mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 14, modified: 3797)
This commit is contained in:
@@ -14,7 +14,7 @@ Form Factor: 3.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Dec 4 03:07:22 2020 GMT
|
||||
Local Time is: Fri Dec 4 19:57:24 2020 GMT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
@@ -66,17 +66,17 @@ SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
||||
3 Spin_Up_Time POS--K 178 173 021 - 2066
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 68
|
||||
3 Spin_Up_Time POS--K 180 173 021 - 1958
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 76
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 076 076 000 - 17625
|
||||
9 Power_On_Hours -O--CK 076 076 000 - 17626
|
||||
10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 68
|
||||
16 Unknown_Attribute -O---K 000 200 000 - 2261829383
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 76
|
||||
16 Unknown_Attribute -O---K 000 200 000 - 2382563544
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 52
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 60
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 15
|
||||
194 Temperature_Celsius -O---K 115 101 000 - 28
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
@@ -148,8 +148,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (65535)
|
||||
Invalid Temperature History Size or Index
|
||||
Temperature History Size (Index): 478 (40)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 70 (7.0 seconds)
|
||||
@@ -158,17 +157,17 @@ SCT Error Recovery Control:
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 68 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 17625 --- Power-on Hours
|
||||
0x01 0x018 6 1498760363 --- Logical Sectors Written
|
||||
0x01 0x020 6 5521902 --- Number of Write Commands
|
||||
0x01 0x028 6 763147006 --- Logical Sectors Read
|
||||
0x01 0x030 6 8398309 --- Number of Read Commands
|
||||
0x01 0x048 2 12 N-- Workload Utilization
|
||||
0x01 0x008 4 76 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 17626 --- Power-on Hours
|
||||
0x01 0x018 6 1498761967 --- Logical Sectors Written
|
||||
0x01 0x020 6 5521927 --- Number of Write Commands
|
||||
0x01 0x028 6 883801595 --- Logical Sectors Read
|
||||
0x01 0x030 6 8875625 --- Number of Read Commands
|
||||
0x01 0x048 2 13 N-- Workload Utilization
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 40281 --- Spindle Motor Power-on Hours
|
||||
0x03 0x008 4 40282 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 40281 --- Head Flying Hours
|
||||
0x03 0x018 4 68 --- Head Load Events
|
||||
0x03 0x018 4 76 --- Head Load Events
|
||||
0x03 0x020 4 200 N-- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
@@ -190,8 +189,8 @@ Page Offset Size Value Flags Description
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 434 --- Number of Hardware Resets
|
||||
0x06 0x010 4 7774787 --- Number of ASR Events
|
||||
0x06 0x008 4 475 --- Number of Hardware Resets
|
||||
0x06 0x010 4 7777146 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
@@ -209,12 +208,12 @@ ID Size Value Description
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 12 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 9 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x8000 4 4845 Vendor specific
|
||||
0x8000 4 951 Vendor specific
|
||||
|
||||
|
||||
|
||||
|
@@ -12,7 +12,7 @@ Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Fri Aug 21 12:57:56 2020 MSK
|
||||
Local Time is: Fri Aug 21 13:16:17 2020 MSK
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
@@ -73,7 +73,7 @@ ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
12 Power_Cycle_Count -O--CK 094 094 000 - 6217
|
||||
192 Power-Off_Retract_Count -O--CK 197 197 000 - 2954
|
||||
193 Load_Cycle_Count -O--CK 199 199 000 - 3269
|
||||
194 Temperature_Celsius -O---K 114 095 000 - 33
|
||||
194 Temperature_Celsius -O---K 107 095 000 - 40
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
@@ -247,9 +247,9 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 23/33 Celsius
|
||||
Lifetime Min/Max Temperature: 0/52 Celsius
|
||||
Current Temperature: 40 Celsius
|
||||
Power Cycle Min/Max Temperature: 23/40 Celsius
|
||||
Lifetime Min/Max Temperature: 23/52 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
@@ -257,7 +257,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (329)
|
||||
Temperature History Size (Index): 478 (347)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
@@ -276,7 +276,7 @@ ID Size Value Description
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x8000 4 965 Vendor specific
|
||||
0x8000 4 2065 Vendor specific
|
||||
|
||||
|
||||
|
||||
|
@@ -1,5 +1,5 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital Caviar Black
|
||||
@@ -9,10 +9,10 @@ LU WWN Device Id: 5 0014ee ...
|
||||
Firmware Version: 05.01D05
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 6.0 Gb/s
|
||||
Local Time is: Sun Oct 3 10:45:23 2021 EDT
|
||||
Local Time is: Mon Jan 23 10:30:02 2023 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
@@ -62,18 +62,18 @@ SCT capabilities: (0x3035) SCT Status supported.
