procps/proc/stat.h

159 lines
4.6 KiB
C
Raw Normal View History

/*
* libprocps - Library to read proc filesystem
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef PROCPS_STAT_H
#define PROCPS_STAT_H
library: removed all the 'PROCPS_' enumerator prefixes Many of our item enumerator identifiers are very long, especially in that <VMSTAT> module. Additionally, they all contain the exact same universal 'PROCPS_' prefix. The origins for this are likely found in the desire to avoid name clashes with other potential include files. But with procps-ng newlib, we've probably gone way too far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more protection against clash than 'PIDS_TICS_SYSTEM' does? I don't think so. Besides, no matter how big that name becomes, one can never guarantee they'll never be some clash. And, conversely, extremely short names will not always create conflict. Of course, in either case when some clash occurs, one can always #undef that problem. Thus, this commit will eliminate that 'PROCPS_' prefix making all of those enum identifiers a little shorter. And, we'll still be well above some ridiculously short (criminally short) names found in some common headers: - - - - - - - - - - <term.h> - 'tab', 'TTY', etc - - - - - - - - - - - - - - - - <search.h> - 'ENTER', ENTRY', 'FIND', etc ------------------------------------------------------ Finally, with this as a last of the wholesale changes, we will have established the naming conventions below: . only functions will begin with that 'procps_' prefix . exposed structures begin with the module/header name . item enumerators begin like structs, but capitalized . other enumerators work exactly like item enumerators . macros and constants begin just like the enumerators ------------------------------------------------------ Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
#include <sys/cdefs.h>
__BEGIN_DECLS
library: improve/standardize one interface, <STAT> api This commit represents a complete redesign of the stat interface. Gone are the confusing 8 separate accessors along with their 2 additional read functions. In their place we have just 3 accessors, with no read required. That old interface also suffered an inflexibility with respect to structures. Now we deal with an unchanging standard 'result' struct enabling future changes where the binary interface will no longer need to be broken. And gone is that former unnecessary typedef, used when dealing with jiffies. Now the standard C type is used. Our new API also adds some brand new functionality. If a caller plans to employ successive 'select' or 'reap' invocations, then delta values are available (which is actually only what that top program is interested in). At some future point a 'sort' function could be easily introduced to complement the 'reap' function. However, I saw no need for it at present and so it was omitted. There were several design decisions which everyone may not agree with. In support I'll offer these rationals: . The 'get' function returns a signed long long result which means a potential loss of some significance. But I felt the ability to distinguish actual errors (minus values) from true zero results were worth such a risk. . The DELTA item enumerators were also made signed and smaller than their parents. And they are intentionally grouped as last so as to emphasize those distinctions. . The SYS type items were excluded from the new 'reap' function. It would not make sense to duplicate them in each results stack. They're limited to 'get'/'select'. . By the same token, some items (DELTA, etc.) will not be allowed under that 'get' routine. That function was already open to significant internal overhead (through subsequent calls like in vmstat.c). That is why it has been limited via 1 second between reads of /proc/stat. Lastly, when we finally get around to documenting this interface there's a real potential toe stubber when it comes to the numa node portion. The libnuma.so doesn't really provide any means to retrieve the active nodes. Thus, any total reported by <stat> is just the highest node number plus one, as reported by the numa library. Any unused/inactive nodes are identified through these . PROCPS_STAT_TIC_ID shows as PROCPS_STAT_NODE_INVALID By the same token after the STAT_REAP_CPUS_ONLY 'reap' . PROCPS_STAT_TIC_NUMA_NODE = PROCPS_STAT_NODE_INVALID Reference(s): http://www.freelists.org/post/procps/newlib-stat-interface Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-06 10:30:00 +05:30
enum stat_item {
library: removed all the 'PROCPS_' enumerator prefixes Many of our item enumerator identifiers are very long, especially in that <VMSTAT> module. Additionally, they all contain the exact same universal 'PROCPS_' prefix. The origins for this are likely found in the desire to avoid name clashes with other potential include files. But with procps-ng newlib, we've probably gone way too far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more protection against clash than 'PIDS_TICS_SYSTEM' does? I don't think so. Besides, no matter how big that name becomes, one can never guarantee they'll never be some clash. And, conversely, extremely short names will not always create conflict. Of course, in either case when some clash occurs, one can always #undef that problem. Thus, this commit will eliminate that 'PROCPS_' prefix making all of those enum identifiers a little shorter. And, we'll still be well above some ridiculously short (criminally short) names found in some common headers: - - - - - - - - - - <term.h> - 'tab', 'TTY', etc - - - - - - - - - - - - - - - - <search.h> - 'ENTER', ENTRY', 'FIND', etc ------------------------------------------------------ Finally, with this as a last of the wholesale changes, we will have established the naming conventions below: . only functions will begin with that 'procps_' prefix . exposed structures begin with the module/header name . item enumerators begin like structs, but capitalized . other enumerators work exactly like item enumerators . macros and constants begin just like the enumerators ------------------------------------------------------ Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
STAT_noop, // ( never altered )
STAT_extra, // ( reset to zero )
STAT_TIC_ID, // s_int
STAT_TIC_NUMA_NODE, // s_int
STAT_TIC_NUM_CONTRIBUTORS, // s_int
