mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 1098, modified: 0)
This commit is contained in:
89
SSD/WDC/WDBNCE5000/WDBNCE5000PNC/F2352F56D061
Normal file
89
SSD/WDC/WDBNCE5000/WDBNCE5000PNC/F2352F56D061
Normal file
@@ -0,0 +1,89 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: WDC WDBNCE5000PNC
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: 411030WD
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Oct 31 13:51:12 2020 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 4
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0
|
||||
9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 65534
|
||||
12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 417
|
||||
165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 18677989
|
||||
166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
|
||||
167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 37
|
||||
168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1
|
||||
169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 155
|
||||
170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
|
||||
171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
|
||||
172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
|
||||
173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
|
||||
174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 74
|
||||
184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
|
||||
187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
|
||||
188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0
|
||||
194 Temperature_Celsius 0x0022 063 043 --- Old_age Always - 37 (Min/Max 23/43)
|
||||
199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0
|
||||
230 Unknown_SSD_Attribute 0x0032 001 001 --- Old_age Always - 193273528365
|
||||
232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100
|
||||
233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 224
|
||||
234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 2364
|
||||
241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 2587
|
||||
242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 187
|
||||
244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
147
SSD/WDC/WDS100/WDS100T2B0A-00SM50/05DF5EC96C08
Normal file
147
SSD/WDC/WDS100/WDS100T2B0A-00SM50/05DF5EC96C08
Normal file
@@ -0,0 +1,147 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS100T2B0A-00SM50
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: 401020WD
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Sep 24 23:50:53 2020 CDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 4
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0
|
||||
9 Power_On_Hours -O--CK 100 100 --- - 252
|
||||
12 Power_Cycle_Count -O--CK 100 100 --- - 238
|
||||
165 Block_Erase_Count -O--CK 100 100 --- - 327682
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 0
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 60
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 1
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 849
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 --- - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 --- - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 0
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 --- - 12
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 --- - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 072 035 --- - 28 (Min/Max 21/35)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 001 001 --- - 0x000000000000
|
||||
232 Available_Reservd_Space PO--CK 100 100 004 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 26
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 --- - 68
|
||||
241 Host_Writes_GiB ----CK 253 253 --- - 78
|
||||
242 Host_Reads_GiB ----CK 253 253 --- - 23
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x24 GPL R/O 2277 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 2277 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 238 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 252 --- Power-on Hours
|
||||
0x01 0x018 6 164024517 --- Logical Sectors Written
|
||||
0x01 0x020 6 2606421 --- Number of Write Commands
|
||||
0x01 0x028 6 50304397 --- Logical Sectors Read
|
||||
0x01 0x030 6 34360486092 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
|
||||
|
144
SSD/WDC/WDS120/WDS120G1G0A-00SS50/9D0A409F744C
Normal file
144
SSD/WDC/WDS120/WDS120G1G0A-00SS50/9D0A409F744C
Normal file
@@ -0,0 +1,144 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE-p2 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS120G1G0A-00SS50
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: Z3311000
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Oct 4 21:39:55 2020 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 000 100 000 - 29276
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 83
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 2048795018570
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 000 - 1
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 000 - 0
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 000 - 24
|
||||
169 Total_Bad_Blocks -O--CK 100 100 000 - 0
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 000 - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 10
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 27
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---K 049 032 000 - 51 (Min/Max 0/68)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x01c3009d01c3
|
||||
232 Available_Reservd_Space PO--CK 100 100 004 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 000 - 1310
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 6349
|
||||
241 Host_Writes_GiB ----CK 253 253 000 - 4551
|
||||
242 Host_Reads_GiB ----CK 253 253 000 - 1525
|
||||
244 Temp_Throttle_Status -O--CK 000 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 83 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 29276 --- Power-on Hours
|
||||
0x01 0x018 6 954538179 --- Logical Sectors Written
|
||||
0x01 0x020 6 131751835 --- Number of Write Commands
|
||||
0x01 0x028 6 3199585377 --- Logical Sectors Read
|
||||
0x01 0x030 6 26660080 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
|
||||
|
142
SSD/WDC/WDS120/WDS120G1G0B-00RC30/5FF93853A772
Normal file
142
SSD/WDC/WDS120/WDS120G1G0B-00RC30/5FF93853A772
Normal file
@@ -0,0 +1,142 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS120G1G0B-00RC30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: Z3311000
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Aug 14 06:50:29 2020 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 000 100 000 - 909
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 1447
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 81660543689
