1
0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30

Update of reports (new: 129, modified: 0)

This commit is contained in:
Andrey Ponomarenko
2020-06-22 15:26:52 +03:00
parent fe1dcd6109
commit f8d5dc7417
164 changed files with 25774 additions and 162 deletions

View File

@@ -0,0 +1,375 @@
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABF...
Device Model: TOSHIBA MQ01ABF050
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: AM0P1D
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Jun 3 20:03:45 2020 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 128
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1378
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
9 Power_On_Hours -O--CK 073 073 000 - 10867
12 Power_Cycle_Count -O--CK 100 100 000 - 2719
191 G-Sense_Error_Rate -O--CK 100 100 000 - 154
192 Power-Off_Retract_Count -O--CK 099 099 000 - 679
193 Load_Cycle_Count -O--CK 082 082 000 - 186058
194 Temperature_Celsius -O---K 100 100 000 - 38 (Min/Max 13/57)
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 86184669
200 Multi_Zone_Error_Rate -O--CK 100 100 000 - 304546932
240 Head_Flying_Hours -O--CK 077 077 000 - 9260
241 Total_LBAs_Written -O--CK 100 100 000 - 31147362381
242 Total_LBAs_Read -O--CK 100 100 000 - 28953779218
254 Free_Fall_Sensor -O--CK 100 100 000 - 3
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 55
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 55 [54] occurred at disk power-on lifetime: 8743 hours (364 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 b0 00 00 1d 0b eb 68 40 00 Error: UNC at LBA = 0x1d0beb68 = 487320424
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 08 00 00 1d 0b eb b8 40 00 00:02:36.424 READ FPDMA QUEUED
60 00 08 00 00 00 00 1d 0b eb b0 40 00 00:02:36.424 READ FPDMA QUEUED
60 00 08 00 f0 00 00 1d 0b eb a8 40 00 00:02:36.424 READ FPDMA QUEUED
60 00 08 00 e8 00 00 1d 0b eb a0 40 00 00:02:36.424 READ FPDMA QUEUED
60 00 08 00 e0 00 00 1d 0b eb 98 40 00 00:02:36.424 READ FPDMA QUEUED
Error 54 [53] occurred at disk power-on lifetime: 4159 hours (173 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 ff ff 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:02:20.960 SECURITY UNLOCK
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:02:20.955 IDENTIFY DEVICE
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:01:48.585 SECURITY UNLOCK
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:01:36.691 SECURITY UNLOCK
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:36.689 IDENTIFY DEVICE
Error 53 [52] occurred at disk power-on lifetime: 4159 hours (173 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 ff ff 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:01:48.585 SECURITY UNLOCK
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:01:36.691 SECURITY UNLOCK
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:36.689 IDENTIFY DEVICE
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:00:35.386 SECURITY UNLOCK
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.496 SECURITY UNLOCK
Error 52 [51] occurred at disk power-on lifetime: 4159 hours (173 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 ff ff 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:01:36.691 SECURITY UNLOCK
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:36.689 IDENTIFY DEVICE
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:00:35.386 SECURITY UNLOCK
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.496 SECURITY UNLOCK
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.492 IDENTIFY DEVICE
Error 51 [50] occurred at disk power-on lifetime: 4159 hours (173 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 ff ff 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:00:35.386 SECURITY UNLOCK
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.496 SECURITY UNLOCK
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.492 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:12.143 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:12.140 IDENTIFY DEVICE
Error 50 [49] occurred at disk power-on lifetime: 4159 hours (173 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 ff ff 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.496 SECURITY UNLOCK
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.492 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:12.143 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:12.140 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:12.137 IDENTIFY DEVICE
Error 49 [48] occurred at disk power-on lifetime: 4159 hours (173 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 ff ff 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:01:36.275 SECURITY UNLOCK
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:36.270 IDENTIFY DEVICE
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:01:17.101 SECURITY UNLOCK
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:01:05.205 SECURITY UNLOCK
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:05.203 IDENTIFY DEVICE
Error 48 [47] occurred at disk power-on lifetime: 4159 hours (173 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 ff ff 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:01:17.101 SECURITY UNLOCK
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:01:05.205 SECURITY UNLOCK
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:05.203 IDENTIFY DEVICE
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:00:36.296 SECURITY UNLOCK
f2 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.400 SECURITY UNLOCK
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 10534 -
# 2 Extended offline Completed: read failure 00% 8823 487320424
# 3 Short offline Completed without error 00% 8802 -
# 4 Short offline Completed without error 00% 8165 -
# 5 Short offline Completed without error 00% 7826 -
# 6 Short offline Completed without error 00% 6246 -
# 7 Short offline Aborted by host 90% 4156 -
# 8 Short offline Aborted by host 90% 4156 -
# 9 Short offline Completed without error 00% 4156 -
#10 Short offline Aborted by host 90% 3593 -
#11 Extended offline Completed without error 00% 3577 -
#12 Short offline Completed without error 00% 3575 -
#13 Short offline Completed without error 00% 3206 -
#14 Short offline Completed without error 00% 2460 -
#15 Short offline Completed without error 00% 1820 -
#16 Short offline Completed without error 00% 1516 -
#17 Short offline Completed without error 00% 1201 -
#18 Short offline Completed without error 00% 795 -
#19 Short offline Completed without error 00% 156 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 31/46 Celsius
Lifetime Min/Max Temperature: 13/57 Celsius
Specified Max Operating Temperature: 37 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 15/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 478 (110)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 2719 --- Lifetime Power-On Resets
0x01 0x010 4 10867 --- Power-on Hours
0x01 0x018 6 31147362381 --- Logical Sectors Written
0x01 0x020 6 326950278 --- Number of Write Commands
0x01 0x028 6 28953779218 --- Logical Sectors Read
0x01 0x030 6 379870059 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 154 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 4040 --- Spindle Motor Power-on Hours
0x03 0x010 4 9260 --- Head Flying Hours
0x03 0x018 4 186058 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 1 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 38 --- Current Temperature
0x05 0x010 1 40 N-- Average Short Term Temperature
0x05 0x018 1 37 N-- Average Long Term Temperature
0x05 0x020 1 57 --- Highest Temperature
0x05 0x028 1 13 --- Lowest Temperature
0x05 0x030 1 44 N-- Highest Average Short Term Temperature
0x05 0x038 1 30 N-- Lowest Average Short Term Temperature
0x05 0x040 1 39 N-- Highest Average Long Term Temperature
0x05 0x048 1 33 N-- Lowest Average Long Term Temperature
0x05 0x050 4 233 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 6 --- Time in Under-Temperature
0x05 0x068 1 15 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 9219 --- Number of Hardware Resets
0x06 0x018 4 1 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 18 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 29398 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 38 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC