sysvinit/man/shutdown.8
Werner Fink f69ea1f550 * Add fix for Debian bug #536574 -- Can be enabled by -DACCTON_OFF
* Add helper program fstab-decode to make it easier to handle
   /etc/mtab content. Patch by Miloslav Trmac and Fedora.
 * Add fix for Debian bug #335023 - Make sure TERM is set on FreeBSD.
 * Add fix for Debian bug #374038 - Make it clear that shutdown -c can
   only cancel a waiting shutdown, not an active one.
 * Add not to pidof manual page about the use of readlink(2). Patch by
   Bill Nottingham and Fedora.
 * Add changes for Debian bug #68621 - Add PAM support for programs spawned
   by init on the console like sulogin. Based on patch by Topi Miettinen.
2010-03-23 14:37:01 +00:00

216 lines
7.8 KiB
Groff

'\" -*- coding: UTF-8 -*-
.\" Copyright (C) 1998-2003 Miquel van Smoorenburg.
.\"
.\" This program is free software; you can redistribute it and/or modify
.\" it under the terms of the GNU General Public License as published by
.\" the Free Software Foundation; either version 2 of the License, or
.\" (at your option) any later version.
.\"
.\" This program is distributed in the hope that it will be useful,
.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.\" GNU General Public License for more details.
.\"
.\" You should have received a copy of the GNU General Public License
.\" along with this program; if not, write to the Free Software
.\" Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
.\"
.\"{{{}}}
.\"{{{ Title
.TH SHUTDOWN 8 "November 12, 2003" "" "Linux System Administrator's Manual"
.\"}}}
.\"{{{ Name
.SH NAME
shutdown \- bring the system down
.\"}}}
.\"{{{ Synopsis
.SH SYNOPSIS
.B /sbin/shutdown
.RB [ \-akrhPHfFnc ]
.RB [ \-t
.IR sec ]
.I time
.RI [ "warning message" ]
.\"}}}
.\"{{{ Description
.SH DESCRIPTION
\fBshutdown\fP brings the system down in a secure way. All logged-in users are
notified that the system is going down, and \fBlogin\fP(1) is blocked.
It is possible to shut the system down immediately or after a specified delay.
All processes are first notified that the system is going down by the
signal \s-2SIGTERM\s0. This gives programs like \fBvi\fP(1)
the time to save the file being edited,
mail and news processing programs a chance to exit cleanly, etc.
\fBshutdown\fP does its job by signalling the \fBinit\fP process,
asking it to change the runlevel.
Runlevel \fB0\fP is used to halt the system, runlevel \fB6\fP is used
to reboot the system, and runlevel \fB1\fP is used to put to system into
a state where administrative tasks can be performed; this is the default
if neither the \fI-h\fP or \fI-r\fP flag is given to \fBshutdown\fP.
To see which actions are taken on halt or reboot see the appropriate
entries for these runlevels in the file \fI/etc/inittab\fP.
.\"}}}
.\"{{{ Options
.SH OPTIONS
.\"{{{ -a
.IP "\fB\-a\fP
Use \fB/etc/shutdown.allow\fP.
.\"}}}
.\"{{{ -k
.IP \fB\-k\fP
Don't really shutdown; only send the warning messages to everybody.
.\"}}}
.\"{{{ -r
.IP \fB\-r\fP
Reboot after shutdown.
.\"}}}
.\"{{{ -h
.IP \fB\-h\fP
Halt or power off after shutdown.
.\"}}}
.\"{{{ -P
.IP \fB\-P\fP
Halt action is to turn off the power.
.\"}}}
.\"{{{ -H
.IP \fB\-H\fP
Modifier to the -h flag. Halt action is to halt or drop into boot
monitor on systems that support it. Must be used with the -h flag.
.\"}}}
.\"{{{ -f
.IP \fB\-f\fP
Skip fsck on reboot.
.\"}}}
.\"{{{ -F
.IP \fB\-F\fP
Force fsck on reboot.
.\"}}}
.\"{{{ -n
.IP \fB\-n\fP
[DEPRECATED] Don't call \fBinit\fP(8) to do the shutdown but do it ourself.
The use of this option is discouraged, and its results are not always what
you'd expect.
.\"}}}
.\"{{{ -c
.IP \fB\-c\fP
Cancel a waiting shutdown. ("shutdown now" is no longer waiting.) With
this option it is of course not possible to give the time argument, but
you can enter explanatory message arguments on the command line that
will be sent to all users.
.\"}}}
.\"{{{ -t sec
.IP "\fB\-t\fP \fIsec\fP"
Tell \fBinit\fP(8) to wait \fIsec\fP seconds between sending processes the
warning and the kill signal, before changing to another runlevel.
.\"}}}
.\"{{{ time
.IP \fItime\fP
When to shutdown.
