mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 1098, modified: 0)
This commit is contained in:
Andrey Ponomarenko
186
SSD/SK hynix/HFS256/HFS256G3AMNB-2200A/E124513FBF75
Normal file
186
SSD/SK hynix/HFS256/HFS256G3AMNB-2200A/E124513FBF75
Normal file
@@ -0,0 +1,186 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS256G3AMNB-2200A
|
||||
Serial Number: --
|
||||
Firmware Version: 10105L00
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Oct 21 11:53:31 2020 BST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 60) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x000f 166 166 006 Pre-fail Always - 0
|
||||
5 Reallocated_Sector_Ct 0x0032 253 253 036 Old_age Always - 0
|
||||
9 Power_On_Hours 0x0032 059 059 000 Old_age Always - 37011
|
||||
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 48
|
||||
100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3688015
|
||||
171 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
|
||||
172 Unknown_Attribute 0x0032 253 100 000 Old_age Always - 0
|
||||
174 Unknown_Attribute 0x0030 100 100 000 Old_age Offline - 15
|
||||
175 Program_Fail_Count_Chip 0x0032 253 253 000 Old_age Always - 0
|
||||
176 Erase_Fail_Count_Chip 0x0032 253 253 000 Old_age Always - 0
|
||||
177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 2654784
|
||||
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 33
|
||||
179 Used_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 48
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 5264
|
||||
181 Program_Fail_Cnt_Total 0x0032 253 253 000 Old_age Always - 0
|
||||
182 Erase_Fail_Count_Total 0x0032 253 100 000 Old_age Always - 0
|
||||
187 Reported_Uncorrect 0x0032 253 100 000 Old_age Always - 0
|
||||
194 Temperature_Celsius 0x0002 038 000 000 Old_age Always - 38 (Min/Max 16/54)
|
||||
195 Hardware_ECC_Recovered 0x0032 253 100 000 Old_age Always - 0
|
||||
201 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
|
||||
204 Soft_ECC_Correction 0x000e 095 095 000 Old_age Always - 28592
|
||||
231 Temperature_Celsius 0x0033 253 253 010 Pre-fail Always - 0
|
||||
234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 10597
|
||||
241 Total_LBAs_Written 0x0032 100 100 --- Old_age Always - 1668
|
||||
242 Total_LBAs_Read 0x0032 100 100 --- Old_age Always - 2925
|
||||
250 Read_Error_Retry_Rate 0x0032 100 100 --- Old_age Always - 80100
|
||||
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 2434 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 2434 occurred at disk power-on lifetime: 36972 hours (1540 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
00 00 00 00 00 00 00 at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 08 f0 c7 2c 40 40 18d+02:14:31.952 READ DMA EXT
|
||||
25 00 20 20 c5 2c 40 40 18d+02:14:31.952 READ DMA EXT
|
||||
25 00 20 80 4f 2c 40 40 18d+02:14:31.952 READ DMA EXT
|
||||
25 00 0c 20 6f 2d 40 40 18d+02:14:31.952 READ DMA EXT
|
||||
25 00 20 60 4f 2c 40 40 18d+02:14:31.952 READ DMA EXT
|
||||
|
||||
Error 2433 occurred at disk power-on lifetime: 36972 hours (1540 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
00 00 00 00 00 00 00 at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 08 f0 c7 2c 40 40 18d+02:14:31.952 READ DMA EXT
|
||||
25 00 20 20 c5 2c 40 40 18d+02:14:31.952 READ DMA EXT
|
||||
25 00 20 80 4f 2c 40 40 18d+02:14:31.952 READ DMA EXT
|
||||
25 00 0c 20 6f 2d 40 40 18d+02:14:31.952 READ DMA EXT
|
||||
25 00 20 60 4f 2c 40 40 18d+02:14:31.952 READ DMA EXT
|
||||
|
||||
Error 2432 occurred at disk power-on lifetime: 36972 hours (1540 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
04 51 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
b1 c1 00 00 00 00 00 00 18d+02:14:26.502 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
|
||||
f5 00 00 00 00 00 00 00 18d+02:14:26.502 SECURITY FREEZE LOCK
|
||||
ec 00 00 00 00 00 00 00 18d+02:14:21.342 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 18d+02:14:21.342 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 18d+02:14:21.312 IDENTIFY DEVICE
|
||||
|
||||
Error 2431 occurred at disk power-on lifetime: 36972 hours (1540 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
e7 08 98 80 c5 bd 00 00 18d+02:14:18.752 FLUSH CACHE
|
||||
61 04 90 10 04 00 40 40 18d+02:14:18.752 WRITE FPDMA QUEUED
|
||||
61 04 88 c0 1d 00 40 40 18d+02:14:18.752 WRITE FPDMA QUEUED
|
||||
61 04 80 10 04 00 40 40 18d+02:14:18.742 WRITE FPDMA QUEUED
|
||||
61 04 78 c0 1d 00 40 40 18d+02:14:18.742 WRITE FPDMA QUEUED
|
||||
|
||||
Error 2430 occurred at disk power-on lifetime: 36972 hours (1540 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
e7 08 98 80 c5 bd 00 00 18d+02:14:18.752 FLUSH CACHE
|
||||
61 04 90 10 04 00 40 40 18d+02:14:18.752 WRITE FPDMA QUEUED
|
||||
61 04 88 c0 1d 00 40 40 18d+02:14:18.752 WRITE FPDMA QUEUED
|
||||
61 04 80 10 04 00 40 40 18d+02:14:18.742 WRITE FPDMA QUEUED
|
||||
61 04 78 c0 1d 00 40 40 18d+02:14:18.742 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
Reference in New Issue
Block a user