80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 1098, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2020-11-03 14:43:05 +03:00
parent f8d5dc7417
commit 51569f7bd1
1098 changed files with 194109 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

304
HDD/WDC/WD3000/WD3000GLFS-01F8U0/3DD074D5A4DA Normal file
View File

@@ -0,0 +1,304 @@
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital VelociRaptor
Device Model: WDC WD3000GLFS-01F8U0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 03.03V01
User Capacity: 300,069,052,416 bytes [300 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 10000 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Fri Aug 7 10:56:03 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 128
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4680) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 200 200 051 - 107
3 Spin_Up_Time PO---- 202 199 021 - 2875
4 Start_Stop_Count -O--CK 097 097 000 - 3261
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-- 200 200 000 - 0
9 Power_On_Hours -O--CK 041 041 000 - 43792
10 Spin_Retry_Count -O--C- 100 100 000 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 2932
192 Power-Off_Retract_Count -O--CK 200 200 000 - 144
193 Load_Cycle_Count -O--CK 199 199 000 - 3261
194 Temperature_Celsius -O---K 113 103 000 - 34
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--C- 200 200 000 - 0
198 Offline_Uncorrectable ----C- 200 200 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 71 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 71 [22] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 0b 61 57 ea 00 00 00 00 00 02 00 0a 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 18 08 00 77 57 0b 0a ea 61 00 02 08 00:01:03.264 DEVICE RESET
0a 0b 60 57 ea 00 18 08 77 08 02 00 1d 10:55:15.979 [RESERVED]
08 10 08 00 bf 57 0b 1d ea 60 00 02 08 00:00:48.912 DEVICE RESET
Error 70 [21] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 48 61 57 d2 00 00 00 00 00 02 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 38 10 00 97 57 47 01 d2 61 00 02 08 00:00:38.712 DEVICE RESET
01 47 60 57 d2 00 38 08 97 10 02 00 1d 10:55:09.895 [RESERVED]
08 30 08 00 cf 57 47 1d d2 60 00 02 08 00:00:53.040 DEVICE RESET
Error 69 [20] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 42 61 57 ba 00 00 00 00 00 02 00 15 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 38 08 00 8f 57 42 15 ba 61 00 02 08 00:00:36.664 DEVICE RESET
15 3b 61 57 ba 00 38 08 8f 08 02 00 0a 10:55:03.746 RECALIBRATE [RET-4]
08 28 08 00 f7 57 3b 0a ba 61 00 02 08 00:01:03.272 DEVICE RESET
Error 68 [19] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 96 60 57 a2 00 00 00 00 00 02 00 1d 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 38 50 00 d7 57 96 1d a2 60 00 02 08 00:00:55.096 DEVICE RESET
1d 96 60 57 a2 00 38 08 d7 50 02 00 1d 10:54:57.686 RECALIBRATE [RET-4]
08 38 50 00 d7 57 96 1d a2 60 00 02 08 00:00:55.096 DEVICE RESET
Error 67 [18] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 04 61 57 8b 00 00 00 00 00 02 00 0a 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 08 08 00 ff 57 02 0a 8b 61 00 02 08 00:01:05.288 DEVICE RESET
0a 02 61 57 8b 00 08 08 ff 08 02 00 03 10:54:51.650 [RESERVED]
08 30 08 00 a7 57 02 03 8b 61 00 02 08 00:00:42.800 DEVICE RESET
Error 66 [17] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 40 61 57 73 00 00 00 00 00 02 00 0a 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 10 08 00 f7 57 40 0a 73 61 00 02 08 00:01:03.248 DEVICE RESET
0a 40 61 57 73 00 10 08 f7 08 02 00 03 10:54:45.568 [RESERVED]
08 30 08 00 a7 57 40 03 73 61 00 02 08 00:00:42.800 DEVICE RESET
Error 65 [16] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 e2 60 57 5a 00 00 00 00 00 02 00 1d 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 40 08 00 cf 57 e2 1d 5a 60 00 02 08 00:00:53.056 DEVICE RESET
1d e2 60 57 5a 00 40 08 cf 08 02 00 1d 10:54:39.330 RECALIBRATE [RET-4]
08 40 08 00 cf 57 e2 1d 5a 60 00 02 08 00:00:53.056 DEVICE RESET
Error 64 [15] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 38 61 57 43 00 00 00 00 00 02 00 0a 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 30 08 00 2f 57 32 13 43 61 00 02 08 00:01:05.344 DEVICE RESET
13 31 61 57 43 00 30 08 2f 08 02 00 13 10:54:33.266 RECALIBRATE [RET-4]
08 30 08 00 a7 57 31 13 43 61 00 02 08 00:00:42.800 DEVICE RESET
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 28/40 Celsius
Lifetime Min/Max Temperature: 28/44 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (13)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 317 Device-to-host register FISes sent due to a COMRESET
0x8000 4 1012611 Vendor specific