mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 14, modified: 3797)
This commit is contained in:
@@ -13,7 +13,7 @@ Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Mon Mar 7 08:37:33 2022 CET
|
||||
Local Time is: Tue Mar 8 12:51:30 2022 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 128
|
||||
@@ -69,13 +69,13 @@ ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 36
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 090 090 000 - 7520
|
||||
9 Power_On_Hours -O--CK 090 090 000 - 7548
|
||||
10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 34
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 26
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 9
|
||||
194 Temperature_Celsius -O---K 108 095 000 - 44
|
||||
194 Temperature_Celsius -O---K 106 095 000 - 46
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
@@ -131,7 +131,7 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 44 Celsius
|
||||
Current Temperature: 46 Celsius
|
||||
Power Cycle Min/Max Temperature: 44/48 Celsius
|
||||
Lifetime Min/Max Temperature: 0/57 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
@@ -141,7 +141,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (237)
|
||||
Temperature History Size (Index): 478 (18)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 70 (7.0 seconds)
|
||||
@@ -162,5 +162,5 @@ ID Size Value Description
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x8000 4 252253 Vendor specific
|
||||
0x8000 4 353791 Vendor specific
|
||||
|
||||
|
@@ -1,5 +1,5 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital RE4
|
||||
@@ -10,10 +10,10 @@ Firmware Version: 01.01D01
|
||||
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Fri Mar 25 14:53:44 2022 CET
|
||||
Local Time is: Mon May 9 06:35:54 2022 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 128
|
||||
@@ -69,13 +69,13 @@ ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 42
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 020 020 000 - 58951
|
||||
9 Power_On_Hours -O--CK 018 018 000 - 60017
|
||||
10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 41
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 39
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 2
|
||||
194 Temperature_Celsius -O---K 124 109 000 - 28
|
||||
194 Temperature_Celsius -O---K 123 109 000 - 29
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
@@ -132,7 +132,7 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 28 Celsius
|
||||
Current Temperature: 29 Celsius
|
||||
Power Cycle Min/Max Temperature: 27/34 Celsius
|
||||
Lifetime Min/Max Temperature: 27/43 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
@@ -142,7 +142,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (97)
|
||||
Temperature History Size (Index): 478 (171)
|
||||
|
||||
SMART WRITE LOG does not return COUNT and LBA_LOW register
|
||||
SCT (Get) Error Recovery Control command failed
|
||||
@@ -160,7 +160,7 @@ ID Size Value Description
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 24 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000a 2 32 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x8000 4 1397570 Vendor specific
|
||||
0x8000 4 5248240 Vendor specific
|
||||
|
||||
|
@@ -1,5 +1,5 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital RE4
|
||||
@@ -10,10 +10,10 @@ Firmware Version: 01.01D01
|
||||
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Fri Mar 25 14:53:44 2022 CET
|
||||
Local Time is: Mon May 9 06:35:54 2022 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 128
|
||||
@@ -28,8 +28,8 @@ Wt Cache Reorder: Unknown
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Offline data collection status: (0x84) Offline data collection activity
|
||||
was suspended by an interrupting command from host.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
@@ -69,18 +69,18 @@ ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 38
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 021 021 000 - 57888
|
||||
9 Power_On_Hours -O--CK 020 020 000 - 58954
|
||||
10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 37
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 35
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 2
|
||||
194 Temperature_Celsius -O---K 123 110 000 - 29
|
||||
194 Temperature_Celsius -O---K 122 110 000 - 30
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 4
|
||||
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 3
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
@@ -131,7 +131,7 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 29 Celsius
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: 27/35 Celsius
|
||||
Lifetime Min/Max Temperature: 27/42 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
@@ -141,7 +141,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (41)
|
||||
Temperature History Size (Index): 478 (116)
|
||||
|
||||
SMART WRITE LOG does not return COUNT and LBA_LOW register
|
||||
SCT (Get) Error Recovery Control command failed
|
||||
@@ -159,9 +159,9 @@ ID Size Value Description
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 24 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000a 2 32 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x8000 4 1397574 Vendor specific
|
||||
0x8000 4 5248253 Vendor specific
|
||||
|
||||
|
||||
|
||||
|
@@ -1,4 +1,4 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build)
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
@@ -14,7 +14,7 @@ Form Factor: 3.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Jun 30 16:52:40 2020 EDT
|
||||
Local Time is: Wed Nov 25 23:15:30 2020 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
@@ -65,18 +65,18 @@ SCT capabilities: (0x203d) SCT Status supported.