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 000 - 1
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 000 - 0
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 000 - 41
|
||||
169 Total_Bad_Blocks -O--CK 100 100 000 - 0
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 000 - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 17
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 26
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---K 059 049 000 - 41 (Min/Max 0/51)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x00ed00fe00fe
|
||||
232 Available_Reservd_Space PO--CK 100 100 004 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 000 - 2110
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 3306
|
||||
241 Host_Writes_GiB ----CK 253 253 000 - 1026
|
||||
242 Host_Reads_GiB ----CK 253 253 000 - 341
|
||||
244 Temp_Throttle_Status -O--CK 000 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 1447 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 909 --- Power-on Hours
|
||||
0x01 0x018 6 2151853024 --- Logical Sectors Written
|
||||
0x01 0x020 6 12152760 --- Number of Write Commands
|
||||
0x01 0x028 6 716803744 --- Logical Sectors Read
|
||||
0x01 0x030 6 9040930 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
165
SSD/WDC/WDS120/WDS120G2G0A-00JH30/A700D44C1D5D
Normal file
165
SSD/WDC/WDS120/WDS120G2G0A-00JH30/A700D44C1D5D
Normal file
@@ -0,0 +1,165 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS120G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UE450000
|
||||
User Capacity: 120,040,980,480 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
|
||||
Local Time is: Sun Aug 2 00:22:56 2020 NZST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 32) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x15) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 21) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 1981
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 352
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 223
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 4
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 15
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 51
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 4
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 22
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 070 038 000 - 30 (Min/Max 3/38)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x003f0050003f
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 492
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 1245
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 455
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 247
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 3 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 352 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1981 --- Power-on Hours
|
||||
0x01 0x018 6 955731405 --- Logical Sectors Written
|
||||
0x01 0x028 6 518272016 --- Logical Sectors Read
|
||||
0x01 0x038 6 1981 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 30 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 37 --- Highest Temperature
|
||||
0x05 0x028 1 15 --- Lowest Temperature
|
||||
0x05 0x030 1 32 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 32 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 64 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 65 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
167
SSD/WDC/WDS120/WDS120G2G0B-00EPW0/F50CC136B652
Normal file
167
SSD/WDC/WDS120/WDS120G2G0B-00EPW0/F50CC136B652
Normal file
@@ -0,0 +1,167 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS120G2G0B-00EPW0
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UI450000
|
||||
User Capacity: 120,040,980,480 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Sep 17 14:52:06 2020 AST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 32) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x15) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 21) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 626
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 675
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 193
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 3
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 8
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 67
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 3
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 56
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 059 051 000 - 41 (Min/Max 14/51)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x0037003c0037
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 277
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 1079
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 459
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 296
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 3 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 675 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 626 --- Power-on Hours
|
||||
0x01 0x018 6 964177579 --- Logical Sectors Written
|
||||
0x01 0x028 6 621412455 --- Logical Sectors Read
|
||||
0x01 0x038 6 626 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 41 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 50 --- Highest Temperature
|
||||
0x05 0x028 1 34 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 - --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
||||
|
||||
|
166
SSD/WDC/WDS240/WDS240G2G0A-00JH30/1662CD83859A
Normal file
166
SSD/WDC/WDS240/WDS240G2G0A-00JH30/1662CD83859A
Normal file
@@ -0,0 +1,166 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS240G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UF400400
|
||||
User Capacity: 240,057,409,536 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Fri Oct 30 00:23:17 2020 KST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 41) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 35
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 46
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 21
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 0
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 20
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 2
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 95
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 0
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 6
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 069 045 000 - 31 (Min/Max 18/45)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x000600000006
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 46
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 168