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 12
|
||||
3 Spin_Up_Time POS--K 173 171 021 - 4325
|
||||
4 Start_Stop_Count -O--CK 090 090 000 - 10305
|
||||
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 15
|
||||
3 Spin_Up_Time POS--K 174 171 021 - 4300
|
||||
4 Start_Stop_Count -O--CK 089 089 000 - 11876
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 069 069 000 - 23190
|
||||
9 Power_On_Hours -O--CK 064 064 000 - 26720
|
||||
10 Spin_Retry_Count -O--CK 100 100 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 090 090 000 - 10157
|
||||
192 Power-Off_Retract_Count -O--CK 199 199 000 - 894
|
||||
193 Load_Cycle_Count -O--CK 197 197 000 - 9410
|
||||
194 Temperature_Celsius -O---K 110 080 000 - 37
|
||||
12 Power_Cycle_Count -O--CK 089 089 000 - 11578
|
||||
192 Power-Off_Retract_Count -O--CK 199 199 000 - 1105
|
||||
193 Load_Cycle_Count -O--CK 197 197 000 - 10770
|
||||
194 Temperature_Celsius -O---K 112 080 000 - 35
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
@@ -137,11 +137,11 @@ Error 5 [4] occurred at disk power-on lifetime: 2006 hours (83 days + 14 hours)
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d6 00 01 00 00 00 c2 4f e0 40 00 02:01:59.157 SMART WRITE LOG
|
||||
61 00 20 00 78 00 00 3a dc 23 40 40 00 02:01:59.156 WRITE FPDMA QUEUED
|
||||
b0 00 d6 00 01 00 c2 00 4f 00 e0 40 00 02:01:59.157 SMART WRITE LOG
|
||||
61 00 20 00 78 00 dc 00 23 3a 40 40 00 02:01:59.156 WRITE FPDMA QUEUED
|
||||
ec 00 00 00 00 00 00 00 00 00 00 40 00 02:01:59.154 IDENTIFY DEVICE
|
||||
60 00 20 00 60 00 00 04 0d d0 00 40 00 02:01:59.123 READ FPDMA QUEUED
|
||||
61 00 20 00 58 00 00 04 0d cf d8 40 00 02:01:59.099 WRITE FPDMA QUEUED
|
||||
60 00 20 00 60 00 0d 00 d0 04 00 40 00 02:01:59.123 READ FPDMA QUEUED
|
||||
61 00 20 00 58 00 0d 00 cf 04 d8 40 00 02:01:59.099 WRITE FPDMA QUEUED
|
||||
|
||||
Error 4 [3] occurred at disk power-on lifetime: 2006 hours (83 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
@@ -154,10 +154,10 @@ Error 4 [3] occurred at disk power-on lifetime: 2006 hours (83 days + 14 hours)
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d6 00 01 00 00 00 c2 4f e0 40 00 02:01:04.163 SMART WRITE LOG
|
||||
61 00 40 00 60 00 00 3a dc 1b 60 40 00 02:01:04.162 WRITE FPDMA QUEUED
|
||||
b0 00 d6 00 01 00 c2 00 4f 00 e0 40 00 02:01:04.163 SMART WRITE LOG
|
||||
61 00 40 00 60 00 dc 00 1b 3a 60 40 00 02:01:04.162 WRITE FPDMA QUEUED
|
||||
ec 00 00 00 00 00 00 00 00 00 00 40 00 02:01:04.160 IDENTIFY DEVICE
|
||||
60 00 40 00 48 00 00 04 0d cf 60 40 00 02:01:04.151 READ FPDMA QUEUED
|
||||
60 00 40 00 48 00 0d 00 cf 04 60 40 00 02:01:04.151 READ FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 40 00 02:01:04.075 SET FEATURES [Enable write cache]
|
||||
|
||||
Error 3 [2] occurred at disk power-on lifetime: 2006 hours (83 days + 14 hours)
|
||||
@@ -171,11 +171,11 @@ Error 3 [2] occurred at disk power-on lifetime: 2006 hours (83 days + 14 hours)
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d6 00 01 00 00 00 c2 4f e0 40 00 02:00:59.553 SMART WRITE LOG
|
||||
60 00 08 00 28 00 00 00 74 bf d8 40 00 02:00:59.526 READ FPDMA QUEUED
|
||||
60 00 08 00 20 00 00 01 67 41 20 40 00 02:00:59.526 READ FPDMA QUEUED
|
||||
60 00 08 00 18 00 00 00 17 4b b2 40 00 02:00:59.526 READ FPDMA QUEUED
|
||||
60 00 40 00 10 00 00 00 15 a2 82 40 00 02:00:59.526 READ FPDMA QUEUED
|
||||
b0 00 d6 00 01 00 c2 00 4f 00 e0 40 00 02:00:59.553 SMART WRITE LOG
|
||||
60 00 08 00 28 00 74 00 bf 00 d8 40 00 02:00:59.526 READ FPDMA QUEUED
|
||||
60 00 08 00 20 00 67 00 41 01 20 40 00 02:00:59.526 READ FPDMA QUEUED
|
||||
60 00 08 00 18 00 17 00 4b 00 b2 40 00 02:00:59.526 READ FPDMA QUEUED
|
||||
60 00 40 00 10 00 15 00 a2 00 82 40 00 02:00:59.526 READ FPDMA QUEUED
|
||||
|
||||
Error 2 [1] occurred at disk power-on lifetime: 2006 hours (83 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
@@ -188,9 +188,9 @@ Error 2 [1] occurred at disk power-on lifetime: 2006 hours (83 days + 14 hours)
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d6 00 01 00 00 00 c2 4f e0 40 00 02:00:06.817 SMART WRITE LOG
|
||||
b0 00 d6 00 01 00 c2 00 4f 00 e0 40 00 02:00:06.817 SMART WRITE LOG
