80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 1098, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2020-11-03 14:43:05 +03:00
parent f8d5dc7417
commit 51569f7bd1
1098 changed files with 194109 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

325
HDD/Samsung/HD154/HD154UI/114F90ABF5C8 Normal file
View File

@@ -0,0 +1,325 @@
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F2 EG
Device Model: SAMSUNG HD154UI
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AG01118
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Fri Aug 14 21:59:31 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19273) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 322) minutes.
Conveyance self-test routine
recommended polling time: ( 34) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 072 072 011 - 9340
4 Start_Stop_Count -O--CK 099 099 000 - 1167
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 10725
9 Power_On_Hours -O--CK 094 094 000 - 30628
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 165
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 001 001 000 - 149
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 066 066 000 - 34 (Min/Max 17/34)
194 Temperature_Celsius -O---K 075 066 000 - 25 (Min/Max 17/40)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 47199528
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 256
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 256 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 256 [7] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 ff fe 00 00 5f bf 0e 49 40 00 65534 sectors at LBA = 0x5fbf0e49 = 1606356553
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 ff fe 00 00 5f bf 0e 49 40 08 05:44:47.040 WRITE DMA EXT
61 00 00 00 f8 00 00 00 bf 10 52 40 00 05:44:47.040 WRITE FPDMA QUEUED
61 00 00 00 f8 00 00 00 bf 0e 52 40 00 05:44:47.040 WRITE FPDMA QUEUED
60 00 00 00 0d 00 00 ff 45 9b 0e 40 00 05:44:46.960 READ FPDMA QUEUED
61 00 00 00 f8 00 00 00 bf 0c 52 40 00 05:44:46.960 WRITE FPDMA QUEUED
Error 255 [6] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 48 ff ff 00 00 5f bf 04 49 40 00 at LBA = 0x5fbf0449 = 1606353993
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 f8 00 00 00 bf 01 52 40 00 05:44:16.770 WRITE FPDMA QUEUED
35 00 00 00 e9 00 00 5f bf 03 61 40 08 05:44:16.770 WRITE DMA EXT
60 00 00 00 0c 00 00 ff 56 38 59 40 00 05:44:16.730 READ FPDMA QUEUED
61 00 00 00 f8 00 00 00 bf 02 52 40 00 05:44:16.730 WRITE FPDMA QUEUED
61 00 00 00 f8 00 00 00 be fe 52 40 00 05:44:16.730 WRITE FPDMA QUEUED
Error 254 [5] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 48 ff ff 00 00 5f ba e8 32 40 00 at LBA = 0x5fbae832 = 1606084658
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 01 00 00 00 00 ba e8 33 40 00 05:43:46.580 WRITE FPDMA QUEUED
35 00 00 00 f0 00 00 5f ba e7 43 40 08 05:43:46.580 WRITE DMA EXT
60 00 00 00 0d 00 00 00 76 e9 8b 40 00 05:43:46.530 READ FPDMA QUEUED
61 00 00 01 00 00 00 00 ba e6 33 40 00 05:43:46.530 WRITE FPDMA QUEUED
61 00 00 00 f8 00 00 00 be f7 52 40 00 05:43:46.530 WRITE FPDMA QUEUED
Error 253 [4] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 48 ff ff 00 00 5f ba dd 32 40 00 at LBA = 0x5fbadd32 = 1606081842
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 01 00 00 00 00 ba dd 33 40 00 05:43:16.440 WRITE FPDMA QUEUED
35 00 00 00 ef 00 00 5f ba dc 45 40 08 05:43:16.440 WRITE DMA EXT
60 00 00 00 0c 00 00 00 4c a8 0c 40 00 05:43:16.390 READ FPDMA QUEUED
61 00 00 01 00 00 00 00 ba db 33 40 00 05:43:16.390 WRITE FPDMA QUEUED
61 00 00 00 f8 00 00 00 be ec 52 40 00 05:43:16.390 WRITE FPDMA QUEUED
Error 252 [3] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 48 ff fe 00 00 5f ba d2 32 40 00 at LBA = 0x5fbad232 = 1606079026