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 71
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 17
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3-0xa4 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 4 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 46 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 35 --- Power-on Hours
|
||||
0x01 0x018 6 149665359 --- Logical Sectors Written
|
||||
0x01 0x028 6 36917035 --- Logical Sectors Read
|
||||
0x01 0x038 6 35 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 31 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 45 --- Highest Temperature
|
||||
0x05 0x028 1 32 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 - --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
168
SSD/WDC/WDS240/WDS240G2G0A-00JH30/16AFA3811E7F
Normal file
168
SSD/WDC/WDS240/WDS240G2G0A-00JH30/16AFA3811E7F
Normal file
@@ -0,0 +1,168 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS240G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UF430400
|
||||
User Capacity: 240,057,409,536 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Oct 29 15:44:57 2020 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 41) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 1251
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 5
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 356
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 58
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 3
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 229
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 1
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 1
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 057 063 000 - 43 (Min/Max 17/63)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x010100140101
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 59
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 2842
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 1153
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 588
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3-0xa4 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 4 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 5 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1251 --- Power-on Hours
|
||||
0x01 0x018 6 2419693056 --- Logical Sectors Written
|
||||
0x01 0x028 6 1234373853 --- Logical Sectors Read
|
||||
0x01 0x038 6 1251 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 43 --- Current Temperature
|
||||
0x05 0x010 1 42 --- Average Short Term Temperature
|
||||
0x05 0x018 1 43 --- Average Long Term Temperature
|
||||
0x05 0x020 1 63 --- Highest Temperature
|
||||
0x05 0x028 1 35 --- Lowest Temperature
|
||||
0x05 0x030 1 45 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 45 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 44 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 44 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
||||
|
||||
|
174
SSD/WDC/WDS240/WDS240G2G0A-00JH30/1BE00C2482B7
Normal file
174
SSD/WDC/WDS240/WDS240G2G0A-00JH30/1BE00C2482B7
Normal file
@@ -0,0 +1,174 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS240G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UF450000
|
||||
User Capacity: 240,065,183,744 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Jul 6 14:38:35 2020 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 32) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x15) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 42) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 1350
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 2259
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 697
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 7
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 16
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 186
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 7
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 272
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 062 048 000 - 38 (Min/Max 0/48)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x016301280163
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 1585
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 5321
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 2244
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 2795
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 3 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 621 -
|
||||
# 2 Extended offline Completed without error 00% 616 -
|
||||
# 3 Short offline Completed without error 00% 614 -
|
||||
# 4 Extended offline Completed without error 00% 330 -
|
||||
# 5 Short offline Aborted by host 40% 291 -
|
||||
# 6 Short offline Completed without error 00% 266 -
|
||||
# 7 Short offline Completed without error 00% 266 -
|
||||
# 8 Short offline Aborted by host 90% 262 -
|
||||
# 9 Short offline Completed without error 00% 15 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 2259 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1350 --- Power-on Hours
|
||||
0x01 0x018 6 4707870759 --- Logical Sectors Written
|
||||
0x01 0x028 6 5862865578 --- Logical Sectors Read
|
||||
0x01 0x038 6 1352 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 38 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 46 --- Highest Temperature
|
||||
0x05 0x028 1 15 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 - --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
167
SSD/WDC/WDS240/WDS240G2G0A-00JH30/300FCCA363E1
Normal file
167
SSD/WDC/WDS240/WDS240G2G0A-00JH30/300FCCA363E1
Normal file
@@ -0,0 +1,167 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS240G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UF510000
|
||||
User Capacity: 240,065,183,744 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Oct 29 15:44:57 2020 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 32) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x15) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 42) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 1251
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 5
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 408
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 0
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 2
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 662
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 0
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 1
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 063 051 000 - 37 (Min/Max 13/51)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x011000000110
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 53
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 3110