|
||||
ec 00 00 00 00 00 00 00 00 00 00 40 00 02:00:06.815 IDENTIFY DEVICE
|
||||
61 00 20 00 10 00 00 08 83 43 80 40 00 02:00:06.814 WRITE FPDMA QUEUED
|
||||
61 00 20 00 10 00 83 00 43 08 80 40 00 02:00:06.814 WRITE FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 40 00 02:00:06.781 SET FEATURES [Enable write cache]
|
||||
ef 00 03 00 46 00 00 00 00 00 00 40 00 02:00:06.781 SET FEATURES [Set transfer mode]
|
||||
|
||||
@@ -205,9 +205,9 @@ Error 1 [0] occurred at disk power-on lifetime: 2006 hours (83 days + 14 hours)
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d6 00 01 00 00 00 c2 4f e0 40 00 01:59:51.980 SMART WRITE LOG
|
||||
b0 00 d6 00 01 00 c2 00 4f 00 e0 40 00 01:59:51.980 SMART WRITE LOG
|
||||
ec 00 00 00 00 00 00 00 00 00 00 40 00 01:59:51.978 IDENTIFY DEVICE
|
||||
61 00 20 00 f0 00 00 08 83 43 00 40 00 01:59:51.977 WRITE FPDMA QUEUED
|
||||
61 00 20 00 f0 00 83 00 43 08 00 40 00 01:59:51.977 WRITE FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 40 00 01:59:51.935 SET FEATURES [Enable write cache]
|
||||
ef 00 03 00 46 00 00 00 00 00 00 40 00 01:59:51.935 SET FEATURES [Set transfer mode]
|
||||
|
||||
@@ -232,9 +232,9 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 37 Celsius
|
||||
Power Cycle Min/Max Temperature: 22/37 Celsius
|
||||
Lifetime Min/Max Temperature: 20/67 Celsius
|
||||
Current Temperature: 35 Celsius
|
||||
Power Cycle Min/Max Temperature: 21/35 Celsius
|
||||
Lifetime Min/Max Temperature: 21/67 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
@@ -242,7 +242,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (323)
|
||||
Temperature History Size (Index): 478 (91)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
@@ -259,7 +259,7 @@ ID Size Value Description
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000a 2 10 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x8000 4 10170 Vendor specific
|
||||
0x8000 4 6759 Vendor specific
|
||||
|
||||
|
@@ -12,7 +12,7 @@ Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Fri Aug 21 12:57:56 2020 MSK
|
||||
Local Time is: Fri Aug 21 13:16:17 2020 MSK
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
@@ -73,7 +73,7 @@ ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
12 Power_Cycle_Count -O--CK 098 098 000 - 2185
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 379
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 1805
|
||||
194 Temperature_Celsius -O---K 113 095 000 - 34
|
||||
194 Temperature_Celsius -O---K 108 095 000 - 39
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
@@ -213,8 +213,8 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 24/33 Celsius
|
||||
Current Temperature: 39 Celsius
|
||||
Power Cycle Min/Max Temperature: 24/39 Celsius
|
||||
Lifetime Min/Max Temperature: 0/52 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
@@ -223,7 +223,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (174)
|
||||
Temperature History Size (Index): 478 (192)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
@@ -242,7 +242,7 @@ ID Size Value Description
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x8000 4 965 Vendor specific
|
||||
0x8000 4 2065 Vendor specific
|
||||
|
||||
|
||||
|
||||
|
@@ -13,7 +13,7 @@ Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.5, 3.0 Gb/s
|
||||
Local Time is: Mon May 25 13:50:45 2020 MSK
|
||||
Local Time is: Mon May 25 13:51:09 2020 MSK
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 128
|
||||
@@ -157,5 +157,5 @@ ID Size Value Description
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x8000 4 2546572 Vendor specific
|
||||
0x8000 4 2546596 Vendor specific
|
||||
|
||||
|
@@ -1,5 +1,5 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital RE3 Serial ATA
|
||||
@@ -13,7 +13,7 @@ Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.5, 3.0 Gb/s
|
||||
Local Time is: Wed Jul 15 17:32:54 2020 CEST
|
||||
Local Time is: Wed Oct 6 08:52:44 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 128
|
||||
@@ -28,8 +28,8 @@ Wt Cache Reorder: Enabled
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x84) Offline data collection activity
|
||||
was suspended by an interrupting command from host.
