# Messages français de procps-ng
# Copyright (C) 2021 Free Software Foundation, Inc.
# This file is distributed under the same license as the procps-ng package.
# Frédéric Marchal <fmarchal@perso.be>, 2014.
# Stéphane Aulery <lkppo@free.fr>, 2015
# Frédéric Marchal <fmarchal@perso.be>, 2021.
#
# La qualité de cette traduction est vraiment très mauvaise car:
# 1) la mise en forme des messages impose des contraintes insensées: traduire
#    en deux lettres les mots wait, idle, swap, running, sleeping ou en cinq
#    lettres le mot « disk » (liste non exhaustive);
# 2) les messages utilisent un jargon technique qui n'a pas d'équivalent suffisament
#    explicite en français pour être abrégé: le concis « swap size » devient
#    « taille de la partition d'échange », « renice » devient l'horible « change la
#    courtoisie » ou « pages paged in » devient « pages lues depuis le disque »;
# 3) certains messages contiennent des mots de une ou deux lettres dont je n'ai
#    pas su trouver la signification, même avec le code source.
# Bref, j'abandonne la traduction après six mois de recherches et j'attends que les
# utilisateurs hurlent et me proposent des correcions.
#
#                                                     Frédéric Marchal
msgid ""
msgstr ""
"Project-Id-Version: procps-ng 3.3.17rc1\n"
"Report-Msgid-Bugs-To: procps@freelists.org\n"
"POT-Creation-Date: 2022-03-21 21:40+1100\n"
"PO-Revision-Date: 2021-01-22 12:01+0100\n"
"Last-Translator: Frédéric Marchal <fmarchal@perso.be>\n"
"Language-Team: French <traduc@traduc.org>\n"
"Language: fr\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=2; plural=(n >= 2);\n"

#: free.c:76 slabtop.c:104 uptime.c:61
#, c-format
msgid " %s [options]\n"
msgstr " %s [options]\n"

#: free.c:78
msgid " -b, --bytes         show output in bytes\n"
msgstr " -b, --bytes         afficher la sortie en octets\n"

#: free.c:79
msgid "     --kilo          show output in kilobytes\n"
msgstr "     --kilo          afficher la sortie en kilooctets\n"

#: free.c:80
msgid "     --mega          show output in megabytes\n"
msgstr "     --mega          afficher la sortie en mégaoctets\n"

#: free.c:81
msgid "     --giga          show output in gigabytes\n"
msgstr "     --giga          afficher la sortie en gigaoctets\n"

#: free.c:82
msgid "     --tera          show output in terabytes\n"
msgstr "     --tera          afficher la sortie en téraoctets\n"

#: free.c:83
msgid "     --peta          show output in petabytes\n"
msgstr "     --peta          afficher la sortie en pétaoctets\n"

#: free.c:84
msgid " -k, --kibi          show output in kibibytes\n"
msgstr " -k, --kibi          afficher la sortie en kibioctets\n"

#: free.c:85
msgid " -m, --mebi          show output in mebibytes\n"
msgstr " -m, --mebi          afficher la sortie en mébioctets\n"

#: free.c:86
msgid " -g, --gibi          show output in gibibytes\n"
msgstr " -g, --gibi          afficher la sortie en gibioctets\n"

#: free.c:87
msgid "     --tebi          show output in tebibytes\n"
msgstr "     --tebi          afficher la sortie en tébioctets\n"

#: free.c:88
msgid "     --pebi          show output in pebibytes\n"
msgstr "     --pebi          afficher la sortie en pébioctets\n"

#: free.c:89
msgid " -h, --human         show human-readable output\n"
msgstr ""
" -h, --human         afficher la sortie sous forme lisible par un humain\n"

#: free.c:90
msgid "     --si            use powers of 1000 not 1024\n"
msgstr "     --si            utiliser des puissances de 1000 au lieu de 1024\n"

#: free.c:91
msgid " -l, --lohi          show detailed low and high memory statistics\n"
msgstr ""
" -l, --lohi          afficher des statistiques détaillées pour les mémoires "
"basse et haute\n"

#: free.c:92
msgid " -t, --total         show total for RAM + swap\n"
msgstr " -t, --total         afficher le total de la RAM + swap\n"

#: free.c:93
msgid " -v, --committed     show committed memory and commit limit\n"
msgstr ""

#: free.c:94
msgid " -s N, --seconds N   repeat printing every N seconds\n"
msgstr " -s N, --seconds N   répéter l'affichage toutes les N secondes\n"

#: free.c:95
msgid " -c N, --count N     repeat printing N times, then exit\n"
msgstr " -c N, --count N     répéter l'affichage N fois puis termine\n"

#: free.c:96
msgid " -w, --wide          wide output\n"
msgstr " -w, --wide          sortie large\n"

#: free.c:98 w.c:533
msgid "     --help     display this help and exit\n"
msgstr "     --help     afficher cette aide et termine\n"

#: free.c:173
#, fuzzy
msgid "Multiple unit options don't make sense."
msgstr "Des options d'unités multiples n'ont aucun sens."

#: free.c:338
#, c-format
msgid "seconds argument `%s' is not positive number"
msgstr "l'argument des secondes « %s » n'est pas un nombre positif"

#: free.c:344
msgid "failed to parse count argument"
msgstr "l'argument du nombre de répétitions ne peut pas être décodé"

#: free.c:347
#, c-format
msgid "failed to parse count argument: '%s'"
msgstr "échec du décodage de l'argument du nombre de répétitions: « %s »"

#: free.c:365 vmstat.c:382 vmstat.c:869
#, fuzzy
msgid "Unable to create meminfo structure"
msgstr "impossible de créer les tubes IPC"

#: free.c:371
#, fuzzy, c-format
msgid ""
"               total        used        free      shared     buffers       "
"cache   available"
msgstr ""
"               total       utilisé      libre     partagé    tampons       "
"cache   disponible"

#: free.c:373
#, fuzzy, c-format
msgid ""
"               total        used        free      shared  buff/cache   "
"available"
msgstr ""
"               total       utilisé      libre     partagé tamp/cache   "
"disponible"

#: free.c:376
msgid "Mem:"
msgstr "Mem:"

#: free.c:399
msgid "Low:"
msgstr "Basse:"

#: free.c:405
msgid "High:"
msgstr "Haute:"

#: free.c:412
msgid "Swap:"
msgstr "Partition d'échange:"

#: free.c:419
msgid "Total:"
msgstr "Total:"

#: free.c:432
msgid "Comm:"
msgstr ""

#: kill.c:38
#, c-format
msgid " %s [options] <pid> [...]\n"
msgstr " %s [options] <pid> […]\n"

#: kill.c:40
msgid " <pid> [...]            send signal to every <pid> listed\n"
msgstr " <pid> […]              envoie le signal à chaque <pid> listé\n"

#: kill.c:41
msgid ""
" -<signal>, -s, --signal <signal>\n"
"                        specify the <signal> to be sent\n"
msgstr ""
" -<signal>, -s, --signal <signal>\n"
"                        spécifier le <signal> à envoyer\n"

#: kill.c:43
msgid " -q, --queue <value>    integer value to be sent with the signal\n"
msgstr " -q, --queue <valeur>   valeur entière à envoyer avec le signal\n"

#: kill.c:44
msgid ""
" -l, --list=[<signal>]  list all signal names, or convert one to a name\n"
msgstr ""
" -l, --list=[<signal>]  liste tous les noms de signaux ou en converti un en "
"son nom\n"

#: kill.c:45
msgid " -L, --table            list all signal names in a nice table\n"
msgstr ""
" -L, --table            liste tous les noms de signaux dans une belle table\n"

#: kill.c:110
#, c-format
msgid "unknown signal name %s"
msgstr "nom de signal %s inconnu"

#: kill.c:129
msgid "must be an integer value to be passed with the signal."
msgstr "doit être une valeur entière passée avec le signal."

#: kill.c:134
#, c-format
msgid "invalid argument %c"
msgstr "argument %c invalide"

#: kill.c:144 pgrep.c:692 pidof.c:243 pidof.c:283 sysctl.c:853
msgid "internal error"
msgstr "erreur interne"

#: kill.c:156 pmap.c:760 pmap.c:775 skill.c:375 skill.c:459 tload.c:135
#: tload.c:140 vmstat.c:1044 vmstat.c:1054 watch.c:853
msgid "failed to parse argument"
msgstr "échec de l'analyse de l'argument"

#: lib/fileutils.c:38
msgid "write error"
msgstr "erreur d'écriture"

#: pgrep.c:85 pidof.c:37 skill.c:70
msgid "integer overflow"
msgstr "débordement d'entier"

#: pgrep.c:146
#, c-format
msgid " %s [options] <pattern>\n"
msgstr "%s [options] <motif>\n"

#: pgrep.c:150
msgid " -d, --delimiter <string>  specify output delimiter\n"
msgstr " -d, --delimiter <chaîne> désigne le délimiteur de sortie\n"

#: pgrep.c:151
msgid " -l, --list-name           list PID and process name\n"
msgstr " -l, --list-name           liste le PID et le nom du processus\n"

#: pgrep.c:152
msgid " -a, --list-full           list PID and full command line\n"
msgstr ""
" -a, --list-full           liste le PID et la ligne de commande complète\n"

#: pgrep.c:153
msgid " -v, --inverse             negates the matching\n"
msgstr " -v, --inverse             inverse le sens de la correspondance\n"

#: pgrep.c:154
msgid " -w, --lightweight         list all TID\n"
msgstr " -w, --lightweight         liste tous les TID\n"

#: pgrep.c:157
msgid " -<sig>, --signal <sig>    signal to send (either number or name)\n"
msgstr ""
" -<sig>, --signal <sig>    signal à envoyer (<sig> est le numéro ou le nom "
"du signal)\n"

#: pgrep.c:158
msgid " -q, --queue <value>       integer value to be sent with the signal\n"
msgstr " -q, --queue <valeur>      valeur entière à envoyer avec le signal\n"

#: pgrep.c:159
msgid " -e, --echo                display what is killed\n"
msgstr " -e, --echo                affiche ce qui est tué\n"

#: pgrep.c:162
msgid " -e, --echo                display PIDs before waiting\n"
msgstr " -e, --echo                affiche les PID avant l'attente\n"

#: pgrep.c:166
msgid " -c, --count               count of matching processes\n"
msgstr " -c, --count               compte les processus correspondants\n"

#: pgrep.c:167
msgid " -f, --full                use full process name to match\n"
msgstr ""
" -f, --full                correspondance sur le nom complet du processus\n"

#: pgrep.c:168
msgid " -g, --pgroup <PGID,...>   match listed process group IDs\n"
msgstr ""
" -g, --pgroup <PGID,…>     affiche les ID de groupe des processus listés\n"

#: pgrep.c:169
msgid " -G, --group <GID,...>     match real group IDs\n"
msgstr " -G, --group <GID,…>       correspondance sur le ID de groupe réel\n"

#: pgrep.c:170
msgid " -i, --ignore-case         match case insensitively\n"
msgstr " -i, --ignore-case         correspondance insensible à la casse\n"

#: pgrep.c:171
msgid " -n, --newest              select most recently started\n"
msgstr " -n, --newest              sélectionne le plus récemment démarré\n"

#: pgrep.c:172
msgid " -o, --oldest              select least recently started\n"
msgstr " -o, --oldest              sélectionne le moins récemment démarré\n"

#: pgrep.c:173
msgid " -O, --older <seconds>     select where older than seconds\n"
msgstr " -O, --older <secondes>    sélectionne ceux plus vieux que secondes\n"

#: pgrep.c:174
msgid ""
" -P, --parent <PPID,...>   match only child processes of the given parent\n"
msgstr ""
" -P, --parent <PPID,…>     correspondance parmi les processus enfants du "
"parent donné\n"

#: pgrep.c:175
msgid " -s, --session <SID,...>   match session IDs\n"
msgstr " -s, --session <SID,…>     correspondance sur le ID de session\n"

#: pgrep.c:176
msgid " -t, --terminal <tty,...>  match by controlling terminal\n"
msgstr " -t, --terminal <tty,…>    correspondance sur le terminal contrôlant\n"

#: pgrep.c:177
msgid " -u, --euid <ID,...>       match by effective IDs\n"
msgstr " -u, --euid <ID,…>         correspondance sur le ID effectif\n"

#: pgrep.c:178
msgid " -U, --uid <ID,...>        match by real IDs\n"
msgstr " -U, --uid <ID,…>          correspondance sur le ID réel\n"

#: pgrep.c:179
msgid " -x, --exact               match exactly with the command name\n"
msgstr ""
" -x, --exact               correspondance exacte avec le nom de la commande\n"

#: pgrep.c:180
msgid " -F, --pidfile <file>      read PIDs from file\n"
msgstr " -F, --pidfile <fichier>   lit les PID depuis le fichier\n"

#: pgrep.c:181
msgid " -L, --logpidfile          fail if PID file is not locked\n"
msgstr ""
" -L, --logpidfile          échoue si le fichier PID n'est pas verrouillé\n"

#: pgrep.c:182
msgid " -r, --runstates <state>   match runstates [D,S,Z,...]\n"
msgstr ""
" -r, --runstates <état>    correspond aux états d'exécution [D,S,Z,…]\n"

#: pgrep.c:183
#, fuzzy
msgid " --cgroup <grp,...>        match by cgroup v2 names\n"
msgstr " -G, --group <GID,…>       correspondance sur le ID de groupe réel\n"

#: pgrep.c:184
msgid ""
" --ns <PID>                match the processes that belong to the same\n"
"                           namespace as <pid>\n"
msgstr ""
" --ns <PID>                fait correspondre les processus qui "
"appartiennent\n"
"                           au même espace de nom que <pid>\n"

#: pgrep.c:186
msgid ""
" --nslist <ns,...>         list which namespaces will be considered for\n"
"                           the --ns option.\n"
"                           Available namespaces: ipc, mnt, net, pid, user, "
"uts\n"
msgstr ""
" --nslist <ns,…>           liste les espaces de noms qui seront acceptés "
"par\n"
"                           l'option --ns.\n"
"                           Espaces de noms disponibles: ipc, mnt, net, pid, "
"user, uts\n"

#: pgrep.c:331
#, c-format
msgid "invalid user name: %s"
msgstr "nom d'utilisateur invalide: %s"

#: pgrep.c:348
#, c-format
msgid "invalid group name: %s"
msgstr "nom de groupe invalide: %s"

#: pgrep.c:359
#, c-format
msgid "invalid process group: %s"
msgstr "groupe de processus invalide: %s"

#: pgrep.c:371
#, c-format
msgid "invalid session id: %s"
msgstr "ID de session invalide: %s"

#: pgrep.c:383
#, c-format
msgid "not a number: %s"
msgstr "pas un nombre: %s"

#: pgrep.c:450 skill.c:158
#, fuzzy
msgid "Unable to read process namespace information"
msgstr ""
"erreur lors de la lecture de l'information de l'espace de nom de référence"

#: pgrep.c:537
#, fuzzy, c-format
msgid "regex error: %s"
msgstr "erreur: %s\n"

#: pgrep.c:599
msgid "Error reading reference namespace information\n"
msgstr ""
"Erreur lors de la lecture des informations de l'espace de nom de référence\n"

#: pgrep.c:604 w.c:405
#, fuzzy
msgid "Unable to create pid info structure"
msgstr "impossible de créer les tubes IPC"

#: pgrep.c:709
#, c-format
msgid ""
"pattern that searches for process name longer than 15 characters will result "
"in zero matches\n"
"Try `%s -f' option to match against the complete command line."
msgstr ""
"un motif qui cherche un nom de processus plus long que 15 caractères ne "
"retournera aucun résultat\n"
"Essayez l'option « %s -f » pour obtenir une correspondance sur la ligne de "
"commande complète."

#: pgrep.c:973
#, c-format
msgid ""
"-L without -F makes no sense\n"
"Try `%s --help' for more information."
msgstr ""
"-L sans -F n'a pas de sens\n"
"Essayez « %s --help » pour plus d'informations."

#: pgrep.c:980
#, c-format
msgid ""
"pidfile not valid\n"
"Try `%s --help' for more information."
msgstr ""
"fichier pid pas valable\n"
"Essayez « %s --help » pour plus d'informations."

#: pgrep.c:989
#, c-format
msgid ""
"only one pattern can be provided\n"
"Try `%s --help' for more information."
msgstr ""
"fournissez un seul motif à la fois\n"
"Essayez « %s --help » pour plus d'informations."

#: pgrep.c:993
#, c-format
msgid ""
"no matching criteria specified\n"
"Try `%s --help' for more information."
msgstr ""
"aucun critère correspondant spécifié\n"
"Essayez « %s --help » pour plus d'informations."

#: pgrep.c:1045
#, c-format
msgid "%s killed (pid %lu)\n"
msgstr "%s tué (pid %lu)\n"

#: pgrep.c:1052
#, c-format
msgid "killing pid %ld failed"
msgstr "le pid %ld n'a pu être tué"

#: pgrep.c:1064
#, c-format
msgid "waiting for %s (pid %lu)\n"
msgstr "attente de %s (pid %lu)\n"

#: pgrep.c:1069
#, c-format
msgid "opening pid %ld failed"
msgstr "l'ouverture du pid %ld a échoué"

#: pgrep.c:1083
msgid "epoll_wait failed"
msgstr "epoll_wait a échoué"

#: pidof.c:71
#, c-format
msgid " %s [options] [program [...]]\n"
msgstr " %s [options] [programme […]]\n"

#: pidof.c:73
msgid " -s, --single-shot         return one PID only\n"
msgstr " -s, --single-shot         retourne un seul PID\n"

#: pidof.c:74
msgid " -c, --check-root          omit processes with different root\n"
msgstr ""
" -c, --check-root          omet les processus avec des racines différentes\n"

#: pidof.c:75
msgid " -q,                       quiet mode, only set the exit code\n"
msgstr ""
" -q                        mode silencieux, retourne uniquement un code de "
"sortie\n"

#: pidof.c:76
msgid " -w, --with-workers        show kernel workers too\n"
msgstr " -w, --with-workers        montre aussi les « workers » du noyau\n"

#: pidof.c:77
msgid " -x                        also find shells running the named scripts\n"
msgstr ""
" -x                        trouve aussi les shells exécutant les scripts "
"nommés\n"

#: pidof.c:78
msgid " -o, --omit-pid <PID,...>  omit processes with PID\n"
msgstr " -o, --omit-pid <PID,…>    omet les processus avec ce PID\n"

#: pidof.c:79
msgid " -S, --separator SEP       use SEP as separator put between PIDs"
msgstr " -S, --separator SEP       place le séparateur SEP entre les PID"

#: pidof.c:286
#, c-format
msgid "illegal omit pid value (%s)!\n"
msgstr "valeur de pid à omettre invalide (%s) !\n"

#: pmap.c:68
msgid "Address"
msgstr "Adresse"

#: pmap.c:69
msgid "Offset"
msgstr "Décalage"

#: pmap.c:70
msgid "Device"
msgstr "Périphérique"

#: pmap.c:71
msgid "Mapping"
msgstr "Carte"

#: pmap.c:75
msgid "Perm"
msgstr "Perm"

#: pmap.c:76
msgid "Inode"
msgstr "Inode"

#: pmap.c:79
msgid "Kbytes"
msgstr "kilo-octets"

#: pmap.c:80
msgid "Mode"
msgstr "Mode"

#. Translation Hint: With the next 5 fields, notice how an extra space
#. has been added ahead of one 'KiB' so that they all
#. align. You need not preserve such alignment.
#. Translation Hint: maximum 'RSS' = 6
#: pmap.c:81 top/top_nls.c:318
msgid "RSS"
msgstr "RSS"

#: pmap.c:82
msgid "Dirty"
msgstr "Modifié"

#: pmap.c:116
#, c-format
msgid " %s [options] PID [PID ...]\n"
msgstr " %s [options] PID [PID …]\n"

#: pmap.c:118
msgid " -x, --extended              show details\n"
msgstr " -x, --extended              montre les détails\n"

#: pmap.c:119
msgid " -X                          show even more details\n"
msgstr " -X                          montre plus de détails\n"

#: pmap.c:120
msgid "            WARNING: format changes according to /proc/PID/smaps\n"
msgstr "            ATTENTION: le format change selon /proc/PID/smaps\n"

#: pmap.c:121
msgid " -XX                         show everything the kernel provides\n"
msgstr " -XX                         montre tout ce que le kernel fournis\n"

#: pmap.c:122
msgid " -c, --read-rc               read the default rc\n"
msgstr " -c, --read-rc               lit le rc par défaut\n"

#: pmap.c:123
msgid " -C, --read-rc-from=<file>   read the rc from file\n"
msgstr " -C, --read-rc-from=<fichier> lit le rc dans le fichier\n"

#: pmap.c:124
msgid " -n, --create-rc             create new default rc\n"
msgstr " -n, --create-rc             crée un nouveau rc par défaut\n"

#: pmap.c:125
msgid " -N, --create-rc-to=<file>   create new rc to file\n"
msgstr " -N, --create-rc-to=<fichier> crée un nouveau rc dans le fichier\n"

#: pmap.c:126
msgid "            NOTE: pid arguments are not allowed with -n, -N\n"
msgstr ""
"            NOTE: un pid n'est pas accepté comme argument avec -n, -N\n"

#: pmap.c:127
msgid " -d, --device                show the device format\n"
msgstr " -d, --device                montre le format du périphérique\n"

#: pmap.c:128
msgid " -q, --quiet                 do not display header and footer\n"
msgstr ""
" -q, --quiet                 n'affiche pas l'en-tête ni le pied de page\n"

#: pmap.c:129
msgid " -p, --show-path             show path in the mapping\n"
msgstr " -p, --show-path             montre le chemin dans la carte\n"

#: pmap.c:130
msgid " -A, --range=<low>[,<high>]  limit results to the given range\n"
msgstr ""
" -A, --range=<min>[,<max>]   limite les résultats à l'intervalle donné\n"

#: pmap.c:207
msgid "shared memory detach"
msgstr "détacher mémoire partagée"

#: pmap.c:211
msgid "shared memory remove"
msgstr "retirer mémoire partagée"

#: pmap.c:236
msgid "  [ anon ]"
msgstr "  [ anon ]"

#: pmap.c:239
msgid "  [ stack ]"
msgstr "  [ pile  ]"

#: pmap.c:325 pmap.c:331
msgid "Unknown format in smaps file!"
msgstr "Format inconnu dans le fichier smaps !"

