Commit Graph

269 Commits

Author SHA1 Message Date
Jim Warner
d310a18fc2 top: exploit new kb_main_available, make Jaromir happy
This patch will trade a former pessimistic calculation
of free physical memory for a more optimistic one that
uses the newly added kb_main_available library export.

But in case one might wish to return to the old former
method, there's a new #define that was made available.

[ the new calculation will affect graphing mode only ]

Reference(s):
http://www.freelists.org/post/procps/systemd-support-to-library,9

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-18 20:49:57 +02:00
Jim Warner
9500dc198c top: trade Page_size for that newly exposed page_bytes
Might as well use the newly exposed sysinfo.h variable
'page_bytes' rather than our own. Plus, in the process
we can avoid incurring yet one more function call hit.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-18 20:49:57 +02:00
Jaromir Capik
6dbe8fd18e docs: top.1 minor fix
RES - memory task has used -> is using
2014-07-17 13:08:29 +02:00
Jim Warner
6cd8691720 top: fix potential 'nan', should a system have no Swap
Gosh, just because most of us might run with some swap
file allocated, not every system might. I only wish my
testing methodology was as sophisticated as Jaromir's.

Reference(s):
http://www.freelists.org/post/procps/latest-top-enhancements,7

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-07 18:43:52 +02:00
Jim Warner
1dd0c4d07f top: as with ps, distinguish between 'T' and 't' state
Wow, even the linux/Documentation/filesystems/proc.txt
document doesn't provide us with that level of detail.

Thank you, Jaromir, for your additional clarification!

Reference(s):
commit 411d218793

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-07 18:43:52 +02:00
Jim Warner
a7741055f1 top: add another translation hint for graphs alignment
This should be the last of this kind of crap. I'll get
to work on some means to no longer burden a translator
with lengths requirements. Ideally each word should be
allowed to stand alone and the minimum/maximum lengths
handled programmatically when our ol' top is executed.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-07 18:43:52 +02:00
Jim Warner
206570e8c4 top: with new startup defaults, tweak the man document
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-07 18:43:52 +02:00
Jim Warner
c75586f523 top: eliminated unreferenced macros & an error message
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-07 18:43:52 +02:00
Jim Warner
8ef6cd91fc top: retire old stale startup defaults in favor of new
For over a decade top has used a startup configuration
mimicking the original redhat top. This decision dates
back to when the forked Sourceforge version was trying
to win over users in battles with that ancient kludge.

Will anybody deny that those defaults are coyote ugly?

Well, it is time that top presented a more modern look
at startup, providing that no saved rcfile exists. But
just in case some distro prefers that old, comfortable
look, there's the '--disable-modern-top' build option.

[ Pssst. With the widened memory fields it turns out ]
[ the 'Mem' default window had become almost useless ]
[ on an 80x24 terminal since %CPU & COMMAND were out ]
[ of view. So some other defaults were tweaked a bit ]
[ whether or not --disable-modern-top was specified. ]

Reference(s)
http://www.freelists.org/post/procps/tops-graph-mode-saga-continues,3

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-01 21:30:46 +10:00
Jim Warner
2199af404a top: maximize recent locale aware numeric enhancements
When startup argument parsing was recently enhanced to
account for LC_NUMERIC settings, some user input logic
dealing with numbers fails to exploit that capability.

This patch extends such enhancements to a running top.

Reference(s):
commit f7b84f45c7
http://www.freelists.org/post/procps/topwatch-floating-point-input,2

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-01 21:30:45 +10:00
Jim Warner
96c330e3b3 top: afford each window its own cpu/memory graph modes
When those new cpu/memory graphs modes were introduced
they had global impact. In other words, the modes that
were chosen for a 'current' window affect Summary Area
appearance for every other window as well, even though
each window sets unique View_STATES/View_MEMORY flags.

I do not know how widespread the use of top's separate
window provisions is, but I do know that documentation
promises every window (field group) provides "a unique
separately configurable summary area". And even though
that promise does not include memory scaling (separate
'E' command) the graph modes are integral to 't' & 'm'
and those were already observed on a per window basis.

So this patch just takes the cpu and memory graph mode
values out of global scope in the configuration file &
gives each window its own unique pair of graph values.

