The Debian bug referenced below has nothing to do with
locales. In fact, top was made locale independent back
in release 3.3.13 (April, 2018). However, that bug did
reveal some misplaced logic which this patch corrects.
Prompted by the Qualys audit, all rcfile field strings
were checked for potential duplicates which could only
have resulted from some user's manual/malicious edits.
Unfortunately, that code was executed before top had a
chance to enforce the proper/maximum string length (in
the event an extremely old rcfile had just been read).
This created some potential string overrun references.
In top's original 3.3.15 implementation, the potential
overrun extended for 15 characters. That is the number
of field characters added with 3.3.9 (December, 2013).
But, since strchr() was used, no error exit was taken.
In the revised 3.3.16 implementation, the strchr() was
replaced with '&w->rc.fieldscur[n]'. This held overrun
to a single position while producing an error message.
So, this commit just moves that logic to a point where
fieldscur is guaranteed to be longer than EU_MAXPFLGS.
Reference(s):
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=951335
. revised 3.3.16 validation logic
commit 291d98ee50
. original 3.3.15 validation logic
commit fdb58974e2
Signed-off-by: Jim Warner <james.warner@comcast.net>
When that potential abend at program end was addressed
in the patch shown below, one line of code was removed
in error. That line served to suppress some end-of-job
reports should ATEOJ_RPTSTD or ATEOJ_RPTHSH be active.
So, this patch restores that previously deleted logic.
Reference(s):
. potential SEGV fix, master branch
commit d37f85c269
Signed-off-by: Jim Warner <james.warner@comcast.net>
A Qualys audit patch, represented in the commit below,
added the _exit() call to our abnormal signal handler.
Unfortunately, that disabled the associated core dump.
This patch restores expected behavior of those signals
whose default produces a core dump file + termination.
Reference(s):
commit 2e4a594221
Signed-off-by: Jim Warner <james.warner@comcast.net>
A Qualys audit patch, represented in the commit below,
added the _exit() call to our abnormal signal handler.
Unfortunately, that disabled the associated core dump.
This patch restores expected behavior of those signals
whose default produces a core dump file + termination.
Reference(s):
commit 0847390b83
Signed-off-by: Jim Warner <james.warner@comcast.net>
In a translator hint, under a caution, a reference was
made to the "next three items". Unfortunately however,
there was one intervening 'item' to which that caution
did not apply. This commit just relocates that 'item'.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit duplicates a change to that newlib branch.
However, it should be noted that such a change was not
really necessary under this master branch since proc_t
data remains valid much longer. It is being duplicated
here as documentation only. Below is the original msg.
------------------------------------------------------
This patch will eliminate a bug which is unique to our
newlib branch. It's extremely rare and only happens if
a search ('L'/'&') is initiated during the period when
fields are currently being auto-sized (AUTOX_MODE on).
This bug surfaces as either all zero results for tasks
displayed or a segmentation fault, depending upon what
fields were activated. It is caused by the timing of a
call to the <pids> 'reset' function. When called after
a task refresh, but before do_key(), this bug appears.
So this patch just ensures that 'reset' will be called
after do_key() & before the tasks have been refreshed.
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
Previous release incremented the age instead of incrementing the
revision. The age can only increment if revision (internal changes
only) or current (API changes) also increments.
A C:R:A of 8.0.2 means its the latest revision of 8.0 library and
any binary linked against 8.0 will work. This is our third revision
of the 8.0 library.
References:
https://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
The install target was using the wrong directory and would throw
some errors where a language couldn't translate man pages. This
one should be hopefully more robust.
Downloaded the updated translations of the binaries and the manpages
from translation project. Then fixed the typos that caused po4a to
fail, mainly errant spaces.
Using the newer po4a tool for manpage translations. Also removing
the manpage po file update from dist target because it should be
something the is explicitly done.
The git repository will hold the original man pages and the
po translation files. The distribution tarball will hold those
and the translated manpages. This means most people won't need po4a
as the distribution fill will have these translated manpages.
The previous Makefile rule would only put the first required file
into the pot file because it used $< Unfortunately, due to how
po4a tools work, its not just a simple matter of changing it to $^
and you're done, but needs a foreach loop to add -m to each manpage
file.
This is a temporary fix, after some more work looking into po4a the
unified tool (called po4a) will be used.
Beyond the copyrights, the single oops in the man page
was introduced in the commit which is referenced below
dealing with some cleanup following that Qualys audit.