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 01 00 00 00 00 ba d3 33 40 00 05:42:46.260 WRITE FPDMA QUEUED
61 00 00 01 00 00 00 00 ba d2 33 40 00 05:42:46.260 WRITE FPDMA QUEUED
35 00 00 00 d0 00 00 5f ba d1 63 40 08 05:42:46.260 WRITE DMA EXT
60 00 00 00 0d 00 00 ff 1b 58 e0 40 00 05:42:46.210 READ FPDMA QUEUED
61 00 00 01 00 00 00 00 ba d0 33 40 00 05:42:46.210 WRITE FPDMA QUEUED
Error 251 [2] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 48 ff fe 00 00 5f ba c7 32 40 00 at LBA = 0x5fbac732 = 1606076210
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 01 00 00 00 00 ba c8 33 40 00 05:42:16.060 WRITE FPDMA QUEUED
61 00 00 01 00 00 00 00 ba c7 33 40 00 05:42:16.060 WRITE FPDMA QUEUED
35 00 00 00 e5 00 00 5f ba c6 4e 40 08 05:42:16.060 WRITE DMA EXT
60 00 00 00 0c 00 00 00 46 97 1a 40 00 05:42:16.010 READ FPDMA QUEUED
61 00 00 01 00 00 00 00 ba c5 33 40 00 05:42:16.010 WRITE FPDMA QUEUED
Error 250 [1] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 48 ff ff 00 00 5f ba bc 32 40 00 at LBA = 0x5fbabc32 = 1606073394
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 01 00 00 00 00 ba bc 33 40 00 05:41:45.870 WRITE FPDMA QUEUED
35 00 00 00 e8 00 00 5f ba bb 4c 40 08 05:41:45.870 WRITE DMA EXT
60 00 00 00 0d 00 00 00 48 af 68 40 00 05:41:45.800 READ FPDMA QUEUED
61 00 00 01 00 00 00 00 ba ba 33 40 00 05:41:45.800 WRITE FPDMA QUEUED
61 00 00 00 f8 00 00 00 be cf 52 40 00 05:41:45.800 WRITE FPDMA QUEUED
Error 249 [0] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 48 ff ff 00 00 5f ba b1 32 40 00 at LBA = 0x5fbab132 = 1606070578
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 01 00 00 00 00 ba b1 33 40 00 05:41:15.620 WRITE FPDMA QUEUED
35 00 00 00 ef 00 00 5f ba b0 44 40 08 05:41:15.620 WRITE DMA EXT
60 00 00 00 0c 00 00 00 63 a5 fe 40 00 05:41:15.580 READ FPDMA QUEUED
61 00 00 01 00 00 00 00 ba af 33 40 00 05:41:15.580 WRITE FPDMA QUEUED
61 00 00 00 f8 00 00 00 be c6 52 40 00 05:41:15.580 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 23008 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 25 Celsius
Power Cycle Min/Max Temperature: --/40 Celsius
Lifetime Min/Max Temperature: --/48 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (71)
SMART WRITE LOG does not return COUNT and LBA_LOW register
SCT (Get) Error Recovery Control command failed
Device Statistics page 0x00 is invalid (page=0x00, nentries=0)
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

103
HDD/Samsung/HD154/HD154UI/4C1ACE7BF30C Normal file
View File

@@ -0,0 +1,103 @@
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F2 EG
Device Model: SAMSUNG HD154UI
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AG01118
User Capacity: 1,500,300,828,160 bytes [1.50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Mon Oct 19 06:59:49 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 41) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: (18583) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 311) minutes.
Conveyance self-test routine
recommended polling time: ( 32) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 072 072 011 Pre-fail Always - 9150
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 111
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 77168
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 111
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 076 064 000 Old_age Always - 24 (Min/Max 24/32)
194 Temperature_Celsius 0x0022 076 063 000 Old_age Always - 24 (Min/Max 23/33)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2692735490
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 90% 571 -
# 2 Extended offline Interrupted (host reset) 90% 44830 -
# 3 Short offline Interrupted (host reset) 90% 44830 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.