#: pmap.c:356
#, fuzzy
msgid "ERROR: memory allocation failed"
msgstr "l'allocation de mémoire a échoué"

#: pmap.c:373
msgid "inconsistent detail field in smaps file, line:\n"
msgstr "champ de détail inconsistant dans le fichier smaps à la ligne:\n"

#: pmap.c:720
msgid "total kB"
msgstr "ko total"

#: pmap.c:731
#, c-format
msgid "mapped: %ldK    writeable/private: %ldK    shared: %ldK\n"
msgstr "mappé: %ldK     inscriptible/privé: %ldK   partagé: %ldK\n"

#. Translation Hint: keep total string length
#. * as 24 characters. Adjust %16 if needed
#: pmap.c:740
#, c-format
msgid " total %16ldK\n"
msgstr " total %16ldK\n"

#. Translation Hint: keep total string length
#. * as 16 characters. Adjust %8 if needed
#: pmap.c:746
#, c-format
msgid " total %8ldK\n"
msgstr " total %8ldK\n"

#: pmap.c:821
#, c-format
msgid "config line too long - line %d"
msgstr "ligne de configuration trop longue – ligne %d"

#: pmap.c:846
#, c-format
msgid "unsupported section found in the config - line %d"
msgstr "section non supportée dans la config – ligne %d"

#: pmap.c:849 pmap.c:860 pmap.c:871 pmap.c:890 pmap.c:902
#, c-format
msgid "syntax error found in the config - line %d"
msgstr "erreur de syntaxe dans la config – ligne %d"

#: pmap.c:924
msgid "the file already exists - delete or rename it first"
msgstr "le fichier existe déjà – effacez ou renommez-le d'abord"

#: pmap.c:987
msgid "HOME variable undefined"
msgstr "variable HOME non définie"

#: pmap.c:995
msgid "memory allocation failed"
msgstr "l'allocation de mémoire a échoué"

#: pmap.c:1046
msgid "option -r is ignored as SunOS compatibility"
msgstr "l'option -r est ignorée par compatibilité avec SunOS"

#: pmap.c:1093
msgid "options -c, -C, -d, -n, -N, -x, -X are mutually exclusive"
msgstr "les options -c, -C, -d, -n, -N, -x, -X sont mutuellement exclusives"

#: pmap.c:1096
msgid "options -p, -q are mutually exclusive with -n, -N"
msgstr "les options -p et -q sont exclues avec -n et -N"

#: pmap.c:1099 pmap.c:1148
msgid "too many arguments"
msgstr "trop d'arguments"

#: pmap.c:1103
msgid "rc file successfully created, feel free to edit the content"
msgstr "fichier rc créé avec succès, vous pouvez éditer son contenu"

#: pmap.c:1106
msgid "couldn't create the rc file"
msgstr "le fichier rc n'a pu être créé"

#: pmap.c:1118
#, c-format
msgid "~/.%src file successfully created, feel free to edit the content"
msgstr "fichier ~/.%src créé, vous pouvez éditer son contenu"

#: pmap.c:1121
#, c-format
msgid "couldn't create ~/.%src"
msgstr "n'a pu créer ~/.%src"

#: pmap.c:1126
msgid "argument missing"
msgstr "argument manquant"

#: pmap.c:1139
msgid "couldn't read the rc file"
msgstr "le fichier rc n'a pu être lu"

#: pmap.c:1141
#, c-format
msgid "couldn't read ~/.%src"
msgstr "n'a pu lire ~/.%src"

#: pmap.c:1150 pmap.c:1175
msgid "library failed pids statistics"
msgstr ""

#: ps/display.c:54
#, c-format
msgid "Signal %d (%s) caught by %s (%s).\n"
msgstr "Signal %d (%s) intercepté par %s (%s).\n"

#: ps/display.c:66 ps/display.c:243 ps/display.c:395 ps/output.c:2316
#: ps/parser.c:495 ps/parser.c:742 ps/select.c:92 ps/sortformat.c:261
#: ps/sortformat.c:299 ps/sortformat.c:548
msgid "please report this bug"
msgstr "merci de rapporter ce bug"

#: ps/display.c:303 ps/display.c:472
#, c-format
msgid "fatal library error, reap\n"
msgstr ""

#: ps/display.c:353
#, c-format
msgid "could not find ppid\n"
msgstr "n'a pu trouver le ppid\n"

#: ps/display.c:363
#, c-format
msgid "could not find start_time\n"
msgstr "n'a pu trouver start_time\n"

#: ps/global.c:279
#, c-format
msgid "your %dx%d screen size is bogus. expect trouble\n"
msgstr "votre taille d'écran %dx%d est fausse. Attendez-vous à des problèmes\n"

#: ps/global.c:352 ps/global.c:364
msgid "environment specified an unknown personality"
msgstr "l'environnement a spécifié une personnalité inconnue"

#: ps/global.c:356
#, c-format
msgid "cannot strdup() personality text\n"
msgstr "le texte de la personnalité ne peut être dupliqué avec strdup()\n"

#: ps/global.c:487
#, c-format
msgid "fatal library error, context\n"
msgstr ""

#: ps/global.c:495
#, c-format
msgid "fatal library error, lookup self\n"
msgstr ""

#. Translation Note:
#. . The following translatable word will be used to recognize the
#. . user's request for help text.  In other words, the translation
#. . you provide will alter program behavior.
#. .
#. . It must be limited to 15 characters or less.
#.
#: ps/global.c:534
msgid "help"
msgstr "aide"

#. Translation Notes for ps Help #1 ---------------------------------
#. .  This next group of lines represents 6 pairs of words + abbreviations
#. .  which are the basis of the 'ps' program help text.
#. .
#. .  The words and abbreviations you provide will alter program behavior.
#. .  They will also appear in the help usage summary associated with the
#. .  "Notes for ps Help #2" below.
#. .
#. .  In their English form, help text would look like this:
#. .      Try 'ps --help <simple|list|output|threads|misc|all>'
#. .       or 'ps --help <s|l|o|t|m|a>'
#. .      for additional help text.
#. .
#. .  When translating these 6 pairs you may choose any appropriate
#. .  language equivalents and the only requirement is the abbreviated
#. .  representations must be unique.
#. .
#. .  By default, those abbreviations are single characters.  However,
#. .  they are not limited to only one character after translation.
#. .
#. Translation Hint, Pair #1
#: ps/help.c:63
msgid "simple"
msgstr "simple"

#: ps/help.c:63
msgid "s"
msgstr "s"

#. Translation Hint, Pair #2
#: ps/help.c:65
msgid "list"
msgstr "liste"

#: ps/help.c:65
msgid "l"
msgstr "l"

#. Translation Hint, Pair #3
#: ps/help.c:67
msgid "output"
msgstr "sortie"

#: ps/help.c:67
msgid "o"
msgstr "o"

#. Translation Hint, Pair #4
#: ps/help.c:69
msgid "threads"
msgstr "threads"

#: ps/help.c:69
msgid "t"
msgstr "h"

#. Translation Hint, Pair #5
#: ps/help.c:71
msgid "misc"
msgstr "divers"

#: ps/help.c:71
msgid "m"
msgstr "d"

#. Translation Hint, Pair #6
#: ps/help.c:73
msgid "all"
msgstr "tous"

#: ps/help.c:73
msgid "a"
msgstr "t"

#: ps/help.c:94
#, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options]\n"
msgstr ""
"\n"
"Usage:\n"
" %s [options]\n"

#: ps/help.c:99
msgid ""
"\n"
"Basic options:\n"
msgstr ""
"\n"
"Options de base:\n"

#: ps/help.c:100
msgid " -A, -e               all processes\n"
msgstr " -A, -e               tous les processus\n"

#: ps/help.c:101
msgid " -a                   all with tty, except session leaders\n"
msgstr " -a                   tous avec un tty sauf les têtes de sessions\n"

#: ps/help.c:102
msgid "  a                   all with tty, including other users\n"
msgstr ""
"  a                   tous avec un tty y compris les autres utilisateurs\n"

#: ps/help.c:103
msgid " -d                   all except session leaders\n"
msgstr " -d                   tous sauf les têtes de sessions\n"

#: ps/help.c:104
msgid " -N, --deselect       negate selection\n"
msgstr " -N, --deselect       inverse la sélection\n"

#: ps/help.c:105
msgid "  r                   only running processes\n"
msgstr "  r                   seuls les processus s'exécutant\n"

#: ps/help.c:106
msgid "  T                   all processes on this terminal\n"
msgstr "  T                   tous les processus sur ce terminal\n"

#: ps/help.c:107
msgid "  x                   processes without controlling ttys\n"
msgstr "  x                   processus sans ttys contrôlant\n"

#: ps/help.c:110
msgid ""
"\n"
"Selection by list:\n"
msgstr ""
"\n"
"Sélection par liste:\n"

#: ps/help.c:111
msgid " -C <command>         command name\n"
msgstr " -C <commande>        nom de la commande\n"

#: ps/help.c:112
msgid " -G, --Group <GID>    real group id or name\n"
msgstr " -G, --Group <GID>    ID ou nom réel du groupe\n"

#: ps/help.c:113
msgid " -g, --group <group>  session or effective group name\n"
msgstr " -g, --group <groupe> session ou nom de group effectif\n"

#: ps/help.c:114
msgid " -p, p, --pid <PID>   process id\n"
msgstr " -p, p, --pid <PID>   ID du processus\n"

#: ps/help.c:115
msgid "        --ppid <PID>  parent process id\n"
msgstr "        --ppid <PID>  ID du processus parent\n"

#: ps/help.c:116
msgid ""
" -q, q, --quick-pid <PID>\n"
"                      process id (quick mode)\n"
msgstr ""
" -q, q, --quick-pid <PID>\n"
"                      ID du processus (mode rapide)\n"

#: ps/help.c:118
msgid " -s, --sid <session>  session id\n"
msgstr " -s, --sid <session>  ID de session\n"

#: ps/help.c:119
msgid " -t, t, --tty <tty>   terminal\n"
msgstr " -t, t, --tty <tty>   terminal\n"

#: ps/help.c:120
msgid " -u, U, --user <UID>  effective user id or name\n"
msgstr " -u, U, --user <UID>  nom ou ID de l'utilisateur effectif\n"

#: ps/help.c:121
msgid " -U, --User <UID>     real user id or name\n"
msgstr " -U, --User <UID>     nom ou ID de l'utilisateur réel\n"

#: ps/help.c:122
msgid ""
"\n"
"  The selection options take as their argument either:\n"
"    a comma-separated list e.g. '-u root,nobody' or\n"
"    a blank-separated list e.g. '-p 123 4567'\n"
msgstr ""
"\n"
"  Les options de sélection prennent comme argument\n"
"    une liste séparée par des virgules (par exemple,\n"
"    « -u root,nobody ») ou une liste séparée par des\n"
"    espaces (par exemple, « -p 123 4567 »)\n"

#: ps/help.c:128
msgid ""
"\n"
"Output formats:\n"
msgstr ""
"\n"
"Formats de sortie:\n"

#: ps/help.c:129
msgid " -F                   extra full\n"
msgstr " -F                   vraiment complet\n"

#: ps/help.c:130
msgid " -f                   full-format, including command lines\n"
msgstr ""
" -f                   format complet y compris les lignes de commande\n"

#: ps/help.c:131
msgid "  f, --forest         ascii art process tree\n"
msgstr " f, --forest          arbre des processus en art ascii\n"

#: ps/help.c:132
msgid " -H                   show process hierarchy\n"
msgstr " -H                   montre la hiérarchie des processus\n"

#: ps/help.c:133
msgid " -j                   jobs format\n"
msgstr " -j                   format de la tâche\n"

#: ps/help.c:134
msgid "  j                   BSD job control format\n"
msgstr "  j                   format de contrôle de la tâche BSD\n"

#: ps/help.c:135
msgid " -l                   long format\n"
msgstr " -l                   format long\n"

#: ps/help.c:136
msgid "  l                   BSD long format\n"
msgstr "  l                   format long BSD\n"

#: ps/help.c:137
msgid " -M, Z                add security data (for SELinux)\n"
msgstr " -M, Z                ajoute les données de sécurité (pour SELinux)\n"

#: ps/help.c:138
msgid " -O <format>          preloaded with default columns\n"
msgstr " -O <format>          pré-remplir avec les colonnes par défaut\n"

#: ps/help.c:139
msgid "  O <format>          as -O, with BSD personality\n"
msgstr "  O <format>          comme -O avec la personnalité BSD\n"

#: ps/help.c:140
msgid ""
" -o, o, --format <format>\n"
"                      user-defined format\n"
msgstr ""
" -o, o, --format <format>\n"
"                      format défini par l'utilisateur\n"

#: ps/help.c:142
msgid "  s                   signal format\n"
msgstr "  s                   format de signal\n"

#: ps/help.c:143
msgid "  u                   user-oriented format\n"
msgstr "  u                   format orienté utilisateur\n"

#: ps/help.c:144
msgid "  v                   virtual memory format\n"
msgstr "  v                   format de mémoire virtuelle\n"

#: ps/help.c:145
msgid "  X                   register format\n"
msgstr "  X                   format de registre\n"

#: ps/help.c:146
msgid ""
" -y                   do not show flags, show rss vs. addr (used with -l)\n"
msgstr ""
" -y                   ne montre pas les fanions, montre rss/adr (utilisé "
"avec -l)\n"

#: ps/help.c:147
msgid "     --context        display security context (for SELinux)\n"
msgstr "     --context        affiche le contexte de sécurité (pour SELinux)\n"

#: ps/help.c:148
msgid "     --headers        repeat header lines, one per page\n"
msgstr "     --headers        répète les lignes d'en-tête, une par page\n"

#: ps/help.c:149
msgid "     --no-headers     do not print header at all\n"
msgstr "     --no-headers     ne pas afficher du tout d'en-tête\n"

#: ps/help.c:150
msgid ""
"     --cols, --columns, --width <num>\n"
"                      set screen width\n"
msgstr ""
"     --cols, --columns, --width <num>\n"
"                      change la largeur de l'écran\n"

#: ps/help.c:152
msgid ""
"     --rows, --lines <num>\n"
"                      set screen height\n"
msgstr ""
"     --rows, --lines <num>\n"
"                      change la hauteur de l'écran\n"

#: ps/help.c:156
msgid ""
"\n"
"Show threads:\n"
msgstr ""
"\n"
"Montre les threads:\n"

#: ps/help.c:157
msgid "  H                   as if they were processes\n"
msgstr "  H                   comme si ils étaient des processus\n"

#: ps/help.c:158
msgid " -L                   possibly with LWP and NLWP columns\n"
msgstr " -L                   éventuellement avec les colonnes LWP et NLWP\n"

#: ps/help.c:159
msgid " -m, m                after processes\n"
msgstr " -m, m                après les processus\n"

#: ps/help.c:160
msgid " -T                   possibly with SPID column\n"
msgstr " -T                   éventuellement avec la colonne SPID\n"

#: ps/help.c:163
msgid ""
"\n"
"Miscellaneous options:\n"
msgstr ""
"\n"
"Options diverses:\n"

#: ps/help.c:164
msgid " -c                   show scheduling class with -l option\n"
msgstr ""
" -c                   montre la classe d'ordonnancement avec l'option -l\n"

#: ps/help.c:165
msgid "  c                   show true command name\n"
msgstr "  c                   montre le vrai nom de commande\n"

#: ps/help.c:166
msgid "  e                   show the environment after command\n"
msgstr "  e                   montre l'environnement après la commande\n"

#: ps/help.c:167
msgid ""
"  k,    --sort        specify sort order as: [+|-]key[,[+|-]key[,...]]\n"
msgstr ""
"  k,    --sort        indique l'ordre de tri: [+|-]clé[,[+|-]clé[,…]]\n"

#: ps/help.c:168
msgid "  L                   show format specifiers\n"
msgstr "  L                   montre le spécificateur de format\n"

#: ps/help.c:169
msgid "  n                   display numeric uid and wchan\n"
msgstr "  n                   affiche les uid et wchan sous forme numérique\n"

#: ps/help.c:170
msgid "  S,    --cumulative  include some dead child process data\n"
msgstr ""
"  S,    --cumulative  inclus quelques données sur les processus enfants "
"terminés\n"

#: ps/help.c:171
msgid " -y                   do not show flags, show rss (only with -l)\n"
msgstr ""
" -y                   ne montre pas les fanions, montre rss (uniquement avec "
"-l)\n"

#: ps/help.c:172
msgid " -V, V, --version     display version information and exit\n"
msgstr " -V, V, --version     affiche les informations de version et arrête\n"

#: ps/help.c:173
msgid " -w, w                unlimited output width\n"
msgstr " -w, w                sortie sur largeur illimitée\n"

#: ps/help.c:174
#, c-format
msgid ""
"\n"
"        --%s <%s|%s|%s|%s|%s|%s>\n"
"                      display help and exit\n"
msgstr ""
"\n"
"        --%s <%s|%s|%s|%s|%s|%s>\n"
"                      affiche l'aide et arrête\n"

#. Translation Notes for ps Help #2 ---------------------------------
#. .  Most of the following c-format string is derived from the 6
#. .  pairs of words + chars mentioned above in "Notes for ps Help #1".
#. .
#. .  In its full English form, help text would look like this:
#. .      Try 'ps --help <simple|list|output|threads|misc|all>'
#. .       or 'ps --help <s|l|o|t|m|a>'
#. .      for additional help text.
#. .
#. .  The word for "help" will be translated elsewhere.  Thus, the only
#. .  translations below will be: "Try", "or" and "for additional...".
#. .
#: ps/help.c:195
#, c-format
msgid ""
"\n"
" Try '%s --%s <%s|%s|%s|%s|%s|%s>'\n"
"  or '%s --%s <%s|%s|%s|%s|%s|%s>'\n"
" for additional help text.\n"
msgstr ""
"\n"
" Essayez '%s --%s <%s|%s|%s|%s|%s|%s>'\n"
"  ou '%s --%s <%s|%s|%s|%s|%s|%s>'\n"
" pour plus d'aide.\n"

#: ps/help.c:208
#, c-format
msgid ""
"\n"
"For more details see ps(1).\n"
msgstr ""
"\n"
"Pour plus de détails, consultez ps(1).\n"

#: ps/output.c:99
msgid "Unable to get system boot time"
msgstr ""

#: ps/output.c:114
#, fuzzy
msgid "Unable to get total memory"
msgstr "%13lu %s mémoire totale\n"

#: ps/output.c:2163
#, c-format
msgid "fix bigness error\n"
msgstr "corriger l'erreur d'ordre des octets\n"

#: ps/output.c:2246
#, c-format
msgid "bad alignment code\n"
msgstr "mauvais code d'alignement\n"

#: ps/parser.c:57
msgid "the option is exclusive: "
msgstr "l'option est exclusive: "

