbin/ifenslave - fi -} - -_config_vars="$_config_vars slaves" - -_is_bond() -{ - [ -f "/proc/net/bonding/${IFACE}" ] -} - -bonding_pre_start() -{ - local x= s= n= slaves= primary= - - slaves="$(_get_array "slaves_${IFVAR}")" - unset slaves_${IFVAR} - - eval primary="\$primary_${IFVAR}" - unset primary_${IFVAR} - - eval subsume="\$subsume_${IFVAR}" - unset subsume_${IFVAR} - - - [ -z "${slaves}" ] && return 0 - - # Load the kernel module if required - if [ ! -d /proc/net/bonding ]; then - if ! modprobe bonding; then - eerror "Cannot load the bonding module" - return 1 - fi - fi - - if [ ! -d /sys/class/net ]; then - ewarn "sysfs is not available! You will be unable to create new bonds, or change dynamic parameters!" - fi - - # We can create the interface name we like now, but this - # requires sysfs - if ! _exists && [ -d /sys/class/net ]; then - echo "+${IFACE}" > /sys/class/net/bonding_masters - fi - _exists true || return 1 - - if ! _is_bond; then - eerror "${IFACE} is not capable of bonding" - return 1 - fi - - # Interface must be down in order to configure - _down - - # Configure the bond mode & link monitoring, then we can reloop to ensure - # we configure all other options - # mode needs to be done before all other options. - # miimon needs to be done BEFORE downdelay - [ -d /sys/class/net ] && for n in mode miimon; do - x=/sys/class/net/"${IFACE}"/bonding/$n - [ -f "${x}" ] || continue - eval s=\$${n}_${IFVAR} - if [ -n "${s}" ]; then - einfo "Setting ${n}: ${s}" - echo "${s}" >"${x}" || \ - eerror "Failed to configure $n (${n}_${IFVAR})" - fi - done - # Nice and dynamic for remaining options:) - [ -d /sys/class/net ] && for x in /sys/class/net/"${IFACE}"/bonding/*; do - [ -f "${x}" ] || continue - n=${x##*/} - eval s=\$${n}_${IFVAR} - # skip mode and miimon - [ "${n}" == "mode" -o "${n}" == "miimon" ] && continue - if [ -n "${s}" ]; then - einfo "Setting ${n}: ${s}" - echo "${s}" >"${x}" || \ - eerror "Failed to configure $n (${n}_${IFVAR})" - fi - done - - ebegin "Adding slaves to ${IFACE}" - eindent - einfo "${slaves}" - - # Check that our slaves exist - ( - for IFACE in ${slaves}; do - _exists true || return 1 - done - - # Unless we are subsuming an existing interface (NFS root), we down - # slave interfaces to work around bugs supposedly in some chipsets - # that cause failure to enslave from other states. - if [ -z "${subsume}" ]; then - for IFACE in ${slaves}; do - _delete_addresses - _down - done - fi - ) - - # Now force the master to up - # - First test for interface subsume request (required for NFS root) - if [ -n "${subsume}" ]; then - einfo "Subsuming ${subsume} interface characteristics." - eindent - local oiface=${IFACE} - IFACE=${subsume} - local addr="$(_get_inet_address)" - einfo "address: ${addr}" - IFACE=${oiface} - unset oiface - eoutdent - # subsume (presumably kernel auto-)configured IP - ifconfig ${IFACE} ${addr} up - else - # warn if root on nfs and no subsume interface supplied - local root_fs_type=$(mountinfo -s /) - if [ "${root_fs_type}" = "nfs" ]; then - warn_nfs=1 - ewarn "NFS root detected!!!" - ewarn " If your system crashes here, /etc/conf.d/net needs" - ewarn " subsume_${IFACE}=\"\" ... where is the" - ewarn " existing, (usually kernel auto-)configured interface." - fi - # up the interface - _up - fi - - # finally add in slaves - # things needed in the process, and if they are done by ifenslave, openrc, and/or the kernel. - # down new slave interface: ifenslave, openrc - # set mtu: ifenslave, kernel - # set slave MAC: ifenslave, kernel - eoutdent - if [ -d /sys/class/net ]; then - sys_bonding_path=/sys/class/net/"${IFACE}"/bonding - local oiface - oiface=$IFACE - if [ -n "${primary}" ]; then - IFACE=$primary - _down - IFACE=$oiface - echo "+${primary}" >$sys_bonding_path/slaves - echo "${primary}" >$sys_bonding_path/primary - fi - for s in ${slaves}; do - [ "${s}" = "${primary}" ] && continue - if ! grep -q ${s} $sys_bonding_path/slaves; then - IFACE=$s - _down - IFACE=$oiface - echo "+${s}" >$sys_bonding_path/slaves - fi - done - else - ifenslave "${IFACE}" ${slaves} >/dev/null - fi - eend $? - - return 0 #important -} - -bonding_stop() -{ - _is_bond || return 0 - - # Wipe subsumed interface - if [ -n "${subsume}" ]; then - ifconfig ${subsume} 0.0.0.0 - fi - - local slaves= s= - slaves=$( \ - sed -n -e 's/^Slave Interface: //p' "/proc/net/bonding/${IFACE}" \ - | tr '\n' ' ' \ - ) - [ -z "${slaves}" ] && return 0 - - # remove all slaves - ebegin "Removing slaves from ${IFACE}" - eindent - einfo "${slaves}" - eoutdent - if [ -d /sys/class/net ]; then - for s in ${slaves}; do - echo -"${s}" > /sys/class/net/"${IFACE}"/bonding/slaves - done - else - ifenslave -d "${IFACE}" ${slaves} - fi - - # reset all slaves - ( - for IFACE in ${slaves}; do - if _exists; then - _delete_addresses - _down - fi - done - ) - - _down - - if [ -d /sys/class/net ]; then - echo "-${IFACE}" > /sys/class/net/bonding_masters - fi - - eend 0 - return 0 -} diff --git a/net/br2684ctl.sh b/net/br2684ctl.sh deleted file mode 100644 index b3f61196..00000000 --- a/net/br2684ctl.sh +++ /dev/null @@ -1,50 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -br2684ctl_depend() -{ - before ppp - program start br2684ctl -} - -_config_vars="$_config_vars bridge bridge_add brctl" - -br2684ctl_pre_start() -{ - local opts= - eval opts=\$br2684ctl_${IFVAR} - [ -z "${opts}" ] && return 0 - - if [ "${IFACE#nas[0-9]*}" = "${IFACE}" ]; then - eerror "Interface must be called nas[0-9] for RFC 2684 Bridging" - return 1 - fi - - case " ${opts} " in - *" -b "*|*" -c "*) - eerror "The -b and -c options are not allowed for br2684ctl_${IVAR}" - return 1 - ;; - *" -a "*);; - *) - eerror "-a option (VPI and VCI) is required in br2684ctl_${IFVAR}" - return 1 - ;; - esac - - einfo "Starting RFC 2684 Bridge control on ${IFACE}" - start-stop-daemon --start --exec $(_which br2684ctl) --background \ - --make-pidfile --pidfile "/var/run/br2684ctl-${IFACE}.pid" \ - -- -c "${IFACE#nas*}" ${opts} - eend $? -} - -br2684ctl_post_stop() -{ - local pidfile="/var/run/br2684ctl-${IFACE}.pid" - [ -e "${pidfile}" ] || return 0 - - einfo "Stopping RFC 2684 Bridge control on ${IFACE}" - start-stop-daemon --stop --quiet --pidfile "${pidfile}" - eend $? -} diff --git a/net/bridge.sh b/net/bridge.sh deleted file mode 100644 index 60d3eebc..00000000 --- a/net/bridge.sh +++ /dev/null @@ -1,190 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -bridge_depend() -{ - before interface macnet - program brctl -} - -_config_vars="$_config_vars bridge bridge_add brctl" - -_is_bridge() -{ - [ -d /sys/class/net/"${1:-${IFACE}}"/bridge ] - return $? -} - -_is_bridge_port() -{ - [ -d /sys/class/net/"${1:-${IFACE}}"/brport ] - return $? -} - -_bridge_ports() -{ - for x in /sys/class/net/"${1:-${IFACE}}"/brif/*; do - n=${x##*/} - echo $n - done -} - -bridge_pre_start() -{ - local brif= oiface="${IFACE}" e= x= - # ports is for static add - local ports="$(_get_array "bridge_${IFVAR}")" - # old config options - local opts="$(_get_array "brctl_${IFVAR}")" - # brif is used for dynamic add - eval brif=\$bridge_add_${IFVAR} - - # we need a way to if the bridge exists in a variable name, not just the - # contents of a variable. Eg if somebody has only bridge_add_eth0='br0', - # with no other lines mentioning br0. - eval bridge_unset=\${bridge_${IFVAR}-y\} - eval brctl_unset=\${brctl_${IFVAR}-y\} - - if [ -z "${brif}" -a "${brctl_unset}" = 'y' ]; then - if [ -z "${ports}" -a "${bridge_unset}" = "y" ]; then - #eerror "Misconfigured static bridge detected (see net.example)" - return 0 - fi - fi - - # If the bridge was already up, we should clear it - [ "${bridge_unset}" != "y" ] && bridge_post_stop - - ( - # Normalize order of variables - if [ -z "${ports}" -a -n "${brif}" ]; then - # Dynamic mode detected - ports="${IFACE}" - IFACE="${brif}" - IFVAR=$(shell_var "${IFACE}") - else - # Static mode detected - ports="${ports}" - metric=1000 - fi - - if ! _is_bridge ; then - ebegin "Creating bridge ${IFACE}" - if ! brctl addbr "${IFACE}"; then - eend 1 - return 1 - fi - fi - - # TODO: does this reset the bridge every time we add a interface to the - # bridge? We should probably NOT do that. - - # Old configuration set mechanism - # Only a very limited subset of the options are available in the old - # configuration method. The sysfs interface is in the next block instead. - local IFS="$__IFS" - for x in ${opts}; do - unset IFS - set -- ${x} - x=$1 - shift - set -- "${x}" "${IFACE}" "$@" - brctl "$@" - done - unset IFS - - # New configuration set mechanism, matches bonding - for x in /sys/class/net/"${IFACE}"/bridge/*; do - [ -f "${x}" ] || continue - n=${x##*/} - eval s=\$${n}_${IFVAR} - if [ -n "${s}" ]; then - einfo "Setting ${n}: ${s}" - echo "${s}" >"${x}" || \ - eerror "Failed to configure $n (${n}_${IFVAR})" - fi - done - - if [ -n "${ports}" ]; then - einfo "Adding ports to ${IFACE}" - eindent - - local BR_IFACE="${IFACE}" - for x in ${ports}; do - ebegin "${x}" - local IFACE="${x}" - local IFVAR=$(shell_var "${IFACE}") - if ! _exists "${IFACE}" ; then - eerror "Cannot add non-existent interface ${IFACE} to ${BR_IFACE}" - return 1 - fi - # The interface is known to exist now - _up - if ! brctl addif "${BR_IFACE}" "${x}"; then - eend 1 - return 1 - fi - # Per-interface bridge settings - for x in /sys/class/net/"${IFACE}"/brport/*; do - [ -f "${x}" ] || continue - n=${x##*/} - eval s=\$${n}_${IFVAR} - if [ -n "${s}" ]; then - einfo "Setting ${n}@${IFACE}: ${s}" - echo "${s}" >"${x}" || \ - eerror "Failed to configure $n (${n}_${IFVAR})" - fi - done - eend 0 - done - eoutdent - fi - ) || return 1 - - # Bring up the bridge - _set_flag promisc - _up -} - -bridge_post_stop() -{ - local port= ports= delete=false extra= - - if _is_bridge "${IFACE}"; then - ebegin "Destroying bridge ${IFACE}" - _down - for x in /sys/class/net/"${IFACE}"/brif/*; do - [ -s $x ] || continue - n=${x##*/} - ports="${ports} ${n}" - done - delete=true - iface=${IFACE} - eindent - else - # We are taking down an interface that is part of a bridge maybe - ports="${IFACE}" - local brport_dir="/sys/class/net/${IFACE}/brport" - [ -d ${brport_dir} ] || return 0 - iface=$(readlink ${brport_dir}/bridge) - iface=${iface##*/} - [ -z "${iface}" ] && return 0 - extra=" from ${iface}" - fi - - for port in ${ports}; do - ebegin "Removing port ${port}${extra}" - local IFACE="${port}" - _set_flag -promisc - brctl delif "${iface}" "${port}" - eend $? - done - - if ${delete}; then - eoutdent - brctl delbr "${iface}" - eend $? - fi - - return 0 -} diff --git a/net/ccwgroup.sh b/net/ccwgroup.sh deleted file mode 100644 index aaf7de6b..00000000 --- a/net/ccwgroup.sh +++ /dev/null @@ -1,106 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -_config_vars="$_config_vars ccwgroup" - -ccwgroup_depend() -{ - before interface -} - -ccwgroup_load_modules() -{ - # make sure we have ccwgroup support or this is a crap shoot - if [ ! -d /sys/bus/ccwgroup ] ; then - modprobe -q ccwgroup - if [ ! -d /sys/bus/ccwgroup ] ; then - eerror "ccwgroup support missing in kernel" - return 1 - fi - fi - - # verify the specific interface is supported - if [ ! -d /sys/bus/ccwgroup/drivers/$1 ] ; then - modprobe $1 >/dev/null 2>&1 - if [ ! -d /sys/bus/ccwgroup/drivers/$1 ] ; then - eerror "$1 support missing in kernel" - return 1 - fi - fi - - return 0 -} - -ccwgroup_pre_start() -{ - local ccwgroup="$(_get_array "ccwgroup_${IFVAR}")" - [ -z "${ccwgroup}" ] && return 0 - - local ccw_type - eval ccw_type=\${ccwgroup_type_${IFVAR}:-qeth} - - ccwgroup_load_modules ${ccw_type} || return 1 - - einfo "Enabling ccwgroup/${ccw_type} on ${IFACE}" - - set -- ${ccwgroup} - local first=$1; shift - if [ -e /sys/devices/${ccw_type}/${first}/online ]; then - echo "0" >/sys/devices/${ccw_type}/${first}/online - else - echo "${first}$(printf ',%s' "$@")" >/sys/bus/ccwgroup/drivers/${ccw_type}/group - fi - - local var val - for var in $(_get_array "ccwgroup_opts_${IFVAR}") online=1 ; do - val=${var#*=} - var=${var%%=*} - echo "${val}" > /sys/devices/${ccw_type}/${first}/${var} - done - eend $? - - # Now that we've properly configured the device, we can run - # bring the interface up. Common code tried to do this already, - # but it failed because we didn't setup sysfs yet. - _up -} - -ccwgroup_pre_stop() -{ - local path="/sys/class/net/${IFACE}" - - # Erase any existing ccwgroup to be safe - service_set_value ccwgroup_device "" - service_set_value ccwgroup_type "" - - [ ! -L "${path}"/device/driver ] && return 0 - case "$(readlink "${path}"/device/driver)" in - */bus/ccwgroup/*) ;; - *) return 0;; - esac - - local device - device="$(readlink "${path}"/device)" - device=${device##*/} - service_set_value ccwgroup_device "${device}" - device="$(readlink "${path}"/device/driver)" - device=${device##*/} - service_set_value ccwgroup_type "${device}" -} - -ccwgroup_post_stop() -{ - local device="$(service_get_value ccwgroup_device)" - [ -z "${device}" ] && return 0 - local ccw_type="$(service_get_value ccwgroup_type)" - local path="/sys/devices/${ccw_type}/${device}" - - einfo "Disabling ccwgroup/${ccw_type} on ${IFACE}" - if echo "0" >"${path}"/online && - echo "1" >"${path}"/ungroup ; then - # The device doesn't disappear right away which breaks - # restart, or a quick start up, so wait around. - while [ -e "${path}" ] ; do :; done - fi - eend $? -} diff --git a/net/clip.sh b/net/clip.sh deleted file mode 100644 index 2fc290f4..00000000 --- a/net/clip.sh +++ /dev/null @@ -1,221 +0,0 @@ -# Copyright (c) 2005-2007 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -clip_depend() -{ - program /usr/sbin/atmsigd - before interface -} - -_config_vars="$_config_vars clip" - -# This starts a service. Albeit atmsigd, ilmid and atmarpd do allow for back- -# grounding through the -b option, its usage causes them to be sensible to -# SIGHUP, which is sent to all daemons when console detaches right after -# startup. This is probably due to the fact that these programs don't detach -# themself from the controlling terminal when backgrounding... The only way I -# see to overcame this is to use the --background option in start-stop-daemon, -# which is reported as a "last resort" method, but it acts correctly about this. -atmclip_svc_start() -{ - ebegin "Starting $2 Daemon ($1)" - start-stop-daemon --start \ - --background \ - --make-pidfile --pidfile "/var/run/$1.pid" \ - --exec "/usr/sbin/$1" -- -l syslog - eend $? -} - -atmclip_svcs_start() -{ - einfo "First CLIP instance: starting ATM CLIP daemons" - eindent - - if yesno ${clip_full:-yes}; then - atmclip_svc_start atmsigd "Signaling" && \ - atmclip_svc_start ilmid "Integrated Local Management Interface" && \ - atmclip_svc_start atmarpd "Address Resolution Protocol" - else - atmclip_svc_start atmarpd "Address Resolution Protocol" - fi - - local r=$? - - eoutdent - return ${r} -} - -atmclip_svc_stop() -{ - ebegin "Stopping $2 Daemon ($1)" - start-stop-daemon --stop --quiet \ - --pidfile "/var/run/$1.pid" \ - --exec "/usr/sbin/$1" - eend $? -} - -atmclip_svcs_stop() -{ - einfo "Last CLIP instance: stopping ATM CLIP daemons" - eindent - - # Heartake operation! - sync - - atmclip_svc_stop atmarpd "Address Resolution Protocol" - if yesno ${clip_full:-yes}; then - atmclip_svc_stop ilmid "Integrated Local Management Interface" - atmclip_svc_stop atmsigd "Signaling" - fi - - eoutdent -} - -are_atmclip_svcs_running() -{ - - start-stop-daemon --quiet --test --stop --pidfile /var/run/atmarpd.pid || return 1 - - if