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
@@ -65,17 +65,17 @@ SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
||||
3 Spin_Up_Time POS--K 253 253 021 - 1083
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 125
|
||||
3 Spin_Up_Time POS--K 253 253 021 - 1050
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 138
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 001 001 000 - 91435
|
||||
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
|
||||
9 Power_On_Hours -O--CK 001 001 000 - 102106
|
||||
10 Spin_Retry_Count -O--CK 100 100 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 124
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 101
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 23
|
||||
194 Temperature_Celsius -O---K 108 099 000 - 42
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 137
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 108
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 29
|
||||
194 Temperature_Celsius -O---K 107 098 000 - 43
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
@@ -129,10 +129,10 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: SMART Off-line Data Collection executing in background (4)
|
||||
Current Temperature: 42 Celsius
|
||||
Power Cycle Min/Max Temperature: 26/48 Celsius
|
||||
Lifetime Min/Max Temperature: 41/51 Celsius
|
||||
Device State: Active (0)
|
||||
Current Temperature: 43 Celsius
|
||||
Power Cycle Min/Max Temperature: 39/51 Celsius
|
||||
Lifetime Min/Max Temperature: 43/52 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
@@ -140,7 +140,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (164)
|
||||
Temperature History Size (Index): 478 (107)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 70 (7.0 seconds)
|
||||
@@ -159,8 +159,8 @@ ID Size Value Description
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 16 Device-to-host register FISes sent due to a COMRESET
|
||||
0x8000 4 4585215 Vendor specific
|
||||
0x000a 2 19 Device-to-host register FISes sent due to a COMRESET
|
||||
0x8000 4 13769115 Vendor specific
|
||||
|
||||
|
||||
|
||||
|
@@ -1,5 +1,5 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital RE3 Serial ATA
|
||||
@@ -13,7 +13,7 @@ Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.5, 3.0 Gb/s
|
||||
Local Time is: Wed Jul 15 17:32:54 2020 CEST
|
||||
Local Time is: Wed Oct 6 08:52:44 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 128
|
||||
@@ -28,8 +28,8 @@ Wt Cache Reorder: Enabled
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x84) Offline data collection activity
|
||||
was suspended by an interrupting command from host.
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
@@ -66,16 +66,16 @@ Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
||||
3 Spin_Up_Time POS--K 253 253 021 - 1075
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 127
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 140
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 001 001 000 - 91273
|
||||
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
|
||||
9 Power_On_Hours -O--CK 001 001 000 - 101944
|
||||
10 Spin_Retry_Count -O--CK 100 100 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 123
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 101
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 25
|
||||
194 Temperature_Celsius -O---K 108 099 000 - 42
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 136
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 108
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 31
|
||||
194 Temperature_Celsius -O---K 106 098 000 - 44
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
@@ -163,10 +163,10 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: SMART Off-line Data Collection executing in background (4)
|
||||
Current Temperature: 42 Celsius
|
||||
Power Cycle Min/Max Temperature: 26/49 Celsius
|
||||
Lifetime Min/Max Temperature: 40/52 Celsius
|
||||
Device State: Active (0)
|
||||
Current Temperature: 44 Celsius
|
||||
Power Cycle Min/Max Temperature: 39/52 Celsius
|
||||
Lifetime Min/Max Temperature: 43/52 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
@@ -174,7 +174,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (15)
|
||||
Temperature History Size (Index): 478 (437)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 70 (7.0 seconds)
|
||||
@@ -193,8 +193,8 @@ ID Size Value Description
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
|
||||
0x8000 4 4585234 Vendor specific
|
||||
0x000a 2 16 Device-to-host register FISes sent due to a COMRESET
|
||||
0x8000 4 13769168 Vendor specific
|
||||
|
||||
|
||||
|
||||
|
Reference in New Issue
Block a user