#: ps/parser.c:87
msgid "process ID list syntax error"
msgstr "erreur de syntaxe dans la liste des ID de processus"

#: ps/parser.c:88 ps/parser.c:89
msgid "process ID out of range"
msgstr "ID de processus hors limites"

#: ps/parser.c:102
msgid "user name does not exist"
msgstr "le nom d'utilisateur n'existe pas"

#: ps/parser.c:108
msgid "user ID out of range"
msgstr "ID utilisateur hors limites"

#: ps/parser.c:121
msgid "group name does not exist"
msgstr "le nom du groupe n'existe pas"

#: ps/parser.c:127
msgid "group ID out of range"
msgstr "ID du groupe hors limites"

#: ps/parser.c:143 ps/parser.c:167
msgid "TTY could not be found"
msgstr "le TTY n'a pu être trouvé"

#: ps/parser.c:169
msgid "list member was not a TTY"
msgstr "l'élément de la liste n'était pas un TTY"

#: ps/parser.c:194
msgid "improper list"
msgstr "liste incorrecte"

#: ps/parser.c:242
msgid "list of command names must follow -C"
msgstr "la liste des noms de commandes doit suivre -C"

#: ps/parser.c:256
msgid "list of real groups must follow -G"
msgstr "la liste des groupes réels doit suivre -G"

#: ps/parser.c:269
msgid "list of jobs must follow -J"
msgstr "la liste des tâches doit suivre -J"

#: ps/parser.c:297
msgid "format or sort specification must follow -O"
msgstr "la spécification de format ou de tri doit suivre -O"

#: ps/parser.c:308
msgid "list of PRM groups must follow -R"
msgstr "la liste des groupes PRM doit suivre -R"

#: ps/parser.c:327
msgid "list of real users must follow -U"
msgstr "la liste des utilisateurs réels doit suivre -U"

#: ps/parser.c:368
msgid "list of session leaders OR effective group names must follow -g"
msgstr ""
"la liste des têtes de sessions OU des noms de groupes effectifs doit suivre -"
"g"

#: ps/parser.c:379
msgid "list of session leaders OR effective group IDs was invalid"
msgstr ""
"la liste des têtes de sessions OU des ID de groupes effectifs était invalide"

#: ps/parser.c:403
msgid "format specification must follow -o"
msgstr "le spécificateur de format doit suivre -o"

#: ps/parser.c:409
msgid "list of process IDs must follow -p"
msgstr "la liste des ID des processus doit suivre -p"

#: ps/parser.c:426
msgid "the -r option is reserved"
msgstr "l'option -r est réservée"

#: ps/parser.c:432
msgid "list of session IDs must follow -s"
msgstr "la liste des ID de sessions doit suivre -s"

#: ps/parser.c:440
msgid "list of terminals (pty, tty...) must follow -t"
msgstr "la liste des terminaux (pty, tty…) doit suivre -t"

#: ps/parser.c:448
msgid "list of users must follow -u"
msgstr "la liste des utilisateurs doit suivre -u"

#: ps/parser.c:470
msgid "must set personality to get -x option"
msgstr "la personnalité doit être définie pour avoir l'option -x"

#: ps/parser.c:485
msgid "list of zones (contexts, labels, whatever?) must follow -z"
msgstr ""
"la liste des zones (contextes, étiquettes, quoi d'autre ?) doit suivre -z"

#: ps/parser.c:492
msgid "embedded '-' among SysV options makes no sense"
msgstr "un « - » incrusté dans les options SysV n'a pas de sens"

#: ps/parser.c:498
msgid "unsupported SysV option"
msgstr "option SysV non supportée"

#: ps/parser.c:511
msgid "cannot happen - problem #1"
msgstr "ne peut se produire – problème #1"

#: ps/parser.c:515
msgid "cannot happen - problem #2"
msgstr "ne peut se produire – problème #2"

#: ps/parser.c:517
msgid "second chance parse failed, not BSD or SysV"
msgstr "l'analyse de la seconde chance a échoué: pas BSD ni SysV"

#: ps/parser.c:534
msgid "option A is reserved"
msgstr "l'option A est réservée"

#: ps/parser.c:539
msgid "option C is reserved"
msgstr "l'option C est réservée"

#: ps/parser.c:559
msgid "format or sort specification must follow O"
msgstr "la spécification de format ou de tri doit suivre O"

#: ps/parser.c:584
msgid "list of users must follow U"
msgstr "la liste des utilisateurs doit suivre U"

#: ps/parser.c:596
msgid "obsolete W option not supported (you have a /dev/drum?)"
msgstr "l'option obsolète W n'est pas supportée (avez-vous un /dev/drum ?)"

#: ps/parser.c:632 ps/parser.c:899 ps/parser.c:908
msgid "only one heading option may be specified"
msgstr "une seule option d'en-tête peut être spécifiée"

#: ps/parser.c:647
msgid "long sort specification must follow 'k'"
msgstr "la spécification de tri long doit suivre « k »"

#: ps/parser.c:675
msgid "format specification must follow o"
msgstr "la spécification de format doit suivre o"

#: ps/parser.c:681
msgid "list of process IDs must follow p"
msgstr "la liste des ID de processus doit suivre p"

#: ps/parser.c:739
msgid "embedded '-' among BSD options makes no sense"
msgstr "un « - » incrusté dans les options BSD n'a pas de sens"

#: ps/parser.c:745
msgid "unsupported option (BSD syntax)"
msgstr "option non supportée (syntaxe BSD)"

#: ps/parser.c:831 ps/parser.c:843
msgid "unknown gnu long option"
msgstr "option longue gnu inconnue"

#: ps/parser.c:851
msgid "list of real groups must follow --Group"
msgstr "la liste des groupes réels doit suivre --Group"

#: ps/parser.c:859
msgid "list of real users must follow --User"
msgstr "la liste des utilisateurs réels doit suivre --User"

#: ps/parser.c:878
msgid "number of columns must follow --cols, --width, or --columns"
msgstr "le nombre de colonnes doit suivre --cols, --width ou --columns"

#: ps/parser.c:881
msgid "option --cumulative does not take an argument"
msgstr "l'option --cumulative ne prend pas d'argument"

#: ps/parser.c:886
msgid "option --deselect does not take an argument"
msgstr "l'option --deselect ne prend pas d'argument"

#: ps/parser.c:898
msgid "option --no-heading does not take an argument"
msgstr "l'option --no-heading ne prend pas d'argument"

#: ps/parser.c:907
msgid "option --heading does not take an argument"
msgstr "l'option --heading ne prend pas d'argument"

#: ps/parser.c:913
msgid "option --forest does not take an argument"
msgstr "l'option --forest ne prend pas d'argument"

#: ps/parser.c:919
msgid "format specification must follow --format"
msgstr "la spécification de format doit suivre --format"

#: ps/parser.c:925
msgid "list of effective groups must follow --group"
msgstr "la liste des groupes effectifs doit suivre --group"

#: ps/parser.c:943
msgid "list of process IDs must follow --pid"
msgstr "la liste des ID de processus doit suivre --pid"

#: ps/parser.c:959
msgid "list of process IDs must follow --ppid"
msgstr "la liste des ID de processus doit suivre --ppid"

#: ps/parser.c:977
msgid "number of rows must follow --rows or --lines"
msgstr "le nombre de lignes doit suivre --rows ou --lines"

#: ps/parser.c:981
msgid "some sid thing(s) must follow --sid"
msgstr "quelques choses sid doivent suivre --sid"

#: ps/parser.c:989
msgid "long sort specification must follow --sort"
msgstr "la spécification de tri longue doit suivre --sort"

#: ps/parser.c:995
msgid "list of ttys must follow --tty"
msgstr "la liste des tty doit suivre --tty"

#: ps/parser.c:1003
msgid "list of effective users must follow --user"
msgstr "la liste des utilisateurs effectifs doit suivre --user"

#: ps/parser.c:1119
msgid "way bad"
msgstr "très mauvais"

#: ps/parser.c:1133
msgid "garbage option"
msgstr "option crasse"

#: ps/parser.c:1137
msgid "something broke"
msgstr "quelque chose de cassé"

#: ps/parser.c:1157
msgid "thread display conflicts with forest display"
msgstr "l'affichage par threads est en conflit avec l'affichage de type forêt"

#: ps/parser.c:1162
msgid "thread flags conflict; can't use H with m or -m"
msgstr ""
"conflit dans les fanions de threads: H ne peut être utilisé avec m ou -m"

#: ps/parser.c:1164
msgid "thread flags conflict; can't use both m and -m"
msgstr ""
"conflit dans les fanions de threads: m et -m ne peuvent être utilisés "
"ensemble"

#: ps/parser.c:1166
msgid "thread flags conflict; can't use both -L and -T"
msgstr ""
"conflit dans les fanions de threads: -L et -T ne peuvent être utilisés "
"ensemble"

#: ps/parser.c:1239 ps/parser.c:1240
#, c-format
msgid "error: %s\n"
msgstr "erreur: %s\n"

#: ps/select.c:68
msgid "process selection options conflict"
msgstr "conflit dans les options de sélection des processus"

#: ps/sortformat.c:106 ps/sortformat.c:111
msgid "seriously crashing: goodbye cruel world"
msgstr "plantage sérieux: adieu monde cruel"

#: ps/sortformat.c:146
msgid "improper AIX field descriptor"
msgstr "descripteur de champ AIX incorrect"

#: ps/sortformat.c:167
msgid "unknown AIX field descriptor"
msgstr "descripteur de champ AIX inconnu"

#: ps/sortformat.c:172
msgid "AIX field descriptor processing bug"
msgstr "bug dans le traitement du descripteur de champ AIX"

#: ps/sortformat.c:285
#, c-format
msgid "unknown user-defined format specifier \"%s\""
msgstr "spécificateur de format défini par l'utilisateur « %s » inconnu"

#: ps/sortformat.c:312
msgid "empty format list"
msgstr "liste de format vide"

#: ps/sortformat.c:313
msgid "improper format list"
msgstr "liste de format incorrecte"

#: ps/sortformat.c:314
msgid "column widths must be unsigned decimal numbers"
msgstr "les largeurs de colonnes doivent être des nombres décimaux non signés"

#: ps/sortformat.c:315
msgid "can not set width for a macro (multi-column) format specifier"
msgstr ""
"la largeur ne peut pas être définie pour une macro (multi colonne) de "
"spécificateur de format"

#: ps/sortformat.c:370 ps/sortformat.c:386
msgid "improper sort list"
msgstr "liste de tri incorrecte"

#: ps/sortformat.c:381
msgid "empty sort list"
msgstr "liste de tri vide"

#: ps/sortformat.c:402 ps/sortformat.c:481 ps/sortformat.c:483
msgid "unknown sort specifier"
msgstr "spécificateur de tri inconnu"

#: ps/sortformat.c:429 ps/sortformat.c:434 ps/sortformat.c:441
#: ps/sortformat.c:447
msgid "bad sorting code"
msgstr "mauvais code de tri"

#: ps/sortformat.c:444
msgid "PPID sort and forest output conflict"
msgstr "conflit entre le tri de PPID et l'affichage de type forêt"

#: ps/sortformat.c:518
msgid "option -O can not follow other format options"
msgstr "l'option -O ne peut pas suivre d'autres options de format"

#: ps/sortformat.c:525 ps/sortformat.c:543
msgid "multiple sort options"
msgstr "options de tri multiples"

#: ps/sortformat.c:533
msgid "option O is neither first format nor sort order"
msgstr "l'option O n'est ni le premier format ni un ordre de tri"

#: ps/sortformat.c:660
msgid "modifier -y without format -l makes no sense"
msgstr "le modificateur -y sans le format -l n'a pas de sens"

#: ps/sortformat.c:759
msgid "bug: must reset the list first"
msgstr "bug: la liste doit être réinitialisée d'abord"

#: ps/sortformat.c:796
msgid "tell <procps@freelists.org> what you expected"
msgstr "dites à <procps@freelists.org> ce que vous attendiez"

#: ps/sortformat.c:806
msgid ""
"tell <procps@freelists.org> what you want (-L/-T, -m/m/H, and $PS_FORMAT)"
msgstr ""
"dites à <procps@freelists.org> ce que vous voulez (-L/-T, -m/m/H et "
"$PS_FORMAT)"

#: ps/sortformat.c:823
#, c-format
msgid "warning: $PS_FORMAT ignored. (%s)\n"
msgstr "attention: $PS_FORMAT est ignoré. (%s)\n"

#: ps/sortformat.c:828 ps/sortformat.c:838
msgid "conflicting format options"
msgstr "options de format en conflit"

#: ps/sortformat.c:829
msgid "can not use output modifiers with user-defined output"
msgstr ""
"un modificateur de sortie ne peut pas être utilisé avec une sortie définie "
"par l'utilisateur"

#: ps/sortformat.c:830
msgid "-L/-T with H/m/-m and -o/-O/o/O is nonsense"
msgstr "-L/-T avec H/m/-m et -o/-O/o/O n'a pas de sens"

#: ps/sortformat.c:888
msgid "internal error: no PID or PPID for -j option"
msgstr "erreur interne: pas de PID ou de PPID pour l'option -j"

#: ps/sortformat.c:890
msgid "lost my PGID"
msgstr "j'ai perdu mon PGID"

#: ps/sortformat.c:903
msgid "internal error: no PRI for -c option"
msgstr "erreur interne: pas de PRI pour l'option -c"

#: ps/sortformat.c:906
msgid "lost my CLS"
msgstr "j'ai perdu mon CLS"

#: ps/sortformat.c:911
msgid "-T with H/-m/m but no PID for SPID to follow"
msgstr "-T avec H/-m/m mais aucun PID à suivre pour SPID"

#: ps/sortformat.c:922
msgid "-L with H/-m/m but no PID/PGID/SID/SESS for NLWP to follow"
msgstr "-L comme H/-m/m mais sans PID/PGID/SID/SESS à suivre pour NLWP"

#: pwdx.c:37
#, c-format
msgid " %s [options] pid...\n"
msgstr " %s [options] pid…\n"

#: pwdx.c:113
#, c-format
msgid "invalid process id: %s"
msgstr "ID de processus invalide: %s"

#: skill.c:281
msgid "Unable to create pid Pids_info structure"
msgstr ""

#: skill.c:284 w.c:408
#, fuzzy
msgid "Unable to load process information"
msgstr "impossible de clôner le processus"

#: skill.c:313
#, c-format
msgid " %s [signal] [options] <expression>\n"
msgstr " %s [signal] [options] <expression>\n"

#: skill.c:317
#, c-format
msgid " %s [new priority] [options] <expression>\n"
msgstr " %s [nouvelle priorité] [options] <expression>\n"

#: skill.c:321
msgid " -f, --fast         fast mode (not implemented)\n"
msgstr " -f, --fast         mode rapide (pas encore disponible)\n"

#: skill.c:322
msgid " -i, --interactive  interactive\n"
msgstr " -i, --interactive  interactif\n"

#: skill.c:323
msgid " -l, --list         list all signal names\n"
msgstr " -l, --list         liste tous les noms de signaux\n"

#: skill.c:324
msgid " -L, --table        list all signal names in a nice table\n"
msgstr ""
" -L, --table        liste tous les noms de signaux dans une belle table\n"

#: skill.c:325
msgid ""
" -n, --no-action    do not actually kill processes; just print what would "
"happen\n"
msgstr ""
" -n, --no-action    ne tue pas réellement le processus. Affiche simplement "
"ce qui va se passer\n"

#: skill.c:326
msgid " -v, --verbose      explain what is being done\n"
msgstr " -v, --verbose      explique ce qui est en train de se produire\n"

#: skill.c:327
msgid " -w, --warnings     enable warnings (not implemented)\n"
msgstr " -w, --warnings     active les avertissements (pas disponible)\n"

#: skill.c:329
msgid ""
"Expression can be: terminal, user, pid, command.\n"
"The options below may be used to ensure correct interpretation.\n"
msgstr ""
"L'expression peut être: terminal, user, pid, command.\n"
"Les options ci-dessous peuvent être utilisées pour assurer une "
"interprétation correcte.\n"

#: skill.c:331
msgid " -c, --command <command>  expression is a command name\n"
msgstr " -c, --command <commande> l'expression est un nom de commande\n"

#: skill.c:332
msgid " -p, --pid <pid>          expression is a process id number\n"
msgstr ""
" -p, --pid <pid>          l'expression est un numéro d'identification de "
"processus\n"

#: skill.c:333
msgid " -t, --tty <tty>          expression is a terminal\n"
msgstr " -t, --tty <tty>          l'expression est un terminal\n"

#: skill.c:334
msgid " -u, --user <username>    expression is a username\n"
msgstr " -u, --user <nom_utilisateur> l'expression est un nom d'utilisateur\n"

#: skill.c:336
msgid "Alternatively, expression can be:\n"
msgstr "L'expression peut aussi être:\n"

#: skill.c:337
msgid ""
" --ns <pid>               match the processes that belong to the same\n"
"                          namespace as <pid>\n"
msgstr ""
" --ns <pid>               fait correspondre les processus qui appartiennent\n"
"                          au même espace de nom que <pid>\n"

#: skill.c:339
msgid ""
" --nslist <ns,...>        list which namespaces will be considered for\n"
"                          the --ns option; available namespaces are\n"
":                          ipc, mnt, net, pid, user, uts\n"
msgstr ""
" --nslist <en,…>          liste quels espaces de noms vont être pris en\n"
"                          considération par l'option --ns. Les espaces de "
"noms\n"
"                          disponibles sont: ipc, mnt, net, pid, user, uts\n"

#: skill.c:349
#, c-format
msgid ""
"\n"
"The default signal is TERM. Use -l or -L to list available signals.\n"
"Particularly useful signals include HUP, INT, KILL, STOP, CONT, and 0.\n"
"Alternate signals may be specified in three ways: -SIGKILL -KILL -9\n"
msgstr ""
"\n"
"Le signal par défaut est TERM. Utilisez -l ou -L pour afficher les signaux\n"
"disponibles. Les signaux particulièrement utiles comprennent HUP, INT, "
"KILL,\n"
"STOP, CONT et 0. Les signaux peuvent aussi être spécifiés de trois "
"manières:\n"
"-SIGKILL -KILL -9\n"

#: skill.c:356
#, c-format
msgid ""
"\n"
"The default priority is +4. (snice +4 ...)\n"
"Priority numbers range from +20 (slowest) to -20 (fastest).\n"
"Negative priority numbers are restricted to administrative users.\n"
msgstr ""
"\n"
"La priorité par défaut est +4. (snice +4 …)\n"
"La priorité prend une valeur entre +20 (le plus bas) à -20 (le plus "
"rapide).\n"
"Les priorités négatives sont accessibles aux seuls administrateurs.\n"

#: skill.c:378
#, c-format
msgid "priority %lu out of range"
msgstr "priorité %lu hors limites"

#: skill.c:487
#, c-format
msgid "invalid pid number %s"
msgstr "numéro de pid %s invalide"

#: skill.c:491
msgid "error reading reference namespace information"
msgstr ""
"erreur lors de la lecture de l'information de l'espace de nom de référence"

#: skill.c:499
msgid "invalid namespace list"
msgstr "liste d'espace de noms invalide"

#: skill.c:536
msgid "no process selection criteria"
msgstr "aucun critère de sélection de processus"

#: skill.c:539
msgid "general flags may not be repeated"
msgstr "les fanions généraux ne peuvent pas être répétés"

#: skill.c:542
msgid "-i makes no sense with -v, -f, and -n"
msgstr "-i n'a pas de sens avec -v, -f et -n"

#: skill.c:544
msgid "-v makes no sense with -i and -f"
msgstr "-v n'a pas de sens avec -i et -f"

#: skill.c:588
#, c-format
msgid "skill: \"%s\" is not supported\n"
msgstr "compétence: « %s » n'est pas supporté\n"

#: slabtop.c:106
msgid " -d, --delay <secs>  delay updates\n"
msgstr " -d, --delay <secs>  délai des mises à jour\n"

#: slabtop.c:107
msgid " -o, --once          only display once, then exit\n"
msgstr " -o, --once          n'affiche qu'une seule fois puis arrête\n"

#: slabtop.c:108
msgid " -s, --sort <char>   specify sort criteria by character (see below)\n"
msgstr ""
" -s, --sort <car>    spécifie le critère de tri par caractère (voir plus "
"bas)\n"

#: slabtop.c:113
msgid ""
"\n"
"The following are valid sort criteria:\n"
msgstr ""
"\n"
"Voici les critères de tri acceptés:\n"

#: slabtop.c:114
msgid " a: sort by number of active objects\n"
msgstr " a: trie selon le nombre d'objets actifs\n"

