Commit Graph

13 Commits

Author SHA1 Message Date
Qualys Security Advisory
efae601c3c 0047-proc/whattime.c: Always initialize buf.
In the human_readable case; otherwise the strcat() that follows may
append bytes to the previous contents of buf.

Also, slightly enlarge buf, as it was a bit too tight.

Could also replace all sprintf()s with snprintf()s, but all the calls
here output a limited number of characters, so they should be safe.

---------------------------- adapted for newlib branch
. the source file is now proc/uptime.c
. function is now named 'procps_uptime_sprint()'
. new human readable function 'procps_uptime_sprint_short()'
. both were already initialized, so just raised size of 2 buffers

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:35:19 +10:00
Jim Warner
18e684d65d library: eliminate all dependencies on alloc.h/alloc.c
While that old master branch library may utilize those
memory allocation functions found in the alloc module,
it was inappropriate for this newlib branch to subject
callers to a stderr message followed by an early exit.

Of course, the old libprocps offered a message handler
override provision (xalloc_err_handler) but that, too,
would seem to be inappropriate for our modern library.

[ remember the battles fought with that damn libnuma ]

So, this commit will tweak those old inherited sources
setting the stage for standardized return values/errno
settings in connection with a memory allocation error.

------------------------------------------------------
Along the way, we'll address the following miscellany:

. Completely eliminate usage of anything from alloc.h.
This, of course, entails our own error checking of the
alternative allocation calls from stdlib.h & string.h.

. Eliminate use of the strdup function where possible,
as with 'procps_uptime' and 'procps_loadavg' routines.

. Whack some obsolete code (getslabinfo) in sysinfo.c.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-12-20 21:18:53 +11:00
Kyle Laker
3651280194 whattime: Show 0 minutes in pretty output
When supplying the -p command to uptime, it does not display any
sections where the value is less than 1; however, after a reboot, this
causes the command to just output "up". Showing 0 minutes when the
system has been up for less than a minute makes it clear a reboot just
occurred.

References:
 commit 325d68b7c3

Signed-off-by: Craig Small <csmall@enc.com.au>
2017-09-25 08:36:51 +10:00
Craig Small
6b5cb345c5 library: procps_uptime() return value is a status
procps_uptime, previously just plain uptime() used to put the
uptime (as a double) in the first argument and return uptime
(as an int).

It meant if you ran
 myuptime2 = procps_uptime(&myuptime1, NULL);
You might get different results for myuptime1 and myuptime2 because
they are different types.

Most library calls use the return value to return the status,
procps_uptime was in the middle.

Until now.

This function will return 0 on success. If you want (for whatever
reason) uptime as an int then cast it.

All of the procps binaries didn't use the return value for uptime
except ps which set a variable to it but never used it anywhere.
2016-05-01 16:50:25 +10:00
Jim Warner
88daa89883 miscellaneous: silence a whole bunch of clang warnings
[ but most definitely not all of them by a long shot ]

