write_mapping() will do the following:
openat(proc_dir_fd, map_file, O_WRONLY);
An attacker could create a directory containing a symlink named
"uid_map" pointing to any file owned by root, and thus allow him to
overwrite any root-owned file.
Closes#635
newuidmap and newgidmap currently take an integner pid as
the first argument, determining the process id on which to
act. Accept also "fd:N", where N must be an open file
descriptor to the /proc/pid directory for the process to
act upon. This way, if you
exec 10</proc/99
newuidmap fd:10 100000 0 65536
and pid 99 dies and a new process happens to take pid 99 before
newuidmap happens to do its work, then since newuidmap will use
openat() using fd 10, it won't change the mapping for the new
process.
Example:
// terminal 1:
serge@jerom ~/src/nsexec$ ./nsexec -W -s 0 -S 0 -U
about to unshare with 10000000
Press any key to exec (I am 129176)
// terminal 2:
serge@jerom ~/src/shadow$ exec 10</proc/129176
serge@jerom ~/src/shadow$ sudo chown root src/newuidmap src/newgidmap
serge@jerom ~/src/shadow$ sudo chmod u+s src/newuidmap
serge@jerom ~/src/shadow$ sudo chmod u+s src/newgidmap
serge@jerom ~/src/shadow$ ./src/newuidmap fd:10 0 100000 10
serge@jerom ~/src/shadow$ ./src/newgidmap fd:10 0 100000 10
// Terminal 1:
uid=0(root) gid=0(root) groups=0(root)
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Use of these macros, apart from the benefits mentioned in the commit
that adds the macros, has some other good side effects:
- Consistency in getting the size of the object from sizeof(type),
instead of a mix of sizeof(type) sometimes and sizeof(*p) other
times.
- More readable code: no casts, and no sizeof(), so also shorter lines
that we don't need to cut.
- Consistency in using array allocation calls for allocations of arrays
of objects, even when the object size is 1.
Cc: Valentin V. Bartenev <vbartenev@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This macros have several benefits over the standard functions:
- The type of the allocated object (not the pointer) is specified as an
argument, which improves readability:
- It is directly obvious what is the type of the object just by
reading the macro call.
- It allows grepping for all allocations of a given type.
This is admittedly similar to using sizeof() to get the size of the
object, but we'll see why this is better.
- In the case of reallocation macros, an extra check is performed to
make sure that the previous pointer was compatible with the allocated
type, which can avoid some mistakes.
- The cast is performed automatically, with a pointer type derived from
the type of the object. This is the best point of this macro, since
it does an automatic cast, where there's no chance of typos.
Usually, programmers have to decide whether to cast or not the result
of malloc(3). Casts usually hide warnings, so are to be avoided.
However, these functions already return a void *, so a cast doesn't
really add much danger. Moreover, a cast can even add warnings in
this exceptional case, if the type of the cast is different than the
type of the assigned pointer. Performing a manual cast is still not
perfect, since there are chances that a mistake will be done, and
even ignoring accidents, they clutter code, hurting readability.
And now we have a cast that is synced with sizeof.
- Whenever the type of the object changes, since we perform an explicit
cast to the old type, there will be a warning due to type mismatch in
the assignment, so we'll be able to see all lines that are affected
by such a change. This is especially important, since changing the
type of a variable and missing to update an allocation call far away
from the declaration is easy, and the consequences can be quite bad.
Cc: Valentin V. Bartenev <vbartenev@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We'll expand the contents in a following commit, so let's move the file
to a more generic name, have a dedicated header, and update includes.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Use the new header for xstrdup()
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This is guaranteed by ISO C. Now that we require ISO C (and even POSIX)
to compile, we can simplify this code.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
strncat(3), strlcpy(3), and many other functions are often misused for
catenating strings, when they should never be used for that. strlcat(3)
is good. However, there's no equivalent to strlcat(3) similar to
snprintf(3). Let's add stpecpy(), which is similar to strlcat(3), but
it is also the only function compatible with stpeprintf(), which makes
it more useful than strlcat(3).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
[v]stpeprintf() are similar to [v]snprintf(3), but they allow chaining.
[v]snprintf(3) are very dangerous for catenating strings, since the
obvious ways to do it invoke Undefined Behavior, and the ways that avoid
UB are very error-prone.
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Every non-const pointer converts automatically to void *.
- Every pointer converts automatically to void *.
- void * converts to any other pointer.
- const void * converts to any other const pointer.
- Integer variables convert to each other.
I changed the declaration of a few variables in order to allow removing
a cast.