#: slabtop.c:115
msgid " b: sort by objects per slab\n"
msgstr " b: trie selon les objets dans le slab\n"

#: slabtop.c:116
msgid " c: sort by cache size\n"
msgstr " c: trie selon la taille de la cache\n"

#: slabtop.c:117
msgid " l: sort by number of slabs\n"
msgstr " l: trie selon le nombre de slabs\n"

#: slabtop.c:118
#, fuzzy
msgid " v: sort by (non display) number of active slabs\n"
msgstr " v: trie selon le nombre de slabs actives\n"

#: slabtop.c:119
msgid " n: sort by name\n"
msgstr " n: trie par nom\n"

#: slabtop.c:120
msgid " o: sort by number of objects (the default)\n"
msgstr " o: tri selon le nombre d'objets (choix par défaut)\n"

#: slabtop.c:121
#, fuzzy
msgid " p: sort by (non display) pages per slab\n"
msgstr " p: trie selon les pages par slab\n"

#: slabtop.c:122
msgid " s: sort by object size\n"
msgstr " s: trie par taille d'objet\n"

#: slabtop.c:123
msgid " u: sort by cache utilization\n"
msgstr " u: trie selon l'utilisation de la cache\n"

#: slabtop.c:186 slabtop.c:197
msgid "Cannot combine -d and -o options"
msgstr ""

#: slabtop.c:188
msgid "illegal delay"
msgstr "délai illégal"

#: slabtop.c:190 tload.c:142 vmstat.c:1046
msgid "delay must be positive integer"
msgstr "le délai doit être un nombre entier positif"

#: slabtop.c:234
msgid "Error getting slab summary results"
msgstr ""

#. Translation Hint: Next five strings must not
#. * exceed a length of 35 characters.
#: slabtop.c:240
#, no-c-format
msgid "Active / Total Objects (% used)"
msgstr "Actif / Total Objets (% utilisé)"

#: slabtop.c:246
#, no-c-format
msgid "Active / Total Slabs (% used)"
msgstr "Actif / Total Slabs (% utilisé)"

#: slabtop.c:252
#, no-c-format
msgid "Active / Total Caches (% used)"
msgstr "Actif / Total Caches (% utilisé)"

#: slabtop.c:258
#, no-c-format
msgid "Active / Total Size (% used)"
msgstr "Actif / Taille Totale (% utilisé)"

#: slabtop.c:263
msgid "Minimum / Average / Maximum Object"
msgstr "Minimum / Moyenne / Maximum (Objet)"

#. Translation Hint: Please keep alignment of the
#. * following intact.
#: slabtop.c:274
msgid "  OBJS ACTIVE  USE OBJ SIZE  SLABS OBJ/SLAB CACHE SIZE NAME"
msgstr "  OBJS ACTIF  UTIL OBJ DIM   SLABS OBJ/SLAB CACHE DIM  NOM"

#: slabtop.c:311 vmstat.c:764
msgid "Unable to create slabinfo structure"
msgstr ""

#: slabtop.c:316
msgid "terminal setting retrieval"
msgstr "récupération des paramètres du terminal"

#: slabtop.c:332 vmstat.c:771
msgid "Unable to get slabinfo node data"
msgstr ""

#: slabtop.c:338 vmstat.c:773
#, fuzzy
msgid "Unable to sort slab nodes"
msgstr "impossible de clôner le processus"

#: sysctl.c:113
#, c-format
msgid "Path is not under %s: %s"
msgstr ""

#: sysctl.c:131
#, c-format
msgid "separators should not be repeated: %s"
msgstr "les séparateurs ne devraient pas être répétés: %s"

#: sysctl.c:227
#, c-format
msgid " %s [options] [variable[=value] ...]\n"
msgstr " %s [options] [variable[=valeur] …]\n"

#: sysctl.c:230
msgid "  -a, --all            display all variables\n"
msgstr "  -a, --all            affiche toutes les variables\n"

#: sysctl.c:231
msgid "  -A                   alias of -a\n"
msgstr "  -A                   synonyme de -a\n"

#: sysctl.c:232
msgid "  -X                   alias of -a\n"
msgstr "  -X                   synonyme de -a\n"

#: sysctl.c:233
msgid "      --deprecated     include deprecated parameters to listing\n"
msgstr "      --deprecated     inclus les paramètres dépréciés dans la liste\n"

#: sysctl.c:234
msgid "      --dry-run        Print the key and values but do not write\n"
msgstr ""

#: sysctl.c:235
msgid "  -b, --binary         print value without new line\n"
msgstr "  -b, --binary         affiche la valeur sans retour à la ligne\n"

#: sysctl.c:236
msgid "  -e, --ignore         ignore unknown variables errors\n"
msgstr "  -e, --ignore         ignore les erreurs des variables inconnues\n"

#: sysctl.c:237
msgid "  -N, --names          print variable names without values\n"
msgstr ""
"  -N, --names          affiche les noms des variables sans les valeurs\n"

#: sysctl.c:238
msgid "  -n, --values         print only values of the given variable(s)\n"
msgstr ""
"  -n, --values         affiche uniquement les valeurs de la variable donnée\n"

#: sysctl.c:239
msgid "  -p, --load[=<file>]  read values from file\n"
msgstr ""
"  -p, --load[=<fichier>]\n"
"                       lis les valeurs dans le fichier\n"

#: sysctl.c:240
msgid "  -f                   alias of -p\n"
msgstr "  -f                   synonyme de -p\n"

#: sysctl.c:241
msgid "      --system         read values from all system directories\n"
msgstr ""
"      --system         lis les valeurs depuis tous les répertoires systèmes\n"

#: sysctl.c:242
msgid ""
"  -r, --pattern <expression>\n"
"                       select setting that match expression\n"
msgstr ""
"  -r, --pattern <expression>\n"
"                       sélectionne les paramètres qui correspondent à "
"l'expression\n"

#: sysctl.c:244
msgid "  -q, --quiet          do not echo variable set\n"
msgstr "  -q, --quiet          ne répète pas la variable changée\n"

#: sysctl.c:245
msgid "  -w, --write          enable writing a value to variable\n"
msgstr ""
"  -w, --write          active l'écriture d'une valeur dans la variable\n"

#: sysctl.c:246
msgid "  -o                   does nothing\n"
msgstr "  -o                   ne fait rien\n"

#: sysctl.c:247
msgid "  -x                   does nothing\n"
msgstr "  -x                   ne fait rien\n"

#: sysctl.c:248
msgid "  -d                   alias of -h\n"
msgstr "  -d                   synonyme de -h\n"

#: sysctl.c:329 sysctl.c:390
#, c-format
msgid "\"%s\" is an unknown key"
msgstr "« %s » est une clé inconnue"

#: sysctl.c:352 sysctl.c:508 sysctl.c:544
#, c-format
msgid "cannot stat %s"
msgstr "impossible d'obtenir les stat de %s"

#: sysctl.c:395 sysctl.c:437
#, c-format
msgid "permission denied on key '%s'"
msgstr "permission refusée sur la clé « %s »"

#: sysctl.c:402 sysctl.c:454
#, c-format
msgid "reading key \"%s\""
msgstr "lecture de la clé « %s »"

#: sysctl.c:492
#, c-format
msgid "unable to open directory \"%s\""
msgstr "impossible d'ouvrir le répertoire « %s »"

#: sysctl.c:555 sysctl.c:560 sysctl.c:592
#, c-format
msgid "setting key \"%s\""
msgstr "change la clé « %s »"

#: sysctl.c:569
#, c-format
msgid "\"%s\" is an unknown key%s"
msgstr "« %s » est une clé inconnue%s"

#: sysctl.c:570 sysctl.c:579 sysctl.c:583
msgid ", ignoring"
msgstr " ignorée"

#: sysctl.c:578
#, c-format
msgid "permission denied on key \"%s\"%s"
msgstr "permission refusée sur la clé « %s »%s"

#: sysctl.c:582
#, c-format
msgid "setting key \"%s\"%s"
msgstr "change la clé « %s »%s"

#: sysctl.c:655
#, c-format
msgid "%s(%d): invalid syntax, continuing..."
msgstr "%s(%d): erreur de syntaxe, je continue…"

#: sysctl.c:747
#, c-format
msgid ""
"GLOB_TILDE is not supported on your platform, the tilde in \"%s\" won't be "
"expanded."
msgstr ""
"GLOB_TILDE n'est pas supporté sur votre plate-forme. Le tilde dans « %s » ne "
"sera pas remplacé."

#: sysctl.c:753
msgid "glob failed"
msgstr "glob a échoué"

#: sysctl.c:759
#, c-format
msgid "cannot open \"%s\""
msgstr "impossible d'ouvrir « %s »"

#: sysctl.c:863 sysctl.c:870
#, c-format
msgid "* Applying %s ...\n"
msgstr "* Applique %s …\n"

#: sysctl.c:1036
#, c-format
msgid ""
"no variables specified\n"
"Try `%s --help' for more information."
msgstr ""
"pas de variable spécifiée\n"
"Essayez « %s --help » pour plus d'informations."

#: sysctl.c:1040
#, c-format
msgid ""
"options -N and -q cannot coexist\n"
"Try `%s --help' for more information."
msgstr ""
"les options -N et -q ne peuvent pas coexister\n"
"Essayez « %s --help » pour plus d'informations."

#: tload.c:75 tload.c:77
msgid "screen too small or too large"
msgstr "écran trop petit ou trop grand"

#: tload.c:80
msgid "screen too small"
msgstr "écran trop petit"

#: tload.c:96
#, c-format
msgid " %s [options] [tty]\n"
msgstr " %s [options] [tty]\n"

#: tload.c:98
msgid " -d, --delay <secs>  update delay in seconds\n"
msgstr " -d, --delay <secs>  délai de mise à jour en secondes\n"

#: tload.c:99
msgid " -s, --scale <num>   vertical scale\n"
msgstr " -s, --scale <num>   échelle verticale\n"

#: tload.c:137
msgid "scale cannot be negative"
msgstr "l'échelle ne peut pas être négative"

#: tload.c:144 vmstat.c:1048
msgid "too large delay value"
msgstr "valeur de délai trop grande"

#: tload.c:159
msgid "can not open tty"
msgstr "le tty ne peut être ouvert"

#: tload.c:218 tload.c:220
msgid "writing to tty failed"
msgstr "l'écriture dans le tty a échoué"

#. Translation Notes ------------------------------------------------
#. .  It is strongly recommend that the --no-wrap command line option
#. .  be used with all supporting translation tools, when available.
#. .
#. .  The following line pairs contain only plain text and consist of:
#. .     1) a field name/column header - mostly upper case
#. .     2) the related description    - both upper and lower case
#. .
#. .  To avoid truncation on the main top display, each column header
#. .  is noted with its maximum size, while a few are 'variable' width.
#. .  Names for the latter should probably be 10 or fewer characters.
#. .
#. .  Those fields shown with a '+' are also eligible for user resizing
#. .  using the 'X' command. That means the default width might produce
#. .  truncation but need not if widened (see the man page 'X' command).
#. .
#. .  All headers are subject to a maximum of 7 on the Fields Management
#. .  screen where truncation is entirely acceptable.
#. .
#. .  The associated descriptions are always limited to 20 characters,
#. .  and are used only on the Fields Management screen.
#. .
#. .  In all cases, fewer characters are just fine.
#. .
#. Translation Hint: maximum 'PID' = 5
#: top/top_nls.c:133
msgid "PID"
msgstr "PID"

#: top/top_nls.c:134
msgid "Process Id"
msgstr "ID processus"

#. Translation Hint: maximum 'PPID' = 5
#: top/top_nls.c:136
msgid "PPID"
msgstr "PPID"

#: top/top_nls.c:137
msgid "Parent Process pid"
msgstr "ID processus parent"

#. Translation Hint: maximum 'UID' = 5 +
#: top/top_nls.c:139
msgid "UID"
msgstr "UID"

#: top/top_nls.c:140
msgid "Effective User Id"
msgstr "ID util. effectif"

#. Translation Hint: maximum 'USER' = 8 +
#: top/top_nls.c:142 w.c:661
msgid "USER"
msgstr "UTIL."

#: top/top_nls.c:143
msgid "Effective User Name"
msgstr "Nom util. effectif"

#. Translation Hint: maximum 'RUID' = 5 +
#: top/top_nls.c:145
msgid "RUID"
msgstr "RUID"

#: top/top_nls.c:146
msgid "Real User Id"
msgstr "ID util. réel"

#. Translation Hint: maximum 'RUSER' = 8 +
#: top/top_nls.c:148
msgid "RUSER"
msgstr "RUSER"

#: top/top_nls.c:149
msgid "Real User Name"
msgstr "Nom util. réel"

#. Translation Hint: maximum 'SUID' = 5 +
#: top/top_nls.c:151
msgid "SUID"
msgstr "SUID"

#: top/top_nls.c:152
msgid "Saved User Id"
msgstr "ID util. sauvé"

#. Translation Hint: maximum 'SUSER' = 8 +
#: top/top_nls.c:154
msgid "SUSER"
msgstr "SUSER"

#: top/top_nls.c:155
msgid "Saved User Name"
msgstr "Nom util. sauvé"

#. Translation Hint: maximum 'GID' = 5 +
#: top/top_nls.c:157
msgid "GID"
msgstr "GID"

#: top/top_nls.c:158
msgid "Group Id"
msgstr "ID groupe"

#. Translation Hint: maximum 'GROUP' = 8 +
#: top/top_nls.c:160
msgid "GROUP"
msgstr "GROUPE"

#: top/top_nls.c:161
msgid "Group Name"
msgstr "Nom groupe"

#. Translation Hint: maximum 'PGRP' = 5
#: top/top_nls.c:163
msgid "PGRP"
msgstr "PGRP"

#: top/top_nls.c:164
msgid "Process Group Id"
msgstr "ID groupe proc."

#. Translation Hint: maximum 'TTY' = 8 +
#: top/top_nls.c:166
msgid "TTY"
msgstr "TTY"

#: top/top_nls.c:167
msgid "Controlling Tty"
msgstr "TTY contrôlant"

#. Translation Hint: maximum 'TPGID' = 5
#: top/top_nls.c:169
msgid "TPGID"
msgstr "TPGID"

#: top/top_nls.c:170
msgid "Tty Process Grp Id"
msgstr "ID grp tty proc."

#. Translation Hint: maximum 'SID' = 5
#: top/top_nls.c:172
msgid "SID"
msgstr "SID"

#: top/top_nls.c:173
msgid "Session Id"
msgstr "ID session"

#. Translation Hint: maximum 'PR' = 3
#: top/top_nls.c:175
msgid "PR"
msgstr "PR"

#: top/top_nls.c:176
msgid "Priority"
msgstr "Priorité"

#. Translation Hint: maximum 'NI' = 3
#: top/top_nls.c:178
msgid "NI"
msgstr "NI"

#: top/top_nls.c:179
msgid "Nice Value"
msgstr "Politesse"

#. Translation Hint: maximum 'nTH' = 3
#: top/top_nls.c:181
msgid "nTH"
msgstr "nTH"

#: top/top_nls.c:182
msgid "Number of Threads"
msgstr "Nombre de threads"

#. Translation Hint: maximum 'P' = 1
#: top/top_nls.c:184
msgid "P"
msgstr "P"

#: top/top_nls.c:185
msgid "Last Used Cpu (SMP)"
msgstr "Dernier CPU utilisé"

#. Translation Hint: maximum '%CPU' = 4
#: top/top_nls.c:187
#, c-format
msgid "%CPU"
msgstr "%CPU"

#: top/top_nls.c:188
msgid "CPU Usage"
msgstr "Util. CPU"

#. Translation Hint: maximum '' = 6
#: top/top_nls.c:190
msgid "TIME"
msgstr "TEMPS"

#: top/top_nls.c:191
msgid "CPU Time"
msgstr "Temps CPU"

#. Translation Hint: maximum 'TIME+' = 9
#: top/top_nls.c:193
msgid "TIME+"
msgstr "TEMPS+"

#: top/top_nls.c:194
msgid "CPU Time, hundredths"
msgstr "Temps CPU (centièmes)"

#. Translation Hint: maximum '%MEM' = 4
#: top/top_nls.c:196
msgid "%MEM"
msgstr "%MEM"

#: top/top_nls.c:197
msgid "Memory Usage (RES)"
msgstr "Util. mémoire (RES)"

#. Translation Hint: maximum 'VIRT' = 7
#: top/top_nls.c:199
msgid "VIRT"
msgstr "VIRT"

#: top/top_nls.c:200
msgid "Virtual Image (KiB)"
msgstr "Image virtuelle (Kio)"

#. Translation Hint: maximum 'SWAP' = 6
#: top/top_nls.c:202
msgid "SWAP"
msgstr "ÉCH."

#: top/top_nls.c:203
msgid "Swapped Size (KiB)"
msgstr "Taille écrite dans la partition d'échange (Kio)"

#. Translation Hint: maximum 'RES' = 6
#: top/top_nls.c:205
msgid "RES"
msgstr "RES"

#: top/top_nls.c:206
msgid "Resident Size (KiB)"
msgstr "Taille résid. (Kio)"

#. Translation Hint: maximum 'CODE' = 4
#: top/top_nls.c:208
msgid "CODE"
msgstr "CODE"

#: top/top_nls.c:209
msgid "Code Size (KiB)"
msgstr "Taille code (Kio)"

#. Translation Hint: maximum 'DATA' = 7
#: top/top_nls.c:211
msgid "DATA"
msgstr "DATA"

#: top/top_nls.c:212
msgid "Data+Stack (KiB)"
msgstr "Data+pile (Kio)"

#. Translation Hint: maximum 'SHR' = 6
#: top/top_nls.c:214
msgid "SHR"
msgstr "SHR"

#: top/top_nls.c:215
msgid "Shared Memory (KiB)"
msgstr "Mem partagée (Kio)"

#. Translation Hint: maximum 'nMaj' = 4
#: top/top_nls.c:217
msgid "nMaj"
msgstr "nMaj"

#: top/top_nls.c:218
msgid "Major Page Faults"
msgstr "Fautes page majeurs"

#. Translation Hint: maximum 'nMin' = 4
#: top/top_nls.c:220
msgid "nMin"
msgstr "nMin"

#: top/top_nls.c:221
msgid "Minor Page Faults"
msgstr "Fautes page mineurs"

#. Translation Hint: maximum 'nDRT' = 4
#: top/top_nls.c:223
msgid "nDRT"
msgstr "nDRT"

#: top/top_nls.c:224
msgid "Dirty Pages Count"
msgstr "Pages modifiées"

#. Translation Hint: maximum 'S' = 1
#: top/top_nls.c:226
msgid "S"
msgstr "S"

#: top/top_nls.c:227
msgid "Process Status"
msgstr "Statut processus"

#. Translation Hint: maximum 'COMMAND' = variable
#: top/top_nls.c:229
msgid "COMMAND"
msgstr "COM."