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 1128
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 593
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 3 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 5 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1251 --- Power-on Hours
|
||||
0x01 0x018 6 2367650176 --- Logical Sectors Written
|
||||
0x01 0x028 6 1244387988 --- Logical Sectors Read
|
||||
0x01 0x038 6 1251 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 37 --- Current Temperature
|
||||
0x05 0x010 1 37 --- Average Short Term Temperature
|
||||
0x05 0x018 1 38 --- Average Long Term Temperature
|
||||
0x05 0x020 1 50 --- Highest Temperature
|
||||
0x05 0x028 1 31 --- Lowest Temperature
|
||||
0x05 0x030 1 38 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 38 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 38 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 38 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
||||
|
||||
|
91
SSD/WDC/WDS240/WDS240G2G0A-00JH30/3C0A22C1C5FC
Normal file
91
SSD/WDC/WDS240/WDS240G2G0A-00JH30/3C0A22C1C5FC
Normal file
@@ -0,0 +1,91 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS240G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UF500000
|
||||
User Capacity: 240,065,183,744 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Aug 30 11:10:07 2020 MSK
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 32) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x15) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 42) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
|
||||
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 214
|
||||
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 113
|
||||
165 Block_Erase_Count 0x0032 100 100 000 Old_age Always - 101
|
||||
166 Minimum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 1
|
||||
167 Max_Bad_Blocks_per_Die 0x0032 100 100 --- Old_age Always - 0
|
||||
168 Maximum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 3
|
||||
169 Total_Bad_Blocks 0x0032 100 100 --- Old_age Always - 455
|
||||
170 Grown_Bad_Blocks 0x0032 100 100 --- Old_age Always - 0
|
||||
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
173 Average_PE_Cycles_TLC 0x0032 100 100 000 Old_age Always - 1
|
||||
174 Unexpected_Power_Loss 0x0032 100 100 000 Old_age Always - 13
|
||||
184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
|
||||
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
||||
188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0
|
||||
194 Temperature_Celsius 0x0022 059 053 000 Old_age Always - 41 (Min/Max 16/53)
|
||||
199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0
|
||||
230 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0x001c0014001c
|
||||
232 Available_Reservd_Space 0x0033 100 100 005 Pre-fail Always - 100
|
||||
233 NAND_GB_Written_TLC 0x0032 100 100 --- Old_age Always - 73
|
||||
234 NAND_GB_Written_SLC 0x0032 100 100 000 Old_age Always - 775
|
||||
241 Host_Writes_GiB 0x0030 100 100 000 Old_age Offline - 355
|
||||
242 Host_Reads_GiB 0x0030 100 100 000 Old_age Offline - 61
|
||||
244 Temp_Throttle_Status 0x0032 000 100 --- Old_age Always - 0
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
|
||||
|
168
SSD/WDC/WDS240/WDS240G2G0A-00JH30/5820F94C4D11
Normal file
168
SSD/WDC/WDS240/WDS240G2G0A-00JH30/5820F94C4D11
Normal file
@@ -0,0 +1,168 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS240G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UF430400
|
||||
User Capacity: 240,057,409,536 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Oct 29 15:44:57 2020 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 41) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 1251
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 5
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 356
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 81
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 2
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 473
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 1
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 1
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 059 061 000 - 41 (Min/Max 17/61)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x010100140101
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 58
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 2842
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 1153
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 588
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3-0xa4 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 4 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 5 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1251 --- Power-on Hours
|
||||
0x01 0x018 6 2419692288 --- Logical Sectors Written
|
||||
0x01 0x028 6 1235212711 --- Logical Sectors Read
|
||||
0x01 0x038 6 1251 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 41 --- Current Temperature
|
||||
0x05 0x010 1 40 --- Average Short Term Temperature
|
||||
0x05 0x018 1 41 --- Average Long Term Temperature
|
||||
0x05 0x020 1 60 --- Highest Temperature
|
||||
0x05 0x028 1 33 --- Lowest Temperature
|
||||
0x05 0x030 1 42 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 42 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 41 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 41 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
||||
|
||||
|
166
SSD/WDC/WDS240/WDS240G2G0A-00JH30/EE40B61EE899
Normal file
166
SSD/WDC/WDS240/WDS240G2G0A-00JH30/EE40B61EE899
Normal file
@@ -0,0 +1,166 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS240G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UF430400
|
||||
User Capacity: 240,057,409,536 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Oct 29 15:44:57 2020 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 41) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 1251
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 5
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 348
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 48
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 3
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 224
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 1
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 1
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 062 059 000 - 38 (Min/Max 12/59)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x006300140063
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 57
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 2777
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 1128
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 591