However, I didn't attempt to edit casts inside comparisons, since they
are very delicate. I also kept casts in variadic functions, since they
are necessary, and in allocation functions, because I have other plans
for them.
I also changed a few casts to int that are better as ptrdiff_t.
This change has triggered some warnings about const correctness issues,
which have also been fixed in this patch (see for example src/login.c).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We could use the standard (C11) _Noreturn qualifier, but it will be
deprecated in C23, and replaced by C++'s [[noreturn]], which is
compatible with the GCC attribute, so let's directly use the attribute,
and in the future we'll be able to switch to [[]].
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Recently, we removed support for 'struct utmpx'. We did it because utmp
and utmpx are identical, and while POSIX specifies utmpx (and not utmp),
GNU/Linux documentation seems to favor utmp. Also, this project
defaulted to utmp, so changing to utmpx would be more dangerous than
keeping old defaults, even if it's supposed to be the same.
Now, I just found more code that didn't make much sense: lib/utent.c
provides definitions for getutent(3) and friends in case the system
doesn't provide them, but we don't provide prototypes for those
definitions, so code using the functions would have never compiled.
Let's just remove these definitions as dead code.
Fixes: 3be7b9d75a ("Remove traces of utmpx")
Fixes: 170b76cdd1 ("Disable utmpx permanently")
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
In variadic functions we still do the cast. In POSIX, it's not
necessary, since NULL is required to be of type 'void *', and 'void *'
is guaranteed to have the same alignment and representation as 'char *'.
However, since ISO C still doesn't mandate that, and moreover they're
doing dubious stuff by adding nullptr, let's be on the cautious side.
Also, C++ requires that NULL is _not_ 'void *', but either plain 0 or
some magic stuff.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We do need the unoptimized version of csrand_uniform() for high values
of `n`, since the optimized version depends on having __int128, and it's
not available on several platforms, including ARMv7, IA32, and MK68k.
This reverts commit 848f53c1d3c1362c86d3baab6906e1e4419d2634; however,
I applied some tweaks to the reverted commit.
Reported-by: Adam Sampson <ats@offog.org>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Now that we optimized csrand_uniform(), we don't need these functions.
This reverts commit 7c8fe291b1260e127c10562bfd7616961013730f.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It is common to use the expression 'sizeof(x) * CHAR_BIT' to mean the
width in bits of a type or object. Now that there are _WIDTH macros for
some types, indicating the number of bits that they use, it makes sense
to wrap this calculation in a macro of a similar name.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The old code didn't produce very good random numbers. It had a bias.
And that was from performing some unnecessary floating-point
calculations that overcomplicate the problem.
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Björn Esser <besser82@fedoraproject.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Sam James <sam@gentoo.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This API is similar to arc4random_uniform(3). However, for an input of
0, this function is equivalent to csrand(), while arc4random_uniform(0)
returns 0.
This function will be used to reimplement csrand_interval() as a wrapper
around this one.
The current implementation of csrand_interval() doesn't produce very good
random numbers. It has a bias. And that comes from performing some
unnecessary floating-point calculations that overcomplicate the problem.
Looping until the random number hits within bounds is unbiased, and
truncating unwanted bits makes the overhead of the loop very small.
We could reduce loop overhead even more, by keeping unused bits of the
random number, if the width of the mask is not greater than
ULONG_WIDTH/2, however, that complicates the code considerably, and I
prefer to be a bit slower but have simple code.
BTW, Björn really deserves the copyright for csrand() (previously known
as read_random_bytes()), since he rewrote it almost from scratch last
year, and I kept most of its contents. Since he didn't put himself in
the copyright back then, and BSD-3-Clause doesn't allow me to attribute
derived works, I won't add his name, but if he asks, he should be put in
the copyright too.
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Björn Esser <besser82@fedoraproject.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Sam James <sam@gentoo.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
These functions implement bit manipulation APIs, which will be added to
C23, so that in the far future, we will be able to replace our functions
by the standard ones, just by adding the stdc_ prefix, and including
<stdbit.h>.
However, we need to avoid UB for an input of 0, so slightly deviate from
C23, and use a different name (with _wrap) for distunguishing our API
from the standard one.
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
A set of APIs similar to arc4random(3) is complex enough to deserve its
own file.
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Björn Esser <besser82@fedoraproject.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Joseph Myers <joseph@codesourcery.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
strlcpy(3) might not be visible since it is declared in <bsd/string.h>.