#: top/top_nls.c:230
msgid "Command Name/Line"
msgstr "Nom/ligne commande"

#. Translation Hint: maximum 'WCHAN' = 10 +
#: top/top_nls.c:232
msgid "WCHAN"
msgstr "WCHAN"

#: top/top_nls.c:233
msgid "Sleeping in Function"
msgstr "Dors dans fonction"

#. Translation Hint: maximum 'Flags' = 8
#: top/top_nls.c:235
msgid "Flags"
msgstr "Fanions"

#: top/top_nls.c:236
msgid "Task Flags <sched.h>"
msgstr "Fanions tâche <sched.h>"

#. Translation Hint: maximum 'CGROUPS' = variable
#: top/top_nls.c:238
msgid "CGROUPS"
msgstr "CGROUPS"

#: top/top_nls.c:239
msgid "Control Groups"
msgstr "Groups contrôle"

#. Translation Hint: maximum 'SUPGIDS' = variable
#: top/top_nls.c:241
msgid "SUPGIDS"
msgstr "SUPGIDS"

#: top/top_nls.c:242
msgid "Supp Groups IDs"
msgstr "ID groups sup"

#. Translation Hint: maximum 'SUPGRPS' = variable
#: top/top_nls.c:244
msgid "SUPGRPS"
msgstr "SUPGRPS"

#: top/top_nls.c:245
msgid "Supp Groups Names"
msgstr "Noms groups sup"

#. Translation Hint: maximum 'TGID' = 5
#: top/top_nls.c:247
msgid "TGID"
msgstr "TGID"

#: top/top_nls.c:248
msgid "Thread Group Id"
msgstr "ID group thread"

#. Translation Hint: maximum 'OOMa' = 5
#: top/top_nls.c:250
msgid "OOMa"
msgstr "OOMa"

#: top/top_nls.c:251
msgid "OOMEM Adjustment"
msgstr "Ajustement OOMEM"

#. Translation Hint: maximum 'OOMs' = 4
#: top/top_nls.c:253
msgid "OOMs"
msgstr "OOMs"

#: top/top_nls.c:254
msgid "OOMEM Score current"
msgstr "Score OOMEM actuel"

#. Translation Hint: maximum 'ENVIRON' = variable
#: top/top_nls.c:256
msgid "ENVIRON"
msgstr "ENVIRON"

#. Translation Hint: the abbreviation 'vars' below is shorthand for
#. 'variables'
#: top/top_nls.c:259
msgid "Environment vars"
msgstr "Var. d'environnement"

#. Translation Hint: maximum 'vMj' = 3
#: top/top_nls.c:261
msgid "vMj"
msgstr "vMj"

#: top/top_nls.c:262
msgid "Major Faults delta"
msgstr "Delta fautes maj"

#. Translation Hint: maximum 'vMn' = 3
#: top/top_nls.c:264
msgid "vMn"
msgstr "vMn"

#: top/top_nls.c:265
msgid "Minor Faults delta"
msgstr "Delta fautes min"

#. Translation Hint: maximum 'USED' = 6
#: top/top_nls.c:267
msgid "USED"
msgstr "UTIL"

#: top/top_nls.c:268
msgid "Res+Swap Size (KiB)"
msgstr "Taille res+éch (Kio)"

#. Translation Hint: maximum 'nsIPC' = 10 +
#: top/top_nls.c:270
msgid "nsIPC"
msgstr "nsIPC"

#: top/top_nls.c:271
msgid "IPC namespace Inode"
msgstr "Inode esp nom IPC"

#. Translation Hint: maximum 'nsMNT' = 10 +
#: top/top_nls.c:273
msgid "nsMNT"
msgstr "nsMNT"

#: top/top_nls.c:274
msgid "MNT namespace Inode"
msgstr "Inode esp nom MNT"

#. Translation Hint: maximum 'nsNET' = 10 +
#: top/top_nls.c:276
msgid "nsNET"
msgstr "nsNET"

#: top/top_nls.c:277
msgid "NET namespace Inode"
msgstr "Inode esp nom NET"

#. Translation Hint: maximum 'nsPID' = 10 +
#: top/top_nls.c:279
msgid "nsPID"
msgstr "nsPID"

#: top/top_nls.c:280
msgid "PID namespace Inode"
msgstr "Inode esp nom PID"

#. Translation Hint: maximum 'nsUSER' = 10 +
#: top/top_nls.c:282
msgid "nsUSER"
msgstr "nsUSER"

#: top/top_nls.c:283
msgid "USER namespace Inode"
msgstr "Inode esp nom USER"

#. Translation Hint: maximum 'nsUTS' = 10 +
#: top/top_nls.c:285
msgid "nsUTS"
msgstr "nsUTS"

#: top/top_nls.c:286
msgid "UTS namespace Inode"
msgstr "Inode esp nom UTS"

#. Translation Hint: maximum 'LXC' = 8 +
#: top/top_nls.c:288
msgid "LXC"
msgstr "LXC"

#: top/top_nls.c:289
msgid "LXC container name"
msgstr "Nom container LXC"

#. Translation Hint: maximum 'RSan' = 6
#: top/top_nls.c:291
msgid "RSan"
msgstr "RSan"

#: top/top_nls.c:292
msgid "RES Anonymous (KiB)"
msgstr "RES Anonymes (Kio)"

#. Translation Hint: maximum 'RSfd' = 6
#: top/top_nls.c:294
msgid "RSfd"
msgstr "RSfd"

#: top/top_nls.c:295
msgid "RES File-based (KiB)"
msgstr "RES Basé fichier (Kib)"

#. Translation Hint: maximum 'RSlk' = 6
#: top/top_nls.c:297
msgid "RSlk"
msgstr "RSlk"

#: top/top_nls.c:298
msgid "RES Locked (KiB)"
msgstr "RES verrouillé (Kio)"

#. Translation Hint: maximum 'RSsh' = 6
#: top/top_nls.c:300
msgid "RSsh"
msgstr "RSsh"

#: top/top_nls.c:301
msgid "RES Shared (KiB)"
msgstr "RES partagée (Kio)"

#. Translation Hint: maximum 'CGNAME' = variable
#: top/top_nls.c:303
msgid "CGNAME"
msgstr "CGNAME"

#: top/top_nls.c:304
msgid "Control Group name"
msgstr "Nom groupe contrôle"

#. Translation Hint: maximum 'NU' = 2
#: top/top_nls.c:306
msgid "NU"
msgstr "NU"

#: top/top_nls.c:307
msgid "Last Used NUMA node"
msgstr "Dernier nœud NUMA utilisé"

#. Translation Hint: maximum 'LOGID' = 5 +
#: top/top_nls.c:309
msgid "LOGID"
msgstr ""

#: top/top_nls.c:310
#, fuzzy
msgid "Login User Id"
msgstr "ID util. réel"

#. Translation Hint: maximum 'EXE' = variable
#: top/top_nls.c:312
msgid "EXE"
msgstr ""

#: top/top_nls.c:313
msgid "Executable Path"
msgstr ""

#: top/top_nls.c:319
msgid "Res Mem (smaps), KiB"
msgstr ""

#. Translation Hint: maximum 'PSS' = 6
#: top/top_nls.c:321
#, fuzzy
msgid "PSS"
msgstr "RSS"

#: top/top_nls.c:322
msgid "Proportion RSS,  KiB"
msgstr ""

#. Translation Hint: maximum 'PSan' = 6
#: top/top_nls.c:324
msgid "PSan"
msgstr ""

#: top/top_nls.c:325
msgid "Proportion Anon, KiB"
msgstr ""

#. Translation Hint: maximum 'PSfd' = 6
#: top/top_nls.c:327
msgid "PSfd"
msgstr ""

#: top/top_nls.c:328
msgid "Proportion File, KiB"
msgstr ""

#. Translation Hint: maximum 'PSsh' = 6
#: top/top_nls.c:330
msgid "PSsh"
msgstr ""

#: top/top_nls.c:331
msgid "Proportion Shrd, KiB"
msgstr ""

#. Translation Hint: maximum 'USS' = 6
#: top/top_nls.c:333
#, fuzzy
msgid "USS"
msgstr "RSS"

#: top/top_nls.c:334
msgid "Unique RSS, KiB"
msgstr ""

#. Translation Hint: maximum 'ioR' = 6
#: top/top_nls.c:336
msgid "ioR"
msgstr ""

#: top/top_nls.c:337
msgid "I/O Bytes Read"
msgstr ""

#. Translation Hint: maximum 'ioRop' = 5
#: top/top_nls.c:339
msgid "ioRop"
msgstr ""

#: top/top_nls.c:340
msgid "I/O Read Operations"
msgstr ""

#. Translation Hint: maximum 'ioW' = 6
#: top/top_nls.c:342
msgid "ioW"
msgstr ""

#: top/top_nls.c:343
msgid "I/O Bytes Written"
msgstr ""

#. Translation Hint: maximum 'ioWop' = 5
#: top/top_nls.c:345
msgid "ioWop"
msgstr ""

#: top/top_nls.c:346
msgid "I/O Write Operations"
msgstr ""

#. Translation Hint: maximum 'AGID' = 5
#: top/top_nls.c:348
msgid "AGID"
msgstr ""

#: top/top_nls.c:349
msgid "Autogroup Identifier"
msgstr ""

#. Translation Hint: maximum 'AGNI' = 4
#: top/top_nls.c:351
msgid "AGNI"
msgstr ""

#: top/top_nls.c:352
#, fuzzy
msgid "Autogroup Nice Value"
msgstr "Politesse"

#. Translation Hint: maximum 'STARTED' = 7
#: top/top_nls.c:354
msgid "STARTED"
msgstr ""

#: top/top_nls.c:355
msgid "Start Time from boot"
msgstr ""

#. Translation Hint: maximum 'ELAPSED' = 7
#: top/top_nls.c:357
msgid "ELAPSED"
msgstr ""

#: top/top_nls.c:358
msgid "Elapsed Running Time"
msgstr ""

#. Translation Hint: maximum '%CUU' = 6
#: top/top_nls.c:360
#, c-format
msgid "%CUU"
msgstr ""

#: top/top_nls.c:361
msgid "CPU Utilization"
msgstr ""

#. Translation Hint: maximum '%CUC' = 6
#: top/top_nls.c:363
#, c-format
msgid "%CUC"
msgstr ""

#: top/top_nls.c:364
msgid "Utilization + child"
msgstr ""

#. Translation Notes ------------------------------------------------
#. .  It is strongly recommend that the --no-wrap command line option
#. .  be used with all supporting translation tools, when available.
#. .
#. .  This group of lines contains both plain text and c-format strings.
#. .
#. .  Some strings reflect switches used to affect the running program
#. .  and should not be translated without also making corresponding
#. .  c-code logic changes.
#. .
#: top/top_nls.c:384
#, c-format
msgid ""
"\tsignal %d (%s) was caught by %s, please\n"
"\tsend bug reports to <procps@freelists.org>\n"
msgstr ""
"\tle signal %d (%s) a été intercepté par %s, veuillez\n"
"\tenvoyer les rapports de bogues à <procps@freelists.org>\n"

#: top/top_nls.c:387
#, c-format
msgid ""
"inappropriate '%s'\n"
"Usage:\n"
"  %s%s"
msgstr ""
"« %s » inapproprié\n"
"Usage:\n"
"  %s%s"

#: top/top_nls.c:390
#, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options]\n"
"\n"
"Options:\n"
" -b, --batch-mode                run in non-interactive batch mode\n"
" -c, --cmdline-toggle            reverse last remembered 'c' state\n"
" -d, --delay =SECS [.TENTHS]     iterative delay as SECS [.TENTHS]\n"
" -E, --scale-summary-mem =SCALE  set mem as: k,m,g,t,p,e for SCALE\n"
" -e, --scale-task-mem =SCALE     set mem with: k,m,g,t,p for SCALE\n"
" -H, --threads-show              show tasks plus all their threads\n"
" -i, --idle-toggle               reverse last remembered 'i' state\n"
" -n, --iterations =NUMBER        exit on maximum iterations NUMBER\n"
" -O, --list-fields               output all field names, then exit\n"
" -o, --sort-override =FIELD      force sorting on this named FIELD\n"
" -p, --pid =PIDLIST              monitor only the tasks in PIDLIST\n"
" -S, --accum-time-toggle         reverse last remembered 'S' state\n"
" -s, --secure-mode               run with secure mode restrictions\n"
" -U, --filter-any-user =USER     show only processes owned by USER\n"
" -u, --filter-only-euser =USER   show only processes owned by USER\n"
" -w, --width [=COLUMNS]          change print width [,use COLUMNS]\n"
" -1, --single-cpu-toggle         reverse last remembered '1' state\n"
"\n"
" -h, --help                      display this help text, then exit\n"
" -V, --version                   output version information & exit\n"
"\n"
"For more details see top(1)."
msgstr ""

#: top/top_nls.c:417
#, c-format
msgid "bad delay interval '%s'"
msgstr "mauvais intervalle de délai « %s »"

#: top/top_nls.c:418
#, c-format
msgid "bad iterations argument '%s'"
msgstr "mauvais argument d'interactions « %s »"

#: top/top_nls.c:419
#, c-format
msgid "pid limit (%d) exceeded"
msgstr "limite de pid (%d) dépassée"

#: top/top_nls.c:420
#, c-format
msgid "bad pid '%s'"
msgstr "mauvais pid « %s »"

#: top/top_nls.c:421
#, fuzzy, c-format
msgid "-%c argument missing"
msgstr "argument manquant"

#: top/top_nls.c:422
#, c-format
msgid "bad width arg '%s'"
msgstr "mauvais param de largeur « %s »"

#: top/top_nls.c:423
#, fuzzy, c-format
msgid "unknown option '%s'"
msgstr ""
"option « %c » inconnue\n"
"Usage:\n"
"  %s%s"

#: top/top_nls.c:424
msgid "-d disallowed in \"secure\" mode"
msgstr "-d interdit en mode « sure »"

#: top/top_nls.c:425
msgid "-d requires positive argument"
msgstr "-d requiert un paramètre positif"

#: top/top_nls.c:426
msgid "On"
msgstr "On"

#: top/top_nls.c:427
msgid "Off"
msgstr "Off"

#: top/top_nls.c:428
#, fuzzy, c-format
msgid "%s from %s"
msgstr "%s de %s\n"

#: top/top_nls.c:429
#, c-format
msgid "Forest mode %s"
msgstr "Mode forêt %s"

#: top/top_nls.c:430
msgid "failed tty get"
msgstr "échec de get sur le tty"

#: top/top_nls.c:431
#, c-format
msgid "failed tty set: %s"
msgstr "échec de set sur le tty: %s"

#: top/top_nls.c:432
msgid "Choose field group (1 - 4)"
msgstr "Choisissez le groupe du champ (1 à 4)"

#: top/top_nls.c:433
msgid "Command disabled, 'A' mode required"
msgstr "Commande désactivée, mode « A » requis"

#: top/top_nls.c:434
#, c-format
msgid "Command disabled, activate %s with '-' or '_'"
msgstr "Commande désactivée, activez %s avec « - » ou « _ »"

#: top/top_nls.c:435
msgid "No colors to map!"
msgstr "Pas de couleur dans la correspondance !"

#: top/top_nls.c:436
#, c-format
msgid "Failed '%s' open: %s"
msgstr "Échec à l'ouverture de « %s »: %s"

#: top/top_nls.c:437
#, c-format
msgid "Wrote configuration to '%s'"
msgstr "Configuration écrite dans  « %s »"

#: top/top_nls.c:438
#, c-format
msgid "Change delay from %.1f to"
msgstr "Change le délai de %.1f à"

#: top/top_nls.c:439
#, c-format
msgid "Show threads %s"
msgstr "Montre les threads %s"

#: top/top_nls.c:440
#, c-format
msgid "Irix mode %s"
msgstr "Mode Irix %s"

#: top/top_nls.c:441
#, c-format
msgid "PID to signal/kill [default pid = %d]"
msgstr "PID à signaler/tuer [pid par défaut = %d]"

#: top/top_nls.c:442
#, c-format
msgid "Send pid %d signal [%d/sigterm]"
msgstr "Envoyer au pid %d le signal [%d/sigterm]"

#: top/top_nls.c:443
#, c-format
msgid "Failed signal pid '%d' with '%d': %s"
msgstr "Échec à l'envoi du signal « %2$d » au pid « %1$d »: %3$s"

#: top/top_nls.c:444
msgid "Invalid signal"
msgstr "Signal invalide"

#: top/top_nls.c:445
#, c-format
msgid "PID to renice [default pid = %d]"
msgstr "PID dont la courtoisie va changer [pid par défaut = %d]"

#: top/top_nls.c:446
#, c-format
msgid "Renice PID %d to value"
msgstr "Change la courtoisie du PID %d à la valeur"

#: top/top_nls.c:447
#, c-format
msgid "Failed renice of PID %d to %d: %s"
msgstr "La courtoisie du PID %d n'a pas pu être mise à %d: %s"

#: top/top_nls.c:448
#, c-format
msgid "Rename window '%s' to (1-3 chars)"
msgstr "Renomme la fenêtre « %s » en (1-3 caractères)"

#: top/top_nls.c:449
#, c-format
msgid "Cumulative time %s"
msgstr "Temps cumulé %s"

#: top/top_nls.c:450
#, c-format
msgid "Maximum tasks = %d, change to (0 is unlimited)"
msgstr "Tâches maximum = %d, change en (0 pour illimité)"

#: top/top_nls.c:451
msgid "Invalid maximum"
msgstr "Maximum invalide"

#: top/top_nls.c:452
msgid "Which user (blank for all)"
msgstr "Quel utilisateur (vide pour tous)"

#: top/top_nls.c:453
msgid "Unknown command - try 'h' for help"
msgstr "Commande inconnue – essayez « h » pour l'aide"

#: top/top_nls.c:454
#, fuzzy, c-format
msgid "scroll coordinates: y = %d/%d (tasks), x = %d/%d (fields)"
msgstr "coordonnées de défilement: y= %d/%d (tâches), x = %d/%d (champs)"

#: top/top_nls.c:455
msgid "failed memory allocate"
msgstr "échec de l'allocation de mémoire"

#: top/top_nls.c:456
msgid "failed memory re-allocate"
msgstr "échec de la ré-allocation de mémoire"

#: top/top_nls.c:457
msgid "Unacceptable floating point"
msgstr "Nombre décimal inacceptable"

#: top/top_nls.c:458
msgid "Invalid user"
msgstr "Utilisateur invalide"

#: top/top_nls.c:459
msgid "forest view"
msgstr "vue forêt"

#: top/top_nls.c:460
msgid "failed pid maximum size test"
msgstr "le test du pid maximum a échoué"

#: top/top_nls.c:461
msgid "failed number of cpus test"
msgstr "le test du nombre de CPU a échoué"

#: top/top_nls.c:462
#, c-format
msgid "incompatible rcfile, you should delete '%s'"
msgstr "fichier rcfile incompatible, vous devriez effacer « %s »"

#: top/top_nls.c:463
#, c-format
msgid "window entry #%d corrupt, please delete '%s'"
msgstr "l'entrée de fenêtre #%d est corrompue, veuillez effacer « %s »"

#: top/top_nls.c:464
msgid "Unavailable in secure mode"
msgstr "Non disponible en mode sécurisé"

#: top/top_nls.c:465
msgid "Only 1 cpu detected"
msgstr "Seulement 1 CPU détecté"

#: top/top_nls.c:466
msgid "Unacceptable integer"
msgstr "Nombre entier inacceptable"

#: top/top_nls.c:467
msgid "conflicting process selections (U/p/u)"
msgstr "sélections de processus conflictuelles (U/p/u)"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 kibibytes (1024 bytes)
#: top/top_nls.c:470
msgid "KiB"
msgstr "KiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 mebibytes (1,048,576 bytes)
#: top/top_nls.c:473
msgid "MiB"
msgstr "MiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 gibibytes (1,073,741,824 bytes)
#: top/top_nls.c:476
msgid "GiB"
msgstr "GiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 tebibytes (1,099,511,627,776 bytes)
#: top/top_nls.c:479
msgid "TiB"
msgstr "TiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 pebibytes (1,024 tebibytes)
#: top/top_nls.c:482
msgid "PiB"
msgstr "PiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 exbibytes (1,024 pebibytes)
#: top/top_nls.c:485
msgid "EiB"
msgstr "EiB"

#: top/top_nls.c:486
msgid "Threads"
msgstr "Threads"

#: top/top_nls.c:487
msgid "Tasks"
msgstr "Tâches"

#. Translation Hint: The following "word" is meant to represent either a single
#. .                 cpu or all of the processors in a multi-processor computer
#. .                 (should be exactly 6 characters, excluding leading % & colon)
#: top/top_nls.c:491
#, fuzzy, c-format
msgid "%Cpu(s):"
msgstr "%Cpu(s):"

#. Translation Hint: The following "word" is meant to represent a single processor
#. .                 (should be exactly 3 characters, excluding leading %%, fmt chars & colon)
#: top/top_nls.c:494
#, fuzzy, c-format
msgid "%%Cpu%-3d:"
msgstr "%%Cpu%-3d:"

#. Translation Hint: The following word "another" must have 1 trailing space
#: top/top_nls.c:496
msgid "another "
msgstr "autre "

#: top/top_nls.c:497
msgid "Locate next inactive, use \"L\""
msgstr "Trouve le suivant inactif, utilisez « L »"

#: top/top_nls.c:498
msgid "Locate string"
msgstr "Trouve chaîne"

#: top/top_nls.c:499
#, c-format
msgid "%s\"%s\" not found"
msgstr "%s« %s » pas trouvé"

#: top/top_nls.c:500
#, c-format
msgid "width incr is %d, change to (0 default, -1 auto)"
msgstr "largeur incr est %d, change à (0 défaut, -1 auto)"

#: top/top_nls.c:501
#, fuzzy
msgid "rcfile has inspect/other-filter error(s), save anyway?"
msgstr ""
"rcfile a une ou des erreur(s) d'entrée « inspect » ou d'autre filtre, écrire "
"quand-même ?"