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3-0xa4 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 4 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 5 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1251 --- Power-on Hours
|
||||
0x01 0x018 6 2367650176 --- Logical Sectors Written
|
||||
0x01 0x028 6 1240362141 --- Logical Sectors Read
|
||||
0x01 0x038 6 1251 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 38 --- Current Temperature
|
||||
0x05 0x010 1 37 --- Average Short Term Temperature
|
||||
0x05 0x018 1 38 --- Average Long Term Temperature
|
||||
0x05 0x020 1 58 --- Highest Temperature
|
||||
0x05 0x028 1 30 --- Lowest Temperature
|
||||
0x05 0x030 1 39 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 39 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 38 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 38 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
172
SSD/WDC/WDS240/WDS240G2G0A-00JH30/F2688EE3689A
Normal file
172
SSD/WDC/WDS240/WDS240G2G0A-00JH30/F2688EE3689A
Normal file
@@ -0,0 +1,172 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS240G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UF220400
|
||||
User Capacity: 240,057,409,536 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Sun Sep 13 13:48:21 2020 HKT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 41) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 1
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 2110
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 521
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 270
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 3
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 12
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 9
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 117
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 1
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 3
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 8
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 060 051 000 - 40 (Min/Max 13/51)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x004d003c004d
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 763
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 2157
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 928
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 761
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3-0xa4 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 4 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 33 -
|
||||
# 2 Short offline Completed without error 00% 32 -
|
||||
# 3 Short offline Completed without error 00% 16 -
|
||||
# 4 Short offline Completed without error 00% 5 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 521 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 2110 --- Power-on Hours
|
||||
0x01 0x018 6 1947616806 --- Logical Sectors Written
|
||||
0x01 0x028 6 1596429156 --- Logical Sectors Read
|
||||
0x01 0x038 6 2111 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 40 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 51 --- Highest Temperature
|
||||
0x05 0x028 1 21 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 - --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 44 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 45 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
||||
|
||||
|
184
SSD/WDC/WDS240/WDS240G2G0B-00EPW0/4A63FE07F552
Normal file
184
SSD/WDC/WDS240/WDS240G2G0B-00EPW0/4A63FE07F552
Normal file
@@ -0,0 +1,184 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue / Red / Green SSDs
|
||||
Device Model: WDC WDS240G2G0B-00EPW0
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UJ450000
|
||||
User Capacity: 240,065,183,744 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Oct 21 23:37:16 2020 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 32) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x15) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 42) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 7032
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 776
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 1659
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 22
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 28
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 242
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 22
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 28
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 074 043 000 - 26 (Min/Max 5/43)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x044a0428044a
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 5441
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 12650
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 5946
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 7114
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 3 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 6985 -
|
||||
# 2 Short offline Completed without error 00% 6949 -
|
||||
# 3 Short offline Completed without error 00% 6938 -
|
||||
# 4 Short offline Completed without error 00% 6903 -
|
||||
# 5 Short offline Completed without error 00% 6891 -
|
||||
# 6 Short offline Completed without error 00% 6877 -
|
||||
# 7 Short offline Completed without error 00% 6869 -
|
||||
# 8 Short offline Completed without error 00% 4592 -
|
||||
# 9 Short offline Completed without error 00% 4584 -
|
||||
#10 Short offline Completed without error 00% 4575 -
|
||||
#11 Short offline Completed without error 00% 4567 -
|
||||
#12 Short offline Completed without error 00% 4564 -
|
||||
#13 Short offline Completed without error 00% 4562 -
|
||||
#14 Extended offline Self-test routine in progress 60% 4562 -
|
||||
#15 Short offline Completed without error 00% 4554 -
|
||||
#16 Short offline Completed without error 00% 4547 -
|
||||
#17 Short offline Completed without error 00% 4540 -
|
||||
#18 Short offline Completed without error 00% 4533 -
|
||||
#19 Short offline Completed without error 00% 4520 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 776 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 7032 --- Power-on Hours
|
||||
0x01 0x018 6 12470074517 --- Logical Sectors Written
|
||||
0x01 0x028 6 14920868632 --- Logical Sectors Read
|
||||
0x01 0x038 6 7032 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 26 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 43 --- Highest Temperature
|
||||
0x05 0x028 1 21 --- Lowest Temperature
|
||||
0x05 0x030 1 27 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 27 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 4 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 43 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 44 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
