etc: create default rc.conf

Before now, /etc/rc.conf was created by the build system from multiple
rc.conf.* file fragments and there was no reason for this.

etc/.gitignore

@@ -1,3 +1,2 @@
-rc.conf
 rc
 rc.shutdown

etc/Makefile

@@ -1,10 +1,8 @@
 DIR=	${SYSCONFDIR}
-SRCS=	rc.conf.in rc.in rc.shutdown.in
+SRCS=	rc.in rc.shutdown.in
 BIN=	${BIN-${OS}}
 CONF=	rc.conf ${BIN-${OS}}
 
-CLEANFILES+=	rc.conf
-
 MK=	../mk
 include ${MK}/os.mk
 
@@ -23,6 +21,3 @@ CONF-NetBSD=
 SED_EXTRA=	${SED_EXTRA-${OS}}
 
 include ${MK}/scripts.mk
-
-rc.conf: rc.conf.in rc.conf.${OS}
-	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/rc.conf

@@ -0,0 +1,247 @@
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+#rc_shell=/bin/sh
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug controls which services we allow to be hotplugged.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# Hotplugged services appear in the "hotplugged" runlevel.
+# If rc_hotplug is set to any value, we compare the name of this service
+# to every pattern in the value, from left to right, and we allow the
+# service to be hotplugged if it matches a pattern, or if it matches no
+# patterns. Patterns can include shell wildcards.
+# To disable services from being hotplugged, prefix patterns with "!".
+#If rc_hotplug is not set or is empty, all hotplugging is disabled.
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be hotplugged.
+# Example - rc_hotplug="!net.*"
+# This allows services that do not match "net.*" to be hotplugged.
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+#unicode="NO"
+
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but  it can be adjusted here.
+#rc_fuser_timeout=60
+
+# Below is the default list of network fstypes.
+#
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which services do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+# This is the subsystem type.
+# It is used to match against keywords set by the keyword call in the
+# depend function of service scripts.
+#
+# It should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+# If it is commented out, automatic detection will be used.
+#
+# The list below shows all possible settings as well as the host
+# operating systems where they can be used and autodetected.
+#
+# ""               - nothing special
+# "docker"         - Docker container manager (Linux)
+# "jail"           - Jail (DragonflyBSD or FreeBSD)
+# "lxc"            - Linux Containers
+# "openvz"         - Linux OpenVZ
+# "prefix"         - Prefix
+# "rkt"            - CoreOS container management system (Linux)
+# "subhurd"        - Hurd subhurds (to be checked)
+# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
+# "uml"            - Usermode Linux
+# "vserver"        - Linux vserver
+# "xen0"           - Xen0 Domain (Linux and NetBSD)
+# "xenU"           - XenU Domain (Linux and NetBSD)
+#rc_sys=""
+
+# on Linux and Hurd, this is the number of ttys allocated for logins
+# It is used in the consolefont, keymaps, numlock and termencoding
+# service scripts.
+rc_tty_number=12
+
+##############################################################################
+# LINUX CGROUPS RESOURCE MANAGEMENT
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controller is mounted under
+# /sys/fs/cgroup.
+# None of the other options in this section work if this is set to "NO".
+#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"