#: top/top_nls.c:502
#, c-format
msgid "unrecognized field name '%s'"
msgstr "nom de champ « %s » non reconnu"

#: top/top_nls.c:503
msgid "even using field names only, window is now too small"
msgstr ""
"même en n'utilisant que les noms de champs, la fenêtre est maintenant trop "
"petite"

#: top/top_nls.c:505
msgid "Open Files"
msgstr "Ouvrir fichiers"

#: top/top_nls.c:506
msgid "NUMA Info"
msgstr "Info NUMA"

#: top/top_nls.c:507
msgid "Log"
msgstr "Journal"

#: top/top_nls.c:508
msgid ""
"the '=' key will eventually show the actual file read or command(s) "
"executed ..."
msgstr ""
"la touche « = » montera le fichier réellement lu ou la/les commande(s) "
"exécutée(s)…"

#: top/top_nls.c:509
msgid "demo"
msgstr "démo"

#: top/top_nls.c:510
#, fuzzy, c-format
msgid ""
"This is simulated output representing the contents of some file or the "
"output\n"
"from some command.  Exactly which commands and/or files are solely up to "
"you.\n"
"\n"
"Although this text is for information purposes only, it can still be "
"scrolled\n"
"and searched like real output will be.  You are encouraged to experiment "
"with\n"
"those features as explained in the prologue above.\n"
"\n"
"To enable real Inspect functionality, entries must be added to the end of "
"the\n"
"top personal personal configuration file.  You could use your favorite "
"editor\n"
"to accomplish this, taking care not to disturb existing entries.\n"
"\n"
"Another way to add entries is illustrated below, but it risks overwriting "
"the\n"
"rcfile.  Redirected echoes must not replace (>) but append (>>) to that "
"file.\n"
"\n"
"  /bin/echo -e \"pipe\\tOpen Files\\tlsof -P -p %d 2>&1\" >> ~/.toprc\n"
"  /bin/echo -e \"file\\tNUMA Info\\t/proc/%d/numa_maps\" >> ~/.toprc\n"
"  /bin/echo -e \"pipe\\tLog\\ttail -n200 /var/log/syslog | sort -Mr\" >> ~/."
"toprc\n"
"\n"
"If you don't know the location or name of the top rcfile, use the 'W' "
"command\n"
"and note those details.  After backing up the current rcfile, try issuing "
"the\n"
"above echoes exactly as shown, replacing '.toprc' as appropriate.  The "
"safest\n"
"approach would be to use copy then paste to avoid any typing mistakes.\n"
"\n"
"Finally, restart top to reveal what actual Inspect entries combined with "
"this\n"
"new command can offer.  The possibilities are endless, especially "
"considering\n"
"that 'pipe' type entries can include shell scripts too!\n"
"\n"
"For additional important information, please consult the top(1) man "
"document.\n"
"Then, enhance top with your very own customized 'file' and/or 'pipe' "
"entries.\n"
"\n"
"Enjoy!\n"
msgstr ""
"Ceci est une sortie simulée représentant le contenu d'un fichier ou la "
"sortie\n"
"d'une commande. Quelle commande ou quel fichier dépend uniquement de vous.\n"
"\n"
"Bien que ce texte soit purement informatif, vous pouvez le faire défiler ou\n"
"lancer une recherche comme une sortie réelle. Vous êtes encouragé à\n"
"expérimenter ces fonctionnalités comme expliqué dans le prologue ci-dessus.\n"
"\n"
"Pour activer les fonctionnalités réelles d'Inspect, des entrées doivent "
"être\n"
"ajoutées à la fin du fichier personnel de configuration de top. Vous pouvez\n"
"utiliser votre éditeur de texte pour accomplir ceci en prenant soin de ne\n"
"pas démettre les entrées existantes.\n"
"\n"
"Une autre manière d'ajouter les entrées est illustrée ci-dessous mais il y\n"
"a un risque qu'elle écrase le fichier rcfile. Les sorties echo redirigées\n"
"ne doivent pas remplacer le contenu (>) mais bien ajouter (>>) à la fin\n"
"du fichier.\n"
"\n"
"  /bin/echo -e \"pipe\\tOpen Files\\tlsof -P -p %d 2>&1\" >> ~/.toprc\n"
"  /bin/echo -e \"file\\tNUMA Info\\t/proc/%d/numa_maps\" >> ~/.toprc\n"
"  /bin/echo -e \"pipe\\tLog\\ttail -n200 /var/log/syslog | sort -Mr\" >> ~/."
"toprc\n"
"\n"
"Si vous ignorez l'emplacement ou le nom du fichier rcfiled de top, utilisez\n"
"la commande « W » et notez ces détails. Après avoir fait une copie de\n"
"sauvegarde du fichier rcfile actuel, essayez les commandes echo ci-dessus\n"
"exactement tel que montré. Remplacez « .toprc » par le bon nom de fichier.\n"
"La manière la plus sûre est d'utiliser un copier/coller pour éviter les\n"
"fautes de frappe.\n"
"\n"
"Finalement, redémarrez top pour révéler ce que les entrées Inspect "
"combinées\n"
"avec cette nouvelle commande peuvent offrir. Les possibilités sont "
"illimitées,\n"
"surtout en considérant que les entrées de type « pipe » peuvent inclure des\n"
"scripts shell aussi !\n"
"\n"
"Pour obtenir plus d'informations importantes, veuillez vous référer à la\n"
"documentation de top. Ensuite, améliorez top avec vos propres entrées\n"
"« file » et « pipe ».\n"
"\n"
"Amusez-vous !\n"

#: top/top_nls.c:542
msgid "to enable 'Y' press <Enter> then type 'W' and restart top"
msgstr ""
"pour activer « Y », appuyez sur <Entrée> puis tapez « W » et redémarrez top"

#: top/top_nls.c:544
msgid "to enable 'Y' please consult the top man page (press Enter)"
msgstr "pour activer « Y », consultez la page man de top (pressez Entrée)"

#: top/top_nls.c:546
#, c-format
msgid "Selection failed with: %s\n"
msgstr "La sélection a échoué avec: %s\n"

#: top/top_nls.c:547
#, c-format
msgid "unable to inspect, pid %d not found"
msgstr "impossible d'inspecter, pid %d pas trouvé"

#: top/top_nls.c:548
#, c-format
msgid "inspect at PID [default pid = %d]"
msgstr "inspection du PID [pid par défaut = %d]"

#: top/top_nls.c:549
#, c-format
msgid "%s: %*d-%-*d lines, %*d-%*d columns, %lu bytes read"
msgstr "%s: %*d-%-*d lignes, %*d-%*d colonnes, %lu octets lus"

#: top/top_nls.c:550
#, fuzzy
msgid "patience please, working ..."
msgstr "merci de patienter, travail en cours…"

#: top/top_nls.c:551
msgid "working, use Ctrl-C to end ..."
msgstr "travail en cour, utilisez Ctrl-C pour arrêter…"

#. Translation Hint: Below are 2 abbreviations which can be as long as needed:
#. .                 FLD = FIELD, VAL = VALUE
#: top/top_nls.c:554
#, c-format
msgid "add filter #%d (%s) as: [!]FLD?VAL"
msgstr "ajouter le filtre #%d (%s) comme: [!]FLD?VAL"

#: top/top_nls.c:555
msgid "ignoring case"
msgstr "ignore les majuscules/minuscules"

#: top/top_nls.c:556
msgid "case sensitive"
msgstr "sensible à la casse"

#: top/top_nls.c:557
msgid "duplicate filter was ignored"
msgstr "le doublon dans les filtres a été ignoré"

#: top/top_nls.c:558
#, c-format
msgid "'%s' filter delimiter is missing"
msgstr "délimiteur manquant dans le filtre « %s »"

#: top/top_nls.c:559
#, c-format
msgid "'%s' filter value is missing"
msgstr "valeur manquante dans le filtre « %s »"

#: top/top_nls.c:560
msgid "include"
msgstr "inclure"

#: top/top_nls.c:561
msgid "exclude"
msgstr "exclure"

#: top/top_nls.c:562
#, c-format
msgid "<Enter> to resume, filters: %s"
msgstr "<Enter> pour continuer, filtres: %s"

#: top/top_nls.c:563
msgid "none"
msgstr "aucun"

#. Translation Hint: The following word 'Node' should be exactly
#. 4 characters, excluding leading %%, fmt chars & colon)
#: top/top_nls.c:566
#, fuzzy, c-format
msgid "%%Node%-2d:"
msgstr "%%Nœud%-2d:"

#: top/top_nls.c:567
#, fuzzy, c-format
msgid "expand which numa node (0-%d)"
msgstr "Développer quel nœud (0-%d)"

#: top/top_nls.c:568
#, fuzzy
msgid "invalid numa node"
msgstr "nœud invalide"

#: top/top_nls.c:569
msgid "sorry, NUMA extensions unavailable"
msgstr "désolé, les extensions NUMA ne sont pas disponibles"

#. Translation Hint: 'Mem ' is an abbreviation for physical memory/ram
#. .                 'Swap' represents the linux swap file --
#. .                 please make both translations exactly 4 characters,
#. .                 padding with extra spaces as necessary
#: top/top_nls.c:574
msgid "Mem "
msgstr "Mem "

#: top/top_nls.c:575
msgid "Swap"
msgstr "Éch "

#: top/top_nls.c:576
#, c-format
msgid "library failed memory statistics, at %d: %s"
msgstr ""

#: top/top_nls.c:577
#, c-format
msgid "library failed cpu statistics, at %d: %s"
msgstr ""

#: top/top_nls.c:578
#, c-format
msgid "library failed pids statistics, at %d: %s"
msgstr ""

#: top/top_nls.c:579
#, fuzzy, c-format
msgid "bad memory scaling arg '%s'"
msgstr "mauvais argument de mise à l'échelle de la mémoire « %c »"

#: top/top_nls.c:580
#, c-format
msgid "PID to collapse/expand [default pid = %d]"
msgstr "PID à replier ou étendre [pid par défaut = %d]"

#: top/top_nls.c:581
msgid "terminal is not wide enough"
msgstr "le terminal n'est pas assez large"

#: top/top_nls.c:582
msgid "wrong mode, command inactive"
msgstr "mode incorrect, commande inactive"

#: top/top_nls.c:583
msgid "saving prevents older top from reading, save anyway?"
msgstr ""
"l'enregistrement empêche un ancien top de le lire, enregistrer malgré tout ?"

#: top/top_nls.c:584
#, fuzzy, c-format
msgid "failed sem_init() at %d: %s"
msgstr "échec de set sur le tty: %s"

#: top/top_nls.c:585
#, fuzzy, c-format
msgid "failed pthread_create() at %d: %s"
msgstr "échec à l'ouverture de /proc/stat: %s"

#: top/top_nls.c:586
msgid "sorry, restricted namespace with reduced functionality"
msgstr ""

#. Translation Notes ------------------------------------------------
#. .  It is strongly recommend that the --no-wrap command line option
#. .  be used with all supporting translation tools, when available.
#. .
#. .  The next several text groups contain special escape sequences
#. .  representing values used to index a table at run-time.
#. .
#. .  Each such sequence consists of a tilde (~) followed by an ascii
#. .  number in the range of '1' - '8'.  Examples are '~2', '~8', etc.
#. .  These escape sequences must never themselves be translated but
#. .  could be deleted.
#. .
#. .  If you remove these escape sequences (both tilde and number) it
#. .  would make translation easier.  However, the ability to display
#. .  colors and bold text at run-time will have been lost.
#. .
#. .  Additionally, each of these text groups was designed to display
#. .  in a 80x24 terminal window.  Hopefully, any translations will
#. .  adhere to that goal lest the translated text be truncated.
#. .
#. .  If you would like additional information regarding these strings,
#. .  please see the prologue to the show_special function in the top.c
#. .  source file.
#. .
#. .  Caution:
#. .    The next three items represent pages for interacting with a user.
#. .    In all cases, the last lines of text must be treated with care.
#. .
#. .    They must not end with a newline character so that at runtime the
#. .    cursor will remain on that final text line.
#. .
#. .    Also, the special sequences (tilde+number) must not appear on the
#. .    last line (the one without the newline). So please avoid any line
#. .    wraps that could place them there.
#. .
#: top/top_nls.c:631
#, fuzzy, c-format
msgid ""
"Help for Interactive Commands~2 - %s\n"
"Window ~1%s~6: ~1Cumulative mode ~3%s~2.  ~1System~6: ~1Delay ~3%.1f secs~2; "
"~1Secure mode ~3%s~2.\n"
"\n"
"  Z~5,~1B~5,E,e   Global: '~1Z~2' colors; '~1B~2' bold; '~1E~2'/'~1e~2' "
"summary/task memory scale\n"
"  l,t,m,I   Toggle: '~1l~2' load avg; '~1t~2' task/cpu; '~1m~2' memory; "
"'~1I~2' Irix mode\n"
"  0,1,2,3,4 Toggle: '~10~2' zeros; '~11~2/~12~2/~13~2' cpu/numa views; "
"'~14~2' cpus two abreast\n"
"  f,X       Fields: '~1f~2' add/remove/order/sort; '~1X~2' increase fixed-"
"width fields\n"
"\n"
"  L,&,<,> . Locate: '~1L~2'/'~1&~2' find/again; Move sort column: "
"'~1<~2'/'~1>~2' left/right\n"
"  R,H,J,C . Toggle: '~1R~2' Sort; '~1H~2' Threads; '~1J~2' Num justify; "
"'~1C~2' Coordinates\n"
"  c,i,S,j . Toggle: '~1c~2' Cmd name/line; '~1i~2' Idle; '~1S~2' Time; "
"'~1j~2' Str justify\n"
"  x~5,~1y~5     . Toggle highlights: '~1x~2' sort field; '~1y~2' running "
"tasks\n"
"  z~5,~1b~5     . Toggle: '~1z~2' color/mono; '~1b~2' bold/reverse (only if "
"'x' or 'y')\n"
"  u,U,o,O . Filter by: '~1u~2'/'~1U~2' effective/any user; '~1o~2'/'~1O~2' "
"other criteria\n"
"  n,#,^O  . Set: '~1n~2'/'~1#~2' max tasks displayed; Show: ~1Ctrl~2+'~1O~2' "
"other filter(s)\n"
"  V,v,F   . Toggle: '~1V~2' forest view; '~1v~2' hide/show children; '~1F~2' "
"keep focused\n"
"\n"
"%s  W,Y,!,^E  Write cfg '~1W~2'; Inspect '~1Y~2'; Combine Cpus '~1!~2'; "
"Scale time ~1Ctrl~2+'~1E~2'\n"
"  q         Quit\n"
"          ( commands shown with '.' require a ~1visible~2 task display "
"~1window~2 ) \n"
"Press '~1h~2' or '~1?~2' for help with ~1Windows~2,\n"
"Type 'q' or <Esc> to continue "
msgstr ""
"Aide pour les commandes interactives~2 - %s\n"
"Fenêtre ~1%s~6: ~1Mode cumulatif ~3%s~2.  ~1Système~6: ~1Délai ~3%.1lf "
"secs~2; ~1Mode sûr ~3%s~2.\n"
"\n"
"  Z~5,~1B~5,E,e   Global: «~1Z~2» couleurs; «~1B~2» gras; «~1E~2»/«~1e~2» "
"résumé/échelle mem tâches\n"
"  l,t,m,I   Commuter: «~1l~2» charge moy; «~1t~2» stats tâche/cpu; «~1m~2» "
"info mem; «~1I~2» Mode Irix\n"
"  0,1,2,3,4 Commuter: «~10~2» zéros; «~11~2/~12~2/~13~2» vues nœuds cpus ou "
"numa; «~14~2» cpus par deux\n"
"  f,F,X     Champs: «~1f~2»/«~1F~2» ajouter/supprimer/ordre/tri; «~1X~2» "
"augmenter largeur fixe\n"
"\n"
"  L,&,<,> . Identifier: «~1L~2»/«~1&~2» chercher/encore; Déplacer colonne "
"tri: «~1<~2»/«~1>~2» gauche/droite\n"
"  R,H,J,C . Commuter: «~1R~2» Tri; «~1H~2» Threads; «~1J~2» Justifier "
"nombre, «~1C~2» Coordonnées\n"
"  c,i,S,j . Commuter: «~1c~2» Nom/ligne com; «~1i~2» Repos; «~1S~2» Temps; "
"«~1j~2» Justifier chaîne\n"
"  x~5,~1y~5     . Commuter mise en évidence: «~1x~2» champ de tri; «~1y~2» "
"tâches en cours\n"
"  z~5,~1b~5     . Commuter: «~1z~2» couleur/mono; «~1b~2» gras/inverse "
"(uniquement avec « x » ou « y »)\n"
"  u,U,o,O . Filtrer par: «~1u~2»/«~1U~2» utilisateur eff/tous; "
"«~1o~2»/«~1O~2» autre critère\n"
"  n,#,^O  . Changer: «~1n~2»/«~1#~2» tâches max affichées; Montrer: "
"~1Ctrl~2+«~1O~2» autre(s) filtre(s)\n"
"  V,v     . Commuter: '~1V~2' vue forêt; '~1v~2' montrer/cacher les enfants "
"dans la vue forêt\n"
"\n"
"%s  W,Y,!     Écrire le fichier de config «~1W~2»; Inspecter autre sortie "
"«~1Y~2»; Combiner Cpus «~1!~2»\n"
"  q         Quitter\n"
"         ( commandes montrée avec « . » exigent une ~1fenêtre~2 ~1visible~2 "
"d'affichage des tâches ) \n"
"Appuyez sur «~1h̃~2» ou «~1?~2» pour l'aide sur les ~1Fenêtres~2,\n"
"Appuyez sur « q » ou « ESC » pour continuer "

#: top/top_nls.c:656
#, c-format
msgid ""
"Help for Windows / Field Groups~2 - \"Current Window\" = ~1 %s ~6\n"
"\n"
". Use multiple ~1windows~2, each with separate config opts (color,fields,"
"sort,etc)\n"
". The 'current' window controls the ~1Summary Area~2 and responds to your "
"~1Commands~2\n"
"  . that window's ~1task display~2 can be turned ~1Off~2 & ~1On~2, growing/"
"shrinking others\n"
"  . with ~1NO~2 task display, some commands will be ~1disabled~2 "
"('i','R','n','c', etc)\n"
"    until a ~1different window~2 has been activated, making it the 'current' "
"window\n"
". You ~1change~2 the 'current' window by: ~1 1~2) cycling forward/backward;"
"~1 2~2) choosing\n"
"  a specific field group; or~1 3~2) exiting the color mapping or fields "
"screens\n"
". Commands ~1available anytime   -------------~2\n"
"    A       . Alternate display mode toggle, show ~1Single~2 / ~1Multiple~2 "
"windows\n"
"    g       . Choose another field group and make it 'current', or change "
"now\n"
"              by selecting a number from: ~1 1~2 =%s;~1 2~2 =%s;~1 3~2 =%s; "
"or~1 4~2 =%s\n"
". Commands ~1requiring~2 '~1A~2' mode~1  -------------~2\n"
"    G       . Change the ~1Name~5 of the 'current' window/field group\n"
" ~1*~4  a , w   . Cycle through all four windows:  '~1a~5' Forward; '~1w~5' "
"Backward\n"
" ~1*~4  - , _   . Show/Hide:  '~1-~5' ~1Current~2 window; '~1_~5' all "
"~1Visible~2/~1Invisible~2\n"
"  The screen will be divided evenly between task displays.  But you can "
"make\n"
"  some ~1larger~2 or ~1smaller~2, using '~1n~2' and '~1i~2' commands.  Then "
"later you could:\n"
" ~1*~4  = , +   . Rebalance tasks:  '~1=~5' ~1Current~2 window; '~1+~5' "
"~1Every~2 window\n"
"              (this also forces the ~1current~2 or ~1every~2 window to "
"become visible)\n"
"\n"
"In '~1A~2' mode, '~1*~4' keys are your ~1essential~2 commands.  Please try "
"the '~1a~2' and '~1w~2'\n"
"commands plus the 'g' sub-commands NOW.  Press <Enter> to make 'Current' "
msgstr ""
"Aide pour les fenêtres / Groupes de champs~2 – « Fenêtre courante » = ~1 %s "
"~6\n"
"\n"
". Utiliser plusieurs ~1fenêtres~2, chacune avec des options de configuration "
"(couleur,champs,tri,etc)\n"
". La fenêtre « courante » contrôle la ~1zone de résumé~2 et répond à vos "
"~1Commandes~2\n"
"  . l'~1affichage de tâches~2 de cette fenêtre peut être ~1éteint~2 ou "
"~1allumé~2, agrandir/réduire les autres\n"
"  . ~1SANS~2 affichage de tâches, certaines commandes seront ~1désactivées~2 "
"(«i»,«R»,«n»,«c», etc)\n"
"    jusqu'à ce qu'une ~1fenêtre différente~2 soit activée et devienne la "
"fenêtre « courante »\n"
". Vous ~1changez~2 la fenêtre « courante » en: ~1 1~2) rotation avant/"
"arrière;~1 2~2) choisissant\n"
"  un group de champ spécifique; ou~1 3~2) sortant des écrans de "
"correspondance des couleurs ou des champs\n"
". Commandes ~1disponibles tout le temps   -------------~2\n"
"    A        . Basculer vers le mode d'affichage alternatif, montrer "
"~1Une~2 / ~1Plusieurs~2 fenêtres\n"
"    g        . Choisir un autre groupe de champs et le rendre « courant », "
"ou changer maintenant\n"
"               en choisissant un nombre:  ~1 1~2 =%s;~1 2~2 =%s;~1 3~2 =%s; "
"ou~1 4~2 =%s\n"
". Commandes ~1exigeant~2 le mode «~1A~2»~1  -------------~2\n"
"    G        . Changer le ~1Nom~2 de la fenêtre/groupe de champs "
"« courant »\n"
" ~1*~4  a , w   . Rotation par toutes les quatre fenêtres: «~1a~5» avant, "
"«~1w~5» arrière\n"
" ~1*~4  - , _   . Montrer/cacher: «~1-~5» fenêtre « courante »; «~1_~5» "
"toutes ~1Visibles~2/~1Invisibles~2\n"
" L'écran sera divisé de manière équitable entre les affichages de tâches. "
"Mais vous pouvez en rendre\n"
" certaines plus ~1larges~2 ou plus ~1petites~2 en utilisant les commandes  "
"«~1n~2» et «~1i~2».\n"
" Vous pouvez ensuite:\n"
" ~1*~4  = , +   . Ré-équilibrer les tâches: «~1=~5» fenêtre ~1courante~2; "
"«~1+̃5» ~1toutes~2 fenêtres\n"
"              (ceci force aussi la fenêtre ~1courante~2 ou ~1toutes~2 les "
"fenêtres à devenir visibles)\n"
"\n"
"En mode «~1A~2», les touches «~1*~4» sont vos commandes ~1essentielles~2. "
"Essayez les commandes «~1a~2»\n"
"et «~1w~2» ainsi que les sous-commandes «g» MAINTENANT. Appuyez sur "
"« Entrée » pour rendre « courant » "

