80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 56, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2023-02-18 02:02:03 +03:00
parent e18fb5cd20
commit 1e520375a5
56 changed files with 9607 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

294
HDD/WDC/WD800/WD800AAJS-00TDA0/953E96AE6156 Normal file
View File

@@ -0,0 +1,294 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-STABLE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD800AAJS-00TDA0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.00A01
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Tue Feb 14 14:32:03 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2460) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 34) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 200 200 051 - 23569
3 Spin_Up_Time PO---- 167 165 021 - 2625
4 Start_Stop_Count -O--CK 097 097 000 - 3964
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-- 200 200 051 - 0
9 Power_On_Hours -O--CK 078 078 000 - 16076
10 Spin_Retry_Count PO--C- 100 100 051 - 0
11 Calibration_Retry_Count PO--C- 100 100 051 - 0
12 Power_Cycle_Count -O--CK 097 097 000 - 3901
194 Temperature_Celsius -O---K 110 086 000 - 33
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--C- 150 150 000 - 661
198 Offline_Uncorrectable ----C- 112 001 000 - 1151
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 105022
200 Multi_Zone_Error_Rate P--R-- 149 058 051 - 1649
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 25106 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 25106 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 00 01 10 00 51 00 00 e3 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 7b 40 6a ab 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 15 6a 7b 00 ab c6 00 00 00 00:00:09.488 NOP [Abort queued commands]
03 56 c6 6a a4 00 10 00 15 00 00 00 00 01:56:28.886 CFA REQUEST EXTENDED ERROR
00 10 00 00 05 6a 12 03 9d 40 00 00 00 00:00:01.280 NOP [Abort queued commands]
Error 25105 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 00 01 10 00 51 00 00 e3 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 56 40 6a a4 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 05 6a 56 00 a4 c6 00 00 00 00:00:05.392 NOP [Abort queued commands]
03 10 30 6a 9d 00 10 00 05 00 00 00 00 01:56:27.026 CFA REQUEST EXTENDED ERROR
00 00 00 00 f5 6a 10 00 9d c6 00 00 00 00:00:26.376 NOP [Abort queued commands]
Error 25104 [23] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 00 01 10 00 51 00 00 e3 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 12 40 6a 9d 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 08 00 00 67 6a 10 00 9d 30 00 00 00 00:00:01.296 NOP [Abort queued commands]
00 ca 40 6a 95 00 00 00 f5 00 00 00 03 01:56:27.024 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 e5 6a ca 00 95 c6 00 00 00 00:01:02.736 NOP [Abort queued commands]
Error 25103 [22] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 00 01 10 00 51 00 00 e3 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 ca 40 6a 95 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 e5 6a ca 00 95 c6 00 00 00 00:01:02.736 NOP [Abort queued commands]
03 83 c6 6a 8e 00 10 00 e5 00 00 00 00 01:56:23.299 CFA REQUEST EXTENDED ERROR
00 10 00 00 d5 6a 46 03 87 40 00 00 00 00:00:54.528 NOP [Abort queued commands]
Error 25102 [21] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 00 01 10 00 51 00 00 e3 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 83 40 6a 8e 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 d5 6a 83 00 8e c6 00 00 00 00:00:58.640 NOP [Abort queued commands]
03 46 c6 6a 87 00 10 00 d5 00 00 00 00 01:56:21.446 CFA REQUEST EXTENDED ERROR
00 10 00 00 c5 6a 0a 03 80 40 00 00 00 00:00:50.432 NOP [Abort queued commands]
Error 25101 [20] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 00 01 10 00 51 00 00 e3 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 46 40 6a 87 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 c5 6a 46 00 87 c6 00 00 00 00:00:54.544 NOP [Abort queued commands]
03 08 30 6a 80 00 10 00 c5 00 00 00 00 01:56:19.594 CFA REQUEST EXTENDED ERROR
00 00 00 00 b5 6a 08 00 80 c6 00 00 00 00:00:26.376 NOP [Abort queued commands]
Error 25100 [19] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 00 01 10 00 51 00 00 e3 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 0a 40 6a 80 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 08 00 00 67 6a 08 00 80 30 00 00 00 00:00:50.448 NOP [Abort queued commands]
00 cb 40 6a 78 00 00 00 b5 00 00 00 03 01:56:19.592 NOP [Reserved subcommand] [OBS-ACS-2]
00 20 00 00 55 6a cb 03 78 40 00 00 00 00:00:46.352 NOP [Abort queued commands]
Error 25099 [18] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 00 01 10 00 51 00 00 e3 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 cb 40 6a 78 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 20 00 00 55 6a cb 03 78 40 00 00 00 00:00:46.352 NOP [Abort queued commands]
00 af 40 6a 71 00 00 00 35 00 00 00 03 01:56:17.739 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 15 6a ae 00 71 c6 00 00 00 00:00:13.600 NOP [Abort queued commands]
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: --/35 Celsius
Lifetime Min/Max Temperature: --/58 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/65 Celsius
Min/Max Temperature Limit: 1/70 Celsius
Temperature History Size (Index): 128 (86)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 29 Device-to-host register FISes sent due to a COMRESET
0x8000 4 6314 Vendor specific