Reference(s):
. man page error introduced
commit e531c78140
Signed-off-by: Jim Warner <james.warner@comcast.net>
@MarsChan correctly pointed out that the read() always returns 128
bytes, so skipping on >= 128 will always mean we skip. Their suggestion
was to remove the equality, but read will never go past 128 bytes so
I just removed that part of the check.
References:
procps-ng/procps!89
Short separator option used 's' instead of 'S' which
meant it pidof would use the single-shot option when you
meant separator.
Added alias for -S using -d to give some sysvinit pidof
compatibility.
References:
commit 73492b182dprocps-ng/procps#141
watch used to check if COLOR was required, check if color was
possible then.. set the flag again.
It should have been cleared after failing to get colors out of
ncurses.
References:
procps-ng/procps#143
The backtrace shown in the bug report referenced below
illustrates a 'normal' program termination interrupted
with some signal, ultimately then causing a top crash.
So this commit just rearranges a little code such that
all signals will be blocked during that rather lengthy
end of program processing regardless of how initiated.
[ in that report, ignore the assertion regarding the ]
[ '-n' option. it obviously was not '1' since do_key ]
[ had been called, which otherwise wouldn't be true. ]
[ and when it is '1' the -d option would be ignored. ]
Reference(s):
https://bugzilla.redhat.com/show_bug.cgi?id=1737552
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit most significant change is the elimination
of the kbd_ENTER entry from that tinfo_tab in iokey().
That entry was a useless artifact left from the commit
which is shown below. It makes no sense to 'translate'
a keystroke into something it already was (i.e. '\n').
The remaining changes just reorder those table entries
for a progression consistent with vim keys: h,j,k & l.
Reference(s):
. fix 'iokey()' flaw preventing proper translations
commit 42f0a341ba
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit standardizes the behavior of the PgUp/PgDn
keys when on the main top display. With PgDn, the last
process will become the first process. With PgUp, that
first task will now appear as the last task displayed.
[ this also eliminates some quirks that were evident ]
[ when paging at or near the end of the process list ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
A recent issue (and merge request) reminded me of gaps
in top's alternate 'vim' navigation keys support. Some
xterm emulators do not pass the customary strings when
keys were used with the <Ctrl> and/or <Alt> modifiers.
While it was a known problem, this issue/merge request
prompted research into the root cause. As it turns out
the problem is traceable to an X resource known by the
name 'eightBitInput'. When 'true' (the default), a key
pressed in combination with <Alt> will not be preceded
by the <Esc> character. Rather, a single character was
presented (modified via an 'eightBitMeta' X resource).
The following approaches would eliminate this problem:
. start xterm thus: xterm -xrm '*eightBitInput: false'
. use: ~/.Xresources with 'Xterm*eightBitInput: false'
. build xterm with 'configure --enable-meta-sends-esc'
( apparently used for CentOS, Fedora, openSUSE, etc. )
. enable xterm's menu via 'configure --enable-toolbar'
( so the user can set the 'Meta Sends Escape' option )
Of course, none of the above steps is desirable from a
user's perspective. So, this patch will add additional
entries to the iokey function's tinfo_tab to represent
strings passed when the <Alt> key does not send <Esc>.
[ hopefully they'll be the same across all platforms ]
Lastly, this patch will also eliminate those redundant
<Atl> + '\', '/', '<' & '>' provisions, which now seem
like overkill and suffer from that same 'eightBitMeta'
xterm problem. And we might as well say goodbye to the
4 '<Alt> + arrow key' table entries (which do not seem
to currently work with any emulator which I can find).
[ what in the world was I thinking way back in 2011? ]
Reference(s):
. issue
https://gitlab.com/procps-ng/procps/issues/135
. merge request
https://gitlab.com/procps-ng/procps/merge_requests/84
Signed-off-by: Jim Warner <james.warner@comcast.net>
Since the patch referenced below traded a compile-time
'sizeof' directive for a run-time 'strlen' call, there
is no need to declare lxc patterns as explicit arrays.
We'll also use the actual lxc patterns by omitting the
beginning slashes ('/') for both of those definitions.
And, looking to the future when most/all lxc users are
using the most recent lxc release, we will make things
slightly more efficient by reversing those two pattern
literals so the most recent pattern was checked first.
Of course, such a change only benefits tasks which are
running in a container. For the majority of processes,
both literals will be compared in that 'if' statement,
assuming the 'LXC' field is currently being displayed.