Reference(s):
commit 1d171ec741

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-28 23:46:40 +10:00
Jim Warner
805532ac32 top: fix translation hint to preserve graphs alignment
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-28 23:46:40 +10:00
Jim Warner
f7b84f45c7 top: tweak argument parsing for some locale situations
Boy I hate locale stuff. For code I thought was pretty
robust, Jaromir sure proved that it wasn't. Anyway, me
thinks this commit closes some gaps and will cause top
to behave appropriately under various locale settings.

It does *not* permit top to respond to the ',' and '.'
floating point separator without regard to the locale.
It does, however, enforce proper LC_NUMERIC responses.

Let's look on this commit as an interim solution until
Jaromir can create that proposed 'fp_decode' function.
Who knows, he might even borrow some of our mkfloat().

[ An aside: the coreutils sleep and timeout programs ]
[ claim to permit floating point arguments. However, ]
[ neither one will accept the comma separator should ]
[ the locale be a country that in fact uses a comma. ]

[ In other words, with this commit we are way ahead! ]

Reference(s):
http://www.freelists.org/post/procps/topwatch-floating-point-input
http://www.freelists.org/post/procps/topwatch-floating-point-input,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-25 13:58:31 +02:00
Jim Warner
cec1976511 top: let's not pretend top can catch SIGKILL & SIGSTOP
While there was no harm done setting a handler for the
above two signals, they are in fact uncatchable. Thus,
whenever we ran with valgrind we're politely reminded.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-25 13:58:30 +02:00
Jim Warner
db6381ae04 top: scale length for new graphs to a terminal's width
When the beginning of the Mem/Swap graphs was variable
scaling them to the current terminal's width was a bit
of a costly nightmare. So the graph size was fixed and
subject to truncation. However now that the start of a
graph can be easily predicted, I've revisited scaling.

As it turns out, any cost is minimal & mostly incurred
at an opportune time, at SIGWINCH or user interaction.
Plus, most of the apparent arithmetic is actually just
a means of documenting and will disappear thru compile
time constants in the ultimate generated machine code.

Note: those graphs will now behave just like any other
Summary Area element - they will scale from full sized
down to a terminal width of 80 columns, at which point
those displayed graphs are then subject to truncation.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-24 20:38:30 +10:00
Jim Warner
41ab7f005e top: with new bar graphs, make 'b' toggle unrestricted
While the 'b' toggle remains window based (vs. global)
it should no longer require that the window be visible
and either the 'x' or 'y' toggles to be on. Previously
those requirements were intended to remind a user that
there must be something for this command to highlight.

With the introduction of graph modes (specifically the
the bar graph) the 'bold/reverse' toggle has important
implications beyond highlighting some columns or rows.

The %Cpu(s) graph and Mem portion of the memory graphs
are designed to offer a visual clue as to the separate
elements comprising them. But that separation could be
lost under some X color schemes or when top is running
without color (in monochrome mode) and the block graph
is selected. But, if the graph is then changed to bars
any separation always becomes visible whenever the 'b'
toggle is turned off. Portions then show in 'reverse'.

So from now on we'll check nothing, we'll just toggle.

[ Besides, with all the code thrown at restricting a ]
[ 'b' toggle use, it might have all been for naught. ]
[ That toggle could still be set/unset using the 'Z' ]
[ command and the color mapping screen. Geez Louise! ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-24 20:38:30 +10:00
Jim Warner
d8a8822b5f top: reflect current graph modes state in man document
This patch just beefs up the man documentation for the
new graphs modes while also reflecting the most recent
program changes, prompted by the feedback shown below.

Reference(s):
http://www.freelists.org/post/procps/latest-top-enhancements,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-24 20:35:20 +10:00
Jim Warner
b8614adcb5 top: make '#define GRAPHS_ALIGN' an immutable solution
My original graph modes implementation made no attempt
to align the Cpu & Mem/Swap graphs. I thought, rather,
that such alignment could be best achieved by the user
using top's 'E' memory scaling command toggle. In that
way Mem/Swap prefixes could be reduced by 3 positions,
bringing the beginning '[' into line with the %Cpu(s).

If that proved to be too cumbersome a #define could be
enabled making the Mem/Swap prefix static while adding
a few padding bytes to the %Cpu line(s) for alignment.
It was those waisted bytes that were the most concern.