This can lead to warnings, like:
fields.c: In function 'change_field':
fields.c:103:17: warning: implicit declaration of function 'strlcpy'; did you mean 'strncpy'? [-Wimplicit-function-declaration]
103 | strlcpy (buf, cp, maxsize);
| ^~~~~~~
| strncpy
../lib/fields.c:103:17: warning: type of 'strlcpy' does not match original declaration [-Wlto-type-mismatch]
103 | strlcpy (buf, cp, maxsize);
| ^
/usr/include/bsd/string.h:44:8: note: return value type mismatch
44 | size_t strlcpy(char *dst, const char *src, size_t siz);
| ^
/usr/include/bsd/string.h:44:8: note: type 'size_t' should match type 'int'
/usr/include/bsd/string.h:44:8: note: 'strlcpy' was previously declared here
/usr/include/bsd/string.h:44:8: note: code may be misoptimized unless '-fno-strict-aliasing' is used
Instead of using volatile pointers to prevent the compiler from
optimizing the call away, use a memory barrier.
This requires support for embedded assembly, which should be fine after
the recent requirement bumps.
memset_s() has a different signature than memset(3) or explicit_bzero(),
thus the current code would not compile. Also memset_s()
implementations are quite rare.
Use the C23 standardized version memset_explicit(3).
Fixes: 7a799ebb ("Ensure memory cleaning")
Commit 90424e7c ("Don't warn when failed to open /etc/nsswitch.conf")
removed the logging for failing to read /etc/nsswitch.conf to reduce the
noise in the case the file does not exists (e.g. musl based systems).
Reintroduce a warning if /etc/nsswitch.conf exists but we failed to read
it (e.g. permission denied).
Improves: 90424e7c ("Don't warn when failed to open /etc/nsswitch.conf")
Systems can suffer power interruptions whilst .lock files are in /etc,
preventing scripts and other automation tools from updating shadow's
files which persist across boots.
This commit replaces that mechanism with file locking to avoid problems
of power interruption/crashing.
Minor tweak to groupmems man page, requested by 'xx' on IRC.
Signed-off-by: ed neville <ed@s5h.net>
- Since strncpy(3) is not designed to write strings, but rather
(null-padded) character sequences (a.k.a. unterminated strings), we
had to manually append a '\0'. strlcpy(3) creates strings, so they
are always terminated. This removes dependencies between lines, and
also removes chances of accidents.
- Repurposing strncpy(3) to create strings requires calculating the
location of the terminating null byte, which involves a '-1'
calculation. This is a source of off-by-one bugs. The new code has
no '-1' calculations, so there's almost-zero chance of these bugs.
- strlcpy(3) doesn't padd with null bytes. Padding is relevant when
writing fixed-width buffers to binary files, when interfacing certain
APIs (I believe utmpx requires null padding at lease in some
systems), or when sending them to other processes or through the
network. This is not the case, so padding is effectively ignored.
- strlcpy(3) requires that the input string is really a string;
otherwise it crashes (SIGSEGV). Let's check if the input strings are
really strings:
- lib/fields.c:
- 'cp' was assigned from 'newft', and 'newft' comes from fgets(3).
- lib/gshadow.c:
- strlen(string) is calculated a few lines above.
- libmisc/console.c:
- 'cons' comes from getdef_str, which is a bit cryptic, but seems
to generate strings, I guess.1
- libmisc/date_to_str.c:
- It receives a string literal. :)
- libmisc/utmp.c:
- 'tname' comes from ttyname(3), which returns a string.
- src/su.c:
- 'tmp_name' has been passed to strcmp(3) a few lines above.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It is Undefined Behavior to declare errno (see NOTES in its manual page).
Instead of using the errno dummy declaration, use one that doesn't need
a comment.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- USER_NAME_MAX_LENGTH was being calculated in terms of utmpx. Do it
in terms of utmp.
- Remove utmpx support from the whishlist.
- Remove unused tests about utmpx members.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
On Linux, utmpx and utmp are identical. However, documentation (manual
pages) covers utmp, and just says about utmpx that it's identical to
utmp. It seems that it's preferred to use utmp, at least by reading the
manual pages.
Moreover, we were defaulting to utmp (utmpx had to be explicitly enabled
at configuration time). So, it seems safer to just make it permanent,
which should not affect default builds.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
In a previous commit, we made USE_TERMIOS unconditionally defined.
Let's just remove it, and remove the condition everywhere.
Reported-by: Iker Pedrosa <ipedrosa@redhat.com>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
They are required by POSIX.1-2001.
Link: <https://github.com/shadow-maint/shadow/pull/600>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