library: removed all the 'PROCPS_' enumerator prefixes Many of our item enumerator identifiers are very long, especially in that <VMSTAT> module. Additionally, they all contain the exact same universal 'PROCPS_' prefix. The origins for this are likely found in the desire to avoid name clashes with other potential include files. But with procps-ng newlib, we've probably gone way too far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more protection against clash than 'PIDS_TICS_SYSTEM' does? I don't think so. Besides, no matter how big that name becomes, one can never guarantee they'll never be some clash. And, conversely, extremely short names will not always create conflict. Of course, in either case when some clash occurs, one can always #undef that problem. Thus, this commit will eliminate that 'PROCPS_' prefix making all of those enum identifiers a little shorter. And, we'll still be well above some ridiculously short (criminally short) names found in some common headers: - - - - - - - - - - <term.h> - 'tab', 'TTY', etc - - - - - - - - - - - - - - - - <search.h> - 'ENTER', ENTRY', 'FIND', etc ------------------------------------------------------ Finally, with this as a last of the wholesale changes, we will have established the naming conventions below: . only functions will begin with that 'procps_' prefix . exposed structures begin with the module/header name . item enumerators begin like structs, but capitalized . other enumerators work exactly like item enumerators . macros and constants begin just like the enumerators ------------------------------------------------------ Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
STAT_TIC_USER, // ull_int
STAT_TIC_NICE, // ull_int
STAT_TIC_SYSTEM, // ull_int
STAT_TIC_IDLE, // ull_int
STAT_TIC_IOWAIT, // ull_int
STAT_TIC_IRQ, // ull_int
STAT_TIC_SOFTIRQ, // ull_int
STAT_TIC_STOLEN, // ull_int
STAT_TIC_GUEST, // ull_int
STAT_TIC_GUEST_NICE, // ull_int
STAT_TIC_SUM_TOTAL, // ull_int
STAT_TIC_SUM_BUSY, // ull_int
STAT_TIC_SUM_IDLE, // ull_int
STAT_TIC_SUM_USER, // ull_int
STAT_TIC_SUM_SYSTEM, // ull_int
library: removed all the 'PROCPS_' enumerator prefixes Many of our item enumerator identifiers are very long, especially in that <VMSTAT> module. Additionally, they all contain the exact same universal 'PROCPS_' prefix. The origins for this are likely found in the desire to avoid name clashes with other potential include files. But with procps-ng newlib, we've probably gone way too far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more protection against clash than 'PIDS_TICS_SYSTEM' does? I don't think so. Besides, no matter how big that name becomes, one can never guarantee they'll never be some clash. And, conversely, extremely short names will not always create conflict. Of course, in either case when some clash occurs, one can always #undef that problem. Thus, this commit will eliminate that 'PROCPS_' prefix making all of those enum identifiers a little shorter. And, we'll still be well above some ridiculously short (criminally short) names found in some common headers: - - - - - - - - - - <term.h> - 'tab', 'TTY', etc - - - - - - - - - - - - - - - - <search.h> - 'ENTER', ENTRY', 'FIND', etc ------------------------------------------------------ Finally, with this as a last of the wholesale changes, we will have established the naming conventions below: . only functions will begin with that 'procps_' prefix . exposed structures begin with the module/header name . item enumerators begin like structs, but capitalized . other enumerators work exactly like item enumerators . macros and constants begin just like the enumerators ------------------------------------------------------ Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
STAT_TIC_DELTA_USER, // sl_int
STAT_TIC_DELTA_NICE, // sl_int
STAT_TIC_DELTA_SYSTEM, // sl_int
STAT_TIC_DELTA_IDLE, // sl_int
STAT_TIC_DELTA_IOWAIT, // sl_int
STAT_TIC_DELTA_IRQ, // sl_int
STAT_TIC_DELTA_SOFTIRQ, // sl_int
STAT_TIC_DELTA_STOLEN, // sl_int
STAT_TIC_DELTA_GUEST, // sl_int
STAT_TIC_DELTA_GUEST_NICE, // sl_int
STAT_TIC_DELTA_SUM_TOTAL, // sl_int
STAT_TIC_DELTA_SUM_BUSY, // sl_int
STAT_TIC_DELTA_SUM_IDLE, // sl_int
STAT_TIC_DELTA_SUM_USER, // sl_int
STAT_TIC_DELTA_SUM_SYSTEM, // sl_int
library: removed all the 'PROCPS_' enumerator prefixes Many of our item enumerator identifiers are very long, especially in that <VMSTAT> module. Additionally, they all contain the exact same universal 'PROCPS_' prefix. The origins for this are likely found in the desire to avoid name clashes with other potential include files. But with procps-ng newlib, we've probably gone way too far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more protection against clash than 'PIDS_TICS_SYSTEM' does? I don't think so. Besides, no matter how big that name becomes, one can never guarantee they'll never be some clash. And, conversely, extremely short names will not always create conflict. Of course, in either case when some clash occurs, one can always #undef that problem. Thus, this commit will eliminate that 'PROCPS_' prefix making all of those enum identifiers a little shorter. And, we'll still be well above some ridiculously short (criminally short) names found in some common headers: - - - - - - - - - - <term.h> - 'tab', 'TTY', etc - - - - - - - - - - - - - - - - <search.h> - 'ENTER', ENTRY', 'FIND', etc ------------------------------------------------------ Finally, with this as a last of the wholesale changes, we will have established the naming conventions below: . only functions will begin with that 'procps_' prefix . exposed structures begin with the module/header name . item enumerators begin like structs, but capitalized . other enumerators work exactly like item enumerators . macros and constants begin just like the enumerators ------------------------------------------------------ Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
STAT_SYS_CTX_SWITCHES, // ul_int
STAT_SYS_INTERRUPTS, // ul_int
STAT_SYS_PROC_BLOCKED, // ul_int
STAT_SYS_PROC_CREATED, // ul_int
STAT_SYS_PROC_RUNNING, // ul_int
STAT_SYS_TIME_OF_BOOT, // ul_int
STAT_SYS_DELTA_CTX_SWITCHES, // s_int
STAT_SYS_DELTA_INTERRUPTS, // s_int
STAT_SYS_DELTA_PROC_BLOCKED, // s_int
STAT_SYS_DELTA_PROC_CREATED, // s_int
STAT_SYS_DELTA_PROC_RUNNING // s_int
};
