Several years after the 'e' & 'E' interactive commands
were introduce to affect memory scaling, an 'E' switch
was added. This was after discovering a dropped Redhat
patch which provided a unique 'M' command line switch.
If only for symmetry it makes sense to offer a similar
command switch ('e') for the Task Area memory scaling.
As was true with 'E', top's help text will show 'e' as
if it were a switch without arguments in order to keep
help text displayed without wrap in an 80x24 terminal.
The man page, however, will show all of the arguments.
Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/165
. 03/2017, added 'E' command line switch
commit b2bd65407a
. 12/2012, added 'e' interactive command
commit 21e550bc08
. 12/2012, added 'E' interactive command
commit bc46f67f9a
Signed-off-by: Jim Warner <james.warner@comcast.net>
The Debian bug referenced below has nothing to do with
locales. In fact, top was made locale independent back
in release 3.3.13 (April, 2018). However, that bug did
reveal some misplaced logic which this patch corrects.
Prompted by the Qualys audit, all rcfile field strings
were checked for potential duplicates which could only
have resulted from some user's manual/malicious edits.
Unfortunately, that code was executed before top had a
chance to enforce the proper/maximum string length (in
the event an extremely old rcfile had just been read).
This created some potential string overrun references.
In top's original 3.3.15 implementation, the potential
overrun extended for 15 characters. That is the number
of field characters added with 3.3.9 (December, 2013).
But, since strchr() was used, no error exit was taken.
In the revised 3.3.16 implementation, the strchr() was
replaced with '&w->rc.fieldscur[n]'. This held overrun
to a single position while producing an error message.
So, this commit just moves that logic to a point where
fieldscur is guaranteed to be longer than EU_MAXPFLGS.
Reference(s):
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=951335
. revised 3.3.16 validation logic
commit 775223a817
. original 3.3.15 validation logic
commit 085351a0ee
Signed-off-by: Jim Warner <james.warner@comcast.net>
When that potential abend at program end was addressed
in the patch shown below, one line of code was removed
in error. That line served to suppress some end-of-job
reports should ATEOJ_RPTSTD or ATEOJ_RPTHSH be active.
So, this patch restores that previously deleted logic.
Reference(s):
. potential SEGV fix, newlib branch
commit 90c22e64ff
Signed-off-by: Jim Warner <james.warner@comcast.net>
A Qualys audit patch, represented in the commit below,
added the _exit() call to our abnormal signal handler.
Unfortunately, that disabled the associated core dump.
This patch restores expected behavior of those signals
whose default produces a core dump file + termination.
Reference(s):
commit e1f419737f
Signed-off-by: Jim Warner <james.warner@comcast.net>
In a translator hint, under a caution, a reference was
made to the "next three items". Unfortunately however,
there was one intervening 'item' to which that caution
did not apply. This commit just relocates that 'item'.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Beyond the copyrights, the single oops in the man page
was introduced in the commit which is referenced below
dealing with some cleanup following that Qualys audit.
Reference(s):
. man page error introduced
commit 4550e60144
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will eliminate a bug which is unique to our
newlib branch. It's extremely rare and only happens if
a search ('L'/'&') is initiated during the period when
fields are currently being auto-sized (AUTOX_MODE on).
This bug surfaces as either all zero results for tasks
displayed or a segmentation fault, depending upon what
fields were activated. It is caused by the timing of a
call to the <pids> 'reset' function. When called after
a task refresh, but before do_key(), this bug appears.
So this patch just ensures that 'reset' will be called
after do_key() & before the tasks have been refreshed.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit will just parallel a pending master branch
merge request referenced below. Note, however, that it
is not really needed in this newlib branch because the
procps_pids_select() function itself provides a 'zero'
delimiter with every caller's designated list of pids.
[ since it's required under the master branch, we're ]
[ repeating it here just for documentation purposes. ]
Reference(s):
https://gitlab.com/procps-ng/procps/merge_requests/86
Originally-by: Yoann Lecuyer <yoann.lecuyer@gmail.com>
Signed-off-by: Jim Warner <james.warner@comcast.net>
The backtrace shown in the bug report referenced below
illustrates a 'normal' program termination interrupted
with some signal, ultimately then causing a top crash.
So this commit just rearranges a little code such that
all signals will be blocked during that rather lengthy
end of program processing regardless of how initiated.
[ in that report, ignore the assertion regarding the ]
[ '-n' option. it obviously was not '1' since do_key ]
[ had been called, which otherwise wouldn't be true. ]
[ and when it is '1' the -d option would be ignored. ]
Reference(s):
https://bugzilla.redhat.com/show_bug.cgi?id=1737552
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit most significant change is the elimination
of the kbd_ENTER entry from that tinfo_tab in iokey().