yesno ${clip_full:-yes}; then - start-stop-daemon --quiet --test --stop --pidfile /var/run/ilmid.pid || return 1 - start-stop-daemon --quiet --test --stop --pidfile /var/run/atmsigd.pid || return 1 - fi - - return 0 -} - -clip_pre_start() -{ - local clip= - eval clip=\$clip_${IFVAR} - [ -z "${clip}" ] && return 0 - - if [ ! -r /proc/net/atm/arp ]; then - modprobe clip && sleep 2 - if [ ! -r /proc/net/atm/arp ]; then - eerror "You need first to enable kernel support for ATM CLIP" - return 1 - fi - fi - - local started_here= - if ! are_atmclip_svcs_running; then - atmclip_svcs_start || return 1 - started_here=1 - fi - - if ! _exists; then - ebegin "Creating CLIP interface ${IFACE}" - atmarp -c "${IFACE}" - if ! eend $?; then - [ -z "${started_here}" ] && atmclip_svcs_stop - return 1 - fi - fi - - return 0 -} - -clip_post_start() -{ - local clip="$(_get_array "clip_${IFVAR}")" - [ -z "${clip}" ] && return 0 - - are_atmclip_svcs_running || return 1 - - # The atm tools (atmarpd?) are silly enough that they would not work with - # iproute2 interface setup as opposed to the ifconfig one. - # The workaround is to temporarily toggle the interface state from up - # to down and then up again, without touching its address. This (should) - # work with both iproute2 and ifconfig. - _down - _up - - # Now the real thing: create a PVC with our peer(s). - # There are cases in which the ATM interface is not yet - # ready to establish new VCCs. In that cases, atmarp would - # fail. Here we allow 10 retries to happen every 2 seconds before - # reporting problems. Also, when no defined VC can be established, - # we stop the ATM daemons. - local has_failures= i= - for i in ${clip}; do - local IFS="," - set -- ${i} - unset IFS - local peerip="$1"; shift - local ifvpivci="$1"; shift - ebegin "Creating PVC ${ifvpivci} for peer ${peerip}" - - local nleftretries=10 emsg= ecode= - while [ ${nleftretries} -gt 0 ]; do - : $(( nleftretries -= 1 )) - emsg="$(atmarp -s "${peerip}" "${ifvpivci}" "$@" 2>&1)" - ecode=$? && break - sleep 2 - done - - if ! eend ${ecode}; then - eerror "Creation failed for PVC ${ifvpivci}: ${emsg}" - has_failures=1 - fi - done - - if [ -n "${has_failures}" ]; then - clip_pre_stop "${iface}" - clip_post_stop "${iface}" - return 1 - else - return 0 - fi -} - -clip_pre_stop() -{ - are_atmclip_svcs_running || return 0 - - # We remove all the PVCs which may have been created by - # clip_post_start for this interface. This shouldn't be - # needed by the ATM stack, but sometimes I got a panic - # killing CLIP daemons without previously vacuuming - # every active CLIP PVCs. - # The linux 2.6's ATM stack is really a mess... - local itf= t= encp= idle= ipaddr= left= - einfo "Removing PVCs on this interface" - eindent - { - read left && \ - while read itf t encp idle ipaddr left; do - if [ "${itf}" = "${IFACE}" ]; then - ebegin "Removing PVC to ${ipaddr}" - atmarp -d "${ipaddr}" - eend $? - fi - done - } < /proc/net/atm/arp - eoutdent -} - -# Here we should teorically delete the interface previously created in the -# clip_pre_start function, but there is no way to "undo" an interface creation. -# We can just leave the interface down. "ifconfig -a" will still list it... -# Also, here we can stop the ATM CLIP daemons if there is no other CLIP PVC -# outstanding. We check this condition by inspecting the /proc/net/atm/arp file. -clip_post_stop() -{ - are_atmclip_svcs_running || return 0 - - local itf= left= hasothers= - { - read left && \ - while read itf left; do - if [ "${itf}" != "${IFACE}" ]; then - hasothers=1 - break - fi - done - } < /proc/net/atm/arp - - if [ -z "${hasothers}" ]; then - atmclip_svcs_stop || return 1 - fi -} diff --git a/net/dhclient.sh b/net/dhclient.sh deleted file mode 100644 index 8c100dd4..00000000 --- a/net/dhclient.sh +++ /dev/null @@ -1,76 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -dhclient_depend() -{ - after interface - program start /sbin/dhclient - provide dhcp -} - -_config_vars="$_config_vars dhcp dhcpcd" - -dhclient_start() -{ - local args= opt= opts= pidfile="/var/run/dhclient-${IFACE}.pid" - local sendhost=true dconf= - - # Get our options - # These options only work in Gentoo, and maybe RedHat - eval args=\$dhclient_${IFVAR} - eval opts=\$dhcp_${IFVAR} - [ -z "${opts}" ] && opts=${dhcp} - - for opt in ${opts}; do - case "${opt}" in - nodns) args="${args} -e PEER_DNS=no";; - nontp) args="${args} -e PEER_NTP=no";; - nogateway) args="${args} -e PEER_ROUTERS=no";; - nosendhost) sendhost=false;; - esac - done - - # Add our route metric - [ "${metric:-0}" != "0" ] && args="${args} -e IF_METRIC=${metric}" - - if ${sendhost}; then - local hname="$(hostname)" - if [ "${hname}" != "(none)" -a "${hname}" != "localhost" ]; then - dhconf="${dhconf} interface \"${IFACE}\" {" - dhconf="${dhconf} send host-name \"${hname}\";" - dhconf="${dhconf}}" - fi - fi - - # Bring up DHCP for this interface - ebegin "Running dhclient" - echo "${dhconf}" | start-stop-daemon --start --exec /sbin/dhclient \ - --pidfile "${pidfile}" \ - -- ${args} -q -1 -pf "${pidfile}" "${IFACE}" - eend $? || return 1 - - _show_address - return 0 -} - -dhclient_stop() -{ - local pidfile="/var/run/dhclient-${IFACE}.pid" opts= - [ ! -f "${pidfile}" ] && return 0 - - # Get our options - if [ -x /sbin/dhclient ]; then - eval opts=\$dhcp_${IFVAR} - [ -z "${opts}" ] && opts=${dhcp} - fi - - ebegin "Stopping dhclient on ${IFACE}" - case " ${opts} " in - *" release "*) dhclient -q -r -pf "${pidfile}" "${IFACE}";; - *) - start-stop-daemon --stop --quiet \ - --exec /sbin/dhclient --pidfile "${pidfile}" - ;; - esac - eend $? -} diff --git a/net/dhcpcd.sh b/net/dhcpcd.sh deleted file mode 100644 index 2c0f9197..00000000 --- a/net/dhcpcd.sh +++ /dev/null @@ -1,88 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -dhcpcd_depend() -{ - after interface - program start dhcpcd - provide dhcp - - # We prefer dhcpcd over the others - after dhclient pump udhcpc -} - -_config_vars="$_config_vars dhcp dhcpcd" - -dhcpcd_start() -{ - local args= opt= opts= pidfile="/var/run/dhcpcd-${IFACE}.pid" new=true - eval args=\$dhcpcd_${IFVAR} - [ -z "${args}" ] && args=${dhcpcd} - - # Get our options - eval opts=\$dhcp_${IFVAR} - [ -z "${opts}" ] && opts=${dhcp} - - case "$(dhcpcd --version)" in - "dhcpcd "[123]*) new=false;; - esac - - # Map some generic options to dhcpcd - for opt in ${opts}; do - case "${opt}" in - nodns) - if ${new}; then - args="${args} -C resolv.conf" - else - args="${args} -R" - fi - ;; - nontp) - if ${new}; then - args="${args} -C ntp.conf" - else - args="${args} -N" - fi - ;; - nonis) - if ${new}; then - args="${args} -C yp.conf" - else - args="${args} -Y" - fi - ;; - nogateway) args="${args} -G";; - nosendhost) args="${args} -h ''"; - esac - done - - # Add our route metric if not given - case " $args " in - *" -m "*) ;; - *) [ "${metric:-0}" != 0 ] && args="$args -m $metric";; - esac - - # Bring up DHCP for this interface - ebegin "Running dhcpcd" - - eval dhcpcd "${args}" "${IFACE}" - eend $? || return 1 - - _show_address - return 0 -} - -dhcpcd_stop() -{ - local pidfile="/var/run/dhcpcd-${IFACE}.pid" opts= sig=SIGTERM - [ ! -f "${pidfile}" ] && return 0 - - ebegin "Stopping dhcpcd on ${IFACE}" - eval opts=\$dhcp_${IFVAR} - [ -z "${opts}" ] && opts=${dhcp} - case " ${opts} " in - *" release "*) sig=SIGHUP;; - esac - start-stop-daemon --stop --quiet --signal ${sig} --pidfile "${pidfile}" - eend $? -} diff --git a/net/ethtool.sh b/net/ethtool.sh deleted file mode 100644 index 6023d749..00000000 --- a/net/ethtool.sh +++ /dev/null @@ -1,52 +0,0 @@ -# Copyright (c) 2011 by Gentoo Foundation -# Released under the 2-clause BSD license. - -ethtool_depend() -{ - program ethtool - before interface -} - -# This is just to trim whitespace, do not add any quoting! -_trim() { - echo $* -} - -ethtool_pre_start() { - local order opt OFS="${OIFS}" - eval order=\$ethtool_order_${IFVAR} - [ -z "${order}" ] && eval order=\$ethtool_order - [ -z "${order}" ] && order="flash change-eeprom change pause coalesce ring offload identify nfc rxfh-indir ntuple" - # ethtool options not used: --driver, --register-dump, --eeprom-dump, --negotiate, --test, --statistics - eindent - for opt in ${order} ; do - local args - eval args=\$ethtool_$(echo $opt | tr - _)_${IFVAR} - - # Skip everything if no arguments - [ -z "${args}" ] && continue - - # Split on \n - OIFS="${IFS}" - local IFS="$__IFS" - - for p in ${args} ; do - IFS="${OIFS}" - local args_pretty="$(_trim "${p}")" - # Do nothing if empty - [ -z "${args_pretty}" ] && continue - [ "${opt}" = "ring" ] && opt="set-ring" - args_pretty="--${opt} $IFACE ${args_pretty}" - args="--${opt} $IFACE ${args}" - ebegin "ethtool ${args_pretty}" - ethtool ${args} - rc=$? - eend $rc "ethtool exit code $rc" - # TODO: ethtool has MANY different exit codes, with no - # documentation as to which ones are fatal or not. For now we - # simply print the exit code and don't stop the start sequence. - done - IFS="${OIFS}" - done - eoutdent -} diff --git a/net/firewalld.sh b/net/firewalld.sh deleted file mode 100644 index ae83c575..00000000 --- a/net/firewalld.sh +++ /dev/null @@ -1,38 +0,0 @@ -# Copyright (c) 2012 Doug Goldstein -# Released under the 2-clause BSD license. - -firewalld_depend() -{ - after interface - before dhcp - program firewall-cmd - [ "$IFACE" != "lo" ] && need firewalld -} - -_config_vars="$_config_vars firewalld_zone" - -firewalld_post_start() -{ - local firewalld_zone= - eval firewalld_zone=\$firewalld_zone_${IFVAR} - - _exists || return 0 - - if [ "${IFACE}" != "lo" ]; then - firewall-cmd --zone="${firewalld_zone}" \ - --change-interface="${IFACE}" > /dev/null 2>&1 - fi - - return 0 -} - -firewalld_pre_stop() -{ - _exists || return 0 - - if [ "${IFACE}" != "lo" ]; then - firewall-cmd --remove-interface="${IFACE}" > /dev/null 2>&1 - fi - - return 0 -} diff --git a/net/ifconfig.sh.BSD.in b/net/ifconfig.sh.BSD.in deleted file mode 100644 index c7e98a28..00000000 --- a/net/ifconfig.sh.BSD.in +++ /dev/null @@ -1,264 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -ifconfig_depend() -{ - program /sbin/ifconfig - provide interface -} - -_exists() -{ - # Only FreeBSD sees to have /dev/net .... is there something - # other than ifconfig we can use for the others? - if [ -d /dev/net ]; then - [ -e /dev/net/"${IFACE}" ] - else - ifconfig "${IFACE}" >/dev/null 2>&1 - fi -} - -_up() -{ - ifconfig "${IFACE}" up -} - -_down() -{ - ifconfig "${IFACE}" down -} - -_ifindex() -{ - local x= i=1 - case "${RC_UNAME}" in - FreeBSD|DragonFly) - for x in /dev/net[0-9]*; do - if [ "${x}" -ef /dev/net/"${IFACE}" ]; then - echo "${x#/dev/net}" - return 0 - fi - : $(( i += 1 )) - done - ;; - default) - for x in $(ifconfig -l); do - if [ "${x}" = "${IFACE}" ]; then - echo "${i}" - return 0 - fi - : $(( i += 1 )) - done - ;; - esac - - # Return the next available index - echo "${i}" - return 1 -} - -_ifconfig_ent() -{ - LC_ALL=C ifconfig "${IFACE}" 2>/dev/null | while read ent rest; do - case "${ent}" in - $1) echo "${rest}";; - esac - done -} - -_get_mac_address() -{ - local ent="ether" - case "${RC_UNAME}" in - NetBSD|OpenBSD) ent="address:";; - esac - - case $(_ifconfig_ent "${ent}") in - 00:00:00:00:00:00);; - 44:44:44:44:44:44);; - FF:FF:FF:FF:FF:FF);; - "") return 1;; - *) echo "${address}";; - esac - - return 0; -} - - -_is_wireless() -{ - case "$(_ifconfig_ent "media:")" in - IEEE802.11*|"IEEE 802.11 Wireless"*) return 0;; - *) return 1;; - esac -} - -_get_inet_address() -{ - local inet= address= n= netmask= rest= - LC_ALL=C ifconfig "${IFACE}" | while read inet address n netmask rest; do - if [ "${inet}" = "inet" ]; then - echo "${address}/$(_netmask2cidr "${netmask}")" - return 0 - fi - done -} - -_add_address() -{ - local inet6= - - case "$@" in - *:*) inet6=inet6;; - esac - - if [ "${metric:-0}" != "0" ]; then - set -- "$@" metric ${metric} - fi - - # ifconfig doesn't like CIDR addresses - case "${RC_UNAME}" in - OpenBSD) - local ip="${1%%/*}" cidr="${1##*/}" netmask= - if [ -n "${cidr}" -a "${cidr}" != "${ip}" ]; then - netmask="$(_cidr2netmask "${cidr}")" - shift - set -- "${ip}" netmask "${netmask}" "$@" - fi - ;; - esac - - ifconfig "${IFACE}" ${inet6} "$@" alias -} - -_add_route() -{ - if [ $# -gt 3 ]; then - if [ "$3" = "gw" -o "$3" = "via" ]; then - local one=$1 two=$2 - shift; shift; shift - set -- "${one}" "${two}" "$@" - fi - fi - - case "$@" in - *:*) route add -inet6 "$@";; - *) route add "$@";; - esac -} - -_delete_addresses() -{ - einfo "Removing addresses" - eindent - LC_ALL=C ifconfig "${IFACE}" | while read inet address ali rest; do - case "${inet}" in - inet|inet6) - if [ "${address}" = "alias" ]; then - address="${ali}" - fi - case "${address}" in - *"%${IFACE}"|::1) continue;; - 127.0.0.1) [ "${IFACE}" = "lo0" ] && continue;; - esac - einfo "${address}" - ifconfig "${IFACE}" "${inet}" "${address}" -alias - eend $? - ;; - esac - done - eoutdent - return 0 -} - -_show_address() -{ - einfo "received address $(_get_inet_address "${IFACE}")" -} - -_has_carrier() -{ - case "$(_ifconfig_ent "status:")" in - ""|active|associated) return 0;; - *) return 1;; - esac -} - -ifconfig_pre_start() -{ - local config="$(_get_array "ifconfig_${IFVAR}")" conf= arg= args= - local IFS="$__IFS" - - [ -z "${config}" ] && return 0 - - veinfo "Running ifconfig commands" - eindent - for conf in ${config}; do - unset IFS - args= - for arg in ${conf}; do - case ${arg} in - [Dd][Hh][Cc][Pp]);; - [Nn][Oo][Aa][Uu][Tt][Oo]);; - [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]);; - [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]);; - [Ww][Pp][Aa]);; - *) args="${args} ${arg}";; - esac - done - - [ -z "${args}" ] && continue - vebegin "ifconfig${args}" - eval ifconfig "${IFACE}" "${args}" - veend $? - done - eoutdent - - return 0 -} - -_ifconfig_ipv6_tentative() -{ - local inet= address= rest= - LC_ALL=C ifconfig "${IFACE}" | while read inet address rest; do - case "${inet}" in - inet6) - case "${rest}" in - *" "tentative*) return 2;; - esac - ;; - esac - done - [ $? = 2 ] -} - -ifconfig_post_start() -{ - if _ifconfig_ipv6_tentative; then - ebegin "Waiting for IPv6 addresses" - while true; do - _ifconfig_ipv6_tentative || break - done - eend 0 - fi -} - -# Is the interface administratively/operationally up? -# The 'UP' status in ifconfig is the administrative status -# Operational state does not seem to be available in BSD? -# 0: up -# 1: down -# 2: invalid arguments -is_admin_up() -{ - local iface="$1" - [ -z "$iface" ] && iface="$IFACE" - ifconfig "${iface}" | \ - sed -n '1,1{ /flags=.*[<,]UP[,>]/{ q 0 }}; q 1; ' -} - -is_oper_up() -{ - eerror "TODO: is_oper_up not available on BSD" - return 2 -} diff --git a/net/ifconfig.sh.Linux.in b/net/ifconfig.sh.Linux.in deleted file mode 100644 index 2afa66cb..00000000 --- a/net/ifconfig.sh.Linux.in +++ /dev/null @@ -1,328 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -ifconfig_depend() -{ - program /sbin/ifconfig /bin/ifconfig - provide interface -} - -_up() -{ - ifconfig "${IFACE}" up -} - -_down() -{ - ifconfig "${IFACE}" down -} - -_exists() -{ - [ -e /sys/class/net/"$IFACE" ] -} - -_ifindex() -{ - local index=-1 - local f v - if [ -e /sys/class/net/"${IFACE}"/ifindex ]; then - index=$(cat /sys/class/net/"${IFACE}"/ifindex) - else - for f in /sys/class/net/*/ifindex ; do - v=$(cat $f) - [ $v -gt $index ] && index=$v - done - : $(( index += 1 )) - fi - echo "${index}" - return 0 -} - -_is_wireless() -{ - # Support new sysfs layout - [ -d /sys/class/net/"${IFACE}"/wireless -o \ - -d /sys/class/net/"${IFACE}"/phy80211 ] && return 0 - - [ ! -e /proc/net/wireless ] && return 1 - grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless -} - -_set_flag() -{ - ifconfig "${IFACE}" "$1" -} - -_get_mac_address() -{ - local mac=$(LC_ALL=C ifconfig "${IFACE}" | \ - sed -n -e 's/.