library: improve/standardize one interface, <STAT> api This commit represents a complete redesign of the stat interface. Gone are the confusing 8 separate accessors along with their 2 additional read functions. In their place we have just 3 accessors, with no read required. That old interface also suffered an inflexibility with respect to structures. Now we deal with an unchanging standard 'result' struct enabling future changes where the binary interface will no longer need to be broken. And gone is that former unnecessary typedef, used when dealing with jiffies. Now the standard C type is used. Our new API also adds some brand new functionality. If a caller plans to employ successive 'select' or 'reap' invocations, then delta values are available (which is actually only what that top program is interested in). At some future point a 'sort' function could be easily introduced to complement the 'reap' function. However, I saw no need for it at present and so it was omitted. There were several design decisions which everyone may not agree with. In support I'll offer these rationals: . The 'get' function returns a signed long long result which means a potential loss of some significance. But I felt the ability to distinguish actual errors (minus values) from true zero results were worth such a risk. . The DELTA item enumerators were also made signed and smaller than their parents. And they are intentionally grouped as last so as to emphasize those distinctions. . The SYS type items were excluded from the new 'reap' function. It would not make sense to duplicate them in each results stack. They're limited to 'get'/'select'. . By the same token, some items (DELTA, etc.) will not be allowed under that 'get' routine. That function was already open to significant internal overhead (through subsequent calls like in vmstat.c). That is why it has been limited via 1 second between reads of /proc/stat. Lastly, when we finally get around to documenting this interface there's a real potential toe stubber when it comes to the numa node portion. The libnuma.so doesn't really provide any means to retrieve the active nodes. Thus, any total reported by <stat> is just the highest node number plus one, as reported by the numa library. Any unused/inactive nodes are identified through these . PROCPS_STAT_TIC_ID shows as PROCPS_STAT_NODE_INVALID By the same token after the STAT_REAP_CPUS_ONLY 'reap' . PROCPS_STAT_TIC_NUMA_NODE = PROCPS_STAT_NODE_INVALID Reference(s): http://www.freelists.org/post/procps/newlib-stat-interface Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-06 10:30:00 +05:30
enum stat_reap_type {
STAT_REAP_CPUS_ONLY,
STAT_REAP_CPUS_AND_NODES
};
enum stat_sort_order {
STAT_SORT_ASCEND = +1,
STAT_SORT_DESCEND = -1
};
library: readstat redesigned using 'stack' vs. 'chain' In addition to that text shown below the line which is common to several commit messages, this patch contains several minor changes with lessor impact upon the API: . A call to procps_stat_read_jiffs() has been added to those jiffs functions carrying the 'fill' nomenclature to parallel like functions in some of our other files. . The #include header files are ordered alphabetically now, with all those <sys/??> types separately grouped. . Standard copyright boilerplate was added in .c file. . The header file follows the conventions of indenting (by 4 spaces) those parameters too lengthy for 1 line. ------------------------------------------------------ . The former 'chains' have now become 'stacks' without the 'next' pointer in each result struct. The pointers initially seemed to offer some flexibility with memory allocations and benefits for the library access logic. However, user access was always via displacement and a a statically allocated chain was cumbersome to define. . An enumerator ending in '_noop' will no longer serve as a fencepost delimiter. Rather, it has become a much more important and flexible user oriented tool. Adding one or more such 'items' in any items list passed into the library becomes the means of extending the 'stack' to also include user (not just library) data. Any such data is guaranteed to never be altered by the library. . Anticipating PID support, where many different types must be represented in a result structure, we'll adopt a common naming standard. And, while not every results structure currently needs to reflect disparate types a union will be employed so the same dot qualifier ('.') can be used consistently when accessing all such data. Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-21 10:30:00 +05:30
struct stat_result {
library: improve/standardize one interface, <STAT> api This commit represents a complete redesign of the stat interface. Gone are the confusing 8 separate accessors along with their 2 additional read functions. In their place we have just 3 accessors, with no read required. That old interface also suffered an inflexibility with respect to structures. Now we deal with an unchanging standard 'result' struct enabling future changes where the binary interface will no longer need to be broken. And gone is that former unnecessary typedef, used when dealing with jiffies. Now the standard C type is used. Our new API also adds some brand new functionality. If a caller plans to employ successive 'select' or 'reap' invocations, then delta values are available (which is actually only what that top program is interested in). At some future point a 'sort' function could be easily introduced to complement the 'reap' function. However, I saw no need for it at present and so it was omitted. There were several design decisions which everyone may not agree with. In support I'll offer these rationals: . The 'get' function returns a signed long long result which means a potential loss of some significance. But I felt the ability to distinguish actual errors (minus values) from true zero results were worth such a risk. . The DELTA item enumerators were also made signed and smaller than their parents. And they are intentionally grouped as last so as to emphasize those distinctions. . The SYS type items were excluded from the new 'reap' function. It would not make sense to duplicate them in each results stack. They're limited to 'get'/'select'. . By the same token, some items (DELTA, etc.) will not be allowed under that 'get' routine. That function was already open to significant internal overhead (through subsequent calls like in vmstat.c). That is why it has been limited via 1 second between reads of /proc/stat. Lastly, when we finally get around to documenting this interface there's a real potential toe stubber when it comes to the numa node portion. The libnuma.so doesn't really provide any means to retrieve the active nodes. Thus, any total reported by <stat> is just the highest node number plus one, as reported by the numa library. Any unused/inactive nodes are identified through these . PROCPS_STAT_TIC_ID shows as PROCPS_STAT_NODE_INVALID By the same token after the STAT_REAP_CPUS_ONLY 'reap' . PROCPS_STAT_TIC_NUMA_NODE = PROCPS_STAT_NODE_INVALID Reference(s): http://www.freelists.org/post/procps/newlib-stat-interface Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-06 10:30:00 +05:30
enum stat_item item;