Reference(s):
proc/diskstat.c:186:17: warning: unused variable 'is_disk' [-Wunused-variable]
    int retval, is_disk;
                ^
proc/namespace.c:110:1: warning: control may reach end of non-void function [-Wreturn-type]
}
^
proc/readproc.c:1131:50: warning: address of array 'ent->d_name' will always evaluate to 'true' [-Wpointer-bo
    if(unlikely(unlikely(!ent) || unlikely(!ent->d_name))) return 0;
                                           ~~~~~~^~~~~~
proc/readproc.c:1158:50: warning: address of array 'ent->d_name' will always evaluate to 'true' [-Wpointer-bo
    if(unlikely(unlikely(!ent) || unlikely(!ent->d_name))) return 0;
                                           ~~~~~~^~~~~~
proc/sysinfo.c:45:12: warning: unused variable 'stat_fd' [-Wunused-variable]
static int stat_fd = -1;
           ^
proc/sysinfo.c:49:12: warning: unused variable 'meminfo_fd' [-Wunused-variable]
static int meminfo_fd = -1;
           ^
proc/sysinfo.c:51:12: warning: unused variable 'vminfo_fd' [-Wunused-variable]
static int vminfo_fd = -1;
           ^
proc/sysinfo.c:53:12: warning: unused variable 'vm_min_free_fd' [-Wunused-variable]
static int vm_min_free_fd = -1;
           ^
proc/uptime.c:157:12: warning: unused variable 'realseconds' [-Wunused-variable]
    time_t realseconds;
           ^
proc/uptime.c:158:16: warning: unused variable 'realtime' [-Wunused-variable]
    struct tm *realtime;
               ^
vmstat.c:574:20: warning: format specifies type 'unsigned int' but the argument has type 'unsigned long' [-Wformat]
                   DSTAT(PROCPS_DISKSTAT_READ_TIME),
                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vmstat.c:578:20: warning: format specifies type 'unsigned int' but the argument has type 'unsigned long' [-Wformat]
                   DSTAT(PROCPS_DISKSTAT_WRITE_TIME),
                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
watch.c:230:7: warning: variable 'endptr' is uninitialized when used here [-Wuninitialized]
        if (*endptr == '\0') set_ansi_attribute(0); /* [m treated as [0m */
             ^~~~~~

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-09-21 22:34:27 +10:00
Craig Small
617a4d0f70 library: Add space after days for uptime
Uptime output for both w and uptime command were showing no
comma or space after days.

$ ./uptime
 18:32:21 up 22 days7 min,  6 users,  load average: 0.23, 0.46, 0.64

Minor tweak to fix this.
2015-09-07 18:38:39 +10:00
Jim Warner
34395be330 library: suppress zero 'days' under the <uptime.h> API
The former whattime logic used to suppress that 'days'
output when the system had been up less than 24 hours.

But since the refactor for newlib, '0 days' was always
output under those conditions. So this commit restores
the former expected behavior of suppressing that item.

[ plus an erroneous calculation of uphours was fixed ]

[ and the clang warnings shown below were also fixed ]

Reference(s):
proc/uptime.c:74:10: warning: unused variable 'buf' [-Wunused-variable]
    char buf[256];
         ^
proc/uptime.c:131:58: warning: data argument not used by format string [-Wformat-extra-args]
        pos += sprintf(upbuf + pos, "%d min, ", uphours, upminutes);
                                    ~~~~~~~~~~           ^
proc/uptime.c:175:15: warning: expression result unused [-Wunused-value]
        comma +1;
        ~~~~~ ^~

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-09-06 21:59:17 +10:00
Craig Small
c3e85cef73 library: loadavg change to procps_loadavg 2015-07-01 21:47:30 +10:00
Jim Warner
336748ecc0 misc: remove yet more darn trailing whitespace buildup
Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-01 21:28:22 +10:00
Craig Small
639daf5468 library: Update uptime calls to standard format
Changed all the uptime related functions to use the
standard naming procps_uptime_*
2015-06-29 22:09:59 +10:00
Craig Small
cbf25b93e3 library: more mem and stat fixes
Make distcheck now succeeds.
Changed some of the binaries to use the new API.
2015-06-26 22:37:29 +10:00
Craig Small
05efbebb66 library: Fix up stat API
Adjusted vmstat to use the new API for memory and CPU statistics
2015-06-26 22:37:28 +10:00
Craig Small
d7932b9a13 library: uptime API changes
Removed the printf_uptime, binaries can do printf easily enough.
sprint_uptime split into two as there wasn't a lot of common
code
 sprint_uptime(): old style uptime line
 sprint_uptime_short(): short new style "uptime -p"

Hertz_hack needed this, no sane system uses the code (I think)
so just assume 100 like we do in FreeBSD.
2015-06-26 22:37:28 +10:00