Since commit 683a21b0a in Feburary 2011, iproute2 has been required for
new VLAN configuration. MACVLAN is also impossible to configure without
iproute2. However we did not check if iproute2 was actually in the
modules for a given interface, so it could end up hanging or giving
weird errors. Check for iproute2 before usage now.
X-Gentoo-Bug: 389437
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389437
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
We need to create interfaces of custom names before we can sucessfully
start them. To do this, we have to add tunnels during prestart instead
of start. Split up the ip6to4 script to do this, saving the computed
variables for use in start with the new service data commands.
X-Gentoo-Bug: 372575
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=372575
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Broadcast and IPv6 should not be used together. Do not try to set the
keyword for auto-generation of the broadcast address. If the user passes
a broadcast address for IPv6, throw an error.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Several of the optional flags were not being handled correctly, they
were being passed as values only, without the keyword before them.
Affected keywords: anycast, label, scope, valid_lft, preferred_lft
Also change the handling of keywords to a common setup now, making
broadcast and peer strings the same as the above keywords.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
For creation of routing policy entries for IPv6, the family must be
explicitly specified to 'ip'.
X-Gentoo-Bug: 385833
X-Gentoo-Bug-URL: https://bugs.gentoo.org/385833
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Fix minor shell typo that broke setting mtu on vlans.
X-Gentoo-Bug: 392971
X-Gentoo-Bug-URL: https://bugs.gentoo.org/392971
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
This patch was modified by William Hubbs <williamh@gentoo.org> to
document the new usage in net.example.
X-Gentoo-Bug: 394281
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=394281
Provide consistent methods using iproute2/ifconfig to check operational
and administrative up/down state of interfaces. This is not the same as
ethtool's "Link detected" field, which is the state of the layer 2
medium.
TODO: How to check operational state in BSD?
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The old ifenslave binary forcibly set new slave interface to down before
adding into the kernel, as a way of show it's version to the kernel. We
need to duplicate this so that the kernel doesn't think it's an old
ifenslave version using the bonding setup interface.
X-Gentoo-Bug: 391881
X-Gentoo-Bug-URL: https://bugs.gentoo.org/391881
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Thanks-to: Yun Zheng Hu <hu@fox-it.com>
Some variable references were written as $(foo), but the majority were
written as ${foo}. This commit changes all of the variable references
to using braces.
The tree contained many operating system specific Makefiles which were
being included in other Makefiles. This commit removes those and adds
the code to the makefiles which included them using make's conditional
processing.
X-Gentoo-Bug: 387441
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
Make sure the VLAN interfaces as well as its rules will be removed prior
to the actual/parent interface.
The VLAN configs are gone in vlan_post_stop() already so we have to use
vlan_pre_stop() instead.
Reported-by: Bernd Bednarz <bernd.bednarz@avira.com>
X-Gentoo-Bug: 380603
X-Gentoo-Bug-URL: https://bugs.gentoo.org/380603
iproute2_post_stop() does now check if the network interface still exist.
Reported-by: Yun Zheng Hu <hu@fox-it.com>
X-Gentoo-Bug: 379575
X-Gentoo-Bug-URL: https://bugs.gentoo.org/379575
ethtool.sh didn't reset the Internal Field Seperator (IFS) properly.
It now does, by storing the old IFS to OIFS, which will be used later
in the for loop.
It also fixes the "ethtool_ring_<if>" option.
Reported-by: Alois Schmid <alois.schmid@gmx.de>
X-Gentoo-Bug: 368525
X-Gentoo-Bug-URL: https://bugs.gentoo.org/368525
ARP replies may/do contain two MAC addresses when using iputils's
arping so we have to use the first one because it's always the "From"
address - which is what we want.
Thanks to Stefan Knoblich <s.knoblich@axsentis.de> for the fixed pattern.
Reported-by: cl@exomail.to
X-Gentoo-Bug: 379181
X-Gentoo-Bug-URL: https://bugs.gentoo.org/379181
This was originally to fix the fact that our code did not handle certain
orders of arguments in conversion, but it was easier to rewrite the
entire argument handling to support more options at the same time.
Now supports all options documented in the ip manpage, including the
IPv6-specific options that must be passed after the interface argument.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Reported-by: Tony Vroon <chainsaw@gentoo.org>
X-Gentoo-Bug: 366905
X-Gentoo-Bug-URL: https://bugs.gentoo.org/366905
We need to bring the link up ourselves after we've properly configured
the device. The common code tries to bring the link up itself, but it
does so before things are configured, and so it ends up failing.
When shutting down, we need to wait for the kernel to finish destroying
the interface. Otherwise, when doing a restart, openrc is quick enough
to tell the kernel to destroy things, but then start trying to bring it
back up before the kernel has finished.
X-Gentoo-Bug: 367467
X-Gentoo-Bug-URL: http://bugs.gentoo.org/367467
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Quite a bit of work happened in baselayout-1 on the ccwgroup module, but
seems it didn't make it into openrc. So forward port all the existing
code so we can work with more than just qeth and layer2 options.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This updates the udhcpc support to use busybox's udhcpc instead of the
stand alone version.
I would like to thank jackieku <kjackie@gmail.com> for assisting with
this update.
X-Gentoo-Bug: 205286
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=205286
- Add support for a global plug_timeout setting to match the
documentation.
- Update the documentation to also show per-interface configuration.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 359311
X-Gentoo-Bug-URL: http://bugs.gentoo.org/359311
Reported-by: Raffaello D. Di Napoli <fastijum@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Implement a consistent interface for changing ethtool parameters, as
suggested in bug 195479. All variable names are based on the long option
to ethtool to set each group of parameters. Multiple entries seperated
by newlines are permitted for variable values.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 195479
Tunnel modes ipip6 and ip6ip6 require an explicit family selection for
the ip tunnel call.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 347657
This replaces the vlan setup code that previously used the old vconfig
binary with a new implementation using the iproute2 interface.
vconfig does not handle many of the newer setups. No automatic migration
path is provided, as altering the configuration is non-trivial.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Written-by: Guillaume Castagnino <casta@xwing.info>
X-Gentoo-Bug: 346365