library: readstat redesigned using 'stack' vs. 'chain' In addition to that text shown below the line which is common to several commit messages, this patch contains several minor changes with lessor impact upon the API: . A call to procps_stat_read_jiffs() has been added to those jiffs functions carrying the 'fill' nomenclature to parallel like functions in some of our other files. . The #include header files are ordered alphabetically now, with all those <sys/??> types separately grouped. . Standard copyright boilerplate was added in .c file. . The header file follows the conventions of indenting (by 4 spaces) those parameters too lengthy for 1 line. ------------------------------------------------------ . The former 'chains' have now become 'stacks' without the 'next' pointer in each result struct. The pointers initially seemed to offer some flexibility with memory allocations and benefits for the library access logic. However, user access was always via displacement and a a statically allocated chain was cumbersome to define. . An enumerator ending in '_noop' will no longer serve as a fencepost delimiter. Rather, it has become a much more important and flexible user oriented tool. Adding one or more such 'items' in any items list passed into the library becomes the means of extending the 'stack' to also include user (not just library) data. Any such data is guaranteed to never be altered by the library. . Anticipating PID support, where many different types must be represented in a result structure, we'll adopt a common naming standard. And, while not every results structure currently needs to reflect disparate types a union will be employed so the same dot qualifier ('.') can be used consistently when accessing all such data. Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-21 10:30:00 +05:30
union {
library: more tweaks for code and/or comments, 3rd gen Following is a summary of significant changes (if any) to each of these now upgraded 3rd gen library modules. <meminfo> ............................................ . eliminated duplicate decl of 'struct procps_meminfo' . standardized/normalized results struct union members . added 'std' & 'var' dividers in .c file, like <pids> . how did i miss relocating all these friggin' #undefs . cleanup 'get' return logic (remove a redundant 'if') <pids> ............................................... . repositioned the procps_pidsinfo structure in header . removed the extra trailing comma from enum pids_item . standardized/normalized results struct union members <slabinfo> ........................................... . corrected comment typo (jeeze, in an 'aligned' para) . standardized/normalized results struct union members . added 'std' & 'var' dividers in .c file, like <pids> . removed an obsolete #undef from procps_slabinfo_sort . cleanup 'get' return logic (remove a redundant 'if') <stat> ............................................... . how did i miss relocating all these friggin' #undefs . corrected an initialization fencepost used with numa <=== see Craig, here's a bug fix . removed the extra trailing comma from enum stat_item . standardized/normalized results struct union members . added 'std' & 'var' dividers in .c file, like <pids> . strengthen those parm checks in procps_stat_get func . cleanup 'get' return logic (remove a redundant 'if') <vmstat> ............................................. . standardized/normalized results struct union members . added 'std' & 'var' dividers in .c file, like <pids> . cleanup 'get' return logic (remove a redundant 'if') [ virtually all of these tweaks reflect the author's ] [ continuing pursuit of an unreasonable goal -- that ] [ of a 'perfect' (plus 'pretty') C language program! ] Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-06-14 10:30:00 +05:30
signed int s_int;
signed long sl_int;
unsigned long ul_int;
unsigned long long ull_int;
library: readstat redesigned using 'stack' vs. 'chain' In addition to that text shown below the line which is common to several commit messages, this patch contains several minor changes with lessor impact upon the API: . A call to procps_stat_read_jiffs() has been added to those jiffs functions carrying the 'fill' nomenclature to parallel like functions in some of our other files. . The #include header files are ordered alphabetically now, with all those <sys/??> types separately grouped. . Standard copyright boilerplate was added in .c file. . The header file follows the conventions of indenting (by 4 spaces) those parameters too lengthy for 1 line. ------------------------------------------------------ . The former 'chains' have now become 'stacks' without the 'next' pointer in each result struct. The pointers initially seemed to offer some flexibility with memory allocations and benefits for the library access logic. However, user access was always via displacement and a a statically allocated chain was cumbersome to define. . An enumerator ending in '_noop' will no longer serve as a fencepost delimiter. Rather, it has become a much more important and flexible user oriented tool. Adding one or more such 'items' in any items list passed into the library becomes the means of extending the 'stack' to also include user (not just library) data. Any such data is guaranteed to never be altered by the library. . Anticipating PID support, where many different types must be represented in a result structure, we'll adopt a common naming standard. And, while not every results structure currently needs to reflect disparate types a union will be employed so the same dot qualifier ('.') can be used consistently when accessing all such data. Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-21 10:30:00 +05:30
} result;
};
library: improve/standardize one interface, <STAT> api This commit represents a complete redesign of the stat interface. Gone are the confusing 8 separate accessors along with their 2 additional read functions. In their place we have just 3 accessors, with no read required. That old interface also suffered an inflexibility with respect to structures. Now we deal with an unchanging standard 'result' struct enabling future changes where the binary interface will no longer need to be broken. And gone is that former unnecessary typedef, used when dealing with jiffies. Now the standard C type is used. Our new API also adds some brand new functionality. If a caller plans to employ successive 'select' or 'reap' invocations, then delta values are available (which is actually only what that top program is interested in). At some future point a 'sort' function could be easily introduced to complement the 'reap' function. However, I saw no need for it at present and so it was omitted. There were several design