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
|
||||
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
||||
3 Spin_Up_Time POS--K 100 253 021 - 0
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 1
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 2
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 2
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 096 096 000 - 3558
|
||||
10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 1
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 2
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 1
|
||||
194 Temperature_Celsius -O---K 107 107 000 - 40
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 2
|
||||
194 Temperature_Celsius -O---K 106 099 000 - 41
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 253 000 - 0
|
||||
@@ -118,7 +118,9 @@ SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 3550 -
|
||||
# 2 Short offline Completed without error 00% 3525 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
@@ -134,9 +136,9 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 40 Celsius
|
||||
Power Cycle Min/Max Temperature: 26/40 Celsius
|
||||
Lifetime Min/Max Temperature: 26/40 Celsius
|
||||
Current Temperature: 41 Celsius
|
||||
Power Cycle Min/Max Temperature: 34/41 Celsius
|
||||
Lifetime Min/Max Temperature: 26/48 Celsius
|
||||
Specified Max Operating Temperature: 60 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
Vendor specific:
|
||||
@@ -148,7 +150,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (137)
|
||||
Temperature History Size (Index): 478 (226)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 70 (7.0 seconds)
|
||||
@@ -157,18 +159,18 @@ SCT Error Recovery Control:
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 1 -D- Lifetime Power-On Resets
|
||||
0x01 0x010 4 2 -D- Power-on Hours
|
||||
0x01 0x018 6 37149399 -D- Logical Sectors Written
|
||||
0x01 0x020 6 329439 -D- Number of Write Commands
|
||||
0x01 0x028 6 15476 -D- Logical Sectors Read
|
||||
0x01 0x030 6 263 -D- Number of Read Commands
|
||||
0x01 0x038 6 7200000 -D- Date and Time TimeStamp
|
||||
0x01 0x048 2 0 ND- Workload Utilization
|
||||
0x01 0x008 4 2 -D- Lifetime Power-On Resets
|
||||
0x01 0x010 4 3558 -D- Power-on Hours
|
||||
0x01 0x018 6 830351407 -D- Logical Sectors Written
|
||||
0x01 0x020 6 13249033 -D- Number of Write Commands
|
||||
0x01 0x028 6 1905894356 -D- Logical Sectors Read
|
||||
0x01 0x030 6 23050676 -D- Number of Read Commands
|
||||
0x01 0x038 6 4218865408 -D- Date and Time TimeStamp
|
||||
0x01 0x048 2 15 ND- Workload Utilization
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 2 -D- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 2 -D- Head Flying Hours
|
||||
0x03 0x018 4 1 -D- Head Load Events
|
||||
0x03 0x008 4 3558 -D- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 3558 -D- Head Flying Hours
|
||||
0x03 0x018 4 2 -D- Head Load Events
|
||||
0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 -D- Read Recovery Attempts
|
||||
0x03 0x030 4 0 -D- Number of Mechanical Start Failures
|
||||
@@ -178,22 +180,22 @@ Page Offset Size Value Flags Description
|
||||
0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 40 -D- Current Temperature
|
||||
0x05 0x010 1 - -D- Average Short Term Temperature
|
||||
0x05 0x018 1 - -D- Average Long Term Temperature
|
||||
0x05 0x020 1 40 -D- Highest Temperature
|
||||
0x05 0x008 1 41 -D- Current Temperature
|
||||
0x05 0x010 1 40 -D- Average Short Term Temperature
|
||||
0x05 0x018 1 42 -D- Average Long Term Temperature
|
||||
0x05 0x020 1 49 -D- Highest Temperature
|
||||
0x05 0x028 1 30 -D- Lowest Temperature
|
||||
0x05 0x030 1 - -D- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 - -D- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - -D- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - -D- Lowest Average Long Term Temperature
|
||||
0x05 0x030 1 46 -D- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 38 -D- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 43 -D- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 42 -D- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 -D- Time in Over-Temperature
|
||||
0x05 0x058 1 60 -D- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 -D- Time in Under-Temperature
|
||||
0x05 0x068 1 0 -D- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 4 -D- Number of Hardware Resets
|
||||
0x06 0x010 4 4 -D- Number of ASR Events
|
||||
0x06 0x008 4 346 -D- Number of Hardware Resets
|
||||
0x06 0x010 4 346 -D- Number of ASR Events
|
||||
0x06 0x018 4 0 -D- Number of Interface CRC Errors
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
@@ -212,8 +214,8 @@ ID Size Value Description
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0009 2 18 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 19 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
|
@@ -14,7 +14,7 @@ Form Factor: 3.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu May 28 12:42:37 2020 EDT
|
||||
Local Time is: Thu May 28 12:55:11 2020 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
@@ -280,7 +280,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (142)
|
||||
Temperature History Size (Index): 478 (155)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 70 (7.0 seconds)
|
||||
|
Reference in New Issue
Block a user