That entry was a useless artifact left from the commit
which is shown below. It makes no sense to 'translate'
a keystroke into something it already was (i.e. '\n').
The remaining changes just reorder those table entries
for a progression consistent with vim keys: h,j,k & l.
Reference(s):
. fix 'iokey()' flaw preventing proper translations
commit c3323bdb68
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit standardizes the behavior of the PgUp/PgDn
keys when on the main top display. With PgDn, the last
process will become the first process. With PgUp, that
first task will now appear as the last task displayed.
[ this also eliminates some quirks that were evident ]
[ when paging at or near the end of the process list ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
A recent issue (and merge request) reminded me of gaps
in top's alternate 'vim' navigation keys support. Some
xterm emulators do not pass the customary strings when
keys were used with the <Ctrl> and/or <Alt> modifiers.
While it was a known problem, this issue/merge request
prompted research into the root cause. As it turns out
the problem is traceable to an X resource known by the
name 'eightBitInput'. When 'true' (the default), a key
pressed in combination with <Alt> will not be preceded
by the <Esc> character. Rather, a single character was
presented (modified via an 'eightBitMeta' X resource).
The following approaches would eliminate this problem:
. start xterm thus: xterm -xrm '*eightBitInput: false'
. use: ~/.Xresources with 'Xterm*eightBitInput: false'
. build xterm with 'configure --enable-meta-sends-esc'
( apparently used for CentOS, Fedora, openSUSE, etc. )
. enable xterm's menu via 'configure --enable-toolbar'
( so the user can set the 'Meta Sends Escape' option )
Of course, none of the above steps is desirable from a
user's perspective. So, this patch will add additional
entries to the iokey function's tinfo_tab to represent
strings passed when the <Alt> key does not send <Esc>.
[ hopefully they'll be the same across all platforms ]
Lastly, this patch will also eliminate those redundant
<Atl> + '\', '/', '<' & '>' provisions, which now seem
like overkill and suffer from that same 'eightBitMeta'
xterm problem. And we might as well say goodbye to the
4 '<Alt> + arrow key' table entries (which do not seem
to currently work with any emulator which I can find).
[ what in the world was I thinking way back in 2011? ]
Reference(s):
. issue
https://gitlab.com/procps-ng/procps/issues/135
. merge request
https://gitlab.com/procps-ng/procps/merge_requests/84
Signed-off-by: Jim Warner <james.warner@comcast.net>
While setting the size of that Hide_pid array to equal
total pids high water mark was probably safe, in truth
there is no real relationship. At some point one could
exceed that HWM if the 'v' toggle was used extensively
and at least 1 of those entries remained non-negative.
This commit simply divorces Hide_tot from the pids HWM
and bases Hide_pid array size on actual run-time need.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Currently, except for tasks that have no parents, when
a process' children are collapsed the '+' indicator is
shown in the first position within that COMMAND field.
This commit simply provides for indenting the '+' char
so it displays next to that program name/command line.
Signed-off-by: Jim Warner <james.warner@comcast.net>
In that commit referenced below, a few edge cases were
addressed regarding vertical positioning involving any
'hidden' tasks. But, 2 additional edge cases remained.
In a running top, if the user employed 'other filters'
(o/O) or 'user filters' (u/U) proper vertical position
was not ensured. And, while this could be easily fixed
by striking the home/end or up/down arrow keys, it was
very poor etiquette to shift this burden to the users.
So, this patch plugs that gap, automating the process.
Reference(s):
commit 9d59ddc466
Signed-off-by: Jim Warner <james.warner@comcast.net>
That prior patch set the stage for eliminating the use
of that 'procps.h' header, while retaining support for
a ./configure -DXTRA_PROCPS_DEBUG' during development.
This commit just eliminates top's use of 'procps.h' in
favor of a separate include for needed newlib headers.
Signed-off-by: Jim Warner <james.warner@comcast.net>
From the outset, top has tried to provide some minimal
garbage collection in support of forest view collapse.
For example, with every 'v' keystroke, a check is made
of the currently targeted pids. If all were negative,
which means expanded, that Hide_pid array was emptied.
Recently, yet another efficiency was added wherein the
continuing scan for a targeted pid was terminated when
a match was found. But, one more inefficiency existed.
When a task which was subject to collapse under forest
view mode has disappeared (ended), repeatedly scanning
for such a pid with each iteration makes little sense.
So this commit will negate such targeted pids and thus
avoid scanning every current task looking for a match.
Then, if 'v' is ever stuck at some point in the future
there will be a chance to empty that Hide_pid[] array.