* \(HWaddr\|ether\) \(..:..:..:..:..:..\).*/\2/p') - - case "${mac}" in - 00:00:00:00:00:00);; - 44:44:44:44:44:44);; - FF:FF:FF:FF:FF:FF);; - "");; - *) echo "${mac}"; return 0;; - esac - - return 1 -} - -_set_mac_address() -{ - ifconfig "${IFACE}" hw ether "$1" -} - -_get_inet_address() -{ - set -- $(LC_ALL=C ifconfig "${IFACE}" | - sed -n -e 's/.*\(inet addr:\|inet \)\([^ ]*\).*\(Mask:\|netmask \)\([^ ]*\).*/\2 \4/p') - [ -z "$1" ] && return 1 - - echo -n "$1" - shift - echo "/$(_netmask2cidr "$1")" -} - -_get_inet_addresses() -{ - local iface=${IFACE} i=0 - local addrs="$(_get_inet_address)" - - while true; do - local IFACE="${iface}:${i}" - _exists || break - local addr="$(_get_inet_address)" - [ -n "${addr}" ] && addrs="${addrs}${addrs:+ }${addr}" - : $(( i += 1 )) - done - echo "${addrs}" -} - -_cidr2netmask() -{ - local cidr="$1" netmask="" done=0 i=0 sum=0 cur=128 - local octets= frac= - - local octets=$(( cidr / 8 )) - local frac=$(( cidr % 8 )) - while [ ${octets} -gt 0 ]; do - netmask="${netmask}.255" - : $(( octets -= 1 )) - : $(( done += 1 )) - done - - if [ ${done} -lt 4 ]; then - while [ ${i} -lt ${frac} ]; do - : $(( sum += cur )) - : $(( cur /= 2 )) - : $(( i += 1 )) - done - netmask="${netmask}.${sum}" - : $(( done += 1 )) - - while [ ${done} -lt 4 ]; do - netmask="${netmask}.0" - : $(( done += 1 )) - done - fi - - echo "${netmask#.*}" -} - -_add_address() -{ - if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ]; then - ifconfig "${IFACE}" "$@" 2>/dev/null - return 0 - fi - - case "$1" in - *:*) ifconfig "${IFACE}" inet6 add "$@"; return $?;; - esac - - # IPv4 is tricky - ifconfig requires an aliased device - # for multiple addresses - local iface="${IFACE}" - if LC_ALL=C ifconfig "${iface}" | grep -Eq '\/dev/null)" ] && return 0 - - ebegin "Destroying tunnel ${IFACE}" - iptunnel del "${IFACE}" - eend $? -} - -# Is the interface administratively/operationally up? -# The 'UP' status in ifconfig/iproute2 is the administrative status -# Operational state is available in iproute2 output as 'state UP', or the -# operstate sysfs variable. -# 0: up -# 1: down -# 2: invalid arguments -is_admin_up() -{ - local iface="$1" - [ -z "$iface" ] && iface="$IFACE" - ifconfig "${iface}" | \ - sed -n '1,1{ /flags=.*[<,]UP[,>]/{ q 0 }}; q 1; ' -} - -is_oper_up() -{ - local iface="$1" - [ -z "$iface" ] && iface="$IFACE" - read state -# Released under the 2-clause BSD license. - -_config_vars="$_config_vars plug_timeout" - -ifplugd_depend() -{ - program start /usr/sbin/ifplugd - after macnet rename - before interface - provide plug -} - -ifplugd_pre_start() -{ - local pidfile="/var/run/ifplugd.${IFACE}.pid" timeout= args= - - # We don't start ifplugd if we're being called from the background - yesno ${IN_BACKGROUND} && return 0 - - _exists || return 0 - - # We need a valid MAC address - # It's a basic test to ensure it's not a virtual interface - if ! _get_mac_address >/dev/null 2>&1; then - vewarn "ifplugd only works on interfaces with a valid MAC address" - return 0 - fi - - # We don't work on bonded, bridges, tun/tap, vlan or wireless - for f in bond bridge tuntap vlan wireless; do - if type "_is_${f}" >/dev/null 2>&1; then - if _is_${f}; then - veinfo "ifplugd does not work with ${f}" - return 0 - fi - fi - done - - ebegin "Starting ifplugd on ${IFACE}" - - eval args=\$ifplugd_${IFVAR} - - # Mark the us as inactive so netplug can restart us - mark_service_inactive - - # Start ifplugd - eval start-stop-daemon --start --exec /usr/sbin/ifplugd \ - --pidfile "${pidfile}" -- "${args}" --iface="${IFACE}" - eend $? || return 1 - - eindent - - # IFACE-specific, then global, then default - eval timeout=\$plug_timeout_${IFVAR} - [ -z "${timeout}" ] && timeout=$plug_timeout - [ -z "${timeout}" ] && timeout=-1 - if [ ${timeout} -eq 0 ]; then - ewarn "WARNING: infinite timeout set for ${IFACE} to come up" - elif [ ${timeout} -lt 0 ]; then - einfo "Backgrounding ..." - exit 1 - fi - - veinfo "Waiting for ${IFACE} to be marked as started" - - local i=0 - while true; do - if service_started; then - _show_address - exit 0 - fi - sleep 1 - [ ${timeout} -eq 0 ] && continue - : $(( i += 1 )) - [ ${i} -ge ${timeout} ] && break - done - - eend 1 "Failed to configure ${IFACE} in the background" - exit 1 -} - -ifplugd_stop() -{ - yesno ${IN_BACKGROUND} && return 0 - - local pidfile="/var/run/ifplugd.${IFACE}.pid" - [ ! -e "${pidfile}" ] && return 0 - - ebegin "Stopping ifplugd on ${IFACE}" - start-stop-daemon --stop --quiet --exec /usr/sbin/ifplugd \ - --pidfile "${pidfile}" --signal QUIT - eend $? -} diff --git a/net/ifwatchd.sh b/net/ifwatchd.sh deleted file mode 100644 index a39e1c18..00000000 --- a/net/ifwatchd.sh +++ /dev/null @@ -1,59 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -_config_vars="$_config_vars plug_timeout" - -ifwatchd_depend() -{ - program start /usr/sbin/ifwatchd - after macnet rename wireless - before interface - provide plug -} - -ifwatchd_pre_start() -{ - # We don't start ifwatchd if we're being called from the background - yesno ${IN_BACKGROUND} && return 0 - - _exists || return 0 - - # We need a valid MAC address - # It's a basic test to ensure it's not a virtual interface - if ! _get_mac_address >/dev/null 2>&1; then - vewarn "ifwatchd only works on interfaces with a valid MAC address" - return 0 - fi - - ebegin "Starting ifwatchd on ${IFACE}" - - # Mark the us as inactive so ifwatchd can restart us - mark_service_inactive - - # Start ifwatchd - IN_BACKGROUND=yes ; export IN_BACKGROUND - start-stop-daemon --start --exec /usr/sbin/ifwatchd \ - -- -c "${RC_LIBEXECDIR}/sh/ifwatchd-carrier.sh" \ - -n "${RC_LIBEXECDIR}/sh/ifwatchd-nocarrier.sh" "${IFACE}" - unset IN_BACKGROUND - eend "$?" || return 1 - - einfo "Backgrounding ..." - exit 1 -} - -ifwatchd_stop() -{ - yesno ${IN_BACKGROUND} && return 0 - - start-stop-daemon --test --quiet --stop --exec /usr/sbin/ifwatchd \ - -- -c "${RC_LIBEXECDIR}/sh/ifwatchd-carrier.sh" \ - -n "${RC_LIBEXECDIR}/sh/ifwatchd-nocarrier.sh" "${IFACE}" \ - || return 0 - - ebegin "Stopping ifwatchd on" "${IFACE}" - start-stop-daemon --stop --exec /usr/sbin/ifwatchd \ - -- -c "${RC_LIBEXECDIR}/sh/ifwatchd-carrier.sh" \ - -n "${RC_LIBEXECDIR}/sh/ifwatchd-nocarrier.sh" "${IFACE}" - eend $? -} diff --git a/net/ip6rd.sh b/net/ip6rd.sh deleted file mode 100644 index a35e2b76..00000000 --- a/net/ip6rd.sh +++ /dev/null @@ -1,175 +0,0 @@ -# Copyright (c) 2011 by Gentoo Foundation -# Released under the 2-clause BSD license. - -_config_vars="$_config_vars link prefix suffix ipv4mask relay" - -ip6rd_depend() -{ - program ip - after interface -} - -ip6rd_pre_start() -{ - # ALL interfaces run pre_start blocks, not just those with something - # assigned, so we must check if we need to run on this interface before we - # do so. - local config - eval config=\$config_${IFVAR} - [ "$config" = "ip6rd" ] || return 0 - - case "${MODULES}" in - *" ifconfig "*) - eerror "ifconfig is not supported for 6rd" - eerror "Please emerge sys-apps/iproute2" - return 1 - ;; - esac - - local host= suffix= relay= addr= iface=${IFACE} config_ip6rd= localip= ipv4mask= - eval host=\$link_${IFVAR} - if [ -z "${host}" ]; then - eerror "link_${IFVAR} not set" - return 1 - fi - - eval host=\${link_${IFVAR}} - eval ipv4mask=\${ipv4mask_${IFVAR}:-0} - eval suffix=\${suffix_${IFVAR}:-1} - eval relay=\${relay_${IFVAR}} - eval prefix=\${prefix_${IFVAR}} - - IFACE=${host} - addrs=$(_get_inet_addresses) - IFACE=${iface} - if [ -z "${addrs}" ]; then - eerror "${host} is not configured with an IPv4 address" - return 1 - fi - # TODO: Get this settings from DHCP (Option 212) - if [ -z "${prefix}" ]; then - eerror "prefix_${IFVAR} not set" - return 1 - fi - if [ -z "${relay}" ]; then - eerror "relay_${IFVAR} not set" - return 1 - fi - for addr in ${addrs}; do - # Strip the subnet - local ip="${addr%/*}" subnet="${addr#*/}" - # We don't work on private IPv4 addresses - if _ip6rd_inet_is_private_network "${ip}" - then - continue - fi - - local ip6= ip6_prefix="${prefix%::/*}" ip6_subnet="${prefix#*/}" - ip6_subnet=$((ip6_subnet + (32-ipv4mask))) - eval ip6="$(printf "${ip6_prefix}:%s::%s" \ - $(_ip6rd_prefix_shave_bits ${ip} ${ipv4mask}) ${suffix})" - veinfo "Derived IPv6 address: ${ip6}" - - # Now apply our IPv6 address to our config - config_ip6rd="${config_ip6rd}${config_ip6rd:+ }${ip6}/${ip6_subnet}" - - if [ -n "${localip}" ]; then - localip="any" - else - localip="${ip}" - fi - done - - if [ -z "${config_ip6rd}" ]; then - eerror "No global IPv4 addresses found on interface ${host}" - return 1 - fi - - ebegin "Creating 6rd tunnel ${IFACE}" - if [ "${IFACE}" != "sit0" ]; then - _tunnel add "${IFACE}" mode sit ttl 255 remote any local "${localip}" - fi - _tunnel 6rd dev "${IFACE}" 6rd-prefix "${prefix}" - eend $? || return 1 - _up - - routes_ip6rd="2003::/3 via ::${relay} metric 2147483647" - service_set_value "config_ip6rd_$IFVAR" "$config_ip6rd" - service_set_value "routes_ip6rd_$IFVAR" "$routes_ip6rd" -} - -ip6rd_start() -{ - local config_ip6rd=$(service_get_value "config_ip6rd_$IFVAR") - local routes_ip6rd=$(service_get_value "routes_ip6rd_$IFVAR") - - # Now apply our config - eval config_${config_index}=\'"${config_ip6rd}"\' - : $(( config_index -= 1 )) - - # Add a route for us, ensuring we don't delete anything else - local routes="$(_get_array "routes_${IFVAR}") -$routes_ip6rd" - eval routes_${IFVAR}=\$routes -} - -_ip6rd_inet_atoi() -{ - local IFS="${IFS}." ipi=0 j=3 - for i in $1 ; do - # post-decrement isn't valid - ipi=$(( ipi | (i << (8*j)) )) - j=$(( j - 1 )) - done - echo ${ipi} -} - -_ip6rd_inet_itoa() -{ - local ipi=$1 bitmask v - bitmask=$(( (1 << 24)-1 )) - for i in 0 1 2 3; do - v=$(( (ipi & ~bitmask) >> 24 )) - ipi=$(( (ipi & bitmask) << 8 )) - if [ $i != 3 ] ; then - printf "%d." $v - else - printf "%d\n" $v - fi - done -} - -_ip6rd_inet_get_network() -{ - local a=$(_ip6rd_inet_atoi $1) - local net=$(( a & ( (1<<$2)-1 ) )) - local cidr=$(( 32 - $2 )) - echo $(_ip6rd_inet_itoa $(( (net << cidr ) )) ) -} - -_ip6rd_inet_is_private_network() -{ - if [ "$(_ip6rd_inet_get_network $1 16)" = "192.168.0.0" ]\ - || [ "$(_ip6rd_inet_get_network $1 8)" = "10.0.0.0" ]\ - || [ "$(_ip6rd_inet_get_network $1 12)" = "172.16.0.0" ]\ - || [ "$(_ip6rd_inet_get_network $1 16)" = "169.254.0.0" ] - then - return 0; - fi - return 1; -} - -_ip6rd_prefix_shave_bits() -{ - local ipi= - ipi=$(( ($(_ip6rd_inet_atoi $1) & (1<<(32-$2))-1) << $2)) - if [ $2 -le 16 ] - then - printf "%04x:%0$(( (16-$2>>2)+(($2%4)?1:0) ))x" \ - $((ipi >> 16)) $((ipi & (1<<(16-$2))-1)) - elif [ $2 -lt 32 ] - then - printf "%0$(( (32-$2>>2)+(($2%4)?1:0) ))x" \ - $((ipi >> 16)) - fi -} diff --git a/net/ip6to4.sh b/net/ip6to4.sh deleted file mode 100644 index 51b38581..00000000 --- a/net/ip6to4.sh +++ /dev/null @@ -1,116 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -_config_vars="$_config_vars link suffix relay" - -ip6to4_depend() -{ - after interface - program ip -} - -ip6to4_pre_start() -{ - # ALL interfaces run pre_start blocks, not just those with something - # assigned, so we must check if we need to run on this interface before we - # do so. - local config - eval config=\$config_${IFVAR} - [ "$config" = "ip6to4" ] || return 0 - - case " ${MODULES} " in - *" ifconfig "*) - if [ "${IFACE}" != "sit0" ]; then - eerror "ip6to4 can only work on the sit0 interface using ifconfig" - eerror "emerge sys-apps/iproute2 to use other interfaces" - return 1 - fi - esac - - local host= suffix= relay= addr= iface=${IFACE} config_ip6to4= localip= - eval host=\$link_${IFVAR} - if [ -z "${host}" ]; then - eerror "link_${IFVAR} not set" - return 1 - fi - - eval suffix=\${suffix_${IFVAR}:-1} - eval relay=\${relay_${IFVAR}:-192.88.99.1} - - IFACE=${host} - addrs=$(_get_inet_addresses) - IFACE=${iface} - if [ -z "${addrs}" ]; then - eerror "${host} is not configured with an IPv4 address" - return 1 - fi - - for addr in ${addrs}; do - # Strip the subnet - local ip="${addr%/*}" subnet="${addr#*/}" - # We don't work on private IPv4 addresses - case "${ip}" in - 127.*) continue;; - 10.*) continue;; - 192.168.*) continue;; - 172.*) - local i=16 - while [ ${i} -lt 32 ]; do - case "${ip}" in - 172.${i}.*) break;; - esac - : $(( i += 1 )) - done - [ ${i} -lt 32 ] && continue - ;; - esac - - veinfo "IPv4 address on ${host}: ${ip}/${subnet}" - local ipa= ip6= IFS="${IFS}." - for i in ${ip}; do - ipa="${ipa} ${i}" - done - unset IFS - eval ip6="$(printf "2002:%02x%02x:%02x%02x::%s" ${ipa} ${suffix})" - veinfo "Derived IPv6 address: ${ip6}" - - # Now apply our IPv6 address to our config - config_ip6to4="${config_ip6to4}${config_ip6to4:+ }${ip6}/48" - - if [ -n "${localip}" ]; then - localip="any" - else - localip="${ip}" - fi - done - - if [ -z "${config_ip6to4}" ]; then - eerror "No global IPv4 addresses found on interface ${host}" - return 1 - fi - - if [ "${IFACE}" != "sit0" ]; then - ebegin "Creating 6to4 tunnel on ${IFACE}" - _tunnel add "${IFACE}" mode sit ttl 255 remote any local "${localip}" - eend $? || return 1 - _up - fi - routes_ip6to4="2003::/3 via ::${relay} metric 2147483647" - service_set_value "config_ip6to4_$IFVAR" "$config_ip6to4" - service_set_value "routes_ip6to4_$IFVAR" "$routes_ip6to4" -} - -ip6to4_start() -{ - local config_ip6to4=$(service_get_value "config_ip6to4_$IFVAR") - local routes_ip6to4=$(service_get_value "routes_ip6to4_$IFVAR") - - # Now apply our config - eval config_${config_index}=\'"${config_ip6to4}"\' - : $(( config_index -= 1 )) - - # Add a route for us, ensuring we don't delete anything else - local routes="$(_get_array "routes_${IFVAR}") -$routes_ip6to4" - eval routes_${IFVAR}=\$routes -} diff --git a/net/ipppd.sh b/net/ipppd.sh deleted file mode 100644 index 537065a9..00000000 --- a/net/ipppd.sh +++ /dev/null @@ -1,48 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -ipppd_depend() -{ - program start /usr/sbin/ipppd - after macnet - before interface - provide isdn -} - -_config_vars="$_config_vars ipppd" - -ipppd_pre_start() -{ - local opts= pidfile="/var/run/ipppd-${IFACE}.pid" - - # Check that we are a valid ippp interface - case "${IFACE}" in - ippp[0-9]*);; - *) return 0;; - esac - - # Check that the interface exists - _exists || return 1 - - # Might or might not be set in conf.d/net - eval opts=\$ipppd_${IFVAR} - - einfo "Starting ipppd for ${IFACE}" - start-stop-daemon --start --exec /usr/sbin/ipppd \ - --pidfile "${pidfile}" \ - -- ${opts} pidfile "${pidfile}" \ - file "/etc/ppp/options.