166
SSD/WDC/WDS240/WDS240G2G0B-00EPW0/BF2E013147A1
Normal file
166
SSD/WDC/WDS240/WDS240G2G0B-00EPW0/BF2E013147A1
Normal file
@@ -0,0 +1,166 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT arm64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS240G2G0B-00EPW0
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UJ430400
|
||||
User Capacity: 240,057,409,536 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Oct 29 14:14:10 2020 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 41) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 1063
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 99
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 53
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 74
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 2
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 358
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 1
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 42
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 062 041 000 - 38 (Min/Max 19/41)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x000f0014000f
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 102
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 421
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 128
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 49
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3-0xa4 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 4 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 99 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1063 --- Power-on Hours
|
||||
0x01 0x018 6 270298671 --- Logical Sectors Written
|
||||
0x01 0x028 6 103535697 --- Logical Sectors Read
|
||||
0x01 0x038 6 1063 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 38 --- Current Temperature
|
||||
0x05 0x010 1 34 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 41 --- Highest Temperature
|
||||
0x05 0x028 1 28 --- Lowest Temperature
|
||||
0x05 0x030 1 37 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 37 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
162
SSD/WDC/WDS250/WDS250G1B0A-00H9H0/A46BACCC9021
Normal file
162
SSD/WDC/WDS250/WDS250G1B0A-00H9H0/A46BACCC9021
Normal file
@@ -0,0 +1,162 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS250G1B0A-00H9H0
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: X41110WD
|
||||
User Capacity: 250,059,350,016 bytes [250 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
|
||||
Local Time is: Mon Sep 14 22:14:07 2020 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 4
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0
|
||||
9 Power_On_Hours -O--CK 100 100 --- - 15629
|
||||
12 Power_Cycle_Count -O--CK 100 100 --- - 656
|
||||
165 Block_Erase_Count -O--CK 100 100 --- - 11327251430516
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 193
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 66
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 421
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 323
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 --- - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 --- - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 274
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 --- - 20
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 --- - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 1
|
||||
194 Temperature_Celsius -O---K 059 051 --- - 41 (Min/Max 9/51)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 63
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 --- - 0x2c15270e2c15
|
||||
232 Available_Reservd_Space PO--CK 100 100 004 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 65711
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 --- - 112702
|
||||
241 Host_Writes_GiB ----CK 253 253 --- - 45522
|
||||
242 Host_Reads_GiB ----CK 253 253 --- - 7684
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 12876 -
|
||||
# 2 Extended offline Completed without error 00% 12708 -
|
||||
# 3 Extended offline Completed without error 00% 12540 -
|
||||
# 4 Extended offline Completed without error 00% 12372 -
|
||||
# 5 Extended offline Completed without error 00% 12204 -
|
||||
# 6 Extended offline Completed without error 00% 12036 -
|
||||
# 7 Extended offline Completed without error 00% 11868 -
|
||||
# 8 Extended offline Completed without error 00% 11700 -
|
||||
# 9 Extended offline Completed without error 00% 11532 -
|
||||
#10 Extended offline Completed without error 00% 11364 -
|
||||
#11 Extended offline Completed without error 00% 11196 -
|
||||
#12 Extended offline Completed without error 00% 11028 -
|
||||
#13 Extended offline Completed without error 00% 10860 -
|
||||
#14 Extended offline Completed without error 00% 10692 -
|
||||
#15 Extended offline Completed without error 00% 10524 -
|
||||
#16 Extended offline Completed without error 00% 10356 -
|
||||
#17 Extended offline Completed without error 00% 10188 -
|
||||
#18 Extended offline Completed without error 00% 10020 -
|
||||
#19 Extended offline Completed without error 00% 9853 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 656 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 10379 --- Power-on Hours
|
||||
0x01 0x018 6 95467220201 --- Logical Sectors Written
|
||||
0x01 0x020 6 2186775053 --- Number of Write Commands
|
||||
0x01 0x028 6 16115056860 --- Logical Sectors Read
|
||||
0x01 0x030 6 1715370834 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 39 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 3 Command failed due to ICRC error
|
||||
0x0002 4 3 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 16 Device-to-host register FISes sent due to a COMRESET
|
||||
|
168
SSD/WDC/WDS480/WDS480G2G0A-00JH30/66C774DFDC19
Normal file
168
SSD/WDC/WDS480/WDS480G2G0A-00JH30/66C774DFDC19
Normal file
@@ -0,0 +1,168 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS480G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UG220400
|
||||
User Capacity: 480,103,981,056 bytes [480 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jun 27 20:39:09 2020 -03
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 83) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 601
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 466
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 481
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 5
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 38
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 7
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 418
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 5