decisions which everyone may not agree with. In support I'll offer these rationals: . The 'get' function returns a signed long long result which means a potential loss of some significance. But I felt the ability to distinguish actual errors (minus values) from true zero results were worth such a risk. . The DELTA item enumerators were also made signed and smaller than their parents. And they are intentionally grouped as last so as to emphasize those distinctions. . The SYS type items were excluded from the new 'reap' function. It would not make sense to duplicate them in each results stack. They're limited to 'get'/'select'. . By the same token, some items (DELTA, etc.) will not be allowed under that 'get' routine. That function was already open to significant internal overhead (through subsequent calls like in vmstat.c). That is why it has been limited via 1 second between reads of /proc/stat. Lastly, when we finally get around to documenting this interface there's a real potential toe stubber when it comes to the numa node portion. The libnuma.so doesn't really provide any means to retrieve the active nodes. Thus, any total reported by <stat> is just the highest node number plus one, as reported by the numa library. Any unused/inactive nodes are identified through these . PROCPS_STAT_TIC_ID shows as PROCPS_STAT_NODE_INVALID By the same token after the STAT_REAP_CPUS_ONLY 'reap' . PROCPS_STAT_TIC_NUMA_NODE = PROCPS_STAT_NODE_INVALID Reference(s): http://www.freelists.org/post/procps/newlib-stat-interface Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-06 10:30:00 +05:30
struct stat_stack {
struct stat_result *head;
};
library: improve/standardize one interface, <STAT> api This commit represents a complete redesign of the stat interface. Gone are the confusing 8 separate accessors along with their 2 additional read functions. In their place we have just 3 accessors, with no read required. That old interface also suffered an inflexibility with respect to structures. Now we deal with an unchanging standard 'result' struct enabling future changes where the binary interface will no longer need to be broken. And gone is that former unnecessary typedef, used when dealing with jiffies. Now the standard C type is used. Our new API also adds some brand new functionality. If a caller plans to employ successive 'select' or 'reap' invocations, then delta values are available (which is actually only what that top program is interested in). At some future point a 'sort' function could be easily introduced to complement the 'reap' function. However, I saw no need for it at present and so it was omitted. There were several design decisions which everyone may not agree with. In support I'll offer these rationals: . The 'get' function returns a signed long long result which means a potential loss of some significance. But I felt the ability to distinguish actual errors (minus values) from true zero results were worth such a risk. . The DELTA item enumerators were also made signed and smaller than their parents. And they are intentionally grouped as last so as to emphasize those distinctions. . The SYS type items were excluded from the new 'reap' function. It would not make sense to duplicate them in each results stack. They're limited to 'get'/'select'. . By the same token, some items (DELTA, etc.) will not be allowed under that 'get' routine. That function was already open to significant internal overhead (through subsequent calls like in vmstat.c). That is why it has been limited via 1 second between reads of /proc/stat. Lastly, when we finally get around to documenting this interface there's a real potential toe stubber when it comes to the numa node portion. The libnuma.so doesn't really provide any means to retrieve the active nodes. Thus, any total reported by <stat> is just the highest node number plus one, as reported by the numa library. Any unused/inactive nodes are identified through these . PROCPS_STAT_TIC_ID shows as PROCPS_STAT_NODE_INVALID By the same token after the STAT_REAP_CPUS_ONLY 'reap' . PROCPS_STAT_TIC_NUMA_NODE = PROCPS_STAT_NODE_INVALID Reference(s): http://www.freelists.org/post/procps/newlib-stat-interface Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-06 10:30:00 +05:30
struct stat_reap {
int total;
struct stat_stack **stacks;
};
library: improve/standardize one interface, <STAT> api This commit represents a complete redesign of the stat interface. Gone are the confusing 8 separate accessors along with their 2 additional read functions. In their place we have just 3 accessors, with no read required. That old interface also suffered an inflexibility with respect to structures. Now we deal with an unchanging standard 'result' struct enabling future changes where the binary interface will no longer need to be broken. And gone is that former unnecessary typedef, used when dealing with jiffies. Now the standard C type is used. Our new API also adds some brand new functionality. If a caller plans to employ successive 'select' or 'reap' invocations, then delta values are available (which is actually only what that top program is interested in). At some future point a 'sort' function could be easily introduced to complement the 'reap' function. However, I saw no need for it at present and so it was omitted. There were several design decisions which everyone may not agree with. In support I'll offer these rationals: . The 'get' function returns a signed long long result which means a potential loss of some significance. But I felt the ability to distinguish actual errors (minus values) from true zero results were worth such a risk. . The DELTA item enumerators were also made signed and smaller than their parents. And they are intentionally grouped as last so as to emphasize those distinctions. . The SYS type items were excluded from the new 'reap' function. It would not make sense to duplicate them in each results stack. They're limited to 'get'/'select'. . By the same token, some items (DELTA, etc.) will not be allowed under that 'get' routine. That function was already open to significant internal overhead (through subsequent calls like in vmstat.c). That is why it has been limited via 1 second between reads of /proc/stat. Lastly, when we finally get around to documenting this interface there's a real potential toe stubber when it comes to the numa node portion. The libnuma.so doesn't really provide any means to retrieve the active nodes. Thus, any total reported by <stat> is just the highest node number plus one, as reported by the numa library. Any unused/inactive nodes are identified through these . PROCPS_STAT_TIC_ID shows as PROCPS_STAT_NODE_INVALID By the same token after the STAT_REAP_CPUS_ONLY 'reap' . PROCPS_STAT_TIC_NUMA_NODE = PROCPS_STAT_NODE_INVALID Reference(s): http://www.freelists.org/post/procps/newlib-stat-interface Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-06 10:30:00 +05:30