What I had not counted on was the fact that the memory
lines themselves might become misaligned & that became
likely with more physical memory present. That too can
be cured with the 'E' command but as scaling is raised
we soon reach a meaningless total such as '0.003' even
though the displayed % remains valid (and unchanging).

So this commit implements unconditionally what used to
be conditional. But, instead of waisting padding bytes
we'll put that space to good use with a new 'total %'.

Reference(s):
http://www.freelists.org/post/procps/latest-top-enhancements,1
commit 1d171ec741

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-24 20:35:20 +10:00
Jim Warner
f33d49c6cf top: shorten some lines by changing a few declarations
My first blush graphs modes implementation went just a
tad overboard on identifier lengths. As a result, some
program lines were getting quite long. So, this commit
will simply shorten some excessively long identifiers.

Reference(s):
http://www.freelists.org/post/procps/latest-top-enhancements
commit 1d171ec741

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-24 20:35:20 +10:00
Jim Warner
77376e5c67 top: add graphs modes for cpu and memory, man document
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-22 21:39:55 +10:00
Jim Warner
1d171ec741 top: add graphs modes for cpu and memory, program code
This patch makes 't' (View_STATES) & 'm' (View_MEMORY)
commands into 4-way toggles. The two new modes provide
for two different graphs of the cpu and/or memory use.

These new capabilities are similar to those offered by
the 'htop' program. However they're aesthetically more
pleasing (to me) plus the scalings are more authentic.

Poor ol' top has long been troubled by the comparisons
offered up by the 'htop' program. Many of those things
were only true of the original redhat top while others
are no longer true of this current top program. So let
me use this commit msg to begin to correct the record.

Corrected comparisons between 'htop' & 'top' programs:
------------------------------------------------------
+ htop does not start faster, actually reverse is true
+ top offers scrolling vertically and horizontally too
. (and top offers better <Home> and <End> key support)
+ unassigned keystrokes don't subject top to any delay
. (but htop suffers that annoying ncurses <Esc> delay)
+ in top one need not type the PID to kill the process
+ in top one need not type the PID to renice a process

Some things the 'htop' program was not bragging about:
------------------------------------------------------
+ top can outperform the htop program by a wide margin
+ htop + SIGWINCH = corrupted display + restart likely
+ htop cannot preserve its screen data at suspend/exit
+ the htop column management scheme is very cumbersome
+ htop allows columns to be duplicated again and again
+ htop displays only full command lines, not pgm names
. (and that 'Command' column must always be displayed)
. (and it must always remain as the last column shown)
+ htop does not provide for any sort of command recall
+ htop's search feature does not highlight any matches
+ there is no 'find next' outside of htop search modes
+ htop does not allow Header or Process memory scaling
+ htop provides no flexibility on column justification
+ htop does not provide the means to change col widths
+ htop provides less control over colors configuration
+ htop always overwrites the rcfile with any UI change

Someday, maybe we'll provide a better comparison as an
addendum for (or replacement of) that README.top file.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-22 21:39:55 +10:00
Jim Warner
318919094d top: rearrange Mem & Swap lines and standardize 'used'
In anticipation of upcoming memory graphing provisions
the abbreviations 'Mem' and 'Swap' are being made into
individual translatable strings in order to be reused.

Additionally, the Mem 'used' amount will now no longer
included the 'buffers' and 'cached' values. Thus, each
Mem category becomes unique. This is the approach used
by tools such as 'htop' or the gnome 'System Monitor'.

Lastly, with that change to the 'used' category it has
been repositioned after 'free' on the Mem & Swap lines
making a comparison between 'total' and 'free' easier.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-22 21:39:55 +10:00
Jim Warner
23ebb9f44d top: tweak hotplugged response and frame refresh logic
For some time now, top has refrained from updating the
current number of cpus and memory totals with each and
every refresh cycle. Rather, to lessen overhead costs,
such values are updated periodically (5 min & 3 secs).

The delay in updating the cpu count was only important
with the addition of a cpu, since any loss is detected
immediately. And the large interval was chosen because
of the costs once associated with a glibc sysconf call
and an unlikely scenario of physically adding the cpu.