${IFACE}" >/dev/null - eend $? -} - -ipppd_post_stop() -{ - local pidfile="/var/run/ipppd-${IFACE}.pid" - - [ ! -f "${pidfile}" ] && return 0 - - einfo "Stopping ipppd for ${IFACE}" - start-stop-daemon --stop --quiet --exec /usr/sbin/ipppd \ - --pidfile "${pidfile}" - eend $? -} diff --git a/net/iproute2.sh b/net/iproute2.sh deleted file mode 100644 index 3bab7b74..00000000 --- a/net/iproute2.sh +++ /dev/null @@ -1,404 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -iproute2_depend() -{ - program ip - provide interface - after ifconfig -} - -_up() -{ - ip link set dev "${IFACE}" up -} - -_down() -{ - ip link set dev "${IFACE}" down -} - -_exists() -{ - [ -e /sys/class/net/"$IFACE" ] -} - -_ifindex() -{ - local index=-1 - local f v - if [ -e /sys/class/net/"${IFACE}"/ifindex ]; then - index=$(cat /sys/class/net/"${IFACE}"/ifindex) - else - for f in /sys/class/net/*/ifindex ; do - v=$(cat $f) - [ $v -gt $index ] && index=$v - done - : $(( index += 1 )) - fi - echo "${index}" - return 0 -} - -_is_wireless() -{ - # Support new sysfs layout - [ -d /sys/class/net/"${IFACE}"/wireless -o \ - -d /sys/class/net/"${IFACE}"/phy80211 ] && return 0 - - [ ! -e /proc/net/wireless ] && return 1 - grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless -} - -_set_flag() -{ - local flag=$1 opt="on" - if [ "${flag#-}" != "${flag}" ]; then - flag=${flag#-} - opt="off" - fi - ip link set dev "${IFACE}" "${flag}" "${opt}" -} - -_get_mac_address() -{ - local mac=$(LC_ALL=C ip link show "${IFACE}" | sed -n \ - -e 'y/abcdef/ABCDEF/' \ - -e '/link\// s/^.*\<\(..:..:..:..:..:..\)\>.*/\1/p') - - case "${mac}" in - 00:00:00:00:00:00);; - 44:44:44:44:44:44);; - FF:FF:FF:FF:FF:FF);; - "");; - *) echo "${mac}"; return 0;; - esac - - return 1 -} - -_set_mac_address() -{ - ip link set dev "${IFACE}" address "$1" -} - -_get_inet_addresses() -{ - LC_ALL=C ip -family inet addr show "${IFACE}" | \ - sed -n -e 's/.*inet \([^ ]*\).*/\1/p' -} - -_get_inet_address() -{ - set -- $(_get_inet_addresses) - [ $# = "0" ] && return 1 - echo "$1" -} - -_add_address() -{ - if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ]; then - ip addr add "$@" dev "${IFACE}" 2>/dev/null - return 0 - fi - local x - local address netmask broadcast peer anycast label scope - local valid_lft preferred_lft home nodad - local confflaglist - address="$1" ; shift - while [ -n "$*" ]; do - x=$1 ; shift - case "$x" in - netmask|ne*) - netmask="/$(_netmask2cidr "$1")" ; shift ;; - broadcast|brd|br*) - broadcast="$1" ; shift ;; - pointopoint|pointtopoint|peer|po*|pe*) - peer="$1" ; shift ;; - anycast|label|scope|valid_lft|preferred_lft|a*|l*|s*|v*|pr*) - case $x in - a*) x=anycast ;; - l*) x=label ;; - s*) x=scope ;; - v*) x=valid_lft ;; - pr*) x=preferred_lft ;; - esac - eval "$x=$1" ; shift ;; - home|nodad|h*|no*) - case $x in h*) x=home ;; n*) x=nodad ;; esac - # FIXME: If we need to reorder these, this will take more code - confflaglist="${confflaglist} $x" ; ;; - *) - ewarn "Unknown argument to config_$IFACE: $x" - esac - done - - # Always scope lo addresses as host unless specified otherwise - if [ "${IFACE}" = "lo" ]; then - [ -z "$scope" ] && scope="host" - fi - - # figure out the broadcast address if it is not specified - # This must NOT be set for IPv6 addresses - if [ "${address#*:}" = "${address}" ]; then - [ -z "$broadcast" ] && broadcast="+" - elif [ -n "$broadcast" ]; then - eerror "Broadcast keywords are not valid with IPv6 addresses" - return 1 - fi - - # This must appear on a single line, continuations cannot be used - set -- "${address}${netmask}" ${peer:+peer} ${peer} ${broadcast:+broadcast} ${broadcast} ${anycast:+anycast} ${anycast} ${label:+label} ${label} ${scope:+scope} ${scope} dev "${IFACE}" ${valid_lft:+valid_lft} $valid_lft ${preferred_lft:+preferred_lft} $preferred_lft $confflaglist - veinfo ip addr add "$@" - ip addr add "$@" -} - -_add_route() -{ - local family= - - if [ "$1" = "-A" -o "$1" = "-f" -o "$1" = "-family" ]; then - family="-f $2" - shift; shift - elif [ "$1" = "-4" ]; then - family="-f inet" - shift - elif [ "$1" = "-6" ]; then - family="-f inet6" - shift - fi - - if [ $# -eq 3 ]; then - set -- "$1" "$2" via "$3" - elif [ "$3" = "gw" ]; then - local one=$1 two=$2 - shift; shift; shift - set -- "${one}" "${two}" via "$@" - fi - - local cmd= have_metric=false - while [ -n "$1" ]; do - case "$1" in - metric) cmd="${cmd} $1"; have_metric=true;; - netmask) cmd="${cmd}/$(_netmask2cidr "$2")"; shift;; - -host|-net);; - *) cmd="${cmd} $1";; - esac - shift - done - - # We cannot use a metric if we're using a nexthop - if ! ${have_metric} && \ - [ -n "${metric}" -a \ - "${cmd##* nexthop }" = "$cmd" ] - then - cmd="${cmd} metric ${metric}" - fi - - veinfo ip ${family} route append ${cmd} dev "${IFACE}" - ip ${family} route append ${cmd} dev "${IFACE}" - eend $? -} - -_delete_addresses() -{ - ip addr flush dev "${IFACE}" scope global 2>/dev/null - ip addr flush dev "${IFACE}" scope site 2>/dev/null - if [ "${IFACE}" != "lo" ]; then - ip addr flush dev "${IFACE}" scope host 2>/dev/null - fi - return 0 -} - -_has_carrier() -{ - LC_ALL=C ip link show dev "${IFACE}" | grep -q "LOWER_UP" -} - -_tunnel() -{ - ip tunnel "$@" -} - -# This is just to trim whitespace, do not add any quoting! -_trim() { - echo $* -} - -# This is our interface to Routing Policy Database RPDB -# This allows for advanced routing tricks -_ip_rule_runner() { - local cmd rules OIFS="${IFS}" family - if [ "$1" = "-4" -o "$1" = "-6" ]; then - family="$1" - shift - else - family="-4" - fi - cmd="$1" - rules="$2" - veindent - local IFS="$__IFS" - for ru in $rules ; do - unset IFS - ruN="$(_trim "${ru}")" - [ -z "${ruN}" ] && continue - vebegin "${cmd} ${ruN}" - ip $family rule ${cmd} ${ru} - veend $? - local IFS="$__IFS" - done - IFS="${OIFS}" - veoutdent -} - -iproute2_pre_start() -{ - local tunnel= - eval tunnel=\$iptunnel_${IFVAR} - if [ -n "${tunnel}" ]; then - # Set our base metric to 1000 - metric=1000 - # Bug#347657: If the mode is 'ipip6' or 'ip6ip6', the -6 must be passed - # to iproute2 during tunnel creation. - local ipproto='' - [ "${tunnel##mode ipip6}" != "${tunnel}" ] && ipproto='-6' - [ "${tunnel##mode ip6ip6}" != "${tunnel}" ] && ipproto='-6' - - ebegin "Creating tunnel ${IFVAR}" - ip ${ipproto} tunnel add ${tunnel} name "${IFACE}" - eend $? || return 1 - _up - fi - - # MTU support - local mtu= - eval mtu=\$mtu_${IFVAR} - [ -n "${mtu}" ] && ip link set dev "${IFACE}" mtu "${mtu}" - - # TX Queue Length support - local len= - eval len=\$txqueuelen_${IFVAR} - [ -n "${len}" ] && ip link set dev "${IFACE}" txqueuelen "${len}" - - return 0 -} - -_iproute2_ipv6_tentative() -{ - # Only check tentative when we have a carrier. - _has_carrier || return 1 - LC_ALL=C ip addr show dev "${IFACE}" | \ - grep -q "^[[:space:]]*inet6 .* tentative" -} - -iproute2_post_start() -{ - local n=5 - - # Kernel may not have IP built in - if [ -e /proc/net/route ]; then - local rules="$(_get_array "rules_${IFVAR}")" - if [ -n "${rules}" ]; then - if ! ip -4 rule list | grep -q "^"; then - eerror "IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES) needed for ip rule" - else - service_set_value "ip_rule" "${rules}" - einfo "Adding IPv4 RPDB rules" - _ip_rule_runner -4 add "${rules}" - fi - fi - ip -4 route flush table cache dev "${IFACE}" - fi - - # Kernel may not have IPv6 built in - if [ -e /proc/net/ipv6_route ]; then - local rules="$(_get_array "rules6_${IFVAR}")" - if [ -n "${rules}" ]; then - if ! ip -6 rule list | grep -q "^"; then - eerror "IPv6 Policy Routing (CONFIG_IPV6_MULTIPLE_TABLES) needed for ip rule" - else - service_set_value "ip6_rule" "${rules}" - einfo "Adding IPv6 RPDB rules" - _ip_rule_runner -6 add "${rules}" - fi - fi - ip -6 route flush table cache dev "${IFACE}" - fi - - if _iproute2_ipv6_tentative; then - ebegin "Waiting for IPv6 addresses" - while [ $n -ge 0 ]; do - _iproute2_ipv6_tentative || break - sleep 1 - : $(( n -= 1 )) - done - [ $n -ge 0 ] - eend $? - fi - - return 0 -} - -iproute2_post_stop() -{ - # Kernel may not have IP built in - if [ -e /proc/net/route ]; then - local rules="$(service_get_value "ip_rule")" - if [ -n "${rules}" ]; then - einfo "Removing IPv4 RPDB rules" - _ip_rule_runner -4 del "${rules}" - fi - - # Only do something if the interface actually exist - if _exists; then - ip -4 route flush table cache dev "${IFACE}" - fi - fi - - # Kernel may not have IPv6 built in - if [ -e /proc/net/ipv6_route ]; then - local rules="$(service_get_value "ip6_rule")" - if [ -n "${rules}" ]; then - einfo "Removing IPv6 RPDB rules" - _ip_rule_runner -6 del "${rules}" - fi - - # Only do something if the interface actually exist - if _exists; then - ip -6 route flush table cache dev "${IFACE}" - fi - fi - - # Don't delete sit0 as it's a special tunnel - if [ "${IFACE}" != "sit0" ]; then - if [ -n "$(ip tunnel show "${IFACE}" 2>/dev/null)" ]; then - ebegin "Destroying tunnel ${IFACE}" - ip tunnel del "${IFACE}" - eend $? - fi - fi -} - -# Is the interface administratively/operationally up? -# The 'UP' status in ifconfig/iproute2 is the administrative status -# Operational state is available in iproute2 output as 'state UP', or the -# operstate sysfs variable. -# 0: up -# 1: down -# 2: invalid arguments -is_admin_up() -{ - local iface="$1" - [ -z "$iface" ] && iface="$IFACE" - ip link show dev $iface | \ - sed -n '1,1{ /[<,]UP[,>]/{ q 0 }}; q 1; ' -} - -is_oper_up() -{ - local iface="$1" - [ -z "$iface" ] && iface="$IFACE" - read state -# Released under the 2-clause BSD license. - -_config_vars="$_config_vars ssid mode associate_timeout preferred_aps" -_config_vars="$_config_vars blacklist_aps" - -iwconfig_depend() -{ - program /sbin/ifconfig - after plug - before interface - provide wireless -} - -iwconfig_get_wep_status() -{ - local status="disabled" - local mode=$(LC_ALL=C ifconfig "${IFACE}" \ - | sed -n -e 's/^[[:space:]]*authmode \([^ ]*\) privacy ON .*/\1/p') - if [ -n "${mode}" ] ; then - status="enabled - ${mode}" - fi - - echo "(WEP ${status})" -} - -_iwconfig_get() -{ - LC_ALL=C ifconfig "${IFACE}" | \ - sed -n -e "s/^[[:space:]]*ssid \(.*\) channel \([0-9]*\).* bssid \(..:..:..:..:..:..\)\$/\\$1/p" -} - -_get_ssid() -{ - local ssid="$(_iwconfig_get 1)" - # If the ssid has a space then it's wrapped in quotes. This is a - # problem if the real ssid has a quote at the start or the end :/ - ssid=${ssid#\"} - ssid=${ssid%\"} - echo "${ssid}" -} - -_get_ap_mac_address() -{ - _iwconfig_get 3 -} - -_get_channel() -{ - _iwconfig_get 2 -} - -iwconfig_report() -{ - local m="connected to" - local ssid="$(_get_ssid)" - local mac="$(_get_ap_mac_address "${iface}")" - [ -n "${mac}" ] && mac=" at ${mac}" - local wep_status="$(iwconfig_get_wep_status "${iface}")" - local channel="$(_get_channel)" - [ -n "${channel}" ] && channel="on channel ${channel} " - - eindent - einfo "${IFACE} ${m} \"${ssid}\"${mac}" - einfo "${channel}${wep_status}" - eoutdent -} - -iwconfig_get_wep_key() -{ - local mac="$1" key= - [ -n "${mac}" ] && mac="$(echo "${mac}" | sed -e 's/://g')" - eval key=\$mac_key_${mac} - [ -z "${key}" ] && eval key=\$key_${SSIDVAR} - echo "${key:--}" -} - -iwconfig_user_config() -{ - local conf= - eval set -- \$ifconfig_${SSIDVAR} - for conf in "$@" ; do - ifconfig "${IFACE}" ${conf} - done -} - -iwconfig_set_mode() -{ - local x= opt= unopt="hostap adhoc" - case "$1" in - master|hostap) unopt="adhoc" opt="hostap" ;; - ad-hoc|adhoc) unopt="hostap" opt="adhoc" ;; - esac - for x in ${unopt} ; do - ifconfig "${IFACE}" -mediaopt ${x} - done - for x in ${opt} ; do - ifconfig "${IFACE}" mediaopt ${x} - done -} - -iwconfig_setup_specific() -{ - local mode="${1:-master}" channel= - if [ -z "${SSID}" ]; then - eerror "${IFACE} requires an SSID to be set to operate in ${mode} mode" - eerror "adjust the ssid_${IFVAR} setting in /etc/conf.d/net" - return 1 - fi - - iwconfig_set_mode "${mode}" || return 1 - - SSIDVAR=$(shell_var "${SSID}") - local key=$(iwconfig_get_wep_key) - - # Now set the key - ifconfig "${IFACE}" wepkey "${key}" - - ifconfig "${IFACE}" ssid "${SSID}" || return 1 - - eval channel=\$channel_${IFVAR} - # We default the channel to 3 - ifconfig "${IFACE}" channel "${channel:-3}" || return 1 - - iwconfig_user_config - iwconfig_report "${iface}" - return 0 -} - -iwconfig_associate() -{ - local mac="$1" channel="$2" caps="$3" - local mode= w="(WEP Disabled)" key= - - SSIDVAR=$(shell_var "${SSID}") - key=$(iwconfig_get_wep_key "${mac}") - case "${caps}" in - [EI]P*) - if [ "${key}" = "-" ] ; then - ewarn "WEP key is not set for \"${SSID}\"" - return 1 - fi - ;; - "") ;; - *) - if [ "${key}" != "-" ] ; then - key="-" - ewarn "\"${SSID}\" is not WEP enabled" - fi - ;; - esac - - # Set mode accordingly - case "${caps}" in - *E*) - mode="managed" - if LC_ALL=C ifconfig "${IFACE}" | \ - grep -q "^[[:space:]]*media: .*adhoc" ; then - ifconfig "${IFACE}" down -mediaopt adhoc up - fi - ;; - *I*) - mode="adhoc" - if ! LC_ALL=C ifconfig "${IFACE}" | \ - grep -q "^[[:space:]]*media: .*adhoc" ; then - ifconfig "${IFACE}" down mediaopt adhoc up - fi - ;; - *) - if LC_ALL=C ifconfig "${IFACE}" \ - | grep -q "^[[:space:]]*media: .*adhoc" ; then - mode="adhoc" - else - mode="managed" - fi - ;; - esac - - if [ "${key}" = "-" ] ; then - ifconfig "${IFACE}" wepmode off - else - ifconfig "${IFACE}" wepmode on - ifconfig "${IFACE}" deftxkey 1 - w=$(iwconfig_get_wep_status) - fi - - ebegin "Connecting to \"${SSID}\" in ${mode} mode ${w}" - - if ! ifconfig "${IFACE}" wepkey "${key}" ; then - eerror "Invalid WEP key ${key}" - return 1 - fi - - ifconfig "${IFACE}" ssid "${SSID}" || return 1 - iwconfig_user_config - - if [ "${SSID}" != "any" ] && type preassociate >/dev/null 2>/dev/null ; then - veinfo "Running preassociate function" - veindent - ( preassociate ) - local e=$? - veoutdent - if [ ${e} -eq 0 ] ; then - veend 1 "preassociate \"${SSID}\" on ${IFACE} failed" - return 1 - fi - fi - - local timeout= i=0 - eval timeout=\$associate_timeout_${IFVAR} - timeout=${timeout:-10} - - [ ${timeout} -eq 0 ] \ - && vewarn "WARNING: infinite timeout set for association on ${IFACE}" - - while true; do - _has_carrier && break - sleep 1 - - [ ${timeout} -eq 0 ] && continue - : $(( i += 1 )) - [ ${i} -ge ${timeout} ] && { eend 1; return 1; } - done - - _has_carrier || { eend 1; return 1; } - eend 0 - - if [ "${SSID}" = "any" ]; then - SSID="$(_get_ssid)" - iwconfig_associate - return $? - fi - - iwconfig_report - - if type postassociate >/dev/null 2>/dev/null ; then - veinfo "Running postassociate function" - veindent - ( postassociate ) - veoutdent - fi - - return 0 -} - -iwconfig_scan() -{ - local x= i=0 scan= quality= - einfo "Scanning for access points" - eindent - - scan="$(LC_ALL=C ifconfig -v "${IFACE}" list scan 2>/dev/null | sed -e "1 d" -e "s/$/'/g" -e "s/^/'/g")" - while [ ${i} -lt 3 -a -z "${scan}" ] ; do - scan="${scan}${scan:+ }$(LC_ALL=C ifconfig -v "${IFACE}" scan 2>/dev/null | sed -e "1 d" -e "s/$/'/g" -e "s/^/'/g")" - : $(( i += 1 )) - done - - APS=-1 - eval set -- ${scan} - for line in "$@" ; do - : $(( APS += 1 )) - set -- ${line} - while true ; do - case "$1" in - *:*:*:*:*:*) break ;; - esac - eval SSID_${APS}="\"\${SSID_${APS}}\${SSID_${APS}:+ }$1\"" - shift - done - eval MAC_${APS}="$(echo "$1" | tr '[:lower:]' '[:upper:]')" - eval CHAN_${APS}="$2" - quality=${4%:*} - shift ; shift ; shift ; shift ; shift - eval CAPS_${APS}="\"$*\"" - - # Add 1000 for managed nodes as we prefer them to adhoc - set -- $* - case "$1" in - *E*) eval QUAL_${APS}=$(( quality + 1000 )) ;; - *) eval QUAL_${APS}=\$quality ;; - esac - done - - if [ -z "${MAC_0}" ]; then - ewarn "no access points found" - eoutdent - return 1 - fi - - # Sort based on quality - local i=0 k=1 a= b= x= t= - while [ ${i} -lt ${APS} ] ; do - : $(( k = i + 1 )) - while [ ${k} -le ${APS} ] ; do - eval a=\$QUALITY_${i} - [ -z "${a}" ] && break - eval b=\$QUALITY_${k} - if [ -n "${b}" -a "${a}" -lt "${b}" ] ; then - for x in MAC SSID CHAN QUALITY CAPS ; do - eval t=\$${x}_${i} - eval ${x}_${i}=\$${x}_${k} - eval ${x}_${k}=\$t - done - fi - : $(( k += 1 )) - done - : $(( i += 1 )) - done - - # Strip any duplicates - local i=0 k=1 a= b= - while [ ${i} -lt ${APS} ] ; do - : $(( k = i + 1 )) - while [ ${k} -le ${APS} ] ; do - eval a=\$MAC_${i} - eval b=\$MAC_${k} - if [ "${a}" = "${b}" ] ; then - eval a=\$QUALITY_${i} - eval b=\$QUALITY_${k} - if [ -n "${a}" -a -n "${b}" ] ; then - if [ ${a} -ge ${b} ] ; then - unset MAC_${k} SSID_${k} CHAN_${k} QUALITY_${k} CAPS_${k} - else - unset MAC_${i} SSID_${i} CHAN_${i} QUALITY_${i} CAPS_${i} - fi - else - unset MAC_${k} SSID_${k} CHAN_${k} QUALITY_${k} CAPS_${k} - fi - fi - : $(( k += 1 )) - done - : $(( i += 1 )) - done - - local i=0 e= m= s= - - while [ ${i} -le ${APS} ] ; do - eval x=\$MAC_${i} - if [ -z "${x}" ] ; then - : $(( i += 1 )) - continue - fi - - eval m=\$MODE_${i} - [ -n "${m}" ] && m=", ${m}" - eval s=\$SSID_${i} - eval q=\$QUALITY_${i} - eval e=\$CAPS_${i} - case "${e}" in - [EI]P*) e=", encrypted" ;; - *) e="" ;; - esac - if [ -z "${s}" ] ; then - einfo "Found ${x}${m}${e}" - else - einfo "Found \"${s}\" at ${x}${m}${e}" - fi - - x="$(echo "${x}" | sed -e 's/://g')" - eval x=\$mac_ssid_${x} - if [ -n "${x}" ] ; then - eval SSID_${i}=\$x - s=${x} - eindent - einfo "mapping to \"${x}\"" - eoutdent - fi - - eval set -- $(_flatten_array "blacklist_aps_${IFVAR}") - [ $# = 0 ] && eval set -- $(_flatten_array "blacklist_aps") - for x; do - if [ "${x}" = "${s}" ] ; then - ewarn "${s} has been blacklisted - not connecting" - unset SSID_${i} MAC_${i} CHAN_${i} QUALITY_${i} CAPS_${i} - fi - done - : $(( i += 1 )) - done - eoutdent - return 0 -} - -iwconfig_force_preferred() -{ - eval set -- $(_flatten_array "preferred_aps_${IFVAR}") - [ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps") - [ $# = 0 ] && return 1 - - ewarn "Trying to force preferred in case they are hidden" - local ssid= - for ssid; do - local found_AP=false i=0 e= - while [ ${i} -le ${APS:--1} ] ; do - eval e=\$SSID_${i} - if [ "${e}" = "${ssid}" ] ; then - found_AP=true - break - fi - : $(( i += 1 )) - done - if ! ${found_AP} ; then - SSID=${ssid} - iwconfig_associate && return 0 - fi - done - - ewarn "Failed to associate with any preferred access points on ${IFACE}" - return 1 -} - -iwconfig_connect_preferred() -{ - eval set -- $(_flatten_array "preferred_aps_${IFVAR}") - [ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps") - [ $# = 0 ] && return 1 - - local ssid= i= mode= mac= caps= freq= chan= - for ssid; do - i=0 - while [ ${i} -le ${APS} ] ; do - eval e=\$SSID_${i} - if [ "${e}" = "${ssid}" ] ; then - SSID=${e} - eval mac=\$MAC_${i} - eval caps=\$CAPS_${i} - eval freq=\$FREQ_${i} - eval chan=\$CHAN_${i} - iwconfig_associate "${mac}" \ - "${chan}" "${caps}" && return 0 - fi - : $(( i += 1 )) - done - done - - return 1 -} - -iwconfig_connect_not_preferred() -{ - local ssid= i=0 mode= mac= caps= freq= chan= pref= - - while [ ${i} -le ${APS} ] ; do - eval e=\$SSID_${i} - if [ -z "${e}" ] ; then - : $(( i += 1 )) - continue - fi - - eval set -- $(_flatten_array "preferred_aps_${IFVAR}") - [ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps") - pref=false - for ssid; do - if [ "${e}" = "${ssid}" ] ; then - pref=true - break - fi - done - - if ! ${pref} ; then - SSID=${e} - eval mac=\$MAC_${i} - eval caps=\$CAPS_${i} - eval freq=\$FREQ_${i} - eval chan=\$CHAN_${i} - iwconfig_associate "${mac}" \ - "${chan}" "${caps}" && return 0 - fi - : $(( i += 1 )) - done - - return 1 -} - -iwconfig_defaults() -{ - # Set some defaults - #ifconfig "${iface}" txpower 100 2>/dev/null - ifconfig "${IFACE}" bssid - - ifconfig "${IFACE}" ssid - - ifconfig "${IFACE}" wepkey 1:- wepkey 2:- wepkey 3:- wepkey 4:- - ifconfig "${IFACE}" authmode open - ifconfig "${IFACE}" -mediaopt adhoc - ifconfig "${IFACE}" -mediaopt hostap -} - -iwconfig_configure() -{ - local x= APS=-1 - eval SSID=\$ssid_${IFVAR} - - # Setup ad-hoc mode? - eval x=\$mode_${IFVAR} - x=${x:-managed} - case "${x}" in - ad-hoc|adhoc|hostap|master) iwconfig_setup_specific "${x}" ;; - esac - - if [ "${x}" != "managed" -a "${x}" != "auto" -a "${x}" != "ad-hoc" -a "${x}" != "adhoc" -a ${x} != "master" ] ; then - eerror "Only managed, ad-hoc, master and auto modes are supported" - return 1 - fi - - # Has an SSID been forced? - if [ -n "${SSID}" ]; then - iwconfig_set_mode "${x}" - iwconfig_associate && return 0 - [ "${SSID}" = "any" ] && iwconfig_force_preferred && return 0 - - eval SSID=\$adhoc_ssid_${IFVAR} - if [ -n "${SSID}" ]; then - iwconfig_setup_specific adhoc - return $? - fi - return 1 - fi - - # Are we forcing preferred only? - eval x=\$associate_order_${IFVAR} - [ -n "${x}" ] && associate_order=${x} - associate_order=${associate_order:-any} - if [ "${associate_order}" = "forcepreferredonly" ]; then - iwconfig_force_preferred && return 0 - else - iwconfig_scan || return 1 - iwconfig_connect_preferred && return 0 - [ "${associate_order}" = "forcepreferred" ] || \ - [ "${associate_order}" = "forceany" ] && \ - iwconfig_force_preferred && return 0 - [ "${associate_order}" = "any" ] || \ - [ "${associate_order}" = "forceany" ] && \ - iwconfig_connect_not_preferred && return 0 - fi - - e="associate with" - [ -z "${MAC_0}" ] && e="find" - [ "${preferred_aps}" = "force" ] || \ - [ "${preferred_aps}" = "forceonly" ] && \ - e="force" - e="Couldn't ${e} any access points on ${IFACE}" - - eval SSID=\$adhoc_ssid_${IFVAR} - if [ -n "${SSID}" ]; then - ewarn "${e}" - iwconfig_setup_specific adhoc - return $? - fi - - eerror "${e}" - return 1 -} - -iwconfig_pre_start() -{ - # We don't configure wireless if we're being called from - # the background - yesno ${IN_BACKGROUND} && return 0 - - service_set_value "SSID" "" - _exists || return 0 - - if ! _is_wireless ; then - veinfo "${IFACE} is not wireless" - return 0 - fi - - iwconfig_defaults - iwconfig_user_config - - # Set the base metric to be 2000 - metric=2000 - - einfo "Configuring wireless network for ${IFACE}" - - if iwconfig_configure ; then - service_set_value "SSID" "${SSID}" - return 0 - fi - - eerror "Failed to configure wireless for ${IFACE}" - iwconfig_defaults - #iwconfig "${IFACE}" txpower 0 2>/dev/null - unset SSID SSIDVAR - _down - return 1 -} - -iwconfig_post_stop() -{ - yesno ${IN_BACKGROUND} && return 0 - _is_wireless || return 0 - iwconfig_defaults - #iwconfig "${IFACE}" txpower 0 2>/dev/null -} diff --git a/net/iwconfig.sh.Linux.in b/net/iwconfig.sh.Linux.in deleted file mode 100644 index 293bc1f3..00000000 --- a/net/iwconfig.sh.Linux.in +++ /dev/null @@ -1,763 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -_config_vars="$_config_vars ssid mode associate_timeout sleep_scan" -_config_vars="$_config_vars preferred_aps blacklist_aps" - -iwconfig_depend() -{ - program /sbin/iwconfig - after plug - before interface - provide wireless -} - -iwconfig_get_wep_status() -{ - local mode= status="disabled" - - # No easy way of doing this grep in bash regex :/ - if LC_ALL=C iwconfig "${IFACE}" | \ - grep -qE "^ +Encryption key:[*0-9,A-F]"; then - status="enabled" - mode=$(LC_ALL=C iwconfig "${IFACE}" | \ - sed -n -e 's/^.*Security mode:\(.*[^ ]\).*/\1/p') - [ -n "${mode}" ] && mode=" - ${mode}" - fi - - echo "(WEP ${status}${mode})" -} - -_get_ssid() -{ - local i=5 ssid= - - while [ ${i} -gt 0 ]; do - ssid=$(iwgetid --raw "${IFACE}") - if [ -n "${ssid}" ]; then - echo "${ssid}" - return 0 - fi - sleep 1 - : $(( i -= 1 )) - done - - return 1 -} - -_get_ap_mac_address() -{ - local mac="$(iwgetid --raw --ap "${IFACE}")" - case "${mac}" in - "00:00:00:00:00:00") return 1;; - "44:44:44:44:44:44") return 1;; - "FF:00:00:00:00:00") return 1;; - "FF:FF:FF:FF:FF:FF") return 1;; - *) echo "${mac}";; - esac -} - -iwconfig_get_mode() -{ - LC_ALL=C iwgetid --mode "${IFACE}" | \ - sed -n -e 's/^.*Mode:\(.*\)/\1/p' | \ - tr '[:upper:]' '[:lower:]' -} - -iwconfig_set_mode() -{ - local mode="$1" - [ "${mode}" = "$(iwconfig_get_mode)" ] && return 0 - - # Devicescape stack requires the interface to be down - _down - iwconfig "${IFACE}" mode "${mode}" || return 1 - _up -} - -iwconfig_get_type() -{ - LC_ALL=C iwconfig "${IFACE}" | \ - sed -n -e 's/^'"$1"' *\([^ ]* [^ ]*\).*/\1/p' -} - -iwconfig_report() -{ - local mac= m="connected to" - local ssid="$(_get_ssid)" - local wep_status="$(iwconfig_get_wep_status)" - local channel="$(iwgetid --raw --channel "${iface}")" - [ -n "${channel}" ] && channel="on channel ${channel} " - local mode="$(iwconfig_get_mode)" - if [ "${mode}" = "master" ]; then - m="configured as" - else - mac="$(_get_ap_mac_address)" - [ -n "${mac}" ] && mac=" at ${mac}" - fi - - eindent - einfo "${IFACE} ${m} SSID \"${SSID}\"${mac}" - einfo "in ${mode} mode ${channel}${wep_status}" - eoutdent -} - -iwconfig_get_wep_key() -{ - local mac="$1" key= - [ -n "${mac}" ] && mac="$(echo "${mac}" | sed -e 's/://g')" - eval key=\$mac_key_${mac} - [ -z "${key}" ] && eval key=\$key_${SSIDVAR} - if [ -z "${key}" ]; then - echo "off" - else - set -- ${key} - local x= e=false - for x; do - if [ "${x}" = "enc" ]; then - e=true - break - fi - done - ${e} || key="${key} enc open" - echo "${key}" - fi -} - -iwconfig_user_config() -{ - local conf= var=${SSIDVAR} config= - [ -z "${var}" ] && var=${IFVAR} - - config="$(_get_array "iwconfig_${var}")" - local IFS="$__IFS" - for conf in ${config}; do - unset IFS - if ! eval iwconfig "${IFACE}" "${conf}"; then - ewarn "${IFACE} does not support the following configuration commands" - ewarn " ${conf}" - fi - done - unset IFS - - config="$(_get_array "iwpriv_${var}")" - local IFS="$__IFS" - for conf in ${config}; do - unset IFS - if ! eval iwpriv "${IFACE}" "${conf}"; then - ewarn "${IFACE} does not support the following private ioctls" - ewarn " ${conf}" - fi - done -} - -iwconfig_setup_specific() -{ - local mode="$1" channel= - if [ -z "${SSID}" ]; then - eerror "${IFACE} requires an SSID to be set to operate in ${mode} mode" - eerror "adjust the ssid_${IFVAR} setting in /etc/conf.d/net" - return 1 - fi - SSIDVAR=$(shell_var "${SSID}") - local key=$(iwconfig_get_wep_key) - - iwconfig_set_mode "${mode}" - - # Now set the key - if ! eval iwconfig "${IFACE}" key "${key}"; then - if [ "${key}" != "off" ]; then - ewarn "${IFACE} does not support setting keys" - ewarn "or the parameter \"mac_key_${SSIDVAR}\" or \"key_${SSIDVAR}\" is incorrect" - fi - fi - - # Then set the SSID - if ! iwconfig "${IFACE}" essid "${SSID}"; then - eerror "${IFACE} does not support setting SSID to \"${SSID}\"" - return 1 - fi - - eval channel=\$channel_${SSIDVAR} - [ -z "${channel}" ] && eval channel=\$channel_${IFVAR} - # We default the channel to 3 - if ! iwconfig "${IFACE}" channel "${channel:-3}"; then - ewarn "${IFACE} does not support setting the channel to \"${channel:-3}\"" - return 1 - fi - - # Finally apply the user Config - iwconfig_user_config - - iwconfig_report - return 0 -} - -iwconfig_wait_for_association() -{ - local timeout= i=0 - eval timeout=\$associate_timeout_${IFVAR} - timeout=${timeout:-10} - - [ ${timeout} -eq 0 ] \ - && vewarn "WARNING: infinite timeout set for association on ${IFACE}" - - while true; do - # Use sysfs if we can - if [ -e /sys/class/net/"${IFACE}"/carrier ]; then - if [ "$(cat /sys/class/net/"${IFACE}"/carrier)" = "1" ]; then - # Double check we have an ssid and a non-zero - # mac address. This is mainly for buggy - # prism54 drivers that always set their - # carrier on or buggy madwifi drivers that - # sometimes have carrier on and ssid set - # without being associated. :/ - [ -n "$(iwgetid --raw "${IFACE}")" ] && [ "$(iwgetid --ap --raw "${IFACE}")" != "00:00:00:00:00:00" ] && return 0 - fi - else - local atest= - eval atest=\$associate_test_${IFVAR} - atest=${atest:-mac} - if [ "${atest}" = "mac" -o "${atest}" = "all" ]; then - [ -n "$(_get_ap_mac_address)" ] && return 0 - fi - if [ "${atest}" = "quality" -o "${atest}" = "all" ]; then - [ "$(sed -n -e 's/^.*'"${IFACE}"': *[0-9]* *\([0-9]*\).*/\1/p' \ - /proc/net/wireless)" != "0" ] && return 0 - fi - fi - - sleep 1 - [ ${timeout} -eq 0 ] && continue - : $(( i += 1 )) - [ ${i} -ge ${timeout} ] && return 1 - done - return 1 -} - -iwconfig_associate() -{ - local mode="${1:-managed}" mac="$2" wep_required="$3" - local freq="$4" chan="$5" - local w="(WEP Disabled)" key= - - iwconfig_set_mode "${mode}" - - if [ "${SSID}" = "any" ]; then - iwconfig "${IFACE}" ap any 2>/dev/null - unset SSIDVAR - else - SSIDVAR=$(shell_var "${SSID}") - key="$(iwconfig_get_wep_key "${mac}")" - if [ "${wep_required}" = "on" -a "${key}" = "off" ]; then - ewarn "WEP key is not set for \"${SSID}\"" - return 1 - fi - if [ "${wep_required}" = "off" -a "${key}" != "off" ]; then - key="off" - ewarn "\"${SSID}\" is not WEP enabled" - fi - - if ! eval iwconfig "${IFACE}" key "${key}"; then - if [ "${key}" != "off" ]; then - ewarn "${IFACE} does not support setting keys" - ewarn "or the parameter \"mac_key_${SSIDVAR}\" or \"key_${SSIDVAR}\" is incorrect" - return 1 - fi - fi - [ "${key}" != "off" ] && w="$(iwconfig_get_wep_status "${iface}")" - fi - - if ! iwconfig "${IFACE}" essid "${SSID}"; then - if [ "${SSID}" != "any" ]; then - ewarn "${IFACE} does not support setting SSID to \"${SSID}\"" - fi - fi - - # Only use channel or frequency - if [ -n "${chan}" ]; then - iwconfig "${IFACE}" channel "${chan}" - elif [ -n "${freq}" ]; then - iwconfig "${IFACE}" freq "${freq}" - fi - [ -n "${mac}" ] && iwconfig "${IFACE}" ap "${mac}" - - # Finally apply the user Config - iwconfig_user_config - - ebegin "Connecting to \"${SSID}\" in ${mode} mode ${w}" - - if [ "${SSID}" != "any" ] && type preassociate >/dev/null 2>&1; then - veinfo "Running preassociate function" - veindent - ( preassociate ) - local e=$? - veoutdent - if [ ${e} -eq 0 ]; then - veend 1 "preassociate \"${SSID}\" on ${IFACE} failed" - return 1 - fi - fi - - if ! iwconfig_wait_for_association; then - eend 1 - return 1 - fi - eend 0 - - if [ "${SSID}" = "any" ]; then - SSID="$(_get_ssid)" - iwconfig_associate - return $? - fi - - iwconfig_report - - if type postassociate >/dev/null 2>&1; then - veinfo "Running postassociate function" - veindent - ( postassociate ) - veoutdent - fi - - return 0 -} - -iwconfig_scan() -{ - local x= i=0 scan= - einfo "Scanning for access points" - eindent - - # Sleep if required - eval x=\$sleep_scan_${IFVAR} - [ -n "${x}" ] && sleep "${x}" - - while [ ${i} -lt 3 ]; do - local scan="${scan}${scan:+ }$(LC_ALL=C iwlist "${IFACE}" scan 2>/dev/null | sed -e "s/'/'\\\\''/g" -e "s/$/'/g" -e "s/^/'/g")" - # If this is the first pass and txpower as off and we have no - # results then we need to wait for at least 2 seconds whilst - # the interface does an initial scan. - if [ "${i}" = "0" -a "${txpowerwasoff}" = "0" ]; then - case "${scan}" in - "'${IFACE} "*"No scan results"*) - sleep 2 - txpowerwasoff=1 - continue - ;; - esac - fi - : $(( i += 1 )) - done - - if [ -z "${scan}" ]; then - ewarn "${iface} does not support scanning" - eoutdent - eval x=\$adhoc_ssid_${IFVAR} - [ -n "${x}" ] && return 0 - if [ -n "${preferred_aps}" ]; then - [ "${associate_order}" = "forcepreferred" ] || \ - [ "${associate_order}" = "forcepreferredonly" ] && return 0 - fi - eerror "You either need to set a preferred_aps list in /etc/conf.d/wireless" - eerror " preferred_aps=\"SSID1 SSID2\"" - eerror " and set associate_order_${IFVAR}=\"forcepreferred\"" - eerror " or set associate_order_${IFVAR}=\"forcepreferredonly\"" - eerror "or hardcode the SSID to \"any\" and let the driver find an Access Point" - eerror " ssid_${IFVAR}=\"any\"" - eerror "or configure defaulting to Ad-Hoc when Managed fails" - eerror " adhoc_ssid_${IFVAR}=\"WLAN\"" - eerror "or hardcode the SSID against the interface (not recommended)" - eerror " ssid_${IFVAR}=\"SSID\"" - return 1 - fi - - APS=-1 - eval set -- ${scan} - for line; do - case "${line}" in - *Address:*) - : $(( APS += 1 )) - eval MAC_${APS}="\""$(echo "${line#*: }" | tr '[:lower:]' '[:upper:]')"\"" - eval QUALITY_${APS}=0 - ;; - *ESSID:*) - x=${line#*\"} - x=${x%*\"} - eval SSID_${APS}=\$x - ;; - *Mode:*) - x="$(echo "${line#*:}" | tr '[:upper:]' '[:lower:]')" - if [ "${x}" = "master" ]; then - eval MODE_${APS}=managed - else - eval MODE_${APS}=\$x - fi - ;; - *'Encryption key:'*) - x=${line#*:} - eval ENC_${APS}=\$x - ;; - #*Frequency:*) - # freq[i]="${line#*:}" - # x="${freq[i]#* }" - # freq[i]="${freq[i]%% *}${x:0:1}" - # ;; - *Channel:*) - x=${line#*:} - x=${x%% *} - eval CHAN_${APS}=\$x - ;; - *Quality*) - x=${line#*:} - x=${x%/*} - x="$(echo "${x}" | sed -e 's/[^[:digit:]]//g')" - x=${x:-0} - eval QUALITY_${APS}=\$x - ;; - esac - done - - if [ -z "${MAC_0}" ]; then - ewarn "no access points found" - eoutdent - return 1 - fi - - # Sort based on quality - local i=0 k=1 a= b= x= t= - while [ ${i} -lt ${APS} ]; do - : $(( k = i + 1 )) - while [ ${k} -le ${APS} ]; do - eval a=\$QUALITY_${i} - [ -z "${a}" ] && break - eval b=\$QUALITY_${k} - if [ -n "${b}" -a "${a}" -lt "${b}" ]; then - for x in MAC SSID MODE CHAN QUALITY ENC; do - eval t=\$${x}_${i} - eval ${x}_${i}=\$${x}_${k} - eval ${x}_${k}=\$t - done - fi - : $(( k += 1 )) - done - : $(( i += 1 )) - done - - # Strip any duplicates - local i=0 k=1 a= b= - while [ ${i} -lt ${APS} ]; do - : $(( k = i + 1 )) - while [ ${k} -le ${APS} ]; do - eval a=\$MAC_${i} - eval b=\$MAC_${k} - if [ "${a}" = "${b}" ]; then - eval a=\$QUALITY_${i} - eval b=\$QUALITY_${k} - local u=${k} - # We need to split this into two tests, otherwise bash errors - [ -n "${a}" -a -n "${b}" ] && [ "${a}" -lt "${b}" ] && u=${i} - unset MAC_${u} SSID_${u} MODE_${u} CHAN_${u} QUALITY_${u} ENC_${u} - fi - : $(( k += 1 )) - done - : $(( i += 1 )) - done - - local i=0 e= m= s= - - while [ ${i} -le ${APS} ]; do - eval x=\$MAC_${i} - if [ -z "${x}" ]; then - : $(( i += 1 )) - continue - fi - - eval m=\$MODE_${i} - eval s=\$SSID_${i} - eval q=\$QUALITY_${i} - eval e=\$ENC_${i} - if [ -n "${e}" -a "${e}" != "off" ]; then - e=", encrypted" - else - e="" - fi - if [ -z "${s}" ]; then - einfo "Found ${x}, ${m}${e}" - else - einfo "Found \"${s}\" at ${x}, ${m}${e}" - fi - - x="$(echo "${x}" | sed -e 's/://g')" - eval x=\$mac_ssid_${x} - if [ -n "${x}" ]; then - eval SSID_${i}=\$x - s=${x} - eindent - einfo "mapping to \"${x}\"" - eoutdent - fi - - eval set -- $(_flatten_array "blacklist_aps_${IFVAR}") - [ $# = 0 ] && eval set -- $(_flatten_array "blacklist_aps") - for x; do - if [ "${x}" = "${s}" ]; then - ewarn "${s} has been blacklisted - not connecting" - unset SSID_${i} MAC_${i} ${MODE}_${i} CHAN_${i} QUALITY_${i} ENC_${i} - fi - done - : $(( i += 1 )) - done - eoutdent -} - -iwconfig_force_preferred() -{ - eval set -- $(_flatten_array "preferred_aps_${IFVAR}") - [ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps") - [ $# = 0 ] && return 1 - - ewarn "Trying to force preferred in case they are hidden" - for ssid; do - local found_AP=false i=0 e= - while [ ${i} -le ${APS} ]; do - eval e=\$SSID_${i} - if [ "${e}" = "${ssid}" ]; then - found_AP=true - break - fi - : $(( i += 1 )) - done - if ! ${found_AP}; then - SSID=${ssid} - iwconfig_associate && return 0 - fi - done - - ewarn "Failed to associate with any preferred access points on ${IFACE}" - return 1 -} - -iwconfig_connect_preferred() -{ - local ssid= i= mode= mac= enc= freq= chan= - eval set -- $(_flatten_array "preferred_aps_${IFVAR}") - [ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps") - - for ssid; do - unset IFS - i=0 - while [ ${i} -le ${APS} ]; do - eval e=\$SSID_${i} - if [ "${e}" = "${ssid}" ]; then - SSID=${e} - eval mode=\$MODE_${i} - eval mac=\$MAC_${i} - eval enc=\$ENC_${i} - eval freq=\$FREQ_${i} - eval chan=\$CHAN_${i} - iwconfig_associate "${mode}" "${mac}" "${enc}" "${freq}" \ - "${chan}" && return 0 - fi - : $(( i += 1 )) - done - done - - return 1 -} - -iwconfig_connect_not_preferred() -{ - local ssid= i=0 mode= mac= enc= freq= chan= pref=false - - while [ ${i} -le ${APS} ]; do - eval e=\$SSID_${i} - if [ -n "${e}" ]; then - eval set -- $(_flatten_array "preferred_aps_${IFVAR}") - [ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps") - for ssid; do - if [ "${e}" = "${ssid}" ]; then - pref=true - break - fi - done - - if ! ${pref}; then - SSID=${e} - eval mode=\$MODE_${i} - eval mac=\$MAC_${i} - eval enc=\$ENC_${i} - eval freq=\$FREQ_${i} - eval chan=\$CHAN_${i} - iwconfig_associate "${mode}" "${mac}" "${enc}" "${freq}" \ - "${chan}" && return 0 - fi - fi - : $(( i += 1 )) - done - - return 1 -} - -iwconfig_defaults() -{ - # Turn on the radio - iwconfig "${IFACE}" txpower on 2>/dev/null - - # Release the AP forced - # Must do ap and then ssid otherwise scanning borks - iwconfig "${IFACE}" ap off 2>/dev/null - iwconfig "${IFACE}" essid off 2>/dev/null -} - -iwconfig_configure() -{ - local x= APS=-1 - eval SSID=\$ssid_${IFVAR} - - # Support old variable - [ -z "${SSID}" ] && eval SSID=\$essid_${IFVAR} - - # Setup ad-hoc mode? - eval x=\$mode_${IFVAR} - x=${x:-managed} - if [ "${x}" = "ad-hoc" -o "${x}" = "master" ]; then - iwconfig_setup_specific "${x}" - return $? - fi - - if [ "${x}" != "managed" -a "${x}" != "auto" ]; then - eerror "Only managed, ad-hoc, master and auto modes are supported" - return 1 - fi - - # Has an SSID been forced? - if [ -n "${SSID}" ]; then - iwconfig_set_mode "${x}" - iwconfig_associate && return 0 - [ "${SSID}" = "any" ] && iwconfig_force_preferred && return 0 - - eval SSID=\$adhoc_ssid_${IFVAR} - if [ -n "${SSID}" ]; then - iwconfig_setup_specific ad-hoc - return $? - fi - return 1 - fi - - eval x=\$preferred_aps_${IFVAR} - [ -n "${x}" ] && preferred_aps=${x} - - eval x=\$blacklist_aps_${IFVAR} - [ -n "${x}" ] && blacklist_aps=${x} - - eval x=\$associate_order_${IFVAR} - [ -n "${x}" ] && associate_order=${x} - associate_order=${associate_order:-any} - - if [ "${associate_order}" = "forcepreferredonly" ]; then - iwconfig_force_preferred && return 0 - else - iwconfig_scan || return 1 - iwconfig_connect_preferred && return 0 - [ "${associate_order}" = "forcepreferred" ] || \ - [ "${associate_order}" = "forceany" ] && \ - iwconfig_force_preferred && return 0 - [ "${associate_order}" = "any" ] || \ - [ "${associate_order}" = "forceany" ] && \ - iwconfig_connect_not_preferred && return 0 - fi - - e="associate with" - [ -z "${MAC_0}" ] && e="find" - [ "${preferred_aps}" = "force" ] || \ - [ "${preferred_aps}" = "forceonly" ] && \ - e="force" - e="Couldn't ${e} any access points on ${IFACE}" - - eval SSID=\$adhoc_ssid_${IFVAR} - if [ -n "${SSID}" ]; then - ewarn "${e}" - iwconfig_setup_specific ad-hoc - return $? - fi - - eerror "${e}" - return 1 -} - -iwconfig_pre_start() -{ - # We don't configure wireless if we're being called from - # the background - yesno ${IN_BACKGROUND} && return 0 - - service_set_value "SSID" "" - _exists || return 0 - - if ! _is_wireless; then - veinfo "Wireless extensions not found for ${IFACE}" - return 0 - fi - - # Warn about old file - we want to punt it really - if [ -e /etc/conf.d/wireless ]; then - ewarn "/etc/conf.d/wireless is deprecated" - ewarn "Please put all settings into /etc/conf.d/net" - . /etc/conf.d/wireless - fi - - # Store the fact that tx-power was off so we default to a longer - # wait if our scan returns nothing - LC_ALL=C iwconfig "${IFACE}" | sed -e '1d' | grep -q "Tx-Power=off" - local txpowerwasoff=$? - - iwconfig_defaults - iwconfig_user_config - - # Set the base metric to be 2000 - metric=2000 - - # Check for rf_kill - only ipw supports this at present, but other - # cards may in the future. - if [ -e /sys/class/net/"${IFACE}"/device/rf_kill ]; then - if [ $(cat /sys/class/net/"${IFACE}"/device/rf_kill) != "0" ]; then - eerror "Wireless radio has been killed for interface ${IFACE}" - return 1 - fi - fi - - einfo "Configuring wireless network for ${IFACE}" - - # Are we a proper IEEE device? - # Most devices reutrn IEEE 802.11b/g - but intel cards return IEEE - # in lower case and RA cards return RAPCI or similar - # which really sucks :( - # For the time being, we will test prism54 not loading firmware - # which reports NOT READY! - x="$(iwconfig_get_type)" - if [ "${x}" = "NOT READY!" ]; then - eerror "Looks like there was a problem loading the firmware for ${IFACE}" - return 1 - fi - - if iwconfig_configure; then - service_set_value "SSID" "${SSID}" - return 0 - fi - - eerror "Failed to configure wireless for ${IFACE}" - iwconfig_defaults - iwconfig "${IFACE}" txpower off 2>/dev/null - unset SSID SSIDVAR - _down - return 1 -} - -iwconfig_post_stop() -{ - yesno ${IN_BACKGROUND} && return 0 - _exists || return 0 - iwconfig_defaults - iwconfig "${IFACE}" txpower off 2>/dev/null -} diff --git a/net/macchanger.sh b/net/macchanger.sh deleted file mode 100644 index 4e535ec3..00000000 --- a/net/macchanger.sh +++ /dev/null @@ -1,92 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -macchanger_depend() -{ - before macnet - # no program 'macchanger', as we have partial functionality without it -} - -_config_vars="$_config_vars mac" - -macchanger_pre_start() -{ - # We don't change MAC addresses from background - yesno ${IN_BACKGROUND} && return 0 - - local mac= opts= - - eval mac=\$mac_${IFVAR} - [ -z "${mac}" ] && return 0 - - _exists true || return 1 - - ebegin "Changing MAC address of ${IFACE}" - - # The interface needs to be up for macchanger to work most of the time - _down - - mac=$(echo "${mac}" | tr '[:upper:]' '[:lower:]') - local hex="[0-9a-f][0-9a-f]" - case "${mac}" in - # specific mac-addr - ${hex}:${hex}:${hex}:${hex}:${hex}:${hex}) - # We don't need macchanger to change to a specific - # mac address - _set_mac_address "${mac}" - if eend "$?"; then - mac=$(_get_mac_address) - eindent - einfo "changed to ${mac}" - eoutdent - _up - return 0 - fi - ;; - - # increment MAC address, default macchanger behavior - increment) opts="${opts}";; - - # randomize just the ending bytes - random-ending) opts="${opts} -e";; - - # keep the same kind of physical layer (eg fibre, copper) - random-samekind) opts="${opts} -a";; - - # randomize to any known vendor of any physical layer type - random-anykind) opts="${opts} -A";; - - # fully random bytes - random-full|random) opts="${opts} -r";; - - # default case is just to pass on all the options - *) opts="${opts} ${mac}";; - esac - - if [ ! -x /sbin/macchanger ]; then - eerror "For changing MAC addresses, emerge net-analyzer/macchanger" - return 1 - fi - - mac=$(/sbin/macchanger ${opts} "${IFACE}" \ - | sed -n -e 's/^Faked MAC:.*\<\(..:..:..:..:..:..\)\>.*/\U\1/p' ) - _up - - # Sometimes the interface needs to be up .... - if [ -z "${mac}" ]; then - mac=$(/sbin/macchanger ${opts} "${IFACE}" \ - | sed -n -e 's/^Faked MAC:.*\<\(..:..:..:..:..:..\)\>.*/\U\1/p' ) - fi - - if [ -z "${mac}" ]; then - eend 1 "Failed to set MAC address" - return 1 - fi - - eend 0 - eindent - einfo "changed to" "${mac}" - eoutdent - - return 0 -} diff --git a/net/macnet.sh b/net/macnet.sh deleted file mode 100644 index 1ec2ad7f..00000000 --- a/net/macnet.sh +++ /dev/null @@ -1,19 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -macnet_depend() -{ - before rename interface wireless - after macchanger -} - -macnet_pre_start() -{ - local mac=$(_get_mac_address 2>/dev/null) - [ -z "${mac}" ] && return 0 - - vebegin "Configuring ${IFACE} for MAC address ${mac}" - mac=$(echo "${mac}" | sed -e 's/://g') - _configure_variables "${mac}" - veend 0 -} diff --git a/net/macvlan.sh b/net/macvlan.sh deleted file mode 100644 index 1b95f5c0..00000000 --- a/net/macvlan.sh +++ /dev/null @@ -1,53 +0,0 @@ -# 2011-09-22 Stef Simoens -# based on vlan.sh & tuntap.sh -# Copyright (c) 2007-2008 Roy Marples -# All rights reserved. Released under the 2-clause BSD license. - -macvlan_depend() -{ - program ip - after interface - before dhcp macchanger -} - -_is_macvlan() -{ - [ -n "$(RC_SVCNAME="net.${IFACE}"; export RC_SVCNAME ; service_get_value macvlan)" ] -} - -macvlan_pre_start() -{ - # MAC-VLAN needs an existing interface to link to - local macvlan= - eval macvlan=\$macvlan_${IFVAR} - [ -z "${macvlan}" ] && return 0 - - case " ${MODULES} " in - *" ifconfig "*) - eerror "sys-apps/iproute2 is required to configure MACVLANs" - return 1 ;; - esac - - # optional mode, default to "private" - local mode= - eval mode=\$mode_${IFVAR} - [ -z "${mode}" ] && mode="private" - - ebegin "Creating MAC-VLAN ${IFACE} to ${macvlan}" - e="$(ip link add link "${macvlan}" name "${IFACE}" type macvlan mode "${mode}" 2>&1 1>/dev/null)" - if [ -n "${e}" ]; then - eend 1 "${e}" - else - eend 0 && _up && service_set_value macvlan "${macvlan}" - fi -} - - -macvlan_post_stop() -{ - _is_macvlan || return 0 - - ebegin "Removing MAC-VLAN ${IFACE}" - ip link delete "${IFACE}" type macvlan >/dev/null - eend $? -} diff --git a/net/netplugd.sh b/net/netplugd.sh deleted file mode 100644 index f43a5e64..00000000 --- a/net/netplugd.sh +++ /dev/null @@ -1,96 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -_config_vars="$_config_vars plug_timeout" - -netplugd_depend() -{ - program start /sbin/netplugd - after macnet rename - before interface - provide plug - - # Prefer ifplugd - before ifplugd -} - -netplugd_pre_start() -{ - local pidfile="/var/run/netplugd-${IFACE}.pid" timeout= - - # We don't start netplug if we're being called from the background - yesno ${IN_BACKGROUND} && return 0 - - _exists || return 0 - - # We need a valid MAC address - # It's a basic test to ensure it's not a virtual interface - if ! _get_mac_address >/dev/null 2>&1; then - vewarn "netplug only works on interfaces with a valid MAC address" - return 0 - fi - - # We don't work on bonded, bridges, tun/tap, vlan or wireless - for f in bond bridge tuntap vlan wireless; do - if type "_is_${f}" >/dev/null 2>&1; then - if _is_${f}; then - veinfo "netplug does not work with" "${f}" - return 0 - fi - fi - done - - ebegin "Starting netplug on" "${IFACE}" - - # Mark the us as inactive so netplug can restart us - mark_service_inactive - - # Start netplug - start-stop-daemon --start --exec /sbin/netplugd \ - --pidfile "${pidfile}" \ - -- -i "${IFACE}" -P -p "${pidfile}" -c /dev/null - eend "$?" || return 1 - - eindent - - # IFACE-specific, then global, then default - eval timeout=\$plug_timeout_${IFVAR} - [ -z "${timeout}" ] && timeout=$plug_timeout - [ -z "${timeout}" ] && timeout=-1 - if [ ${timeout} -eq 0 ]; then - ewarn "WARNING: infinite timeout set for ${IFACE} to come up" - elif [ ${timeout} -lt 0 ]; then - einfo "Backgrounding ..." - exit 1 - fi - - veinfo "Waiting for ${IFACE} to be marked as started" - - local i=0 - while true; do - if service_started; then - _show_address - exit 0 - fi - sleep 1 - [ ${timeout} -eq 0 ] && continue - : $(( i += 1 )) - [ ${i} -ge ${timeout} ] && break - done - - eend 1 "Failed to configure ${IFACE} in the background" - exit 1 -} - -netplugd_stop() -{ - yesno ${IN_BACKGROUND} && return 0 - - local pidfile="/var/run/netplugd-${IFACE}.pid" - [ ! -e "${pidfile}" ] && return 0 - - ebegin "Stopping netplug on" "${IFACE}" - start-stop-daemon --stop --quiet --exec /sbin/netplugd \ - --pidfile "${pidfile}" - eend $? -} diff --git a/net/pppd.sh b/net/pppd.sh deleted file mode 100644 index 97bd3ee5..00000000 --- a/net/pppd.sh +++ /dev/null @@ -1,243 +0,0 @@ -# Copyright (c) 2005-2007 Gentoo Foundation -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -pppd_depend() -{ - program /usr/sbin/pppd - after interface - before dhcp - provide ppp -} - -is_ppp() -{ - [ -e /var/run/ppp-"${IFACE}".pid ] -} - -requote() -{ - printf "'%s' " "$@" -} - -pppd_pre_start() -{ - # Interface has to be called ppp - [ "${IFACE%%[0-9]*}" = "ppp" ] || return 0 - - # Set our base metric - metric=4000 - - if yesno ${IN_BACKGROUND}; then - local config= - eval config=\$config_${IFVAR} - # If no config for ppp then don't default to DHCP - if [ -z "${config}" ]; then - eval config_${IFVAR}=null - fi - return 0 - fi - - local link= i= unit="${IFACE#ppp}" opts= - - # PPP requires a link to communicate over - normally a serial port - # PPPoE communicates over Ethernet - # PPPoA communicates over ATM - # In all cases, the link needs to be available before we start PPP - eval link=\$link_${IFVAR} - [ -n "${link}" ] || return 0 - - case "${link}" in - /*) - if [ ! -e "${link}" ]; then - eerror "${link} does not exist" - eerror "Please verify hardware or kernel module (driver)" - return 1 - fi - ;; - esac - - if [ -z "${unit}" ]; then - eerror "PPP requires a unit - use net.ppp[0-9] instead of net.ppp" - return 1 - fi - - # We need to flatten the useless array - set -- $(_get_array "pppd_${IFVAR}") - opts="$@" - - local mtu= hasmtu=false hasmru=false hasmaxfail=false haspersist=false - local hasupdetach=false hasdefaultmetric=false - for i in ${opts}; do - case "${i}" in - unit|nodetach|linkname) - eerror "The option \"${i}\" is not allowed in pppd_${IFVAR}" - return 1 - ;; - defaultmetric) hasdefaultmetric=true;; - mtu) hasmtu=true;; - mru) hasmru=true;; - maxfail) hasmaxfail=true;; - persist) haspersist=true;; - updetach) hasupdetach=true;; - esac - done - - # Might be set in conf.d/net - local username= password= passwordset= - eval username=\$username_${IFVAR} - eval password=\$password_${IFVAR} - eval passwordset=\$\{password_${IFVAR}-x\} - if [ -n "${username}" ] \ - && [ -n "${password}" -o -z "${passwordset}" ]; then - opts="plugin passwordfd.so ${opts} passwordfd 0" - fi - - if ! ${hasdefaultmetric}; then - local m= - eval m=\$metric_${IFVAR} - [ -z "${m}" ] && : $(( m = metric + $(_ifindex) )) - opts="${opts} defaultmetric ${m}" - fi - if [ -n "${mtu}" ]; then - ${hasmtu} || opts="${opts} mtu ${mtu}" - ${hasmru} || opts="${opts} mru ${mtu}" - fi - ${hasmaxfail} || opts="${opts} maxfail 0" - ${haspersist} || opts="${opts} persist" - - # Set linkname because we need /var/run/ppp-${linkname}.pid - # This pidfile has the advantage of being there, - # even if ${IFACE} interface was never started - opts="linkname ${IFACE} ${opts}" - - # Setup auth info - if [ -n "${username}" ]; then - opts="user '${username}' remotename ${IFACE} ${opts}" - fi - - # Load a custom interface configuration file if it exists - [ -f "/etc/ppp/options.${IFACE}" ] \ - && opts="${opts} file '/etc/ppp/options.${IFACE}'" - - # Set unit - opts="unit ${unit} ${opts}" - - # Setup connect script - local chatprog="/usr/sbin/chat -e -E -v" phone= - eval phone=\$phone_number_${IFVAR} - set -- ${phone} - [ -n "$1" ] && chatprog="${chatprog} -T '$1'" - [ -n "$2" ] && chatprog="${chatprog} -U '$2'" - # We need to flatten the useless array - set -- $(_get_array "chat_${IFVAR}") - if [ $# != 0 ]; then - opts="${opts} connect '$(echo ${chatprog} $@ | sed -e "s:':'\\\\'':g")'" - fi - - # Add plugins - local haspppoa=false haspppoe=false plugins="$(_get_array "plugins_${IFVAR}")" - local IFS="$__IFS" - for i in ${plugins}; do - unset IFS - set -- ${i} - case "$1" in - passwordfd) continue;; - pppoa) shift; set -- "pppoatm" "$@";; - pppoe) shift; set -- "rp-pppoe" "$@";; - capi) shift; set -- "capiplugin" "$@";; - esac - case "$1" in - rp-pppoe) haspppoe=true;; - pppoatm) haspppoa=true;; - esac - if [ "$1" = "rp-pppoe" ] || [ "$1" = "pppoatm" -a "${link}" != "/dev/null" ]; then - opts="${opts} connect true" - set -- "$@" "${link}" - fi - opts="plugin $1.so ${opts}" - shift - opts="${opts} $@" - done - unset IFS - - #Specialized stuff. Insert here actions particular to connection type (pppoe,pppoa,capi) - local insert_link_in_opts=1 - if ${haspppoe}; then - if [ ! -e /proc/net/pppoe ]; then - # Load the PPPoE kernel module - if ! modprobe pppoe; then - eerror "kernel does not support PPPoE" - return 1 - fi - fi - - # Ensure that the link exists and is up - ( IFACE="${link}"; _exists true && _up ) || return 1 - insert_link_in_opts=0 - fi - - if ${haspppoa}; then - if [ ! -d /proc/net/atm ]; then - # Load the PPPoA kernel module - if ! modprobe pppoatm; then - eerror "kernel does not support PPPoATM" - return 1 - fi - fi - - if [ "${link}" != "/dev/null" ]; then - insert_link_in_opts=0 - else - ewarn "WARNING: An [itf.]vpi.vci ATM address was expected in link_${IFVAR}" - fi - - fi - [ "${insert_link_in_opts}" = "0" ] || opts="${link} ${opts}" - - ebegin "Starting pppd in ${IFACE}" - mark_service_inactive - if [ -n "${username}" ] \ - && [ -n "${password}" -o -z "${passwordset}" ]; then - printf "%s" "${password}" | \ - eval start-stop-daemon --start --exec /usr/sbin/pppd \ - --pidfile "/var/run/ppp-${IFACE}.pid" -- "${opts}" >/dev/null - else - eval start-stop-daemon --start --exec /usr/sbin/pppd \ - --pidfile "/var/run/ppp-${IFACE}.pid" -- "${opts}" >/dev/null - fi - - if ! eend $? "Failed to start PPP"; then - mark_service_stopped - return 1 - fi - - if ${hasupdetach}; then - _show_address - else - einfo "Backgrounding ..." - fi - - # pppd will re-call us when we bring the interface up - exit 0 -} - -# Dummy function for users that still have config_ppp0="ppp" -pppd_start() -{ - return 0 -} - -pppd_stop() -{ - yesno ${IN_BACKGROUND} && return 0 - local pidfile="/var/run/ppp-${IFACE}.pid" - - [ ! -s "${pidfile}" ] && return 0 - - # Give pppd at least 30 seconds do die, #147490 - einfo "Stopping pppd on ${IFACE}" - start-stop-daemon --stop --quiet --exec /usr/sbin/pppd \ - --pidfile "${pidfile}" --retry 30 - eend $? -} diff --git a/net/pump.sh b/net/pump.sh deleted file mode 100644 index ddd454cb..00000000 --- a/net/pump.sh +++ /dev/null @@ -1,59 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -pump_depend() -{ - program /sbin/pump - after interface - provide dhcp -} - -_config_vars="$_config_vars dhcp pump" - -pump_start() -{ - local args= opt= opts= - - # Get our options - eval opts=\$dhcp_${IFVAR} - [ -z "${opts}" ] && opts=${dhcp} - - # Map some generic options to dhcpcd - for opt in ${opts}; do - case "${opt}" in - nodns) args="${args} --no-dns";; - nontp) args="${args} --no-ntp";; - nogateway) args="${args} --no-gateway";; - esac - done - - # Add our route metric - [ "${metric:-0}" != "0" ] && args="${args} --route-metric ${metric}" - - args="${args} --win-client-ident" - args="${args} --keep-up --interface ${IFACE}" - - ebegin "Running pump" - eval pump "${args}" - eend $? || return 1 - - _show_address - return 0 -} - -pump_stop() -{ - # We check for a pump process first as querying for status - # causes pump to spawn a process - start-stop-daemon --quiet --test --stop --exec /sbin/pump || return 0 - - # Check that pump is running on the interface - if ! pump --status --interface "${IFACE}" >/dev/null 2>&1; then - return 0 - fi - - # Pump always releases the lease - ebegin "Stopping pump on ${IFACE}" - pump --release --interface "${IFACE}" - eend $? "Failed to stop pump" -} diff --git a/net/ssidnet.sh b/net/ssidnet.sh deleted file mode 100644 index b0eed567..00000000 --- a/net/ssidnet.sh +++ /dev/null @@ -1,24 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -ssidnet_depend() -{ - before interface system - after wireless -} - -ssidnet_pre_start() -{ - [ -z "${SSID}" -a -z "${SSIDVAR}" ] && return 0 - - local mac=$(_get_ap_mac_address | sed -e 's/://g') x= - - vebegin "Configuring ${IFACE} for SSID ${SSID}" - _configure_variables "${mac}" "${SSIDVAR}" - - # Backwards compat for old gateway var - eval x=\$gateway_${SSIDVAR} - [ -n "${x}" ] && gateway=${x} - - veend 0 -} diff --git a/net/system.sh b/net/system.sh deleted file mode 100644 index 98017d5d..00000000 --- a/net/system.sh +++ /dev/null @@ -1,122 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -_config_vars="$_config_vars dns_servers dns_domain dns_search" -_config_vars="$_config_vars dns_sortlist dns_options" -_config_vars="$_config_vars ntp_servers nis_servers nis_domain" - -system_depend() -{ - after interface - before dhcp -} - -_system_dns() -{ - local servers= domain= search= sortlist= options= x= imetric= - - eval servers=\$dns_servers_${IFVAR} - [ -z "${servers}" ] && servers=${dns_servers} - - eval domain=\$dns_domain_${IFVAR} - [ -z "${domain}" ] && domain=${dns_domain} - - eval search=\$dns_search_${IFVAR} - [ -z "${search}" ] && search=${dns_search} - - eval sortlist=\$dns_sortlist_${IFVAR} - [ -z "${sortlist}" ] && sortlist=${dns_sortlist} - - eval options=\$dns_options_${IFVAR} - [ -z "${options}" ] && options=${dns_options} - - [ -z "${servers}" -a -z "${domain}" -a -z "${search}" \ - -a -z "${sortlist}" -a -z "${options}" ] && return 0 - - local buffer="# Generated by net-scripts for interface ${IFACE}\n" - [ -n "${domain}" ] && buffer="${buffer}domain ${domain}\n" - [ -n "${search}" ] && buffer="${buffer}search ${search}\n" - - for x in ${servers}; do - buffer="${buffer}nameserver ${x}\n" - done - - [ -n "${sortlist}" ] && buffer="${buffer}sortlist ${sortlist}\n" - [ -n "${options}" ] && buffer="${buffer}options ${options}\n" - - # Support resolvconf if we have it. - if [ -x /sbin/resolvconf ]; then - x="-a ${IFACE}" - eval imetric=\${metric_${IFVAR}} - if [ -n "${imetric}" ]; then - x="${x} -m ${imetric}" - fi - printf "${buffer}" | resolvconf ${x} - else - printf "${buffer}" > /etc/resolv.conf - chmod 644 /etc/resolv.conf - fi -} - -_system_ntp() -{ - local servers= buffer= x= - - eval servers=\$ntp_servers_${IFVAR} - [ -z "${servers}" ] && servers=${ntp_servers} - [ -z "${servers}" ] && return 0 - - buffer="# Generated by net-scripts for interface ${IFACE}\n" - buffer="${buffer}restrict default noquery notrust nomodify\n" - buffer="${buffer}restrict 127.0.0.1\n" - - for x in ${servers}; do - buffer="${buffer}restrict ${x} nomodify notrap noquery\n" - buffer="${buffer}server ${x}\n" - done - - printf "${buffer}" > /etc/ntp.conf - chmod 644 /etc/ntp.conf -} - -_system_nis() -{ - local servers= domain= x= buffer= - - eval servers=\$nis_servers_${IFVAR} - [ -z "${servers}" ] && servers=${nis_servers} - - eval domain=\$nis_domain_${IFVAR} - [ -z "${domain}" ] && domain=${nis_domain} - - [ -z "${servers}" -a -z "${domain}" ] && return 0 - - buffer="# Generated by net-scripts for interface ${iface}\n" - - if [ -n "${domain}" ]; then - hostname -y "${domain}" - if [ -n "${servers}" ]; then - for x in ${servers}; do - buffer="${buffer}domain ${domain} server ${x}\n" - done - else - buffer="${buffer}domain ${domain} broadcast\n" - fi - else - for x in ${servers}; do - buffer="${buffer}ypserver ${x}\n" - done - fi - - printf "${buffer}" > /etc/yp.conf - chmod 644 /etc/yp.conf -} - -system_pre_start() -{ - _system_dns - _system_ntp - _system_nis - - return 0 -} diff --git a/net/tuntap.sh b/net/tuntap.sh deleted file mode 100644 index 331fd83f..00000000 --- a/net/tuntap.sh +++ /dev/null @@ -1,102 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -tuntap_depend() -{ - before bridge interface macchanger - program ip openvpn tunctl -} - -_config_vars="$_config_vars iproute2 openvpn tunctl" - -_is_tuntap() -{ - [ -n "$(RC_SVCNAME="net.${IFACE}"; export RC_SVCNAME ; service_get_value tuntap)" ] -} - -tuntap_pre_start() -{ - local tuntap= - local rc= - eval tuntap=\$tuntap_${IFVAR} - - [ -z "${tuntap}" ] && return 0 - - if [ ! -e /dev/net/tun ]; then - if ! modprobe tun; then - eerror "TUN/TAP support is not present in this kernel" - return 1 - fi - vebegin "Waiting for /dev/net/tun" - # /dev/net/tun can take its time to appear - local timeout=10 - while [ ! -e /dev/net/tun -a ${timeout} -gt 0 ]; do - sleep 1 - : $(( timeout -= 1 )) - done - if [ ! -e /dev/net/tun ]; then - eerror "TUN/TAP support present but /dev/net/tun is not" - return 1 - fi - veend 0 - fi - - ebegin "Creating Tun/Tap interface ${IFACE}" - - # Set the base metric to 1000 - metric=1000 - - local i_opts= o_opts= t_opts= - local do_iproute2=false do_openvpn=false do_tunctl=false - eval i_opts=\$iproute2_${IFVAR} - eval o_opts=\$openvpn_${IFVAR} - eval t_opts=\$tunctl_${IFVAR} - - if [ -n "${i_opts}" ] && type ip >/dev/null 2>&1; then - do_iproute2=true - elif [ -n "${o_opts}" ] && type openvpn >/dev/null 2>&1; then - do_openvpn=true - elif [ -n "${t_opts}" ] && type tunctl >/dev/null 2>&1; then - do_tunctl=true - elif type ip >/dev/null 2>&1; then - do_iproute2=true - elif type openvpn >/dev/null 2>&1; then - do_openvpn=true - elif type tunctl >/dev/null 2>&1; then - do_tunctl=true - fi - - if ${do_iproute2}; then - ip tuntap add dev "${IFACE}" mode "${tuntap}" ${i_opts} - rc=$? - elif ${do_openvpn}; then - openvpn --mktun --dev-type "${tuntap}" --dev "${IFACE}" \ - ${o_opts} >/dev/null - rc=$? - elif ${do_tunctl}; then - tunctl ${t_opts} -t "${IFACE}" >/dev/null - rc=$? - else - eerror "Neither iproute2, openvpn nor tunctl has been found, please install" - eerror "either \"iproute2\" \"openvpn\" or \"usermode-utilities\"." - rc=1 - fi - eend $rc && _up && service_set_value tuntap "${tuntap}" -} - -tuntap_post_stop() -{ - _is_tuntap || return 0 - - ebegin "Destroying Tun/Tap interface ${IFACE}" - if type ip > /dev/null 2>&1; then - ip tuntap del dev ${IFACE} mode $(service_get_value tuntap) - elif type tunctl >/dev/null 2>&1; then - tunctl -d "${IFACE}" >/dev/null - else - openvpn --rmtun \ - --dev-type "$(service_get_value tuntap)" \ - --dev "${IFACE}" >/dev/null - fi - eend $? -} diff --git a/net/udhcpc.sh b/net/udhcpc.sh deleted file mode 100644 index 130f8736..00000000 --- a/net/udhcpc.sh +++ /dev/null @@ -1,110 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -udhcpc_depend() -{ - program start /bin/busybox - after interface - provide dhcp -} - -_config_vars="$_config_vars dhcp udhcpc" - -udhcpc_start() -{ - local args= opt= opts= pidfile="/var/run/udhcpc-${IFACE}.pid" - local sendhost=true cachefile="/var/cache/udhcpc-${IFACE}.lease" - - eval args=\$udhcpc_${IFVAR} - - # Get our options - eval opts=\$dhcp_${IFVAR} - [ -z "${opts}" ] && opts=${dhcp} - - # This omits the Gentoo specific patch to busybox, - # but it creates temporary files. - # We can move this stuff to udhcpc hook script to avoid that, should we do? - local conf="/var/run/udhcpc-${IFACE}.conf" - echo -n >"$conf" - # Map some generic options to dhcpcd - for opt in ${opts}; do - case "${opt}" in - nodns) echo "PEER_DNS=no" >>"$conf" ;; - nontp) echo "PEER_NTP=no" >>"$conf" ;; - nogateway) echo "PEER_ROUTERS=no" >>"$conf" ;; - nosendhost) sendhost=false; - esac - done - - [ "${metric:-0}" != "0" ] && echo "IF_METRIC=${metric}" >>"$conf" - - ebegin "Running udhcpc" - - # Try and load the cache if it exists - if [ -f "${cachefile}" ]; then - case "$ {args} " in - *" --request="*|*" -r "*);; - *) - local x=$(cat "${cachefile}") - # Check for a valid ip - case "${x}" in - *.*.*.