The clock services had a very long list of "before" dependencies that
referred to other services within OpenRC. For ease of maintenance,
convert these to "after clock" dependencies in the individual services.
Using wildcards in dependencies causes issues when rc_parallel is set to
yes because it can lead to deadlocks.
All dependencies need to be explicit rather than implicit.
This is the first stage of moving this direction.
Since we check for /sys/firmware/efi/efivars, we do not need to check
for /sys/firmware/efi
Since Failing to mount efivarfs is not critical, we silence the error
message from mount.
My understanding is that the kernel can autoload this module. If it
doesn't, the module should be built in or loaded from an initramfs.
This fixes https://github.com/openrc/openrc/pulls/112.
- switch from attempting to ping the default gateway to a host outside
the local network, defaulting to google.com.
- along with this, change the name of the variable that requests a ping
test to include_ping_test so the meaning is more clear.
Now that we respect the module blacklists, don't print every module we
try to load, because it might not end up loaded due to the blacklist,
and modprobe doesn't consider that a failure.
The /etc/init.d/localmount script has a syntax error that causes it to
attempt to mount remote filesystems, causing the boot to fail. The
script appends a "no" to each remote filesystem type, but it should only
be append the "no" to the beginning of the list. This patch fixes
localmount on FreeBSD 12.0. A review of the mount(8) manpage on Ubuntu
12.04 suggests that this patch is correct for Linux, too.
Busybox does not support the 'scope' argument on 'ip address add' or 'ip
route add', this is documented in BUSYBOX.md, but is no longer actually
needed, as the kernel does get it right without manual specification,
and the ifconfig variant already relies on the kernel to get it right.
This is part of #103.
X-Gentoo-Bug: 487208
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487208
Separate loading the module, if it isn't built in or loaded, from
mounting the file system.
This also makes sure the warning about configuring the module in
/etc/conf.d/modules or building it in is displayed only if it is loaded
successfully.
X-Gentoo-Bug: 595836
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=595836
The $RC_UNAME "Linux" had been misspelled as "linux".
As a consequence, entries in e.g. /etc/modules-load.d failed to
load any module succesfully under Linux(!)
In the hwclock, procfs and sysfs service scripts, we automatically
attempt to load the kernel modules we need before we take any action. We
shouldn't do this, because there are systems which do not use kernel
modules and do not have the kmod package installed.
With this change, we continue to load the modules ourselves, but we warn
the admin that they need to be added to /etc/conf.d/modules or built
into the kernel.
In the future, this automatic loading will be dropped.
X-Gentoo-Bug: 342313
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=342313
We had separate sysctl scripts for each operating system. However, there
is no need to do this since we can detect the operating system at
runtime with $RC_UNAME.
When we use the --utc or --localtime switch, also use --noadjfile if it
is available. This means hwclock will not use a drift file.
X-Gentoo-Bug: 584722
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=584722
In previous releases, we either treated no mount points as critical or
all of them.
Now both localmount and netmount support a critical_mounts setting. If
mount points listed in this setting fail to mount, localmount and
netmount will fail.
Before this commit, on Linux, we were always trying to mount file
systems marked with _netdev, even when the previous mount command
failed. Now, we do not run the second mount if the first fails.
X-Gentoo-Bug: 579876
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=579876
Netifrc is no longer part of OpenRC, so we shouldn't save its dep tree
as part of savecache.
This should have been removed when netifrc was split out. also, it
might be related to the following bug.
X-Gentoo-Bug: 563720
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=563720
In the past, OpenRC was a hybrid of a centralized and file-scope
license/copyright structure.
I followed the instructions from the Software Freedom Law Center [1] to
convert to a Centralized structure where possible, for easier future
maintenance.
[1] https://softwarefreedom.org/resources/2012/ManagingCopyrightInformation.html
add in parsing of fstab to determine if nfsclient should be automatically
started so that netmount can mount nfs without adding nfsclient
to the default runlevel
This fixes#71.
This advises users to remove mtab from their runlevels if /etc/mtab is a
symlink, and it creates the symlink if /etc/mtab does not exist on a
system.
X-Gentoo-Bug: 560060
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=560060
The following return codes are returned by mount -a:
0: all file systems mounted.
32: no file systems mounted.
64: some file systems mounted.
The localmount/netmount services should fail if all file systems that
should mount did not mount.
This adds the -systemd-nspawn keyword to service scripts which are not
intended to run in systemd-nspawn containers.
This fixes#52.
X-Gentoo-Bug: 548058
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=548058
This changes the mtab service in the following way:
- If /etc/mtab is a symbolic link, success is returned.
- If /etc is not writable, we warn that we could not update /etc/mtab
and return success.
- If /etc/mtab does not exist, we create a symbolic link from
/etc/mtab to /proc/self/mounts.
- Otherwise, we warn that updating /etc/mtab as a file is
deprecated and continue to update it after outputting instructions to
the user for how to move it to a symbolic link.
The cache directory should be created via mkdir -p instead of
mkdir. This makes sure all parent directories are created.
Also, we now display an error message explaining that we were unable to
create the cache directory if creation fails.
We were originally checking to see if $RC_LIBEXECDIR/cache was writable. For
a new install, this check will fail since this path does not exist. This
is also incorrect because later we create $RC_LIBEXECDIR/cache.
The correct check is checkpath -W $RC_LIBEXECDIR, and this fixes the
issue.
X-Gentoo-Bug: 544632
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=544632
This makes binfmt processing behave like tmpfiles processing which
follows the same specification as systemd.
This fixes#48.
X-Gentoo-Bug: 545162
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=545162
It appears that the only reason we were force loading the usbcore
module was to facilitate mounting usbfs. Since we no longer mount
usbfs, this is no longer necessary.
X-Gentoo-Bug: 480312
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=480312
The usbfs and usbdevfs file systems have been deprecated since
Linux-2.6.32, so we remove the code to automount them.
X-Gentoo-Bug: 480312
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=480312
The selinux file system is mounted under /sys, so move the code for it
to the appropriate service.
X-Gentoo-Bug: 546290
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=546290
The local service should use eval when it executes scripts since it has
the redirection set up in a variable.
This fixes#50.
X-Gentoo-Bug: 545012
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=545012
checkpath -W can fail if the specified path doesn't actually exist yet.
In this case savecache script should attempt to create the path if it is
missing, however it is pre-empted by the checkpath call. This patch adds
an explicit existence test before executing checkpath.
This fixes#36.
If /tmp or / are read-only, the clean_run function can fail in some very
bad ways.
1. dir=$(mktemp -d) returns an EMPTY string on error.
2. "mount -o bind / $dir", and don't check the result of that,
3. "rm -rf $dir/run/*", which removes the REAL /run contents
4. box gets very weird from this point forward
Signed-Off-By: Robin H. Johnson <robbat2@gentoo.org>
Signed-Off-By: Chip Parker <infowolfe@gmail.com>
Reported-by: Chip Parker <infowolfe@gmail.com>
Tested-by: Chip Parker <infowolfe@gmail.com>
The local service now redirects stdout and stderr for the scripts it
runs to /dev/null unless it is run in verbose mode.
X-Gentoo-Bug: 537444
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=537444
