We're just following the ps program's lead introducing
a new 'USS' field to represent the non-swapped portion
of physical memory ('RSS') not shared by another task.
Signed-off-by: Jim Warner <james.warner@comcast.net>
In that commit referenced below, a new field was added
to the ps program which required adding 2 newlib items
together. Such a need is now satisfied by the library.
So, this commit will just adapt ps for that provision.
Reference(s):
commit e782b1d859
Signed-off-by: Jim Warner <james.warner@comcast.net>
That recent addition of USS to the ps program prompted
this change. Rather than have it (and soon top) add 2
separate items to yield the desired value, we will let
our new library perform the arithmetic when necessary.
Outside of a little extra storage, there is no runtime
costs for such an extension. There is, however, a real
benefit to having such code in the library. Now should
callers choose to sort on this new field, results will
be guaranteed to be what was expected (i.e. accurate).
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the patch referenced below, 2 potential abends were
fixed both of which involved 'alternate display mode'.
The root cause of those abends was a negative value in
the 'begnext' field for other than the current window.
And while that potential is fixed for now the existing
code almost invites such problems again in the future.
So, this patch will remove any temptation to name some
other window in the 'mkVIZrow1' macro. And, since that
macro is not the only source of 'begnext' changes, the
'mkVizrowX' is being added to identify such occasions.
[ and for symmetry i've added a 'mkVIZyes' macro and ]
[ ameliorated an otherwise surreptitious assignment! ]
Reference(s):
commit 8281ac4f98
Signed-off-by: Jim Warner <james.warner@comcast.net>
The library added smaps_rollup fields in the referenced commit.
This commit exploits the new fields to give pss and uss options.
These options were first proposed back in 2015 by Petr Malat
and, with the library update, they are finally made it into ps.
Why use proportional or unique segment size? It is argued that
these give a better idea of the "real" memory usage of a process.
References:
commit 12543b6c76
issue #112https://www.freelists.org/post/procps/PSS-and-USS-support-for-pshttps://lwn.net/Articles/230975/
Signed-off-by: Craig Small <csmall@dropbear.xyz>
- Simplify control flow a bit. We don't need two loop variables, either.
- Consistently use %lld for bytes.
- Fix the base handling for human-readable output. The code used to
calculate *mebibytes* first, then scale that to the required exponent
with the selected base, which is patently wrong.
Fixes https://gitlab.com/procps-ng/procps/-/issues/133
- Simplify control flow a bit. We don't need two loop variables, either.
- Consistently use %lld for bytes.
- Fix the base handling for human-readable output. The code used to
calculate *mebibytes* first, then scale that to the required exponent
with the selected base, which is patently wrong.
Fixes https://gitlab.com/procps-ng/procps/-/issues/133
This commit will address potential abends upon leaving
the windows help or color mapping screens and invoking
alternate display mode ('A'). It only happens if that
current window was changed with multiple 'a'/'w' keys.
So now, rather than leaving a trail of negative values
in the 'begtask' field, compliments of that win_select
function, we'll remove the mkVIZrow1 macro. Henceforth
it will be issued just once per user interaction. Thus
a promise of 'Curwin' only being impacted is restored.
[ my thanks to Vladimir Chren for reporting this bug ]
Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/210https://gitlab.com/procps-ng/procps/-/merge_requests/135
Discovered by:Vladimir Chren <vladimir.chren@gmail.com>
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit will address potential abends upon leaving
the windows help or color mapping screens and invoking
alternate display mode ('A'). It only happens if that
current window was changed with multiple 'a'/'w' keys.
So now, rather than leaving a trail of negative values
in the 'begtask' field, compliments of that win_select
function, we'll remove the mkVIZrow1 macro. Henceforth
it will be issued just once per user interaction. Thus
a promise of 'Curwin' only being impacted is restored.
[ my thanks to Vladimir Chren for reporting this bug ]
Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/210https://gitlab.com/procps-ng/procps/-/merge_requests/135
Discovered by:Vladimir Chren <vladimir.chren@gmail.com>
Signed-off-by: Jim Warner <james.warner@comcast.net>
With that commit referenced below, which preserved the
'4' and + '!' toggles in the rcfile, this VER_J_RCFILE
macro was made superfluous. But, it was never removed.