[ hopefully this will be a final tweak of the forest ]
[ view collapse stuff, but cross your fingers anyway ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
In forest view mode, once a collapsible parent process
and all of its children (if any) have been identified,
there is no longer a need to scan the remaining tasks.
So this patch will just force a new scan for any other
'Hide_pid' entries which might remain to be identified
after a targeted parent has been completely processed.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch includes the following miscellaneous stuff:
. ensure 1 space before any '*' ptr sizeof() reference
. explain the rather cryptic 'ioa' guy a little better
Signed-off-by: Jim Warner <james.warner@comcast.net>
The top program has always specified the maximum stack
depth at 'new' time. Then, in those stacks the minimum
number of result structures were used for representing
only fields actually being displayed in the 4 windows.
That, however, complicated all subsequent access since
each field's enumerator then had to be translated into
a relative position when interacting with the library.
This was accomplished by that Fieldstab 'erel' member.
So this patch eliminates an extra level of indirection
by fully exploiting the existing maximum sized stacks.
Now, the enumerators that top uses to represent fields
also represent their relative positions in each stack.
[ for fields not actually displayed, the position in ]
[ a stack is represented by the 'PIDS_extra' struct. ]
[ thus, there isn't any real library costs for those ]
[ enumerators/fields which aren't currently visible. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Currently, it isn't possible to establish an 'Inspect'
pipe that relies on SIGINT to end. That's because this
signal will also end the parent process (top) as well.
So this patch will temporarily ignore that signal when
processing any 'Inspect' pipe, allowing one like this:
. pipe ^I Trace Calls ^I /usr/bin/strace -r -p %d 2>&1
Signed-off-by: Jim Warner <james.warner@comcast.net>
Upon startup there exists the potential for some minor
memory leakage should some rcfile 'Inspect' entries be
invalid. By delaying any malloc/strdup until after the
entries are completely validated we will prevent that.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Parent tasks with collapsed children should have their
cpu reflect any unseen tasks only under the following:
1) When built without TREE_VCPUOFF having been defined
2) Exclusively when 'Show_FOREST' display mode was set
3) And only under the current window when in alternate
display mode (except if TREE_VWINALL has been defined)
So, this commit just ensures these objectives are met.
Reference(s):
. issue that began odyssey
https://gitlab.com/procps-ng/procps/issues/99
. original cpu implementation
commit 7c7903e50d
Signed-off-by: Jim Warner <james.warner@comcast.net>
While this newlib branch did not suffer that SEGV fate
the master branch did with children's %CPU accounting,
it didn't manage the 'TREE_VCPUOFF' #define optimally.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Using Ctrl-V for the collapse children key now appears
as a mistake. First, it's too close to that Ctrl-C key
which would prematurely terminate top. Second, a lower
case 'v' was unused and perfectly compliments an upper
case 'V' which is used to toggle 'forest view' itself.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/99
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just addresses these miscellaneous issues:
. make a few pseudo enum's just a tad more descriptive
. always use 'p' for pointers to a 'struct pids_stack'
. add just a little indent to the 'rSv' macro comments
. rearrange section dealing with new library interface
. always match order of local #undef to parent #define
. forest_begin array index usage is now more efficient
Signed-off-by: Jim Warner <james.warner@comcast.net>
Now, when a parent's children have been collapsed, the
cpu used by those unseen tasks will disappear no more.
Instead such tics will be added to the parent's total.
[ if one wished a return to the 'land of lost tics', ]
[ the '#define TREE_VCPUOFF' directive is available. ]
------------------------------------------------------
Note: With collapsible parents now displaying children
cpu usage, it will eventually be noticed the cpu stats
for the summary area and task areas often vary widely.
It's worth a reminder that for top's summary area each
individual cpu and the cpu summary is limited to 100%,
regardless of how many tics a linux kernel may export.
An individual task is limited to 100% times the number
of threads. But, in no case will cpu usage ever exceed
100% times total number of processors. Such limits are
further reduced under 'Solaris' mode ('I' toggle off).
In this mode, a task cpu usage will never exceed 100%.
These limits will now also apply to collapsed parents.
In addition to those influences, results are subjected
to kernel timer sampling anomalies and the distortions
inherent in a small sample size, made worse by smaller
delay intervals. Often there is just 1 or 2 tics for a
few tasks at smaller intervals such as: 1/10th second.
Anyway, should questions on this subject arise, a good
starting point, beyond the reminders above, is the 1st
link listed below. Those other links were derivatives.