But the ease with which cpus can be taken offline then
placed back online under linux suggests that 5 minutes
may be too high. So, without addressing the likelihood
of that act, top is now more responsive in these ways:

1) that 5 minute interval has been reduced to 1 minute
2) any key, not just Enter/Space, refreshes cpus & mem

Note: we leave the man document as is, suggesting that
only the Enter/Space keys force an update for hotplug.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-05-28 06:53:19 +10:00
Jim Warner
1e8d0a323b top: add missing summary area info to the man document
Way back for release 3.2.6 of the original procps top,
a patch was introduced to explain abbreviations in the
summary area showing cpu state percentages. Ever since
that time the the 'id/idle' category has been missing.

This patch simply corrects that oversight, having been
noticed after a review of the outstanding Ubuntu bugs.

Reference(s):
. deficiency yet unresolved (May 2010)
https://bugs.launchpad.net/ubuntu/+source/procps/+bug/574624
. patch incorporated into 'ng' (Feb 2011)
commit ee5fd1dce1
. cpu states doc requests (Jun 2005, Jan 2004)
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=312157
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=228899

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-05-28 06:53:19 +10:00
Jim Warner
444fa7102b top: miscellaneous accumulated changes to man document
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-05-13 16:39:49 +02:00
Jim Warner
0caa6d6e67 top: miscellaneous accumulated changes to program code
. prevent any input recall overrun if window downsized
. adjust translation notes for true column hdr maximum

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-05-13 16:39:49 +02:00
Jim Warner
bef6b0f025 top: standardize <Esc> key support with prompted input
In release 3.3.6, some commands were equipped with the
concept of a 'default pid'. The initial implementation
meant that the intuitive <Esc> key would not always be
treated as one would expect under any well behaved UI.

This patch ensures the expected <Esc> key behavior of:
terminating user input while still making possible the
necessary distinction between 'no input' & 'defaults'.

Reference(s):
http://www.freelists.org/post/procps/top-Escape-doesnt-abort-kill-command

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 20:56:48 +02:00
Jim Warner
fe37ad15cd top: avoid a 'nan' when the delay interval is very low
The granularity of /proc/uptime is fixed at hundredths
of a second. And, since we can cycle faster than that,
we are exposed to 'nan' when calculating elapsed time.

This commit will protect us from that outcome when the
delay interval has been set to an extremely low value.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 20:56:48 +02:00
Jim Warner
2f4f175c59 top: swap opening quotes for back-tics in man document
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 20:56:48 +02:00
Jim Warner
c9f7cc7025 top: minimize the usage of apostrophes in man document
In addition to eliminating numerous single quote usage
this commit also escaped '\' a few overlooked hyphens.

And some 'unformatted' spacings were adjusted as well.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 20:56:48 +02:00
Jim Warner
f3e55ee661 top: refactor man document so as to allow translations
The majority of changes in this commit are intended to
enable translation of top's man page. There were three
kinds of errors as seen by that po4a-updatepo program.

. a valid but unrecognized request concerning no-break
. an internally defined macro with a groff .de request
. occasional apostrophe at the beginning of some lines

With respect to the apostrophe, some have been changed
to back-tic since line placement could not be assured.
And other parts were re-flowed to avoid temptations to
escape as \' (technically an acute accent). Of course,
the opening back-tic with closing apostrophe looks odd
when ASCII, but should be rendered correctly as UTF-8.

It may yet be necessary to change the remaining single
'opening' quotes to back-tics as translation proceeds.
Should that become necessary, I intend to reduce quote
usage to the bare minimum throughout the man document.

There were also some formatting changes to enhance the
man2html output and then to other formats via htmldoc.
And, I wish to acknowledge that my meager groff skills
do not serve those programs very well at all. In other
words groff yet remains mostly incomprehensible to me.

Lastly a few content plus copyright updates were made.

Message(s):
. Unknown macro '.c2 `'. Remove it from the document, or refer to the Locale::Po4a::Man manpage to see how po4a can handle new macros.
. This page defines a new macro with '.de'. Since po4a is not a real groff parser, this is not supported.
. Unknown macro ''real time' scheduling priority.'. Remove it from the document, or refer to the Locale::Po4a::Man manpage to see how po4a can handle new macros.

Reference(s):
. oriiginal post/patch
http://www.freelists.org/post/procps/Translations-for-man-pages

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 20:56:48 +02:00
Jim Warner
e2868da34e top: update copyright dates plus 1 preprocessor change
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 13:46:06 +02:00
Jim Warner
22e6582974 top: protect against distortion when system time reset
If a system's time is adjusted backwards, then elapsed
time could appear as negative. This yielded a negative
%CPU value. Alternately if zeros were suppressed ('0')
the result was a blank %CPU column. In both cases that
distortion would last for one display cycle or until a
user forced a display refresh via some keyboard input.