Reference(s):
commit f858e563b7
Signed-off-by: Jim Warner <james.warner@comcast.net>
in include/c.h we check if HAVE___PROGNAME is defined, but the
corresponding macro for setting (or not setting) it is missing from
the configure script. This commit adds the missing macro, by
copying it from the macro in tmux.
in include/c.h we check if HAVE___PROGNAME is defined, but the
corresponding macro for setting (or not setting) it is missing from
the configure script. This commit adds the missing macro, by
copying it from the macro in tmux.
The two special hugetlbfs items were misnamed. The TBL
reference (table) should be TLB (transaction lookaside
buffer). Besides, I never liked their position anyway!
[ and one macro argument tweak is being snuck in too ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ of course, we had to renumber most existing fields ]
[ with these additions. plus, some typos were fixed. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
My, how time flies. Here we are finally attending to a
2 year old issue at long last (well, at least top is).
In truth, this change was prompted by that more recent
issue #201 and simply represents my initial picks from
among those available with the new library provisions.
Note: we have to bump that rcfile version whenever new
fields are added. That will mean older top programs no
longer can read this top's rcfile. But that's Ok since
top offers a warning before replacing an older rcfile.
Doubtless, more smaps_rollup fields will be introduced
under top as we get more experience with this feature.
However, any such usage comes with tremendoud costs as
was reported for the previous patch and repeated here:
Here is a small preview of just what you will discover
when using this command line: time top/top -d0 -n1000.
------------------------------------ as a regular user
with only PID + RES (statm)
real 0m2.605s
user 0m1.060s
sys 0m1.377s
with only PID + RSS (smaps)
real 0m26.397s 10x more costly
user 0m1.253s
sys 0m24.915s
----------------- as a root (thus smaps for all tasks)
with only PID + RES (statm)
real 0m2.651s
user 0m1.177s
sys 0m1.286s
with only PID + RSS (smaps)
real 0m33.040s 12x more costly
user 0m1.256s
sys 0m31.533s
Reference(s):
. top/ps: add support for PSS reporting
https://gitlab.com/procps-ng/procps/-/issues/112
. ps: expose shared/private memory separately
https://gitlab.com/procps-ng/procps/-/issues/201
Signed-off-by: Jim Warner <james.warner@comcast.net>
A couple of people have suggested that smaps_rollup be
added to the ps program and/or top program. This patch
is intended to set the stage for just such extensions.
There are currently 20 displayable items in the rollup
file. And newlib sometimes uses sscanf when populating
the target, sometimes hsearch and one customized gperf
approach. None of these fit well with the smaps items.
Thus, an approach using a simple table lookup was used
and, by disabling 1 code line, it could be made immune
from changes to the items order (unlike a sscanf call)
and doesn't carry the greater cost of a hsearch/gperf.
Note: The next patch will allow top to display some of
these new fields. Then, it'll be possible to determine
the colossal costs of accessing the smaps_rollup file.
Here is a small preview of just what you will discover
when using the command 'time top/top -d0 -n1000' while
configured with just two fields: PID + 1 memory field.
------------------------------------ as a regular user
with only PID + RES (statm)
real 0m2.605s
user 0m1.060s
sys 0m1.377s
with only PID + RSS (smaps)
real 0m26.397s 10x more costly
user 0m1.253s
sys 0m24.915s
----------------- as a root (thus smaps for all tasks)
with only PID + RES (statm)
real 0m2.651s
user 0m1.177s
sys 0m1.286s
with only PID + RSS (smaps)
real 0m33.040s 12x more costly
user 0m1.256s
sys 0m31.533s
Reference(s):
. ps: expose shared/private memory separately
https://gitlab.com/procps-ng/procps/-/issues/201
. top/ps: add support for PSS reporting
https://gitlab.com/procps-ng/procps/-/issues/112
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit is strictly cosmetic. It was an attempt to
normalize/standardize/alphabetize those #define/#undef
statements. Some missing #undef's were added plus some
comments regarding sources corrected/standardized too.
Signed-off-by: Jim Warner <james.warner@comcast.net>
In anticipation of adding some smaps_rollup stuff, our
end-of-job report will now offer some insight into the
current unused entries for a window's fieldscur array.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Since 2.6.24/33 the kernel knows about guest and guest nice time. That
is the time that is spend in KVM guests. To handle userspace programs
that do not know about this the guest time is also added to user.
Let us provide a guest time column in vmstat that collects both guest
and guest nice into a gu value.
