Currently, it isn't possible to establish an 'Inspect'
pipe that relies on SIGINT to end. That's because this
signal will also end the parent process (top) as well.
So this patch will temporarily ignore that signal when
processing any 'Inspect' pipe, allowing one like this:
. pipe ^I Trace Calls ^I /usr/bin/strace -r -p %d 2>&1
Signed-off-by: Jim Warner <james.warner@comcast.net>
Upon startup there exists the potential for some minor
memory leakage should some rcfile 'Inspect' entries be
invalid. By delaying any malloc/strdup until after the
entries are completely validated we will prevent that.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Parent tasks with collapsed children should have their
cpu reflect any unseen tasks only under the following:
1) When built without TREE_VCPUOFF having been defined
2) Exclusively when 'Show_FOREST' display mode was set
3) And only under the current window when in alternate
display mode (except if TREE_VWINALL has been defined)
So, this commit just ensures these objectives are met.
Reference(s):
. issue that began odyssey
https://gitlab.com/procps-ng/procps/issues/99
. original cpu implementation
commit 7c7903e50d
Signed-off-by: Jim Warner <james.warner@comcast.net>
While this newlib branch did not suffer that SEGV fate
the master branch did with children's %CPU accounting,
it didn't manage the 'TREE_VCPUOFF' #define optimally.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Using Ctrl-V for the collapse children key now appears
as a mistake. First, it's too close to that Ctrl-C key
which would prematurely terminate top. Second, a lower
case 'v' was unused and perfectly compliments an upper
case 'V' which is used to toggle 'forest view' itself.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/99
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just addresses these miscellaneous issues:
. make a few pseudo enum's just a tad more descriptive
. always use 'p' for pointers to a 'struct pids_stack'
. add just a little indent to the 'rSv' macro comments
. rearrange section dealing with new library interface
. always match order of local #undef to parent #define
. forest_begin array index usage is now more efficient
Signed-off-by: Jim Warner <james.warner@comcast.net>
Now, when a parent's children have been collapsed, the
cpu used by those unseen tasks will disappear no more.
Instead such tics will be added to the parent's total.
[ if one wished a return to the 'land of lost tics', ]
[ the '#define TREE_VCPUOFF' directive is available. ]
------------------------------------------------------
Note: With collapsible parents now displaying children
cpu usage, it will eventually be noticed the cpu stats
for the summary area and task areas often vary widely.
It's worth a reminder that for top's summary area each
individual cpu and the cpu summary is limited to 100%,
regardless of how many tics a linux kernel may export.
An individual task is limited to 100% times the number
of threads. But, in no case will cpu usage ever exceed
100% times total number of processors. Such limits are
further reduced under 'Solaris' mode ('I' toggle off).
In this mode, a task cpu usage will never exceed 100%.
These limits will now also apply to collapsed parents.
In addition to those influences, results are subjected
to kernel timer sampling anomalies and the distortions
inherent in a small sample size, made worse by smaller
delay intervals. Often there is just 1 or 2 tics for a
few tasks at smaller intervals such as: 1/10th second.
Anyway, should questions on this subject arise, a good
starting point, beyond the reminders above, is the 1st
link listed below. Those other links were derivatives.
Reference(s):
. from the kernel documentation
https://www.kernel.org/doc/Documentation/cpu-load.txt
. as mentioned in the above kernel documentation
https://lkml.org/lkml/2007/2/12/6
. from above, with many more links on the subject
https://www.boblycat.org/~malc/apc/
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ along the way we'll shorten some of the repetitive ]
[ variable width field narratives in top's man page. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch is the first of three implementing a newlib
branch version of that Jan Rybar master merge request.
With this series we'll ultimately extend 'EXE' support
to both ps and top (plus, everyone else who wants it).
Reference(s):
. master branch merge request
https://gitlab.com/procps-ng/procps/merge_requests/66
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just addresses some edge cases with respect
to 'unseen' tasks. Given the ability to preserve other
filters in the rcfile, it's entirely possible the very
first task(s) may not be visible at top startup. Also,
when switching between windows ('a'/'w') we should try
to always position its row #1 on some visible process.
Lastly, a window might have *NO* visible tasks at all.
Therefore, protect 'window_hlp' from an infinite loop.
Signed-off-by: Jim Warner <james.warner@comcast.net>
To my knowledge, nobody has ever complained about some
anomalies when scrolling vertically if tasks should be
hidden from view. This can happen with the user filter
('u/U') or other filter ('o/O') features. And although
some tasks are not shown, they still impact scrolling.
This is most apparent when that scroll coordinates msg
is on ('C') & up/down arrow keys used (vs. pgup/pgdn).
Now that we can collapse/expand forked children, there
is a potential for yet more of those hidden processes.
So this commit normalizes vertical scrolling providing
an expected behavior. In other words, the up/down keys
skip the unseen tasks to reposition on a visible task.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch is simply preparation for upcoming vertical
scrolling enhancements. With those changes, it will be
impossible to predict what the beginning task position
should be at the time the message is currently issued.
This patch will allow such a message to be shown after
the individual windows' tasks have all been displayed.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The issue cited below really dealt with preserving the
'Other filter' criteria in the rcfile. But as an aside
the htop 'F6' feature (collapsed children) was raised.
I took that as an implied challenge and decided to try
implementing a similar feature in top. So, this commit
will now provide a brand new forest view toggle ('^V')
which will be used to collapse/expand forked children.
[ this patch will also lead to additional patches in ]
[ support of more rational vertical scrolling, since ]
[ many more tasks might now be hidden in some window ]
Reference(s):
. where this secondary issue was raised
https://gitlab.com/procps-ng/procps/issues/99
Signed-off-by: Jim Warner <james.warner@comcast.net>
In anticipation of a new collapsible child feature, we
will have to make some forest view variables available
to that 'keys_task()' function. This commit just moves
the forest view logic ahead of tertiary input support.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Well, after the rearranging and refactoring, all those
active 'other filter' entries for each window will now
be preserved in the user's configuration file via 'W'.