struct stat_reaped {
struct stat_stack *summary;
struct stat_reap *cpus;
struct stat_reap *nodes;
};
library: readstat redesigned using 'stack' vs. 'chain' In addition to that text shown below the line which is common to several commit messages, this patch contains several minor changes with lessor impact upon the API: . A call to procps_stat_read_jiffs() has been added to those jiffs functions carrying the 'fill' nomenclature to parallel like functions in some of our other files. . The #include header files are ordered alphabetically now, with all those <sys/??> types separately grouped. . Standard copyright boilerplate was added in .c file. . The header file follows the conventions of indenting (by 4 spaces) those parameters too lengthy for 1 line. ------------------------------------------------------ . The former 'chains' have now become 'stacks' without the 'next' pointer in each result struct. The pointers initially seemed to offer some flexibility with memory allocations and benefits for the library access logic. However, user access was always via displacement and a a statically allocated chain was cumbersome to define. . An enumerator ending in '_noop' will no longer serve as a fencepost delimiter. Rather, it has become a much more important and flexible user oriented tool. Adding one or more such 'items' in any items list passed into the library becomes the means of extending the 'stack' to also include user (not just library) data. Any such data is guaranteed to never be altered by the library. . Anticipating PID support, where many different types must be represented in a result structure, we'll adopt a common naming standard. And, while not every results structure currently needs to reflect disparate types a union will be employed so the same dot qualifier ('.') can be used consistently when accessing all such data. Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-21 10:30:00 +05:30
library: removed all the 'PROCPS_' enumerator prefixes Many of our item enumerator identifiers are very long, especially in that <VMSTAT> module. Additionally, they all contain the exact same universal 'PROCPS_' prefix. The origins for this are likely found in the desire to avoid name clashes with other potential include files. But with procps-ng newlib, we've probably gone way too far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more protection against clash than 'PIDS_TICS_SYSTEM' does? I don't think so. Besides, no matter how big that name becomes, one can never guarantee they'll never be some clash. And, conversely, extremely short names will not always create conflict. Of course, in either case when some clash occurs, one can always #undef that problem. Thus, this commit will eliminate that 'PROCPS_' prefix making all of those enum identifiers a little shorter. And, we'll still be well above some ridiculously short (criminally short) names found in some common headers: - - - - - - - - - - <term.h> - 'tab', 'TTY', etc - - - - - - - - - - - - - - - - <search.h> - 'ENTER', ENTRY', 'FIND', etc ------------------------------------------------------ Finally, with this as a last of the wholesale changes, we will have established the naming conventions below: . only functions will begin with that 'procps_' prefix . exposed structures begin with the module/header name . item enumerators begin like structs, but capitalized . other enumerators work exactly like item enumerators . macros and constants begin just like the enumerators ------------------------------------------------------ Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
#define STAT_SUMMARY_ID -11111
#define STAT_NODE_INVALID -22222
library: readstat redesigned using 'stack' vs. 'chain' In addition to that text shown below the line which is common to several commit messages, this patch contains several minor changes with lessor impact upon the API: . A call to procps_stat_read_jiffs() has been added to those jiffs functions carrying the 'fill' nomenclature to parallel like functions in some of our other files. . The #include header files are ordered alphabetically now, with all those <sys/??> types separately grouped. . Standard copyright boilerplate was added in .c file. . The header file follows the conventions of indenting (by 4 spaces) those parameters too lengthy for 1 line. ------------------------------------------------------ . The former 'chains' have now become 'stacks' without the 'next' pointer in each result struct. The pointers initially seemed to offer some flexibility with memory allocations and benefits for the library access logic. However, user access was always via displacement and a a statically allocated chain was cumbersome to define. . An enumerator ending in '_noop' will no longer serve as a fencepost delimiter. Rather, it has become a much more important and flexible user oriented tool. Adding one or more such 'items' in any items list passed into the library becomes the means of extending the 'stack' to also include user (not just library) data. Any such data is guaranteed to never be altered by the library. . Anticipating PID support, where many different types must be represented in a result structure, we'll adopt a common naming standard. And, while not every results structure currently needs to reflect disparate types a union will be employed so the same dot qualifier ('.') can be used consistently when accessing all such data. Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-21 10:30:00 +05:30
#define STAT_GET( info, actual_enum, type ) ( { \
struct stat_result *r = procps_stat_get( info, actual_enum ); \
r ? r->result . type : 0; } )
#define STAT_VAL( relative_enum, type, stack, info ) \
stack -> head [ relative_enum ] . result . type