The original recommendation was trading gettimeofday()
for clock_gettime() using CLOCK_MONOTONIC. But on some
systems that might not be possible, forcing the use of
CLOCK_REALTIME instead. Not only would that complicate
the build system, but it may leave us with minus %CPU.

Another approach was to ensure that elapsed time could
never be negative. Of course, this produced distortion
of %CPU values but it would be proportionally correct.
This wasn't dissimilar to a distortion already present
should the time be adjusted forward or backward within
any 'remaining' top delay intervals. These aberrations
would be avoided with clock_gettime & CLOCK_MONOTONIC,
but that is a less than ideal solution as noted above.

This final solution, which originated down under, will
simply rely on the /proc/uptime seconds, which will be
immune to *any* tampering with the system clock. Thus,
we now have a fix for the distortion we didn't know we
suffered plus a negative %CPU that began this odyssey.

Thanks to:
sk.alvin.x@gmail.com, for the original effort
jcapik@redhat.com, for a heads up on CLOCK_MONOTONIC
csmall-procps@enc.com.au, for the best suggestion of all

Reference(s):
. original post/patch
http://www.freelists.org/post/procps/PATCH-top-use-clock-gettime-instead-of-gettimeofday
. heads up on CLOCK_MONOTONIC
http://www.freelists.org/post/procps/PATCH-top-use-clock-gettime-instead-of-gettimeofday,2
. the final solution
http://www.freelists.org/post/procps/PATCH-top-use-clock-gettime-instead-of-gettimeofday,11

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 13:46:06 +02:00
Yuri Chornoivan
2ec9f5c22e Minor i18n fixes
Minor fixes that the translator (Yuri) has found in some of the
strings. You only know how many typos and thinkos you have when
someone is trying to translate it.

Signed-off-by: Craig Small <csmall@enc.com.au>
2014-03-03 21:58:56 +11:00
Jim Warner
24f1fbd9d0 top: avoid name conflict in the next version of stdlib
Since its inception top has always used enumerators to
identify displayable fields. They've taken the form of
P_PID, etc. As it turns out, something has changed for
libc6-dev versions beyond 2.17-93 wherein 'P_PID' will
now be exposed via stdlib.h. I have not pinpointed the
exact cause but it may depend on header include order.

This patch just trades top's long standing 'P_' prefix
convention for that of 'EU_' (short for enumerator). I
cannot find *any* header under /usr/include/ currently
utilizing this particular three character combination.

And as a further safeguard top will henceforth include
'system' specific headers after the standard includes.

Reference(s):
http://www.freelists.org/post/procps/top-wont-compile-anymore

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-02-27 06:30:44 +11:00
Jim Warner
bcf4f5a830 top: restore the former behavior after stderr redirect
When top originally responded to the potential libnuma
stderr write, the library was consistently called with
each refresh cycle. That, in turn, guaranteed that any
warning message would be seen at program end by virtue
of: 1) having been issued before the 2nd refresh cycle
and; 2) benefiting from inherited /dev/null buffering.

A later efficiency refactor meant the numa library may
not always be called with every refresh cycle. Rather,
it was only called if top was in one of two numa views
(the '2' or '3' toggles). That, in turn, resulted in a
loss of any warning message at program end unless numa
mode had been preserved in the rcfile. In other words,
if top was started normally then a single cycle stderr
redirect would have long passed by the time the '2' or
'3' toggle was activated. The warning message actually
was spewed but quickly lost to the full screen refresh
which follows all keyboard interactions with the user.

This commit simply moves the restoration of our stderr
redirect to program end (instead of that first display
refresh). Now, any libnuma stderr warning message will
appear as the concluding output line upon quitting top
without regard to when any numa mode view was invoked.

And since this technique might be useful in some other
context (as an example of how to 'buffer' stderr) it's
been generalized with its own #define. But to maximize
its usefulness, the original redirect should be issued
much earlier in pgm startup than top has chosen to do.