Reference(s):
. from the kernel documentation
https://www.kernel.org/doc/Documentation/cpu-load.txt
. as mentioned in the above kernel documentation
https://lkml.org/lkml/2007/2/12/6
. from above, with many more links on the subject
https://www.boblycat.org/~malc/apc/
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ along the way we'll shorten some of the repetitive ]
[ variable width field narratives in top's man page. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just addresses some edge cases with respect
to 'unseen' tasks. Given the ability to preserve other
filters in the rcfile, it's entirely possible the very
first task(s) may not be visible at top startup. Also,
when switching between windows ('a'/'w') we should try
to always position its row #1 on some visible process.
Lastly, a window might have *NO* visible tasks at all.
Therefore, protect 'window_hlp' from an infinite loop.
Signed-off-by: Jim Warner <james.warner@comcast.net>
To my knowledge, nobody has ever complained about some
anomalies when scrolling vertically if tasks should be
hidden from view. This can happen with the user filter
('u/U') or other filter ('o/O') features. And although
some tasks are not shown, they still impact scrolling.
This is most apparent when that scroll coordinates msg
is on ('C') & up/down arrow keys used (vs. pgup/pgdn).
Now that we can collapse/expand forked children, there
is a potential for yet more of those hidden processes.
So this commit normalizes vertical scrolling providing
an expected behavior. In other words, the up/down keys
skip the unseen tasks to reposition on a visible task.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch is simply preparation for upcoming vertical
scrolling enhancements. With those changes, it will be
impossible to predict what the beginning task position
should be at the time the message is currently issued.
This patch will allow such a message to be shown after
the individual windows' tasks have all been displayed.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The issue cited below really dealt with preserving the
'Other filter' criteria in the rcfile. But as an aside
the htop 'F6' feature (collapsed children) was raised.
I took that as an implied challenge and decided to try
implementing a similar feature in top. So, this commit
will now provide a brand new forest view toggle ('^V')
which will be used to collapse/expand forked children.
[ this patch will also lead to additional patches in ]
[ support of more rational vertical scrolling, since ]
[ many more tasks might now be hidden in some window ]
Reference(s):
. where this secondary issue was raised
https://gitlab.com/procps-ng/procps/issues/99
Signed-off-by: Jim Warner <james.warner@comcast.net>
In anticipation of a new collapsible child feature, we
will have to make some forest view variables available
to that 'keys_task()' function. This commit just moves
the forest view logic ahead of tertiary input support.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Well, after the rearranging and refactoring, all those
active 'other filter' entries for each window will now
be preserved in the user's configuration file via 'W'.
For raising the issue below, thanks to Marco Ippolito.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/99
Signed-off-by: Jim Warner <james.warner@comcast.net>
These modifications are being made now in anticipation
of some coming 'other filter' config file changes. Our
entries must be written last to the rc file since that
is where the users have been told to 'echo' additions.
Therefore, that 'config_insp' function must be adapted
to anticipate a passed buffer that was already primed.
Signed-off-by: Jim Warner <james.warner@comcast.net>
If we are to support preserving 'other filter' entries
in the rcfile, then the current logic setting up those
osel entries for a WIN_t must be shareable for startup
and when interacting with a user. So, this commit just
repositions this current code in a shareable function.
[ along the way, we give the prior guy a proper name ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
When we get around to saving that 'Other Filter' stuff
in the rcfile, we'll need access to the Fieldstab plus
the justify_pad() function. So this commit repositions
two 'osel' functions in anticipation of adding 1 more.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The 'config_file()' function was getting a little long
in the tooth, so this commit simply renames/rearranges
some stuff anticipating 'other filters' in the rcfile.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jeeze, there was no need to employ *both* strchr() and
strrchr() when ensuring fields hadn't been duplicated.
So let's avoid one of those function calls completely.
Signed-off-by: Jim Warner <james.warner@comcast.net>
We now use the actual terminfo 'max_colors' value with
the 'color mapping' screen, not that hard coded '256'.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/96
Signed-off-by: Jim Warner <james.warner@comcast.net>
When not displaying all tasks (the 'i' toggle is off),
the concept of vertical scrolling has no real meaning.
However, only 2 keys (up/down) impacting that vertical
position were currently being disabled with this mode.
This patch will extend such treatment to the following
additional vertical impact keys: pgup,pgdn,home & end.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This program does a good job of policing that vertical
scrolled position, ensuring that total tasks are never
exceeded. However, during transitions from thread mode
to normal task mode (the 'H' toggle) that wasn't true.
And while there was no real harm done, it did make the
use of up/down arrow keys "appear" disabled especially
if that scroll message was not displayed ('C' toggle).
This patch simply forces a return to row #1 whenever a
user toggles that display between thread & task modes.
Signed-off-by: Jim Warner <james.warner@comcast.net>