library: readstat redesigned using 'stack' vs. 'chain' In addition to that text shown below the line which is common to several commit messages, this patch contains several minor changes with lessor impact upon the API: . A call to procps_stat_read_jiffs() has been added to those jiffs functions carrying the 'fill' nomenclature to parallel like functions in some of our other files. . The #include header files are ordered alphabetically now, with all those <sys/??> types separately grouped. . Standard copyright boilerplate was added in .c file. . The header file follows the conventions of indenting (by 4 spaces) those parameters too lengthy for 1 line. ------------------------------------------------------ . The former 'chains' have now become 'stacks' without the 'next' pointer in each result struct. The pointers initially seemed to offer some flexibility with memory allocations and benefits for the library access logic. However, user access was always via displacement and a a statically allocated chain was cumbersome to define. . An enumerator ending in '_noop' will no longer serve as a fencepost delimiter. Rather, it has become a much more important and flexible user oriented tool. Adding one or more such 'items' in any items list passed into the library becomes the means of extending the 'stack' to also include user (not just library) data. Any such data is guaranteed to never be altered by the library. . Anticipating PID support, where many different types must be represented in a result structure, we'll adopt a common naming standard. And, while not every results structure currently needs to reflect disparate types a union will be employed so the same dot qualifier ('.') can be used consistently when accessing all such data. Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-21 10:30:00 +05:30
struct stat_info;
library: readstat redesigned using 'stack' vs. 'chain' In addition to that text shown below the line which is common to several commit messages, this patch contains several minor changes with lessor impact upon the API: . A call to procps_stat_read_jiffs() has been added to those jiffs functions carrying the 'fill' nomenclature to parallel like functions in some of our other files. . The #include header files are ordered alphabetically now, with all those <sys/??> types separately grouped. . Standard copyright boilerplate was added in .c file. . The header file follows the conventions of indenting (by 4 spaces) those parameters too lengthy for 1 line. ------------------------------------------------------ . The former 'chains' have now become 'stacks' without the 'next' pointer in each result struct. The pointers initially seemed to offer some flexibility with memory allocations and benefits for the library access logic. However, user access was always via displacement and a a statically allocated chain was cumbersome to define. . An enumerator ending in '_noop' will no longer serve as a fencepost delimiter. Rather, it has become a much more important and flexible user oriented tool. Adding one or more such 'items' in any items list passed into the library becomes the means of extending the 'stack' to also include user (not just library) data. Any such data is guaranteed to never be altered by the library. . Anticipating PID support, where many different types must be represented in a result structure, we'll adopt a common naming standard. And, while not every results structure currently needs to reflect disparate types a union will be employed so the same dot qualifier ('.') can be used consistently when accessing all such data. Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-21 10:30:00 +05:30
int procps_stat_new (struct stat_info **info);
int procps_stat_ref (struct stat_info *info);
int procps_stat_unref (struct stat_info **info);
library: readstat redesigned using 'stack' vs. 'chain' In addition to that text shown below the line which is common to several commit messages, this patch contains several minor changes with lessor impact upon the API: . A call to procps_stat_read_jiffs() has been added to those jiffs functions carrying the 'fill' nomenclature to parallel like functions in some of our other files. . The #include header files are ordered alphabetically now, with all those <sys/??> types separately grouped. . Standard copyright boilerplate was added in .c file. . The header file follows the conventions of indenting (by 4 spaces) those parameters too lengthy for 1 line. ------------------------------------------------------ . The former 'chains' have now become 'stacks' without the 'next' pointer in each result struct. The pointers initially seemed to offer some flexibility with memory allocations and benefits for the library access logic. However, user access was always via displacement and a a statically allocated chain was cumbersome to define. . An enumerator ending in '_noop' will no longer serve as a fencepost delimiter. Rather, it has become a much more important and flexible user oriented tool. Adding one or more such 'items' in any items list passed into the library becomes the means of extending the 'stack' to also include user (not just library) data. Any such data is guaranteed to never be altered by the library. . Anticipating PID support, where many different types must be represented in a result structure, we'll adopt a common naming standard. And, while not every results structure currently needs to reflect disparate types a union will be employed so the same dot qualifier ('.') can be used consistently when accessing all such data. Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-21 10:30:00 +05:30
struct stat_result *procps_stat_get (
struct stat_info *info,
library: improve/standardize one interface, <STAT> api This commit represents a complete redesign of the stat interface. Gone are the confusing 8 separate accessors along with their 2 additional read functions. In their place we have just 3 accessors, with no read required. That old interface also suffered an inflexibility with respect to structures. Now we deal with an unchanging standard 'result' struct enabling future changes where the binary interface will no longer need to be broken. And gone is that former unnecessary typedef, used when dealing with jiffies. Now the standard C type is used. Our new API also adds some brand new functionality. If a caller plans to employ successive 'select' or 'reap' invocations, then delta values are available (which is actually only what that top program is interested in). At some future point a 'sort' function could be easily introduced to complement the 'reap' function. However, I saw no need for it at present and so it was omitted. There were several design decisions which everyone may not agree with. In support I'll offer these rationals: . The 'get' function returns a signed long long result which means a potential loss of some significance. But I felt the ability to distinguish actual errors (minus values) from true zero results were worth such a risk. . The DELTA item enumerators were also made signed and smaller than their parents. And they are intentionally grouped as last so as to emphasize those distinctions. . The SYS type items were excluded from the new 'reap' function. It would not make sense to duplicate them in each results