During stop of an interface, if it has been removed already (eg
hotunplug), not existing is fine.
X-Gentoo-Bug: 395859
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395859
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Since commit 683a21b0a in Feburary 2011, iproute2 has been required for
new VLAN configuration. MACVLAN is also impossible to configure without
iproute2. However we did not check if iproute2 was actually in the
modules for a given interface, so it could end up hanging or giving
weird errors. Check for iproute2 before usage now.
X-Gentoo-Bug: 389437
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389437
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
We need to create interfaces of custom names before we can sucessfully
start them. To do this, we have to add tunnels during prestart instead
of start. Split up the ip6to4 script to do this, saving the computed
variables for use in start with the new service data commands.
X-Gentoo-Bug: 372575
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=372575
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Historically, we have tried to up interfaces before running preup, so
that the kernel setups up the device and makes things like ethtool work
(some hardware cannot be correct probed until then). However this ends
up breaking other hardware, so a variable has been introduced to allow
the up prior to preup to be disabled: up_before_preup_IFVAR=no
X-Gentoo-Bug: 389475
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389475
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Broadcast and IPv6 should not be used together. Do not try to set the
keyword for auto-generation of the broadcast address. If the user passes
a broadcast address for IPv6, throw an error.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Several of the optional flags were not being handled correctly, they
were being passed as values only, without the keyword before them.
Affected keywords: anycast, label, scope, valid_lft, preferred_lft
Also change the handling of keywords to a common setup now, making
broadcast and peer strings the same as the above keywords.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Currently, cgroups are still in development, so we are not setting them
up by default. However, this default will be changed in the future.
This commit message and patch were updated by
William Hubbs <williamh@gentoo.org>.
X-Gentoo-Bug: 395079
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395079
The linux kernel documentation suggests mounting a separate cgroup
hierarchy for each subsystem you want to control/monitor. This changes
the cgroups mounting code to do this.
For creation of routing policy entries for IPv6, the family must be
explicitly specified to 'ip'.
X-Gentoo-Bug: 385833
X-Gentoo-Bug-URL: https://bugs.gentoo.org/385833
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Fix minor shell typo that broke setting mtu on vlans.
X-Gentoo-Bug: 392971
X-Gentoo-Bug-URL: https://bugs.gentoo.org/392971
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
This patch was modified by William Hubbs <williamh@gentoo.org> to
document the new usage in net.example.
X-Gentoo-Bug: 394281
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=394281
Provide consistent methods using iproute2/ifconfig to check operational
and administrative up/down state of interfaces. This is not the same as
ethtool's "Link detected" field, which is the state of the layer 2
medium.
TODO: How to check operational state in BSD?
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The old ifenslave binary forcibly set new slave interface to down before
adding into the kernel, as a way of show it's version to the kernel. We
need to duplicate this so that the kernel doesn't think it's an old
ifenslave version using the bonding setup interface.
X-Gentoo-Bug: 391881
X-Gentoo-Bug-URL: https://bugs.gentoo.org/391881
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Thanks-to: Yun Zheng Hu <hu@fox-it.com>
This is needed to allow auto-connect at boot.
Reported-by: David J Cozatt <ygdrasil@comcast.net>
X-Gentoo-Bug: 390955
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=390955
A variable used in the previous commit was actually removed in another
commit; that is why I didn't catch it.
Reported-by: Duncan < 1i5t5.duncan@cox.net>
X-Gentoo-Bug: 394369
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=394369
The migrate-run service was hanging when parallel startup was enabled
because of its dependencies. This integrates the logic for this service
into bootmisc, which will avoid the issues with parallel startup.
I would like to thank Robin H. Johnson <robbat2@gentoo.org> for his
input on this patch
rc_parallel has never been considered a stable feature of openrc. To
that end, I am removing the documentation for this feature from
rc.conf.
It is still available, but bugs against it are not considered stable
blockers, and it should only be used currently by developers and users
who are willing to test the feature.
X-Gentoo-Bug: 391945
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=391945
Previous commit e3b39a677b missed adding a "[" to one of the tests.
Reported-by: Torsten Veller <tove@gentoo.org>
x-Gentoo-Bug: 391941
x-Gentoo-Bug-URL: http://bugs.gentoo.org/391941
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Openrc will create a cgroup hierarchy called openrc which will have all
services it starts and all subsystems attached to it. If you need other
groups/hierarchies, please use libcgroup.
The kernel documentation states that a cgroup file system should not be
mounted here, but a tmpfs.
This also means that we should not create a group for each process, but
we should allow the user to specify which group a process should be
assigned to. The rc_cgroup variable will be used for this purpose.
For more information, see /usr/src/linux/Documentation/cgroups/cgroups.txt.
The MKSTATICLIBS switch, which defaults to yes, controls whether or not
static libraries are built and installed.
Reported-by: Agostino Sarubbo <ago@autistici.org>
x-Gentoo-Bug: 378267
x-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=378267
When a CGroup is created, we need to copy cpuset.cpus and cpuset.mems
from the new group's parent into the new group before we can attach any
processes to it.