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 26
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 071 051 000 - 29 (Min/Max 9/51)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x012501000125
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 2556
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 5957
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 2685
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 1255
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3-0xa4 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 4 Device vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 466 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 601 --- Power-on Hours
|
||||
0x01 0x018 6 5632245765 --- Logical Sectors Written
|
||||
0x01 0x028 6 2633266204 --- Logical Sectors Read
|
||||
0x01 0x038 6 601 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 29 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 50 --- Highest Temperature
|
||||
0x05 0x028 1 15 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 - --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
||||
|
||||
|
317
SSD/WDC/WDS480/WDS480G2G0A-00JH30/6E4098FF7BB8
Normal file
317
SSD/WDC/WDS480/WDS480G2G0A-00JH30/6E4098FF7BB8
Normal file
@@ -0,0 +1,317 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS480G2G0A-00JH30
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: UG220400
|
||||
User Capacity: 480,103,981,056 bytes [480 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jun 27 20:39:09 2020 -03
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 83) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 634
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 466
|
||||
165 Block_Erase_Count -O--CK 100 100 000 - 400
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 4
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 20
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 6
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 264
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 4
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 000 - 26
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 068 053 000 - 32 (Min/Max 13/53)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x010e0050010e
|
||||
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 2020
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 4955
|
||||
241 Host_Writes_GiB ----CK 100 100 000 - 2159
|
||||
242 Host_Reads_GiB ----CK 100 100 000 - 841
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 2 Device vendor specific log
|
||||
0xa3-0xa4 GPL,SL VS 1 Device vendor specific log
|
||||
0xa7 GPL,SL VS 1 Device vendor specific log
|
||||
0xa9 GPL,SL VS 4 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
||||
Device Error Count: 105 (device log contains only the most recent 64 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 105 [0] occurred at disk power-on lifetime: 43981 hours (1832 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 15 16d+13:40:55.765 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 14 13d+06:08:44.612 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 13 9d+22:36:33.459 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 12 6d+15:04:22.306 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 11 3d+07:32:11.153 NOP [Abort queued commands]
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
Error 104 [63] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 45 16d+13:40:55.765 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 44 13d+06:08:44.612 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 43 9d+22:36:33.459 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 42 6d+15:04:22.306 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 41 3d+07:32:11.153 NOP [Abort queued commands]
|
||||
|
||||
Error 103 [62] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 35 16d+13:40:55.765 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 34 13d+06:08:44.612 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 33 9d+22:36:33.459 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 32 6d+15:04:22.306 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 31 3d+07:32:11.153 NOP [Abort queued commands]
|
||||
|
||||
Error 102 [61] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 25 16d+13:40:55.765 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 24 13d+06:08:44.612 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 23 9d+22:36:33.459 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 22 6d+15:04:22.306 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 21 3d+07:32:11.153 NOP [Abort queued commands]
|
||||
|
||||
Error 101 [60] occurred at disk power-on lifetime: 43981 hours (1832 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 15 16d+13:40:55.765 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 14 13d+06:08:44.612 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 13 9d+22:36:33.459 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 12 6d+15:04:22.306 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 11 3d+07:32:11.153 NOP [Abort queued commands]
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
Error 100 [59] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 45 16d+13:40:55.765 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 44 13d+06:08:44.612 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 43 9d+22:36:33.459 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 42 6d+15:04:22.306 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 41 3d+07:32:11.153 NOP [Abort queued commands]
|
||||
|
||||
Error 99 [58] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 35 16d+13:40:55.765 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 34 13d+06:08:44.612 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 33 9d+22:36:33.459 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 32 6d+15:04:22.306 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 31 3d+07:32:11.153 NOP [Abort queued commands]
|
||||
|
||||
Error 98 [57] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 25 16d+13:40:55.765 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 24 13d+06:08:44.612 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 23 9d+22:36:33.459 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 22 6d+15:04:22.306 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 21 3d+07:32:11.153 NOP [Abort queued commands]
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 466 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 634 --- Power-on Hours
|
||||
0x01 0x018 6 4528030992 --- Logical Sectors Written
|
||||
0x01 0x028 6 1764519423 --- Logical Sectors Read
|
||||
0x01 0x038 6 634 --- Date and Time TimeStamp