stack. They're limited to 'get'/'select'. . By the same token, some items (DELTA, etc.) will not be allowed under that 'get' routine. That function was already open to significant internal overhead (through subsequent calls like in vmstat.c). That is why it has been limited via 1 second between reads of /proc/stat. Lastly, when we finally get around to documenting this interface there's a real potential toe stubber when it comes to the numa node portion. The libnuma.so doesn't really provide any means to retrieve the active nodes. Thus, any total reported by <stat> is just the highest node number plus one, as reported by the numa library. Any unused/inactive nodes are identified through these . PROCPS_STAT_TIC_ID shows as PROCPS_STAT_NODE_INVALID By the same token after the STAT_REAP_CPUS_ONLY 'reap' . PROCPS_STAT_TIC_NUMA_NODE = PROCPS_STAT_NODE_INVALID Reference(s): http://www.freelists.org/post/procps/newlib-stat-interface Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-06 10:30:00 +05:30
enum stat_item item);
struct stat_reaped *procps_stat_reap (
struct stat_info *info,
enum stat_reap_type what,
library: improve/standardize one interface, <STAT> api This commit represents a complete redesign of the stat interface. Gone are the confusing 8 separate accessors along with their 2 additional read functions. In their place we have just 3 accessors, with no read required. That old interface also suffered an inflexibility with respect to structures. Now we deal with an unchanging standard 'result' struct enabling future changes where the binary interface will no longer need to be broken. And gone is that former unnecessary typedef, used when dealing with jiffies. Now the standard C type is used. Our new API also adds some brand new functionality. If a caller plans to employ successive 'select' or 'reap' invocations, then delta values are available (which is actually only what that top program is interested in). At some future point a 'sort' function could be easily introduced to complement the 'reap' function. However, I saw no need for it at present and so it was omitted. There were several design decisions which everyone may not agree with. In support I'll offer these rationals: . The 'get' function returns a signed long long result which means a potential loss of some significance. But I felt the ability to distinguish actual errors (minus values) from true zero results were worth such a risk. . The DELTA item enumerators were also made signed and smaller than their parents. And they are intentionally grouped as last so as to emphasize those distinctions. . The SYS type items were excluded from the new 'reap' function. It would not make sense to duplicate them in each results stack. They're limited to 'get'/'select'. . By the same token, some items (DELTA, etc.) will not be allowed under that 'get' routine. That function was already open to significant internal overhead (through subsequent calls like in vmstat.c). That is why it has been limited via 1 second between reads of /proc/stat. Lastly, when we finally get around to documenting this interface there's a real potential toe stubber when it comes to the numa node portion. The libnuma.so doesn't really provide any means to retrieve the active nodes. Thus, any total reported by <stat> is just the highest node number plus one, as reported by the numa library. Any unused/inactive nodes are identified through these . PROCPS_STAT_TIC_ID shows as PROCPS_STAT_NODE_INVALID By the same token after the STAT_REAP_CPUS_ONLY 'reap' . PROCPS_STAT_TIC_NUMA_NODE = PROCPS_STAT_NODE_INVALID Reference(s): http://www.freelists.org/post/procps/newlib-stat-interface Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-06 10:30:00 +05:30
enum stat_item *items,
int numitems);
struct stat_stack *procps_stat_select (
struct stat_info *info,
library: improve/standardize one interface, <STAT> api This commit represents a complete redesign of the stat interface. Gone are the confusing 8 separate accessors along with their 2 additional read functions. In their place we have just 3 accessors, with no read required. That old interface also suffered an inflexibility with respect to structures. Now we deal with an unchanging standard 'result' struct enabling future changes where the binary interface will no longer need to be broken. And gone is that former unnecessary typedef, used when dealing with jiffies. Now the standard C type is used. Our new API also adds some brand new functionality. If a caller plans to employ successive 'select' or 'reap' invocations, then delta values are available (which is actually only what that top program is interested in). At some future point a 'sort' function could be easily introduced to complement the 'reap' function. However, I saw no need for it at present and so it was omitted. There were several design decisions which everyone may not agree with. In support I'll offer these rationals: . The 'get' function returns a signed long long result which means a potential loss of some significance. But I felt the ability to distinguish actual errors (minus values) from true zero results were worth such a risk. . The DELTA item enumerators were also made signed and smaller than their parents. And they are intentionally grouped as last so as to emphasize those distinctions. . The SYS type items were excluded from the new 'reap' function. It would not make sense to duplicate them in each results stack. They're limited to 'get'/'select'. . By the same token, some items (DELTA, etc.) will not be allowed under that 'get' routine. That function was already open to significant internal overhead (through subsequent calls like in vmstat.c). That is why it has been limited via 1 second between reads of /proc/stat. Lastly, when we finally get around to documenting this interface there's a real potential toe stubber when it comes to the numa node portion. The libnuma.so doesn't really provide any means to retrieve the active nodes. Thus, any total reported by <stat> is just the highest node number plus one, as reported by the numa library. Any unused/inactive nodes are identified through these . PROCPS_STAT_TIC_ID shows as PROCPS_STAT_NODE_INVALID By the same token after the STAT_REAP_CPUS_ONLY 'reap' . PROCPS_STAT_TIC_NUMA_NODE = PROCPS_STAT_NODE_INVALID Reference(s): http://www.freelists.org/post/procps/newlib-stat-interface Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-06 10:30:00 +05:30
enum stat_item *items,
int numitems);
struct stat_stack **procps_stat_sort (
struct stat_info *info,
struct stat_stack *stacks[],
int numstacked,
enum stat_item sortitem,
enum stat_sort_order order);
__END_DECLS
#endif