.\"}}}
.\"{{{ warning-message
.IP "\fIwarning message\fP"
Message to send to all users.
.\"}}}
.PP
The \fItime\fP argument can have different formats. First, it can be an
absolute time in the format \fIhh:mm\fP, in which \fIhh\fP is the hour
(1 or 2 digits) and \fImm\fP is the minute of the hour (in two digits).
Second, it can be in the format \fB+\fP\fIm\fP, in which \fIm\fP is the
number of minutes to wait. The word \fBnow\fP is an alias for \fB+0\fP.
.PP
If shutdown is called with a delay, it will create the advisory file
.I /etc/nologin
which causes programs such as \fIlogin(1)\fP to not allow new user
logins. This file is created five minutes before the shutdown sequence
starts. Shutdown removes this file if it is stopped before it
can signal init (i.e. it is cancelled or something goes wrong).
It also removes it before calling init to change the runlevel.
.PP
The \fB\-f\fP flag means `reboot fast'. This only creates an advisory
file \fI/fastboot\fP which can be tested by the system when it comes
up again. The boot rc file can test if this file is present, and decide not
to run \fBfsck\fP(1) since the system has been shut down in the proper way.
After that, the boot process should remove \fI/fastboot\fP.
.PP
The \fB\-F\fP flag means `force fsck'. This only creates an advisory
file \fI/forcefsck\fP which can be tested by the system when it comes
up again. The boot rc file can test if this file is present, and decide
to run \fBfsck\fP(1) with a special `force' flag so that even properly
unmounted file systems get checked.
After that, the boot process should remove \fI/forcefsck\fP.
.PP
The \fB-n\fP flag causes \fBshutdown\fP not to call \fBinit\fP,
but to kill all running processes itself.
\fBshutdown\fP will then turn off quota, accounting, and swapping
and unmount all file systems.
.\"}}}
.\"{{{ Files
.SH ACCESS CONTROL
\fBshutdown\fP can be called from \fBinit\fP(8) when the magic keys
\fBCTRL-ALT-DEL\fP are pressed, by creating an appropriate entry in
\fI/etc/inittab\fP. This means that everyone who has physical access
to the console keyboard can shut the system down. To prevent this,
\fBshutdown\fP can check to see if an authorized user is logged in on
one of the virtual consoles. If \fBshutdown\fP is called with the \fB-a\fP
argument (add this to the invocation of shutdown in /etc/inittab),
it checks to see if the file \fI/etc/shutdown.allow\fP is present.
It then compares the login names in that file with the list of people
that are logged in on a virtual console (from \fI/var/run/utmp\fP). Only
if one of those authorized users \fBor root\fP is logged in, it will
proceed. Otherwise it will write the message
.sp 1
.nf
\fBshutdown: no authorized users logged in\fP
.fi
.sp 1
to the (physical) system console. The format of \fI/etc/shutdown.allow\fP
is one user name per line. Empty lines and comment lines (prefixed by a
\fB#\fP) are allowed. Currently there is a limit of 32 users in this file.
.sp 1
Note that if \fI/etc/shutdown.allow\fP is not present, the \fB-a\fP
argument is ignored.
.SH HALT OR POWEROFF
The \fB-H\fP option just sets the \fIinit\fP environment variable
\fIINIT_HALT\fP to \fIHALT\fP, and the \fB-P\fP option just sets
that variable to \fIPOWEROFF\fP. The shutdown script that calls
\fBhalt\fP(8) as the last thing in the shutdown sequence should
check these environment variables and call \fBhalt\fP(8) with
the right options for these options to actually have any effect.
Debian 3.1 (sarge) supports this.
.SH FILES
.nf
/fastboot
/etc/inittab
/etc/init.d/halt
/etc/init.d/reboot
/etc/shutdown.allow
.fi
.\"}}}
.SH NOTES
A lot of users forget to give the \fItime\fP argument
and are then puzzled by the error message \fBshutdown\fP produces. The
\fItime\fP argument is mandatory; in 90 percent of all cases this argument
will be the word \fBnow\fP.
.PP
Init can only capture CTRL-ALT-DEL and start shutdown in console mode.
If the system is running the X window System, the X server processes
all key strokes. Some X11 environments make it possible to capture
CTRL-ALT-DEL, but what exactly is done with that event depends on
that environment.
.PP
Shutdown wasn't designed to be run setuid. /etc/shutdown.allow is
not used to find out who is executing shutdown, it ONLY checks who
is currently logged in on (one of the) console(s).
.\"{{{ Author
.SH AUTHOR
Miquel van Smoorenburg, miquels@cistron.nl
.\"}}}
.\"{{{ See also
.SH "SEE ALSO"
.BR fsck (8),
.BR init (8),
.BR halt (8),
.BR poweroff (8),
.BR reboot (8)
.\"}}}