For raising the issue below, thanks to Marco Ippolito.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/99
Signed-off-by: Jim Warner <james.warner@comcast.net>
These modifications are being made now in anticipation
of some coming 'other filter' config file changes. Our
entries must be written last to the rc file since that
is where the users have been told to 'echo' additions.
Therefore, that 'config_insp' function must be adapted
to anticipate a passed buffer that was already primed.
Signed-off-by: Jim Warner <james.warner@comcast.net>
If we are to support preserving 'other filter' entries
in the rcfile, then the current logic setting up those
osel entries for a WIN_t must be shareable for startup
and when interacting with a user. So, this commit just
repositions this current code in a shareable function.
[ along the way, we give the prior guy a proper name ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
When we get around to saving that 'Other Filter' stuff
in the rcfile, we'll need access to the Fieldstab plus
the justify_pad() function. So this commit repositions
two 'osel' functions in anticipation of adding 1 more.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The 'config_file()' function was getting a little long
in the tooth, so this commit simply renames/rearranges
some stuff anticipating 'other filters' in the rcfile.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jeeze, there was no need to employ *both* strchr() and
strrchr() when ensuring fields hadn't been duplicated.
So let's avoid one of those function calls completely.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This does not happen with the default string (" -----timestamp-----"),
but this string is translated (to unknown lengths).
Signed-off-by: Craig Small <csmall@enc.com.au>
Otherwise it leads to NULL-pointer dereferences (in case of localtime()
errors) and indeterminate contents of timebuf (in case of strftime()
errors).
Signed-off-by: Craig Small <csmall@enc.com.au>
Otherwise this may read out-of-bounds (there is no guarantee that 5
bytes are actually available at partition/optarg).
Signed-off-by: Craig Small <csmall@enc.com.au>
The current checks allow out-of-range values (for example, if
getenv/atoi returns ~-2GB, maxcmd becomes ~+2GB after the subtraction).
This is not a security problem, none of this is under an attacker's
control.
Check the return value of sscanf() to make sure that all input items are
properly initialized.
In extended mode (x_option), one_proc() loads the values of start and
perms during one iteration of the while loop, and displays them during
one of the following iterations, but start and perms are variables local
to the while loop: move them out of the while loop, to the beginning of
the function.
Also, display a mapping only if cp2 is properly initialized; otherwise
(for example), mappings that do not belong to a selected range are
displayed, and with a NULL mapping name:
$ pmap -x -A 6FFF00000000,7FFF00000000 $$
...
Address Kbytes RSS Dirty Mode Mapping
000055b3d1e9b000 0 912 0 r-xp (null)
000055b3d2194000 0 16 16 r--p (null)
000055b3d2198000 0 36 36 rw-p (null)
...
Removed const as this causes problems elsewhere.
Signed-off-by: Craig Small <csmall@enc.com.au>
If "cp = strrchr(mapbuf_b, '/')" then this function returns, and
otherwise there is no '/' in mapbuf_b and "cp = strchr(mapbuf_b, '/')"
is always false: remove this second block, since it is never entered.
Also, constify a few things in this function.
Signed-off-by: Craig Small <csmall@enc.com.au>
In the headers, the space was misplaced; for example, "pmap -XX $$"
outputs "VmFlagsMapping" (without a space). Use justify_print() instead
of printf().
There was also an extra space in the output, because vmflags[] (from the
"VmFlags:" line) always ends with a space. Overwriting this last space
with a null byte fixes this misalignment.
Signed-off-by: Craig Small <csmall@enc.com.au>
vmflags[] is a 27*(2+1)=81 char array, but there are 30 flags now (not
27), and even with 27 flags this was an off-by-one overflow (the kernel
always outputs a flag with "%c%c ", so the last +1 is for a space, not
for the terminating null byte). Protect vmflags[] with a maximum field
width, as in the surrounding sscanf() calls.
Signed-off-by: Craig Small <csmall@enc.com.au>
Otherwise "the contents of the array remain unchanged and a null pointer
is returned" or "the array contents are indeterminate and a null pointer
is returned".
Signed-off-by: Craig Small <csmall@enc.com.au>
Also, simplify the code slightly (but functionally equivalent). Check
the return value of xstrdup() only once (yes, it can return NULL).
Adapted slightly to remove goto and leave the format of checks the same.
A lot of the fixes were already in newlib, caught by coverity
References:
commit 25f655891f
Signed-off-by: Craig Small <csmall@enc.com.au>
First problem: saved_argc was used to calculate the size of the array,
but saved_argc was never initialized. This triggers an immediate heap-
based buffer overflow:
$ skill -c0 -c0 -c0 -c0
Segmentation fault (core dumped)
Second problem: saved_argc was not the upper bound anyway, because one
argument can ENLIST() several times (for example, in parse_namespaces())
and overflow the array as well.
Third problem: integer overflow of the size of the array.
No need to "pid_count++;" because "ENLIST(pid," does it already. Right
now this can trigger a heap-based buffer overflow.
Also, remove the unneeded "pid_count = 0;" (it is static, and
skillsnice_parse() is called only once; and the other *_count variables
are not initialized explicitly either).
The memmove() itself does not move the NULL-terminator, because nargs is
decremented first. Copy how skill_sig_option() does it: decrement nargs
last, and remove the "if (nargs - i)" (we are in "while (i < nargs)").
man getline: "If *lineptr is set to NULL and *n is set 0 before the
call, then getline() will allocate a buffer for storing the line. This
buffer should be freed by the user program even if getline() failed."