#. Translation Notes ------------------------------------------------
#. .  The following 'Help for color mapping' simulated screen should
#. .  probably NOT be translated.  It is terribly hard to follow in
#. .  this form and any translation could produce unpleasing results
#. .  that are unlikely to parallel the running top program.
#. .
#. .  If you decide to proceed with translation, please take care
#. .  to not disturb the spaces and the tilde + number delimiters.
#. .
#: top/top_nls.c:691
#, fuzzy, c-format
msgid ""
"Help for color mapping~2 - \"Current Window\" = ~1 %s ~6\n"
"\n"
"   color - 04:25:44 up 8 days, 50 min,  7 users,  load average:\n"
"   Tasks:~3  64 ~2total,~3   2 ~3running,~3  62 ~2sleeping,~3   0 ~2stopped,"
"~3\n"
"   %%Cpu(s):~3  76.5 ~2user,~3  11.2 ~2system,~3   0.0 ~2nice,~3  12.3 "
"~2idle~3\n"
"   ~1 Nasty Message! ~4  -or-  ~1Input Prompt~5\n"
"   ~1  PID TTY     PR  NI %%CPU    TIME+   VIRT SWAP S COMMAND    ~6\n"
"   17284 ~8pts/2  ~7  8   0  0.0   0:00.75  1380    0 S /bin/bash   ~8\n"
"   ~1 8601 pts/1    7 -10  0.4   0:00.03   916    0 R color -b -z~7\n"
"   11005 ~8?      ~7  9   0  0.0   0:02.50  2852 1008 S amor -sessi~8\n"
"   available toggles: ~1B~2 =disable bold globally (~1%s~2),\n"
"       ~1z~2 =color/mono (~1%s~2), ~1b~2 =tasks \"bold\"/reverse (~1%s~2)\n"
"\n"
"1) Select a ~1target~2 as an upper case letter, ~1current target~2 is ~1 %c "
"~4:\n"
"   S~2 = Summary Data,~1  M~2 = Messages/Prompts,\n"
"   H~2 = Column Heads,~1  T~2 = Task Information\n"
"2) Select a ~1color~2 as a number or use the up/down arrow keys\n"
"   to raise/lower the %d colors value, ~1current color~2 is ~1 %d ~4:\n"
"   0~2 = black,~1  1~2 = red,    ~1  2~2 = green,~1  3~2 = yellow,\n"
"   4~2 = blue, ~1  5~2 = magenta,~1  6~2 = cyan, ~1  7~2 = white\n"
"\n"
"3) Then use these keys when finished:\n"
"   'q' or <Esc> to abort changes to window '~1%s~2'\n"
"   'a' or 'w' to commit & change another, <Enter> to commit and end "
msgstr ""
"Aide pour la correspondance des couleurs~2 - « Fenêtre Actuelle » = ~1 %s "
"~6\n"
"\n"
"   couleur - 04:25:44 up 8 jours, 50 min,  7 utilisateurs,  charge moyenne:\n"
"   Tâches:~3  64 ~2total,~3   2 ~3exécutée,~3  62 ~2endormie,~3   0 "
"~2arrêtée,~3\n"
"   %%Cpu(s):~3  76.5 ~2util.,~3  11.2 ~2système,~3   0.0 ~2nice,~3  12.3 "
"~2inactif~3\n"
"   ~1 Message méchant! ~4  -or-  ~1Invite d'entrée~5\n"
"   ~1  PID TTY     PR  NI %%CPU    TEMPS+   VIRT SWAP S COMMANDE    ~6\n"
"   17284 ~8pts/2  ~7  8   0  0.0   0:00.75  1380    0 S /bin/bash   ~8\n"
"   ~1 8601 pts/1    7 -10  0.4   0:00.03   916    0 R couleur -b -z~7\n"
"   11005 ~8?      ~7  9   0  0.0   0:02.50  2852 1008 S amor -sessi~8\n"
"   commutateurs disponibles: ~1B~2 =désactive gras globalement (~1%s~2),\n"
"       ~1z~2 =couleur/mono (~1%s~2), ~1b~2 =tâches \"gras\"/inversé "
"(~1%s~2)\n"
"\n"
"1) Choisissez une ~1cible~2 en lettre majuscule, la ~1cible actuelle~2 est "
"~1 %c ~4:\n"
"   S~2 = Données résumées,~1  M~2 = Messages/Invites,\n"
"   H~2 = En-têtes de colonnes,~1  T~2 = Informations tâches\n"
"2) Choisissez une ~1couleur~2 par un nombre ou utilisez les flèches haut/"
"bas\n"
"   pour augmenter/diminuer la valeur des %d couleurs, la ~1couleur "
"actuelle~2 est ~1 %d ~4:\n"
"   0~2 = noir,~1   1~2 = rouge,  ~1  2~2 = vert ,~1  3~2 = jaune,\n"
"   4~2 = bleu, ~1  5~2 = magenta,~1  6~2 = cyan, ~1  7~2 = blanc\n"
"\n"
"3) Utilisez ensuite ces touches pour terminer:\n"
"   'q' ou « Échap » pour annuler les changements à la fenêtre '~1%s~2'\n"
"   'a' ou 'w' pour valider et changer une autre, <Entrée> pour valider et "
"terminer "

#. Translation Hint: As is true for the text above, the "keys" shown to the left and
#. .                 also imbedded in the translatable text (along with escape seqs)
#. .                 should never themselves be translated.
#: top/top_nls.c:720
msgid ""
"  k,r       Manipulate tasks: '~1k~2' kill; '~1r~2' renice\n"
"  d or s    Set update interval\n"
msgstr ""
"  k,r       Manipuler les tâches: «~1k̃~2» tuer; «~1r~2» courtoisie\n"
"  d ou s    Changer l'intervalle de mise à jour\n"

#. Translation Hint:
#. .  This Fields Management header should be 3 lines long so as
#. .  to allow 1 blank line before the fields & descriptions.
#. .  If absoultely necessary, 4 lines could be used (but never more).
#. .
#: top/top_nls.c:729
#, c-format
msgid ""
"Fields Management~2 for window ~1%s~6, whose current sort field is ~1%s~2\n"
"   Navigate with Up/Dn, Right selects for move then <Enter> or Left "
"commits,\n"
"   'd' or <Space> toggles display, 's' sets sort.  Use 'q' or <Esc> to end!\n"
msgstr ""
"Gestion des champs~2 pour la fenêtre ~1%s~6 qui trie selon le champ ~1%s~2\n"
"   Naviguer avec Haut/Bas, Droit sélectionne pour le déplacement puis "
"<Entrée> ou Gauche applique le changement,\n"
"   'd' ou <Espace> bascule l'affichage, 's' change le tri. Utiliser 'q' ou "
"<Echap> pour terminer !\n"

#. Translation Hint:
#. .  The next 5 items must each be translated as a single line.
#. .
#: top/top_nls.c:737
#, c-format
msgid ""
"%s:~3 %3u ~2total,~3 %3u ~2running,~3 %3u ~2sleeping,~3 %3u ~2stopped,~3 %3u "
"~2zombie~3\n"
msgstr ""
"%s:~3 %3u ~2total,~3 %3u ~2en cours,~3 %3u ~2en veille,~3 %3u ~2arrêté,~3 "
"%3u ~2zombie~3\n"

#. Translation Hint: Only the following abbreviations need be translated
#. .                 us = user, sy = system, ni = nice, id = idle, wa = wait,
#. .                 hi hardware interrupt, si = software interrupt
#: top/top_nls.c:743
#, fuzzy, c-format
msgid ""
"%s~3 %#5.1f ~2us,~3 %#5.1f ~2sy,~3 %#5.1f ~2ni,~3 %#5.1f ~2id,~3 %#5.1f ~2wa,"
"~3 %#5.1f ~2hi,~3 %#5.1f ~2si~3"
msgstr ""
"%s~3 %#5.1f ~2ut,~3 %#5.1f ~2sy,~3 %#5.1f ~2ni,~3 %#5.1f ~2id,~3 %#5.1f ~2wa,"
"~3 %#5.1f ~2hi,~3 %#5.1f ~2si~3"

#. Translation Hint: Only the following abbreviations need be translated
#. .                 us = user, sy = system, ni = nice, id = idle, wa = wait,
#. .                 hi hardware interrupt, si = software interrupt, st = steal time
#: top/top_nls.c:749
#, fuzzy, c-format
msgid ""
"%s~3%#5.1f ~2us,~3%#5.1f ~2sy,~3%#5.1f ~2ni,~3%#5.1f ~2id,~3%#5.1f ~2wa,"
"~3%#5.1f ~2hi,~3%#5.1f ~2si,~3%#5.1f ~2st~3"
msgstr ""
"%s~3%#5.1f ~2ut,~3%#5.1f ~2sy,~3%#5.1f ~2ni,~3%#5.1f ~2id,~3%#5.1f ~2wa,"
"~3%#5.1f ~2hi,~3%#5.1f ~2si,~3%#5.1f ~2st~3"

#. Translation Hint: next 2 must be treated together, with WORDS above & below aligned
#: top/top_nls.c:753
#, fuzzy, c-format
msgid ""
"%s %s:~3 %9.9s~2total,~3 %9.9s~2free,~3 %9.9s~2used,~3 %9.9s~2buff/"
"cache~3    "
msgstr ""
"%s %s:~3 %9.9s~2total,~3 %9.9s~2libr,~3 %9.9s~2util,~3 %9.9s~2tamp/cache~3\n"
"%s %s:~3 %9.9s~2total,~3 %9.9s~2libr,~3 %9.9s~2util.~3 %9.9s~2dispo %s~3\n"

#: top/top_nls.c:755
#, fuzzy, c-format
msgid ""
"%s %s:~3 %9.9s~2total,~3 %9.9s~2free,~3 %9.9s~2used.~3 %9.9s~2avail %s~3"
msgstr ""
"%s %s:~3 %9.9s~2total,~3 %9.9s~2libr,~3 %9.9s~2util,~3 %9.9s~2tamp/cache~3\n"
"%s %s:~3 %9.9s~2total,~3 %9.9s~2libr,~3 %9.9s~2util.~3 %9.9s~2dispo %s~3\n"

#. Translation Hint:
#. .  The next 2 headers for 'Inspection' must each be 3 lines or less
#. .
#: top/top_nls.c:761
#, c-format
msgid ""
"Inspection~2 Pause at: pid ~1%d~6, running ~1%s~6\n"
"Use~2:  left/right then <Enter> to ~1select~5 an option; 'q' or <Esc> to "
"~1end~5 !\n"
"Options~2: ~1%s\n"
msgstr ""
"Inspection~2 Pause à: pid ~1%d~6 en cours ~1%s~6\n"
"Usage~2:  gauche/droite puis <Entrée> pour ~1sélectionner~5 une option; "
"« q » ou <Éch> pour ~1terminer~5 !\n"
"Options~2: ~1%s\n"

#: top/top_nls.c:766
#, c-format
msgid ""
"Inspection~2 View at pid: ~1%s~3, running ~1%s~3.  Locating: ~1%s~6\n"
"Use~2:  left/right/up/down/etc to ~1navigate~5 the output; 'L'/'&' to "
"~1locate~5/~1next~5.\n"
"Or~2:   <Enter> to ~1select another~5; 'q' or <Esc> to ~1end~5 !\n"
msgstr ""
"Inspection~2 Vue au pid: ~1%s~3, exécution ~1%s~3.  Position: ~1%s~6\n"
"Usage~2:  gauche/droite/haut/bas/etc pour ~1naviguer~5 dans la sortie; "
"« L »/« & » pour ~1trouver~5/~1suivant~5.\n"
"Ou~2:   <Entrée> pour ~1sélectionner une autre~5; « q » or <Éch> pour "
"~1terminer~5 !\n"

#: uptime.c:47 uptime.c:119
msgid "Cannot get system uptime"
msgstr ""

#: uptime.c:63
msgid " -p, --pretty   show uptime in pretty format\n"
msgstr ""
" -p, --pretty   montre le temps de fonctionnement dans un joli format\n"

#: uptime.c:65
msgid " -s, --since    system up since\n"
msgstr " -s, --since    système en route depuis\n"

#: vmstat.c:224
#, c-format
msgid " %s [options] [delay [count]]\n"
msgstr " %s [options] [délai [décompte]]\n"

#: vmstat.c:227
msgid " -a, --active           active/inactive memory\n"
msgstr " -a, --active           active/désactive la mémoire\n"

#: vmstat.c:228
msgid " -f, --forks            number of forks since boot\n"
msgstr " -f, --forks            nombre de forks depuis l'amorçage\n"

#: vmstat.c:229
msgid " -m, --slabs            slabinfo\n"
msgstr " -m, --slabs            slabinfo\n"

#: vmstat.c:230
msgid " -n, --one-header       do not redisplay header\n"
msgstr " -n, --one-header       ne réaffiche pas l'en-tête\n"

#: vmstat.c:231
msgid " -s, --stats            event counter statistics\n"
msgstr " -s, --stats            statistiques du compteur d'événements\n"

#: vmstat.c:232
msgid " -d, --disk             disk statistics\n"
msgstr " -d, --disk             statistiques du disque\n"

#: vmstat.c:233
msgid " -D, --disk-sum         summarize disk statistics\n"
msgstr " -D, --disks-sum        résume les statistiques du disque\n"

#: vmstat.c:234
msgid " -p, --partition <dev>  partition specific statistics\n"
msgstr " -p, --partition <dev>  statistiques spécifiques à la partition\n"

#: vmstat.c:235
msgid " -S, --unit <char>      define display unit\n"
msgstr " -S, --unit <char>      défini les unités d'affichage\n"

#: vmstat.c:236
msgid " -w, --wide             wide output\n"
msgstr " -w, --wide             sortie large\n"

#: vmstat.c:237
msgid " -t, --timestamp        show timestamp\n"
msgstr " -t, --timestamp        affiche l'horodatage\n"

#: vmstat.c:238
#, fuzzy
msgid " -y, --no-first         skips first line of output\n"
msgstr " -w, --wide             sortie large\n"

#: vmstat.c:257
msgid ""
"procs -----------memory---------- ---swap-- -----io---- -system-- ------"
"cpu-----"
msgstr ""
"procs ----------mémoire---------- -échange- -----io---- -système- ------"
"cpu-----"

#: vmstat.c:259
#, fuzzy
msgid ""
"--procs-- -----------------------memory---------------------- ---swap-- -----"
"io---- -system-- ----------cpu----------"
msgstr ""
"--procs-- -----------------------mémoire--------------------- -échange- -----"
"io---- -système- --------cpu--------"

#: vmstat.c:260 vmstat.c:616
msgid " -----timestamp-----"
msgstr " -----horodatage----"

#. Translation Hint: max 2 chars
#: vmstat.c:279
msgid "r"
msgstr "r"

#. Translation Hint: max 2 chars
#: vmstat.c:281
msgid "b"
msgstr "b"

#. Translation Hint: max 6 chars
#: vmstat.c:283
msgid "swpd"
msgstr "swpd"

#. Translation Hint: max 6 chars
#: vmstat.c:285
msgid "free"
msgstr "libre"

#. Translation Hint: max 6 chars
#: vmstat.c:287
msgid "inact"
msgstr "inact"

#. Translation Hint: max 6 chars
#: vmstat.c:289
msgid "buff"
msgstr "tampon"

#. Translation Hint: max 6 chars
#: vmstat.c:291
msgid "active"
msgstr "actif"

#. Translation Hint: max 6 chars
#: vmstat.c:293
msgid "cache"
msgstr "cache"

#. Translation Hint: max 4 chars
#: vmstat.c:295
msgid "si"
msgstr "si"

#. Translation Hint: max 4 chars
#: vmstat.c:297
msgid "so"
msgstr "so"

#. Translation Hint: max 5 chars
#: vmstat.c:299
msgid "bi"
msgstr "bi"

#. Translation Hint: max 5 chars
#: vmstat.c:301
msgid "bo"
msgstr "bo"

#. Translation Hint: max 4 chars
#: vmstat.c:303
msgid "in"
msgstr "in"

#. Translation Hint: max 4 chars
#: vmstat.c:305
msgid "cs"
msgstr "cs"

#. Translation Hint: max 2 chars
#: vmstat.c:307
msgid "us"
msgstr "us"

#. Translation Hint: max 2 chars
#: vmstat.c:309
msgid "sy"
msgstr "sy"

#. Translation Hint: max 2 chars
#: vmstat.c:311
msgid "id"
msgstr "id"

#. Translation Hint: max 2 chars
#: vmstat.c:313
msgid "wa"
msgstr "wa"

#. Translation Hint: max 2 chars
#: vmstat.c:315
msgid "st"
msgstr "st"

#. Translation Hint: max 2 chars
#: vmstat.c:317
msgid "gu"
msgstr ""

#: vmstat.c:378 vmstat.c:867
#, fuzzy
msgid "Unable to create vmstat structure"
msgstr "impossible de créer les tubes IPC"

#: vmstat.c:380 vmstat.c:863 vmstat.c:916
msgid "Unable to create system stat structure"
msgstr ""

#: vmstat.c:391 vmstat.c:871
msgid "Unable to select memory information"
msgstr ""

#: vmstat.c:405 vmstat.c:458 vmstat.c:865
msgid "Unable to select stat information"
msgstr ""

#. Translation Hint: Translating folloging disk partition
#. * header fields that follow (marked with max x chars) might
#. * not work, unless manual page is translated as well.
#. Translation Hint: max 10 chars
#: vmstat.c:562
msgid "reads"
msgstr "lectures"

#. Translation Hint: max 16 chars
#: vmstat.c:564
msgid "read sectors"
msgstr "secteurs lus"

#. Translation Hint: max 10 chars
#: vmstat.c:566
msgid "writes"
msgstr "écritures"

#. Translation Hint: max 16 chars
#: vmstat.c:568
msgid "requested writes"
msgstr "écritures dem"

#: vmstat.c:581 vmstat.c:684 vmstat.c:810
msgid "Unable to create diskstat structure"
msgstr ""

#: vmstat.c:584 vmstat.c:590
#, fuzzy, c-format
msgid "Disk/Partition %s not found"
msgstr "la partition n'a pas été trouvée\n"

#: vmstat.c:613
msgid ""
"disk- ------------reads------------ ------------writes----------- -----"
"IO------"
msgstr ""
"disq- -----------lectures--------- -----------écritures--------- -----"
"ES------"