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 32 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 52 --- Highest Temperature
|
||||
0x05 0x028 1 16 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 - --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
|
88
SSD/WDC/WDS500/WDS500G2B0A-00SM50/1CC6CB6F8CD3
Normal file
88
SSD/WDC/WDS500/WDS500G2B0A-00SM50/1CC6CB6F8CD3
Normal file
@@ -0,0 +1,88 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS500G2B0A-00SM50
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: 401020WD
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Tue Oct 20 07:16:22 2020 NZDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 4
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0
|
||||
9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 5373
|
||||
12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 39
|
||||
165 Block_Erase_Count 0x0032 100 100 --- Old_age Always - 12910710
|
||||
166 Minimum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 0
|
||||
167 Max_Bad_Blocks_per_Die 0x0032 100 100 --- Old_age Always - 71
|
||||
168 Maximum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 1
|
||||
169 Total_Bad_Blocks 0x0032 100 100 --- Old_age Always - 403
|
||||
170 Grown_Bad_Blocks 0x0032 100 100 --- Old_age Always - 0
|
||||
171 Program_Fail_Count 0x0032 100 100 --- Old_age Always - 0
|
||||
172 Erase_Fail_Count 0x0032 100 100 --- Old_age Always - 0
|
||||
173 Average_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 0
|
||||
174 Unexpected_Power_Loss 0x0032 100 100 --- Old_age Always - 14
|
||||
184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
|
||||
187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
|
||||
188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0
|
||||
194 Temperature_Celsius 0x0022 069 044 --- Old_age Always - 31 (Min/Max 24/44)
|
||||
199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0
|
||||
230 Media_Wearout_Indicator 0x0032 001 001 --- Old_age Always - 0x001700000017
|
||||
232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100
|
||||
233 NAND_GB_Written_TLC 0x0032 100 100 --- Old_age Always - 117
|
||||
234 NAND_GB_Written_SLC 0x0032 100 100 --- Old_age Always - 1415
|
||||
241 Host_Writes_GiB 0x0030 253 253 --- Old_age Offline - 1373
|
||||
242 Host_Reads_GiB 0x0030 253 253 --- Old_age Offline - 97
|
||||
244 Temp_Throttle_Status 0x0032 000 100 --- Old_age Always - 0
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
145
SSD/WDC/WDS500/WDS500G2B0A/282A1B488010
Normal file
145
SSD/WDC/WDS500/WDS500G2B0A/282A1B488010
Normal file
@@ -0,0 +1,145 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS500G2B0A
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: X61190WD
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Jul 21 03:11:52 2020 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 4
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0
|
||||
9 Power_On_Hours -O--CK 100 100 --- - 5635
|
||||
12 Power_Cycle_Count -O--CK 100 100 --- - 608
|
||||
165 Block_Erase_Count -O--CK 100 100 --- - 17190224001
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 49
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 7
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 369
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 --- - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 --- - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 2
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 --- - 61
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 --- - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 072 039 --- - 28 (Min/Max 17/39)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 --- - 0x001900140019
|
||||
232 Available_Reservd_Space PO--CK 100 100 004 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 1087
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 --- - 1578
|
||||
241 Host_Writes_GiB ----CK 253 253 --- - 1433
|
||||
242 Host_Reads_GiB ----CK 253 253 --- - 463
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 608 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 0 --- Power-on Hours
|
||||
0x01 0x018 6 3006246110 --- Logical Sectors Written
|
||||
0x01 0x020 6 29658745 --- Number of Write Commands
|
||||
0x01 0x028 6 971995242 --- Logical Sectors Read
|
||||
0x01 0x030 6 36946003 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 5 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
|
||||
|
145
SSD/WDC/WDS500/WDS500G2B0A/EF5676FEAA52
Normal file
145
SSD/WDC/WDS500/WDS500G2B0A/EF5676FEAA52
Normal file
@@ -0,0 +1,145 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: WD Blue and Green SSDs
|
||||
Device Model: WDC WDS500G2B0A
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 001b44 ...
|
||||
Firmware Version: X61190WD
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Jul 27 17:18:59 2020 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 4
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0
|
||||
9 Power_On_Hours -O--CK 100 100 --- - 368
|
||||
12 Power_Cycle_Count -O--CK 100 100 --- - 32
|
||||
165 Block_Erase_Count -O--CK 100 100 --- - 983049
|
||||
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 0
|
||||
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 38
|
||||
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 1
|
||||
169 Total_Bad_Blocks -O--CK 100 100 --- - 421
|
||||
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
||||
171 Program_Fail_Count -O--CK 100 100 --- - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 --- - 0
|
||||
173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 0
|
||||
174 Unexpected_Power_Loss -O--CK 100 100 --- - 3
|
||||
184 End-to-End_Error -O--CK 100 100 --- - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 --- - 0
|
||||
188 Command_Timeout -O--CK 100 100 --- - 0
|
||||
194 Temperature_Celsius -O---K 071 031 --- - 29 (Min/Max 23/31)
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
||||
230 Media_Wearout_Indicator -O--CK 100 100 --- - 0x000100000001
|
||||
232 Available_Reservd_Space PO--CK 100 100 004 - 100
|
||||
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 33
|
||||
234 NAND_GB_Written_SLC -O--CK 100 100 --- - 117
|
||||
241 Host_Writes_GiB ----CK 253 253 --- - 156
|
||||
242 Host_Reads_GiB ----CK 253 253 --- - 33
|
||||
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 32 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 0 --- Power-on Hours
|
||||
0x01 0x018 6 327473767 --- Logical Sectors Written
|
||||
0x01 0x020 6 9129260 --- Number of Write Commands
|
||||
0x01 0x028 6 70044783 --- Logical Sectors Read
|
||||
0x01 0x030 6 8455450 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
|
||||
|
Reference in New Issue
Block a user