We also subtract that value from the user time as we are now aware of
the guest value.
This commit is different to !113 in several ways:
* newlib already knows about these to values
* vmstat summary already shows these values
* non-wide vmstat squishes the values
So its around the wide vmstat output.
References:
procps-ng/procps!113
Signed-off-by: Craig Small <csmall@dropbear.xyz>
The commit referenced below was well done but needed a
small whitespace tweak to preserve existing alignment.
Reference(s):
. io accounting added
commit a7afe06e6f
Signed-off-by: Jim Warner <james.warner@comcast.net>
This is a modification of MR !122 by @renit1609 to fit the new
library.
Problem statement:
The procps library has no PROC_FILLIO flag to
fetch the proc field "/proc/[pid]/io" data
process-wise.
IO Accounting is not included as part of procps.
Requirement:
We have a requirement to fetch process wise
IO utilization which can be used for monitoring.
When looking through the procps library, I see
that IO Accounting (/proc/[pid]/io) is not being
included as part of procps. There is no such
flag like PROC_FILLIO being included in readproc.h .
Solution:
While looking at the implementation done for
other proc fields, I used the spare bits in app code.
I renamed PROC_SPARE_1 as PROC_FILLIO, the spare bit from
PROC_SPARE_* and used it for fetching /proc/[pid]/io
data as part of the procps library similar to other
fields. I moved the PROC_SPARE_* bits each by 1 bit
to retain the spare bits. Meanwhile added the IO fields
in proc_t structure.
References:
procps-ng/procps!122procps-ng/procps#184
The correct long option for -w is --no-wrap but the man page
said it was --no-linewrap
References:
procps-ng/procps#203
Signed-off-by: Craig Small <csmall@dropbear.xyz>
With 4e7f4237 and 5e73c832, systemd library detection through pkg-config
was changed to unconditionally look for unified libsystemd.
This adds a fallback to match the previous behavior and find the split
libs as well.
References:
procps-ng/procps!128
Signed-off-by: Craig Small <csmall@dropbear.xyz>
nl_langinfo and CODESET are undefined in a musl system. Instead of
uncondionally including langinfo.h, this change includes include/nls.h
which has the tests and work-arounds for systems that don't have these
features. This is similar to how other programs within procps include
langinfo.h via nls.h
References:
procps-ng/procps!130
Signed-off-by: Craig Small <csmall@dropbear.xyz>
This simple two line code change fixes an intermittent
bug whereby %CPU for parent(s) with collapsed children
could be vastly understated from those displayed under
the current 3.3.17 publicly available top & libprocps.
If one started several top instances in the background
using very a small delay interval (zero?), then if the
shell under which they were running was collapsed, you
would see similar %CPU results for both the libraries.
However, when running a demanding 'make' like a kernel
compile (especially if backed by fast processors and a
SSD), then newlib would generally show only 1/3 to 1/2
of the collapsed %CPU values that appeared for 3.3.17.
Of course, now that the bug has been swatted with this
commit the disparities between those results is easily
explained. Since newly created tasks never contributed
tics during the interval where they were created, only
with many short lived tasks would differences surface.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Rather than run risks of more expensive and repetitive
address resolution, we will establish this local index
for a one time cost and avoid any potential gcc bloat.
[ this commit was made in pursuit of a bug involving ]
[ the distortion of elapsed task tics. but, it turns ]
[ out these changes had nothing to do with that bug. ]
[ however, the patch is being retained as desirable. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
That old library defined this field as 'unsigned int'.
However, here it was known as a 'signed int'. Thus for
consistency we'll now also treat it as 'unsigned int'.
[ this commit was made in pursuit of a bug involving ]
[ the distortion of elapsed task tics. but, it turns ]
[ out these changes had nothing to do with that bug. ]
[ however, the patch is being retained as desirable. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
With that commit referenced below, which preserved the
'4' and + '!' toggles in the rcfile, this VER_J_RCFILE
macro was made superfluous. But, it was never removed.
Reference(s):
commit b46af6d213
Signed-off-by: Jim Warner <james.warner@comcast.net>
The pgrep code checks to see if the program is run as pkill or pidwait
and changes its behaviour accordingly. Some older versions of libtool
run the programs as lt-pkill and lt-pidwait which means the tests fail.
We add these two program names to the checks.
Signed-off-by: Craig Small <csmall@dropbear.xyz>