#: vmstat.c:615
msgid ""
"disk- -------------------reads------------------- -------------------"
"writes------------------ ------IO-------"
msgstr ""
"disq- ------------------lectures----------------- ------------------"
"écritures---------------- ------ES-------"

#. Translation Hint: max 6 chars
#: vmstat.c:634 vmstat.c:642
msgid "total"
msgstr "total"

#. Translation Hint: max 6 chars
#: vmstat.c:636 vmstat.c:644
msgid "merged"
msgstr "fusion"

#. Translation Hint: max 7 chars
#: vmstat.c:638 vmstat.c:646
msgid "sectors"
msgstr "secteurs"

#. Translation Hint: max 7 chars
#: vmstat.c:640 vmstat.c:648
msgid "ms"
msgstr "ms"

#. Translation Hint: max 6 chars
#: vmstat.c:650
msgid "cur"
msgstr "cur"

#. Translation Hint: max 6 chars
#: vmstat.c:652
msgid "sec"
msgstr "sec"

#: vmstat.c:691 vmstat.c:812
msgid "Unable to retrieve disk statistics"
msgstr ""

#. Translation Hint: Translating folloging slab fields that
#. * follow (marked with max x chars) might not work, unless
#. * manual page is translated as well.
#. Translation Hint: max 24 chars
#: vmstat.c:738
msgid "Cache"
msgstr "Cache"

#. Translation Hint: max 6 chars
#: vmstat.c:740
msgid "Num"
msgstr "#"

#. Translation Hint: max 6 chars
#: vmstat.c:742
msgid "Total"
msgstr "Total"

#. Translation Hint: max 6 chars
#: vmstat.c:744
msgid "Size"
msgstr "Taille"

#. Translation Hint: max 6 chars
#: vmstat.c:746
msgid "Pages"
msgstr "Pages"

#: vmstat.c:833
#, fuzzy, c-format
msgid "%13d disks\n"
msgstr "%13d disques \n"

#: vmstat.c:834
#, fuzzy, c-format
msgid "%13d partitions\n"
msgstr "%13d partitions \n"

#: vmstat.c:835
#, c-format
msgid "%13lu total reads\n"
msgstr "%13lu lectures totales\n"

#: vmstat.c:836
#, c-format
msgid "%13lu merged reads\n"
msgstr "%13lu lectures fusionnées\n"

#: vmstat.c:837
#, c-format
msgid "%13lu read sectors\n"
msgstr "%13lu secteurs lus\n"

#: vmstat.c:838
#, c-format
msgid "%13lu milli reading\n"
msgstr "%13lu temps lectures (ms)\n"

#: vmstat.c:839
#, c-format
msgid "%13lu writes\n"
msgstr "%13lu écritures\n"

#: vmstat.c:840
#, c-format
msgid "%13lu merged writes\n"
msgstr "%13lu écritures fusionnées\n"

#: vmstat.c:841
#, c-format
msgid "%13lu written sectors\n"
msgstr "%13lu secteurs écrits\n"

#: vmstat.c:842
#, c-format
msgid "%13lu milli writing\n"
msgstr "%13lu temps écritures (ms)\n"

#: vmstat.c:843
#, c-format
msgid "%13lu inprogress IO\n"
msgstr "%13lu E/S en cours\n"

#: vmstat.c:844
#, c-format
msgid "%13lu milli spent IO\n"
msgstr "%13lu temps E/S consommés (ms)\n"

#: vmstat.c:845
#, fuzzy, c-format
msgid "%13lu milli weighted IO\n"
msgstr "%13lu temps E/S consommés (ms)\n"

#: vmstat.c:873
#, c-format
msgid "%13lu %s total memory\n"
msgstr "%13lu %s mémoire totale\n"

#: vmstat.c:874
#, c-format
msgid "%13lu %s used memory\n"
msgstr "%13lu %s mémoire utilisée\n"

#: vmstat.c:875
#, c-format
msgid "%13lu %s active memory\n"
msgstr "%13lu %s mémoire active\n"

#: vmstat.c:876
#, c-format
msgid "%13lu %s inactive memory\n"
msgstr "%13lu %s mémoire inactive\n"

#: vmstat.c:877
#, c-format
msgid "%13lu %s free memory\n"
msgstr "%13lu %s mémoire libre\n"

#: vmstat.c:878
#, c-format
msgid "%13lu %s buffer memory\n"
msgstr "%13lu %s mémoire tampon\n"

#: vmstat.c:879
#, c-format
msgid "%13lu %s swap cache\n"
msgstr "%13lu %s mémoire échange\n"

#: vmstat.c:880
#, c-format
msgid "%13lu %s total swap\n"
msgstr "%13lu %s échange total\n"

#: vmstat.c:881
#, c-format
msgid "%13lu %s used swap\n"
msgstr "%13lu %s échange utilisé\n"

#: vmstat.c:882
#, c-format
msgid "%13lu %s free swap\n"
msgstr "%13lu %s partition d'échange libre\n"

#: vmstat.c:883
#, c-format
msgid "%13lld non-nice user cpu ticks\n"
msgstr "%13lld tics du cpu utilisateur non-courtois\n"

#: vmstat.c:884
#, c-format
msgid "%13lld nice user cpu ticks\n"
msgstr "%13lld tics cpu utilisateur courtois\n"

#: vmstat.c:885
#, c-format
msgid "%13lld system cpu ticks\n"
msgstr "%13lld tics cpu système\n"

#: vmstat.c:886
#, c-format
msgid "%13lld idle cpu ticks\n"
msgstr "%13lld tics cpu inactif\n"

#: vmstat.c:887
#, c-format
msgid "%13lld IO-wait cpu ticks\n"
msgstr "%13lld tics cpu attente E/S\n"

#: vmstat.c:888
#, c-format
msgid "%13lld IRQ cpu ticks\n"
msgstr "%13lld tics cpu IRQ\n"

#: vmstat.c:889
#, c-format
msgid "%13lld softirq cpu ticks\n"
msgstr "%13lld tics cpu IRQ soft\n"

#: vmstat.c:890
#, c-format
msgid "%13lld stolen cpu ticks\n"
msgstr "%13lld tics cpu volés\n"

#: vmstat.c:891
#, fuzzy, c-format
msgid "%13lld non-nice guest cpu ticks\n"
msgstr "%13lld tics du cpu utilisateur non-courtois\n"

#: vmstat.c:892
#, fuzzy, c-format
msgid "%13lld nice guest cpu ticks\n"
msgstr "%13lld tics cpu utilisateur courtois\n"

#: vmstat.c:893
#, fuzzy, c-format
msgid "%13lu K paged in\n"
msgstr "%13lu pages lues depuis le disque\n"

#: vmstat.c:894
#, fuzzy, c-format
msgid "%13lu K paged out\n"
msgstr "%13lu pages écrites sur le disque\n"

#: vmstat.c:895
#, c-format
msgid "%13lu pages swapped in\n"
msgstr "%13lu pages mises en mémoire d'échange\n"

#: vmstat.c:896
#, c-format
msgid "%13lu pages swapped out\n"
msgstr "%13lu pages sorties de la mémoire d'échange\n"

#: vmstat.c:897
#, fuzzy, c-format
msgid "%13lu interrupts\n"
msgstr "%13u interruptions\n"

#: vmstat.c:898
#, fuzzy, c-format
msgid "%13lu CPU context switches\n"
msgstr "%13u changements de contexte CPU\n"

#: vmstat.c:899
#, fuzzy, c-format
msgid "%13lu boot time\n"
msgstr "%13u heure d'amorçage\n"

#: vmstat.c:900 vmstat.c:918
#, fuzzy, c-format
msgid "%13lu forks\n"
msgstr "%13u clonages\n"

#. Translation Hint: do not change argument characters
#: vmstat.c:1021
msgid "-S requires k, K, m or M (default is KiB)"
msgstr "-S requiert k, K, m ou M (KiB par défaut)"

#: watch.c:91
#, c-format
msgid " %s [options] command\n"
msgstr " %s [options] commande\n"

#: watch.c:93
msgid "  -b, --beep             beep if command has a non-zero exit\n"
msgstr ""
"  -b, --beep             émet un bip si la commande sort avec un code non "
"nul\n"

#: watch.c:94
msgid "  -c, --color            interpret ANSI color and style sequences\n"
msgstr ""
"  -c, --color            interprète les séquences de couleurs et de styles "
"ANSI\n"

#: watch.c:95
msgid ""
"  -d, --differences[=<permanent>]\n"
"                         highlight changes between updates\n"
msgstr ""
"  -d, --differences[=<permanent>]\n"
"                         met en évidence les changements entre mises à "
"jours\n"

#: watch.c:97
msgid "  -e, --errexit          exit if command has a non-zero exit\n"
msgstr ""
"  -e, --errexit          termine si la commande sort avec un code non nul\n"

#: watch.c:98
msgid "  -g, --chgexit          exit when output from command changes\n"
msgstr ""
"  -g, --chgexit          termine quand la sortie de la commande change\n"

#: watch.c:99
msgid "  -n, --interval <secs>  seconds to wait between updates\n"
msgstr "  -n, --interval <sec>   secondes de délai entre mises à jours\n"

#: watch.c:100
msgid "  -p, --precise          attempt run command in precise intervals\n"
msgstr ""
"  -p, --precise          essaie d'exécuter la commande à intervalles "
"réguliers\n"

#: watch.c:101
msgid "  -t, --no-title         turn off header\n"
msgstr "  -t, --no-title         masque l'en-tête\n"

#: watch.c:102
msgid "  -w, --no-wrap          turn off line wrapping\n"
msgstr "  -w, --no-wrap          désactive le retour à la ligne\n"

#: watch.c:103
msgid "  -x, --exec             pass command to exec instead of \"sh -c\"\n"
msgstr ""
"  -x, --exec             passe la commande à exec au lieu de « sh -c »\n"

#: watch.c:106
msgid " -v, --version  output version information and exit\n"
msgstr " -v, --version  affiche les informations de version et sort\n"

#: watch.c:480
#, c-format
msgid "Every %.1fs: "
msgstr "Toutes les %.1lfs: "

#: watch.c:481
#, c-format
msgid "%s: %s"
msgstr "%s: %s"

#: watch.c:568
msgid "unable to create IPC pipes"
msgstr "impossible de créer les tubes IPC"

#: watch.c:578
msgid "unable to fork process"
msgstr "impossible de clôner le processus"

#: watch.c:583
msgid "dup2 failed"
msgstr "dup2 a échoué"

#: watch.c:590
#, c-format
msgid "unable to execute '%s'"
msgstr "impossible d'exécuter « %s »"

#: watch.c:607
msgid "fdopen"
msgstr "fdopen"

#: watch.c:759
msgid "waitpid"
msgstr "waitpid"

#: watch.c:767
msgid "command exit with a non-zero status, press a key to exit"
msgstr ""
"la commande s'est terminée avec un statut non nul, pressez une touche pour "
"terminer"

#: watch.c:820
msgid "Could not parse interval from WATCH_INTERVAL"
msgstr "Impossible d'analyser l'intervalle dans WATCH_INTERVAL"

#: watch.c:901
#, c-format
msgid "unicode handling error\n"
msgstr "erreur de gestion de unicode\n"

#: watch.c:907
#, c-format
msgid "unicode handling error (malloc)\n"
msgstr "erreur de gestion de unicode (malloc)\n"

#: w.c:254 w.c:269
#, c-format
msgid " %2ludays"
msgstr "%2lujours"

#. Translation Hint: Minutes:Seconds
#. Translation Hint: Hours:Minutes
#: w.c:263 w.c:273
#, c-format
msgid " %2lu:%02um"
msgstr " %2lu:%02um"

#. Translation Hint: Seconds:Centiseconds
#: w.c:281
#, c-format
msgid " %2lu.%02us"
msgstr " %2lu.%02us"

#: w.c:524
#, fuzzy, c-format
msgid " %s [options] [user]\n"
msgstr " %s [options] [tty]\n"

#: w.c:526
msgid " -h, --no-header     do not print header\n"
msgstr " -h, --no-header     n'affiche pas l'en-tête\n"

#: w.c:527
msgid " -u, --no-current    ignore current process username\n"
msgstr ""
" -u, --no-current    ignore le nom d'utilisateur du processus courant\n"

#: w.c:528
msgid " -s, --short         short format\n"
msgstr " -s, --short         format court\n"

#: w.c:529
msgid " -f, --from          show remote hostname field\n"
msgstr " -f, --from          montre le champ du nom d'hôte distant\n"

#: w.c:530
msgid " -o, --old-style     old style output\n"
msgstr " -o, --old-style     sortie dans l'ancien style\n"

#: w.c:531
msgid ""
" -i, --ip-addr       display IP address instead of hostname (if possible)\n"
msgstr ""
" -i, --ip-addr       affiche l'adresse IP au lieu du nom d'hôte (si "
"possible)\n"

#: w.c:625
#, c-format
msgid ""
"User length environment PROCPS_USERLEN must be between 8 and %i, ignoring.\n"
msgstr ""
"la longueur « utilisateur » dans l'environnement PROCPS_USERLEN doit être "
"entre 8 et %i, ignoré.\n"

#: w.c:635
#, c-format
msgid ""
"from length environment PROCPS_FROMLEN must be between 8 and %d, ignoring\n"
msgstr ""
"la longueur « de » dans l'environnement PROCPS_FROMLEN doit être entre 8 et "
"%d, ignoré.\n"

#. Translation Hint: Following five uppercase messages are
#. * headers. Try to keep alignment intact.
#: w.c:661
#, c-format
msgid "%-*s TTY      "
msgstr "%-*s TTY      "

#: w.c:663
msgid "FROM"
msgstr "DE  "

#: w.c:665
#, c-format
msgid "  LOGIN@   IDLE   JCPU   PCPU WHAT\n"
msgstr "  LOGIN@   IDLE   JCPU   PCPU QUOI\n"

#: w.c:667
#, c-format
msgid "   IDLE WHAT\n"
msgstr "   IDLE QUOI\n"

#: include/c.h:153
msgid ""
"\n"
"Usage:\n"
msgstr ""
"\n"
"Usage:\n"

#: include/c.h:154
msgid ""
"\n"
"Options:\n"
msgstr ""
"\n"
"Options:\n"

#: include/c.h:155
msgid "\n"
msgstr "\n"

#: include/c.h:156
msgid " -h, --help     display this help and exit\n"
msgstr " -h, --help     affiche cette aide et termine\n"

#: include/c.h:157
msgid " -V, --version  output version information and exit\n"
msgstr " -V, --version  affiche les informations de version et termine\n"

#: include/c.h:158
#, c-format
msgid ""
"\n"
"For more details see %s.\n"
msgstr ""
"\n"
"Pour plus de détails, consultez %s.\n"

#: include/c.h:160
#, c-format
msgid "%s from %s\n"
msgstr "%s de %s\n"

#, c-format
#~ msgid "error: not enough memory\n"
#~ msgstr "erreur: pas assez de mémoire\n"

#, c-format
#~ msgid "error: can not access /proc\n"
#~ msgstr "erreur: pas d'accès à /proc\n"

#, c-format
#~ msgid "unknown page size (assume 4096)\n"
#~ msgstr "taille de page inconnue (4096 supposé)\n"

#, c-format
#~ msgid "cannot open file %s"
#~ msgstr "impossible d'ouvrir le fichier %s"

#, c-format
#~ msgid "something at line %d\n"
#~ msgstr "quelque chose à la ligne %d\n"

#, c-format
#~ msgid "\"%s\" must be of the form name=value"
#~ msgstr "« %s » doit être au format nom=valeur"

#, c-format
#~ msgid "malformed setting \"%s\""
#~ msgstr "paramètre malformé « %s »"

#, c-format
#~ msgid "%s is deprecated, value not set"
#~ msgstr "%s est déprécié, valeur pas changée"

#, c-format
#~ msgid ""
#~ "  %s\n"
#~ "Usage:\n"
#~ "  %s%s"
#~ msgstr ""
#~ "  %s\n"
#~ "Usage:\n"
#~ "  %s%s"

#, c-format
#~ msgid "failed openproc: %s"
#~ msgstr "échec de openproc: %s"

#, c-format
#~ msgid "-%c requires argument"
#~ msgstr "-%c exige un paramètre"

#, fuzzy
#~ msgid ""
#~ " -hv | -bcEHiOSs1 -d secs -n max -u|U user -p pid(s) -o field -w [cols]"
#~ msgstr ""
#~ " -hv | -bcEeHiOSs1 -d sec -n max -u|U util -p pid(s) -o champ -w [col]"

#~ msgid "failed /proc/stat read"
#~ msgstr "échec lors de la lecture de /proc/stat"

#, fuzzy, c-format
#~ msgid ""
#~ "%%%s~3 %#5.1f  ~2user,~3 %#5.1f  ~2system,~3 %#5.1f  ~2nice,~3 %#5.1f  "
#~ "~2idle~3\n"
#~ msgstr ""
#~ "%s~3 %#5.1f ~2util.,~3 %#5.1f ~2système,~3 %#5.1f ~2courtoisie,~3 %#5.1f "
#~ "~2inactif~3"

#, fuzzy, c-format
#~ msgid ""
#~ "%%%s~3 %#5.1f  ~2user,~3 %#5.1f  ~2system,~3 %#5.1f  ~2nice,~3 %#5.1f  "
#~ "~2idle,~3 %#5.1f  ~2IO-wait~3\n"
#~ msgstr ""
#~ "%s~3 %#5.1f  ~2util.,~3 %#5.1f  ~2système,~3 %#5.1f  ~2courtoisie,~3 "
#~ "%#5.1f  ~2inactif,~3 %#5.1f  ~2attente E/S~3"

#~ msgid "your kernel does not support diskstat. (2.5.70 or above required)"
#~ msgstr "votre kernel ne supporte pas diskstat. (2.5.70 ou plus requis)"

#~ msgid "your kernel does not support diskstat (2.5.70 or above required)"
#~ msgstr "votre kernel ne supporte pas diskstat (2.5.70 ou plus requis)"

#~ msgid ""
#~ "your kernel does not support slabinfo or your permissions are insufficient"
#~ msgstr ""
#~ "votre kernel ne supporte pas slabinfo ou vos permissions sont "
#~ "insuffisantes"

#~ msgid ""
#~ " --ns <PID>                match the processes that belong to the same\n"
#~ "                           namespace as <pid> or 0 for all namespaces\n"
#~ msgstr ""
#~ " --ns <PID>                trouve les processus qui appartiennent au "
#~ "même\n"
#~ "                           espace de nom que <PID> ou 0 pour tous les "
#~ "espaces\n"
#~ "                           de noms\n"

#~ msgid "Overwrite existing obsolete/corrupted rcfile?"
#~ msgstr "Écraser le fichier rcfile existant qui est obsolète ou corrompu ?"

#~ msgid "reads  "
#~ msgstr "lectures"

#~ msgid "seconds argument `%s' failed"
#~ msgstr "l'argument des secondes « %s » n'est pas valable"

#~ msgid "alternate System.map file must follow -n"
#~ msgstr "le fichier System.map alternatif doit suivre -n"

#~ msgid "alternate System.map file must follow N"
#~ msgstr "le fichier System.map alternatif doit suivre N"

#~ msgid "Adj"
#~ msgstr "Adj"

#~ msgid "oom_adjustment (2^X)"
#~ msgstr "oom_adjustment (2^X)"

# Quel terme utiliser pour désigner la probabilité que le process soit éliminé par le OOM killer ?
#~ msgid "Badness"
#~ msgstr "OOM killer mediation"

#~ msgid "oom_score (badness)"
#~ msgstr "oom_score (badness)"

#~ msgid "%d column window is too narrow"
#~ msgstr "la fenêtre avec %d colonnes est trop étroite"

#~ msgid "%d column width exceeds command buffer size, truncating to %d"
#~ msgstr ""
#~ "la largeur de colonne %d dépasse la taille du tampon de commande, tronqué "
#~ "à %d"

#~ msgid "warning: screen width %d suboptimal"
#~ msgstr "attention: la largeur %d de l'écran n'est pas optimale"

#~ msgid ""
#~ " -o, --old           use old format (without -/+buffers/cache line)\n"
#~ msgstr ""
#~ " -o, --old           utiliser l'ancien format (sans la ligne -/+tampon/"
#~ "cache)\n"

#~ msgid "-/+ buffers/cache:"
#~ msgstr "-/+ tampons/cache:"

#~ msgid "Nothing to highlight!"
#~ msgstr "Rien à mettre en évidence !"

#~ msgid "could not parse rcfile inspect entry %d"
#~ msgstr "l'entrée inspect %d du fichier rcfile n'a pu être analysée"