[ plus, a leftover parenthesis pair has been removed ]
Reference(s):
commit f67127e728
Signed-off-by: Jim Warner <james.warner@comcast.net>
As we're using buffered I/O when writing kernel parameters, write errors
may get delayed until we close the `FILE` stream. As we are currently
outputting the key that is to be set disregarding the return value of
`close_stream`, we may end up in a situation where we report error and
success:
$ sysctl kernel.printk_ratelimit=100000000000000
sysctl: setting key "kernel.printk_ratelimit": error code 22
kernel.printk_ratelimit = 100000000000000
Fix the issue by only outputting the updated value in case
`close_stream` does not report an error.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
When writing to procfs via `proc_write` fails, we try to chunk the
buffer into smaller pieces to work around that issue. When searching for
the next location to split the buffer, though, we can underflow the
buffer in case the current offset is smaller than `LINELEN`. Fix the
issue by passing `cookie->offset` instead of `LINELEN` into `memrchr` in
case `cookie->offset` is smaller than `LINELEN`.
This bug can be triggered on musl-based systems, e.g. by executing
$ sysctl kernel.printk_ratelimit=1000000000000000
As the value is out-of-range, `write` will return an error and set
`errno` to `EINVAL`. As we're only trying to write a smallish buffer
with a length smaller than `LINELEN` and as the buffer does not contain
any newlines, the call
token = (char*)memrchr(cookie->buf+offset, '\n', LINELEN);
will underflow the buffer and crash the program.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
The `fprocopen` function allows users to specify a delimiter chacter
that is used to split very large input lines into smaller chunks. While
the code checks that the caller did actually supply the delimiter, it is
in fact never used to split the string. Instead, the hardcoded default
character ',' is always used to split the string.
Fix the issue by using `cookie->delim` instead.
I thank Guido Jäkel for raising the issue cited in the
merge request referenced below. While restoring 1 line
of code would produce the desired results, it does not
address the root cause of that problem he experienced.
The variable 'smp_num_cpus' was set by libprocps via a
sysconf(_SC_NPROCESSORS_ONLN) call. It was supposed to
represent total number of processors currently online.
It also served as the position in the Cpu_tics[] array
where the /proc/stat line #1 (cpu summary) was stored.
The variable 'Cpu_faux_tot' was valued by top based on
total individual cpus parsed from the /proc/stat file.
It serves as a fence post for Cpu_tics[] array access.
The problem Guido experienced results from a disparity
between those 2 variables, plus one instance where the
wrong variable was used in the summary_show() routine.
. Here is the real culprit, the actual incorrect code:
. summary_hlp(&Cpu_tics[Cpu_faux_tot], N_txt(WORD_a...
Which always should have been represented in this way:
. summary_hlp(&Cpu_tics[smp_num_cpus], N_txt(WORD_a...
------------------------------------------------------
The above 'disparity' might arise in any system when a
cpu is taken offline since there's a 3 second delay in
cpu and memory refreshes in an effort to reduce costs.
Usually this particular condition will be short lived.
However, there is a more persistent problem under lxc.
If a host cpu is taken offline and then brought online
again, within the container sysconf returns the proper
number of online processors. But, /proc/stat does not!
Sadly, I've yet to find a way to coax a container into
refreshing its /proc/stat, short of reboting the host.
[ might that represent a potential bug in lxc logic? ]
Reference(s):
https://gitlab.com/procps-ng/procps/merge_requests/82
Signed-off-by: Jim Warner <james.warner@comcast.net>
With-thanks-to: Guido Jäkel <G.Jaekel@DNB.DE>
The merge request shown below prompted (thankfully) an
examination of our lxc containers logic in readproc.c.
As it turns out, the lxc folks changed that eyecatcher
used to identify containers within a task cgroup file.
So this patch, with little extra cost, will enable the
libprocps lxc_containers() guy to handle both strings.
[ additionally, I was shocked to find lxc allows the ]
[ eyecatcher to be changed at ./configure time. such ]
[ a provision has always existed. unfortunately, the ]
[ changed value was only available to root, assuming ]
[ one wished to tackle that undocumented liblxc api. ]
Reference(s):
. what prompted lxc support reevaluation
https://gitlab.com/procps-ng/procps/merge_requests/82
. original lxc support introduced
commit 0557504f9c
Signed-off-by: Jim Warner <james.warner@comcast.net>