Reference(s):
. original libnuma stderr response (msg seen)
commit 35dc6dcc49
. numa refractoring for efficiency (msg lost)
commit f12c0d5c6e

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-02-22 11:16:22 +11:00
Jim Warner
b6fcb602ce top: provide for discontinuous (not active) NUMA nodes
Apparently there are occasions when NUMA nodes may not
always be contiguous. Under such conditions nodes that
were not used would still occupy precious Summary Area
space showing 100% idle, under the '2' command toggle.

With this commit top will no longer display numa nodes
that have no associated cpu when the '2' toggle is on.
But just in case we wish to return to former behavior,
a new #define called OFF_NUMASKIP has been introduced.

And as an aside, a recent refactor mentioned below set
the stage for this patch to be 'self-tuning'. In other
words, if an inactive/non-displayed node should become
active (if even possible), then top will begin showing
such a node automatically with the next screen update.

Unfortunately, all inactive nodes now 'suppressed' are
still accessible via the '3' command. Those nodes will
just be displayed as empty (no associated cpus shown).
This is not really a top problem but more of a libnuma
and/or user deficiency. The library lacks the means to
validate a node id and the user then input a node that
was not even shown under a '2' toggle Summary display.

( too bad libnuma does not offer an 'is_node_active' )
( type function so top could warn a user when such a )
( discontinuous node was requested using his '3' cmd )

( sure, top could achieve this objective himself but )
( that would require making yet another array global )
( which i'm just not in the mood to do - besides, we )
( have already made enough concessions to libnuma.so )

Lastly, an existing #define (PRETEND_NUMA) was changed
to 'disable' node #1 so as to simulate a discontinuous
node. This allows testing of the '2' and '3' commands.

Reference(s):
http://www.spinics.net/lists/util-linux-ng/msg08671.html
. set stage for self tuning
commit f12c0d5c6e

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-01-20 19:10:22 +01:00
Jim Warner
14ef47af57 top: do not forget the fscanf %s terminating null byte
Reference(s):
http://www.freelists.org/post/procps/procpsng-339-defects-found

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-12-19 15:27:11 +01:00
Jim Warner
4c464acf28 top: follow usual name conventions for global variable
A recent change involving a one cycle stderr redirect,
to handle a libnuma potential transgression, failed to
follow normal global variable naming conventions. This
patch will capitalize the 1st letter of 'Stderr_save'.

Reference(s):
commit 35dc6dcc49

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-12-02 21:37:36 +01:00
Jim Warner
57ab5eed15 top: do not lie about purported alphabetical orderings
Excluding those special X_XON/X_XOF enums, which might
not even be present, restore strict collating order of
all the case labels in the task_show switch statement.

Also, adjust a few sort callbacks for the same reason.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-12-02 21:37:36 +01:00
Jim Warner
af4e6533ba top: increase the maximum number of displayable fields
The recent addition of namespaces, combined with those
potential suse out-of-memory fields, means that we are
close to the maximum number of fields poor ol' top can
display. Imagine, the really old top was limited to 26
fields (28 with the suse hack) and this top had neared
the version 'g' rcfile limits which were a healthy 55.

This patch adds another 15 fields to the maximum while
making it even easier to increase in the future. Also,
top still silently accommodates older config files all
the way back to the original pre-ng version top-3.2.8!

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
675200b20b top: expand the man page to include namespaces support
Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
2aa0951d1b top: expand this program to include namespaces support
Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
89c2f28e39 top: eliminate yet more gcc subscript resolution bloat
This patch is inspired by the 'minimize numa overhead'
patch. It trades the use of subscripts for pointers to
avoid gcc repeated subscript offset calculation bloat.

Now, throughout the cpus_refresh function, a subscript
will be resolved just once & this will (dramatically?)
reduce the path-length taken for each and every frame!

For example, a non-optimized compilation could produce
400+ fewer machine instructions through pointer usage.

[ ok, optimized compiles only save 18+ instructions! ]

Lastly, any residual 'symmetry only' crap is now gone!

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
f12c0d5c6e top: minimize the statistics overhead for numa support
A recent libnuma potential corruption problem solution
has caused me to reevaluate some associated numa logic
for efficiency. Here is a summary of the problems that
exist with current libnuma/user possible interactions:

. Whenever the numa library was present extra overhead
would always be incurred in maintaining the node stats
even when the '2' or '3' commands were not being used.

. As part of such overhead a separate loop was used to
reinitialize each cpu/node structure with each display
cycle so that prior accumulated totals were preserved.
Again, it didn't matter if numa data was really shown.