*) args="${args} --request=${x}";; - esac - ;; - esac - fi - - case " ${args} " in - *" --quit "*|*" -q "*) x="/bin/busybox udhcpc";; - *) x="start-stop-daemon --start --exec /bin/busybox \ - --pidfile \"${pidfile}\" -- udhcpc";; - esac - - case " ${args} " in - *" --hostname="*|*" -h "*|*" -H "*);; - *) - if ${sendhost}; then - local hname="$(hostname)" - if [ "${hname}" != "(none)" ] && [ "${hname}" != "localhost" ]; then - args="${args} -x hostname:'${hname}'" - fi - fi - ;; - esac - - eval "${x}" "${args}" --interface="${IFACE}" --now \ - --script="${RC_LIBEXECDIR}/sh/udhcpc-hook.sh" \ - --pidfile="${pidfile}" >/dev/null - eend $? || return 1 - - _show_address - return 0 -} - -udhcpc_stop() -{ - local pidfile="/var/run/udhcpc-${IFACE}.pid" opts= - [ ! -f "${pidfile}" ] && return 0 - - # Get our options - eval opts=\$dhcp_${IFVAR} - [ -z "${opts}" ] && opts=${dhcp} - - ebegin "Stopping udhcpc on ${IFACE}" - case " ${opts} " in - *" release "*) - start-stop-daemon --stop --quiet --signal USR2 \ - --exec /bin/busybox --pidfile "${pidfile}" - if [ -f /var/cache/udhcpc-"${IFACE}".lease ]; then - rm -f /var/cache/udhcpc-"${IFACE}".lease - fi - ;; - esac - - start-stop-daemon --stop --exec /bin/busybox --pidfile "${pidfile}" - eend $? - - if [ -e "/var/run/udhcpc-${IFACE}.conf" ]; then - rm -f "/var/run/udhcpc-${IFACE}.conf" - fi -} diff --git a/net/vlan.sh b/net/vlan.sh deleted file mode 100644 index 10040afa..00000000 --- a/net/vlan.sh +++ /dev/null @@ -1,146 +0,0 @@ -# Copyright (c) 2007-2008 Roy Marples -# Released under the 2-clause BSD license. - -vlan_depend() -{ - program ip - after interface - before dhcp -} - -_config_vars="$_config_vars vlans" - -_is_vlan() -{ - [ ! -d /proc/net/vlan ] && return 1 - [ -e /proc/net/vlan/"${IFACE}" ] && return 0 - grep -Eq "^${IFACE}[[:space:]]+" /proc/net/vlan/config -} - -_get_vlans() -{ - [ -e /proc/net/vlan/config ] || return 1 - sed -n -e 's/^\W*\([^ ]*\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config -} - -_check_vlan() -{ - if [ ! -d /proc/net/vlan ]; then - modprobe 8021q - if [ ! -d /proc/net/vlan ]; then - eerror "VLAN (802.1q) support is not present in this kernel" - return 1 - fi - fi -} - -vlan_pre_start() -{ - local vconfig - eval vconfig=\$vconfig_${IFVAR} - if [ -n "${vconfig}" ]; then - eerror "You must convert your vconfig_ VLAN entries to vlan${N} entries." - return 1 - fi - local vlans= - eval vlans=\$vlans_${IFVAR} - [ -z "$vlans" ] && return 0 - case " ${MODULES} " in - *" ifconfig "*) - eerror "sys-apps/iproute2 is required to configure VLANs" - return 1 ;; - esac -} - -vlan_post_start() -{ - local vlans= - eval vlans=\$vlans_${IFVAR} - [ -z "${vlans}" ] && return 0 - - _check_vlan || return 1 - _exists || return 1 - - local vlan= e= s= vname= vflags= vingress= vegress= - for vlan in ${vlans}; do - einfo "Adding VLAN ${vlan} to ${IFACE}" - # We need to gather all interface configuration options - # 1) naming. Default to the standard "${IFACE}.${vlan}" but it can be anything - eval vname=\$${IFACE}_vlan${vlan}_name - [ -z "${vname}" ] && eval vname=\$vlan${vlan}_name - [ -z "${vname}" ] && vname="${IFACE}.${vlan}" - # 2) flags - eval vflags=\$${IFACE}_vlan${vlan}_flags - [ -z "${vflags}" ] && eval vflags=\$vlan${vlan}_flags - # 3) ingress/egress map - eval vingress=\$${IFACE}_vlan${vlan}_ingress - [ -z "${vingress}" ] && eval vingress=\$vlan${vlan}_ingress - [ -z "${vingress}" ] || vingress="ingress-qos-map ${vingress}" - eval vegress=\$${IFACE}_vlan${vlan}_egress - [ -z "${vegress}" ] && eval vegress=\$vlan${vlan}_egress - [ -z "${vegress}" ] || vegress="egress-qos-map ${vegress}" - - # txqueue - local txqueuelen= - eval txqueuelen=\$txqueuelen_${IFACE}_vlan${vlan} - [ -z "${txqueuelen}" ] && eval txqueuelen=\$txqueuelen_vlan${vlan} - # mac - local mac= - eval mac=\$mac_${IFACE}_vlan${vlan} - [ -z "${mac}" ] && eval mac=\$mac_vlan${vlan} - # broadcast - local broadcast= - eval broadcast=\$broadcast_${IFACE}_vlan${vlan} - [ -z "${broadcast}" ] && eval broadcast=\$broadcast_vlan${vlan} - # mtu - local mtu= - eval mtu=\$mtu_${IFACE}_vlan${vlan} - [ -z "${mtu}" ] && eval mtu=\$mtu_vlan${vlan} - - # combine it all - local opts="${txqueuelen:+txqueuelen} ${txqueuelen} ${mac:+address} ${mac} ${broadcast:+broadcast} ${broadcast} ${mtu:+mtu} ${mtu}" - - veinfo "ip link add link \"${IFACE}\" name \"${vname}\" ${opts} type vlan id \"${vlan}\" ${vflags} ${vingress} ${vegress}" - e="$(ip link add link "${IFACE}" name "${vname}" ${opts} type vlan id "${vlan}" ${vflags} ${vingress} ${vegress} 2>&1 1>/dev/null)" - if [ -n "${e}" ]; then - eend 1 "${e}" - continue - fi - - # We may not want to start the vlan ourselves - eval s=\$vlan_start_${IFVAR} - yesno ${s:-yes} || continue - - # We need to work out the interface name of our new vlan id - local ifname="$(sed -n -e \ - 's/^\([^[:space:]]*\) *| '"${vlan}"' *| .*'"${IFACE}"'$/\1/p' \ - /proc/net/vlan/config )" - mark_service_started "net.${ifname}" - ( - RC_SVCNAME="net.${ifname}" ; export RC_SVCNAME - start - ) || mark_service_stopped "net.${ifname}" - done - - return 0 -} - -vlan_pre_stop() -{ - local vlan= - - _exists || return 0 - - for vlan in $(_get_vlans); do - einfo "Removing VLAN ${vlan##*.} from ${IFACE}" - ( - RC_SVCNAME="net.${vlan}" ; export RC_SVCNAME - stop - ) && { - mark_service_stopped "net.${vlan}" - ip link delete "${vlan}" type vlan >/dev/null - } - done - - return 0 -} diff --git a/net/wpa_supplicant.sh b/net/wpa_supplicant.sh deleted file mode 100644 index 53b0256c..00000000 --- a/net/wpa_supplicant.sh +++ /dev/null @@ -1,212 +0,0 @@ -# Copyright (c) 2007-2009 Roy Marples -# Released under the 2-clause BSD license. - -wpa_supplicant_depend() -{ - wpas=/usr/sbin/wpa_supplicant - [ -x ${wpas} ] || wpas=/sbin/wpa_supplicant - if [ -x ${wpas} ]; then - program start ${wpas} - # bug 345281: if wpa_supplicant is built w/ USE=dbus, we need to start - # dbus before we can start wpa_supplicant. - ${wpas} -h |grep DBus -sq - [ $? -eq 0 ] && need dbus - fi - after macnet plug - before interface - provide wireless - - # Prefer us over iwconfig - after iwconfig -} - -# Only set these functions if not set already -# IE, prefer to use iwconfig -if ! type _get_ssid >/dev/null 2>&1; then -_get_ssid() -{ - local timeout=5 ssid= - - while [ ${timeout} -gt 0 ]; do - ssid=$(wpa_cli -i"${IFACE}" status | sed -n -e 's/^ssid=//p') - if [ -n "${ssid}" ]; then - echo "${ssid}" - return 0 - fi - sleep 1 - : $(( timeout -= 1 )) - done - - return 1 -} - -_get_ap_mac_address() -{ - wpa_cli -i"${IFACE}" status | sed -n -e 's/^bssid=\(.*\)$/\1/p' \ - | tr '[:lower:]' '[:upper:]' -} -fi - -wpa_supplicant_pre_start() -{ - local opts= cliopts= cfgfile= ctrl_dir= wireless=true - local wpas=/usr/sbin/wpa_supplicant wpac=/usr/bin/wpa_cli - local actfile=/etc/wpa_supplicant/wpa_cli.sh - - if [ ! -x "${wpas}" ]; then - wpas=/sbin/wpa_supplicant - wpac=/bin/wpa_cli - fi - [ "${RC_UNAME}" = "Linux" ] || unset wpac - [ -e "${actfile}" ] || unset wpac - - eval opts=\$wpa_supplicant_${IFVAR} - eval cliopts=\$wpa_cli_${IFVAR} - [ -z "${cliopts}" ] && cliopts=${wpa_cli} - case " ${opts} " in - *" -Dwired "*) wireless=false;; - *) _is_wireless || return 0;; - esac - - # We don't configure wireless if we're being called from - # the background unless we're not currently running - if yesno ${IN_BACKGROUND}; then - if ${wireless} && \ - service_started_daemon "${RC_SVCNAME}" "${wpas}"; then - SSID=$(_get_ssid "${IFACE}") - SSIDVAR=$(shell_var "${SSID}") - service_set_value "SSID" "${SSID}" - metric=2000 - fi - return 0 - fi - - service_set_value "SSID" "" - ebegin "Starting wpa_supplicant on ${IFVAR}" - - if type iwconfig_defaults >/dev/null 2>&1; then - iwconfig_defaults - iwconfig_user_config - fi - - cfgfile=${opts##* -c} - if [ -n "${cfgfile}" -a "${cfgfile}" != "${opts}" ]; then - case "${cfgfile}" in - " "*) cfgfile=${cfgfile# *};; - esac - cfgfile=${cfgfile%% *} - else - # Support new and old style locations - cfgfile="/etc/wpa_supplicant/wpa_supplicant-${IFACE}.conf" - [ ! -e "${cfgfile}" ] \ - && cfgfile="/etc/wpa_supplicant/wpa_supplicant.conf" - [ ! -e ${cfgfile} ] \ - && cfgfile="/etc/wpa_supplicant.conf" - opts="${opts} -c ${cfgfile}" - fi - - if [ ! -f ${cfgfile} ]; then - eend 1 "/etc/wpa_supplicant/wpa_supplicant.conf not found" - return 1 - fi - - # Work out where the ctrl_interface dir is if it's not specified - local ctrl_dir=$(sed -e 's/^ *//' \ - -e '/^ctrl_interface=/!d' \ - -e 's/^ctrl_interface=//' \ - -e 's/^ *//' \ - -e 's/^DIR=//' \ - -e 's/^ *//' \ - -e 's/GROUP=.*//' \ - -e 's/ *$//' \ - "${cfgfile}") - if [ -z "${ctrl_dir}" ]; then - ctrl_dir=${opts##* -C} - if [ -n "${ctrl_dir}" -a "${ctrl_dir}" != "${opts}" ]; then - case "${ctrl_dir}" in - " "*) ctrl_dir=${ctrl_dir# *};; - esac - ctrl_dir=${ctrl_dir%% *} - else - ctrl_dir="/var/run/wpa_supplicant" - opts="${opts} -C ${ctrl_dir}" - fi - fi - service_set_value ctrl_dir "${ctrl_dir}" - - if [ -n "${wpac}" ]; then - opts="${opts} -W" - elif service_started devd; then - mark_service_inactive - fi - start-stop-daemon --start --exec "${wpas}" \ - --pidfile "/var/run/wpa_supplicant-${IFACE}.pid" \ - -- ${opts} -B -i "${IFACE}" \ - -P "/var/run/wpa_supplicant-${IFACE}.pid" - eend $? || return 1 - - # If we don't have a working wpa_cli and action file continue - if [ -z "${wpac}" ]; then - if service_started devd; then - ebegin "Backgrounding ..." - exit 1 - fi - return 0 - fi - - # Starting wpa_supplication-0.4.0, we can get wpa_cli to - # start/stop our scripts from wpa_supplicant messages - local inact=false - service_inactive && inact=true - mark_service_inactive - - ebegin "Starting wpa_cli on" "${IFACE}" - start-stop-daemon --start --exec "${wpac}" \ - --pidfile "/var/run/wpa_cli-${IFACE}.pid" \ - -- ${cliopts} -a "${actfile}" -p "${ctrl_dir}" -i "${IFACE}" \ - -P "/var/run/wpa_cli-${IFACE}.pid" -B - if eend $?; then - ebegin "Backgrounding ..." - exit 1 - fi - - # wpa_cli failed to start? OK, error here - start-stop-daemon --quiet --stop --exec "${wpas}" \ - --pidfile "/var/run/wpa_supplicant-${IFACE}.pid" - ${inact} || mark_service_stopped - return 1 -} - -wpa_supplicant_post_stop() -{ - local wpas=/usr/sbin/wpa_supplicant wpac=/usr/bin/wpa_cli - - if [ ! -x "${wpas}" ]; then - wpas=/sbin/wpa_supplicant - wpac=/bin/wpa_cli - fi - - if yesno "${IN_BACKGROUND}"; then - # Only stop wpa_supplicant if it's not the controlling daemon - ! service_started_daemon "${RC_SVCNAME}" "${wpas}" 1 - fi - [ $? != 0 ] && return 0 - - local pidfile="/var/run/wpa_cli-${IFACE}.pid" - if [ -f ${pidfile} ]; then - ebegin "Stopping wpa_cli on ${IFACE}" - start-stop-daemon --stop --exec "${wpac}" --pidfile "${pidfile}" - eend $? - fi - - pidfile="/var/run/wpa_supplicant-${IFACE}.pid" - if [ -f ${pidfile} ]; then - ebegin "Stopping wpa_supplicant on ${IFACE}" - start-stop-daemon --stop --exec "${wpas}" --pidfile "${pidfile}" - eend $? - fi - - # If wpa_supplicant exits uncleanly, we need to remove the stale dir - [ -S "/var/run/wpa_supplicant/${IFACE}" ] \ - && rm -f "/var/run/wpa_supplicant/${IFACE}" -} diff --git a/runlevels/Makefile b/runlevels/Makefile index f6911139..25e3e1ab 100644 --- a/runlevels/Makefile +++ b/runlevels/Makefile @@ -1,3 +1,5 @@ +include ../mk/net.mk + BOOT= bootmisc fsck hostname localmount loopback \ root swap swapfiles sysctl urandom ${BOOT-${OS}} DEFAULT= local netmount @@ -10,7 +12,7 @@ BOOTDIR= ${LEVELDIR}/boot DEFAULTDIR= ${LEVELDIR}/default SHUTDOWNDIR= ${LEVELDIR}/shutdown -ifeq (${MKNET},) +ifeq (${MKNET},yes) BOOT+= network staticroute endif @@ -25,12 +27,6 @@ BOOT-${OS}= SHUTDOWN-${OS}= SYSINIT-${OS}= -ifeq (${MKNET},oldnet) -BOOT-FreeBSD+= net.lo0 -BOOT-Linux+= net.lo -BOOT-NetBSD+= net.lo0 -endif - BOOT-BSD= hostid newsyslog savecore syslogd swap-blk # Generic BSD stuff diff --git a/sh/.gitignore b/sh/.gitignore index 9fe55105..386c42f6 100644 --- a/sh/.gitignore +++ b/sh/.gitignore @@ -6,9 +6,6 @@ runscript.sh cgroup-release-agent.sh init.sh init-early.sh -ifwatchd-carrier.sh -ifwatchd-nocarrier.sh rc-cgroup.sh -udhcpc-hook.sh tmpfiles.sh migrate-to-run.sh diff --git a/sh/Makefile b/sh/Makefile index 043b1448..7307f63a 100644 --- a/sh/Makefile +++ b/sh/Makefile @@ -13,12 +13,12 @@ SRCS-FreeBSD= BIN-FreeBSD= SRCS-Linux= cgroup-release-agent.sh.in init-early.sh.in migrate-to-run.sh.in \ - rc-cgroup.sh.in udhcpc-hook.sh.in + rc-cgroup.sh.in BIN-Linux= cgroup-release-agent.sh init-early.sh migrate-to-run.sh \ - rc-cgroup.sh udhcpc-hook.sh + rc-cgroup.sh -SRCS-NetBSD= ifwatchd-carrier.sh.in ifwatchd-nocarrier.sh.in -BIN-NetBSD= ifwatchd-carrier.sh ifwatchd-nocarrier.sh +SRCS-NetBSD= +BIN-NetBSD= include ${MK}/scripts.mk diff --git a/sh/ifwatchd-carrier.sh.in b/sh/ifwatchd-carrier.sh.in deleted file mode 100644 index 5b5d8b34..00000000 --- a/sh/ifwatchd-carrier.sh.in +++ /dev/null @@ -1,5 +0,0 @@ -#!@SHELL@ -# Wrapper for ifwatchd(8) - -IN_BACKGROUND=yes ; export IN_BACKGROUND -$RC_SERVICE --quiet start diff --git a/sh/ifwatchd-nocarrier.sh.in b/sh/ifwatchd-nocarrier.sh.in deleted file mode 100644 index bbecfe84..00000000 --- a/sh/ifwatchd-nocarrier.sh.in +++ /dev/null @@ -1,5 +0,0 @@ -#!@SHELL@ -# Wrapper for ifwatchd(8) - -IN_BACKGROUND=yes ; export IN_BACKGROUND -$RC_SERVICE --quiet stop diff --git a/sh/udhcpc-hook.sh.in b/sh/udhcpc-hook.sh.in deleted file mode 100644 index 0744a04c..00000000 --- a/sh/udhcpc-hook.sh.in +++ /dev/null @@ -1,117 +0,0 @@ -#!@SHELL@ -# busybox udhcp setup script - -PATH=/bin:/usr/bin:/sbin:/usr/sbin - -peer_var() -{ - [ -n "$1" ] && [ "$1" != "yes" ] -} - -update_dns() -{ - peer_var "${PEER_DNS}" && return - [ -z "${domain}" ] && [ -z "${dns}" ] && return - - conf="# Generated by udhcpc for ${interface}\n" - [ -n "${domain}" ] && conf="${conf}domain ${domain}\n" - for i in ${dns} ; do - conf="${conf}nameserver ${i}\n" - done - if [ -x /sbin/resolvconf ] ; then - printf "${conf}" | resolvconf -a ${interface} - else - printf "${conf}" > /etc/resolv.conf - chmod 644 /etc/resolv.conf - fi -} - -update_ntp() -{ - peer_var "${PEER_NTP}" && return - [ -z "${ntpsrv}" ] && return - - conf="# Generated by udhcpc for interface ${interface}\n" - conf="${conf}restrict default noquery notrust nomodify\n" - conf="${conf}restrict 127.0.0.1\n" - for i in ${ntpsrv} ; do - conf="${conf}restrict ${i} nomodify notrap noquery\n" - conf="${conf}server ${i}\n" - done - conf="${conf}driftfile /var/lib/ntp/ntp.drift\n" - conf="${conf}logfile /var/log/ntp.log\n" - printf "${conf}" > /etc/ntp.conf - chmod 644 /etc/ntp.conf -} - -update_hostname() -{ - peer_var "${PEER_HOSTNAME}" && return - [ -z "${hostname}" ] && return - - myhost="$(hostname)" - [ -z "${myhost}" ] || [ "${myhost}" = "(none)" ] && hostname "${hostname}" -} - -update_interface() -{ - [ -n "${broadcast}" ] && broadcast="broadcast ${broadcast}" - [ -n "${subnet}" ] && netmask="netmask ${subnet}" - [ -n "${mtu}" ] && mtu="mtu ${mtu}" - ifconfig "${interface}" ${ip} ${broadcast} ${netmask} ${mtu} -} - -update_routes() -{ - peer_var "${PEER_ROUTERS}" && return - - if [ -n "${router}" ] ; then - metric= - [ -n "${IF_METRIC}" ] && metric="metric ${IF_METRIC}" - for i in ${router} ; do - route add default gw "${i}" ${metric} dev "${interface}" - done - fi -} - -deconfig() -{ - ifconfig "${interface}" 0.0.0.0 - - if ! peer_var "${PEER_ROUTERS}" ; then - while route del default dev "${interface}" >/dev/null 2>&1; do - : - done - fi - - if ! peer_var "${PEER_DNS}" ; then - [ -x /sbin/resolvconf ] && resolvconf -d "${interface}" - fi -} - -if [ -r "/var/run/udhcpc-${interface}.conf" ]; then - . "/var/run/udhcpc-${interface}.conf" -fi - -case "$1" in - bound|renew) - update_hostname - update_interface - update_routes - update_dns - update_ntp - ;; - deconfig|leasefail) - deconfig - ;; - nak) - echo "nak: ${message}" - ;; - *) - echo "unknown option $1" >&2 - echo "Usage: $0 {bound|deconfig|leasefail|nak|renew}" >&2 - exit 1 - ;; -esac - -exit 0