This commit attempts to refocus on the 'critical path'
costs in a running top by optimizing for the occasions
when numa node data is not being displayed. Under such
conditions, no extra overhead will be incurred whether
or not a distribution has the libnuma library present.

To achieve this goal, some additional overhead will be
incurred, but only when actually displaying numa data.
And all such new costs have been minimized in spite of
the gcc inclination to duplicate subscript resolution.

Reference(s):
commit 24bd950cb2e1722d459461f0f9c0c30a4b9ffdaa

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
bdb2fe0056 top: add some flexibility to dlopen() for numa support
A recent libnuma potential corruption problem solution
suggests that libnuma could change in the future so as
to not spew to stderr. This then raises a question how
top could exploit any such library change since we are
currently locked into version #1 of the library by way
of our dlopen("libnuma.so.1", RTLD_LAZY) runtime call.

While not an ultimate solution, this commit will first
try for the most recent version of that library during
top's startup before trying the original libnuma.so.1.
We do this via the unqualified library soname symlink.

For this new dlopen() call to succeed, technically the
numa 'devel' package would usually have been required,
but that's not always true with every distro. And when
the libnuma.so symlink isn't present, it can always be
manually added should a newer & better behaved library
arrive & users tire of the stderr warning at top exit.

Reference(s):
commit 24bd950cb2e1722d459461f0f9c0c30a4b9ffdaa

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
9c776bbcde top: expand on column highlight quirks in man document
Confession is supposed to be good for the sole, right?

After a senior moment regarding the 'x' toggle quirks,
and thinking top had somehow regressed, I concluded an
additional explanatory note might well be appropriate.

Those quirks were already documented under the 5d & 5e
topics. But there was no such caution documented under
the 'x' command explanation itself, found in topic 4c.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
5a8adee659 top: fix miscellaneous spelling errors in man document
Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
35dc6dcc49 top: address some potential libnuma display corruption
There is a chance that the libnuma library may corrupt
top's display with some stderr warning messages in the
event something under /sys/devices/system/node/ cannot
be accessed. And, while 2 overridable 'weak' functions
are provided to alter such behavior, we can't use them
since top dynamically links to the library via dlopen.

This commit will redirect stderr to '/dev/null' during
just the first screen display cycle. Thus we can avoid
the corruption which would have remained visible until
the underlining screen row's data had finally changed.

Lastly, this patch should allow such a library warning
to actually appear when one finally exits our program.

[ i think the libnuma folks should consider changing ]
[ the error/warning interfaces to accommodate dlopen ]
[ rather than forcing something like the ugly kludge ]
[ we have employed or libnuma dependency on everyone ]

Reference(s):
https://bugzilla.redhat.com/show_bug.cgi?id=998678

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-04 16:00:42 +01:00
Jim Warner
e6a78f2745 top: swat bug impacting 'idle' mode & 'user' filtering
When Other filtering was introduced the nature of what
constituted a displayed row changed. No longer would a
task_show() call guarantee that another line is shown.
Rather, a non-empty string must have also been tested.

Unfortunately, when any task window was being filtered
for 'idle' mode or a particular 'user', the proc index
was incremented twice due to the perils of copy/paste.
Combining such an index increment with the new test of
task_show results works fine if filtering is inactive.

This was a particularly insidious bug which meant that
an adjacent task would be skipped whenever the current
task met 'idle' and/or 'user' filter criteria, and was
not otherwise excluded due to 'Other' filter criteria.

And, since it was the very next task that was ignored,
the bug was very susceptible to a window's sort order.
This could be illustrated when filtering on some user,
while sorting on PID. Then, toggling Forest View could
make otherwise unseen tasks appear and then disappear.

User workarounds are possible via interactive commands
trading the 'i' and 'u'/'U' provisions for the 'o'/'O'
other filtering capability thus avoiding an extra i++.
But that is certainly less than ideal and doesn't help
the 3.3.7 and 3.3.8 distorted command line provisions.

( this little buggie may end up costing me my pocket )
( protector, my coding badge & maybe even my cubicle )

Reference(s):
http://www.freelists.org/post/procps/Idle-elides-nonidle-processes
. bug originated with 'Other' filtering
commit 5edc6fb317

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-09-29 11:51:39 +10:00