mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 129, modified: 0)
This commit is contained in:
Andrey Ponomarenko
316
HDD/WDC/WD1001/WD1001FALS-00J7B1/EDB963BD55D6
Normal file
316
HDD/WDC/WD1001/WD1001FALS-00J7B1/EDB963BD55D6
Normal file
@@ -0,0 +1,316 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital Caviar Black
|
||||
Device Model: WDC WD1001FALS-00J7B1
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0014ee ...
|
||||
Firmware Version: 05.00K05
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.5, 3.0 Gb/s
|
||||
Local Time is: Wed Jun 3 12:31:47 2020 EEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x84) Offline data collection activity
|
||||
was suspended by an interrupting command from host.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: (19200) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 221) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 5) minutes.
|
||||
SCT capabilities: (0x303f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
||||
3 Spin_Up_Time POS--K 225 221 021 - 8741
|
||||
4 Start_Stop_Count -O--CK 091 091 000 - 9954
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
|
||||
9 Power_On_Hours -O--CK 028 028 000 - 53193
|
||||
10 Spin_Retry_Count -O--CK 100 100 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 094 094 000 - 6077
|
||||
192 Power-Off_Retract_Count -O--CK 199 199 000 - 1300
|
||||
193 Load_Cycle_Count -O--CK 197 197 000 - 9954
|
||||
194 Temperature_Celsius -O---K 116 097 000 - 34
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 17
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 3
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 17325
|
||||
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
||||
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
|
||||
0xc0 GPL,SL VS 1 Device vendor specific log
|
||||
0xc1 GPL VS 24 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
||||
Device Error Count: 12
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 12 [11] occurred at disk power-on lifetime: 41955 hours (1748 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 5e a4 00 38 8c 40 00 Error: UNC at LBA = 0x5ea400388c = 406478403724
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 10 00 00 5e 38 a4 20 40 00 06:00:36.997 READ FPDMA QUEUED
|
||||
60 00 58 00 08 00 00 60 6c 76 d0 40 00 06:00:36.997 READ FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 06:00:36.997 SET FEATURES [Enable write cache]
|
||||
60 01 00 00 10 00 00 5e 38 a4 20 40 00 06:00:34.276 READ FPDMA QUEUED
|
||||
60 00 58 00 08 00 00 60 6c 76 d0 40 00 06:00:34.276 READ FPDMA QUEUED
|
||||
|
||||
Error 11 [10] occurred at disk power-on lifetime: 41955 hours (1748 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 5e a4 00 38 8c 40 00 Error: UNC at LBA = 0x5ea400388c = 406478403724
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 10 00 00 5e 38 a4 20 40 00 06:00:34.276 READ FPDMA QUEUED
|
||||
60 00 58 00 08 00 00 60 6c 76 d0 40 00 06:00:34.276 READ FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 06:00:34.267 SET FEATURES [Enable write cache]
|
||||
60 01 00 00 10 00 00 5e 38 a4 20 40 00 06:00:31.827 READ FPDMA QUEUED
|
||||
60 00 58 00 08 00 00 60 6c 76 d0 40 00 06:00:31.827 READ FPDMA QUEUED
|
||||
|
||||
Error 10 [9] occurred at disk power-on lifetime: 41955 hours (1748 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 5e a4 00 38 8c 40 00 Error: UNC at LBA = 0x5ea400388c = 406478403724
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 10 00 00 5e 38 a4 20 40 00 06:00:31.827 READ FPDMA QUEUED
|
||||
60 00 58 00 08 00 00 60 6c 76 d0 40 00 06:00:31.827 READ FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 06:00:31.827 SET FEATURES [Enable write cache]
|
||||
60 01 00 00 10 00 00 5e 38 a4 20 40 00 06:00:29.238 READ FPDMA QUEUED
|
||||
60 00 58 00 08 00 00 60 6c 76 d0 40 00 06:00:29.238 READ FPDMA QUEUED
|
||||
|
||||
Error 9 [8] occurred at disk power-on lifetime: 41955 hours (1748 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 5e a4 00 38 8c 40 00 Error: UNC at LBA = 0x5ea400388c = 406478403724
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 10 00 00 5e 38 a4 20 40 00 06:00:29.238 READ FPDMA QUEUED
|
||||
60 00 58 00 08 00 00 60 6c 76 d0 40 00 06:00:29.238 READ FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 06:00:29.238 SET FEATURES [Enable write cache]
|
||||
60 01 00 00 10 00 00 5e 38 a4 20 40 00 06:00:26.525 READ FPDMA QUEUED
|
||||
60 00 58 00 08 00 00 60 6c 76 d0 40 00 06:00:26.525 READ FPDMA QUEUED
|
||||
|
||||
Error 8 [7] occurred at disk power-on lifetime: 41955 hours (1748 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 5e a4 00 38 8c 40 00 Error: UNC at LBA = 0x5ea400388c = 406478403724
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 10 00 00 5e 38 a4 20 40 00 06:00:26.525 READ FPDMA QUEUED
|
||||
60 00 58 00 08 00 00 60 6c 76 d0 40 00 06:00:26.525 READ FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 06:00:26.516 SET FEATURES [Enable write cache]
|
||||
60 00 58 00 10 00 00 60 6c 76 d0 40 00 06:00:24.081 READ FPDMA QUEUED
|
||||
60 00 58 00 10 00 00 60 6c 2c b8 40 00 06:00:24.060 READ FPDMA QUEUED
|
||||
|
||||
Error 7 [6] occurred at disk power-on lifetime: 41955 hours (1748 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 5e a4 00 38 8c 40 00 Error: UNC at LBA = 0x5ea400388c = 406478403724
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 58 00 10 00 00 60 6c 76 d0 40 00 06:00:24.081 READ FPDMA QUEUED
|
||||
60 00 58 00 10 00 00 60 6c 2c b8 40 00 06:00:24.060 READ FPDMA QUEUED
|
||||
60 01 00 00 08 00 00 5e 38 a4 20 40 00 06:00:24.060 READ FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 06:00:24.060 SET FEATURES [Enable write cache]
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 06:00:24.060 SET FEATURES [Enable write cache]
|
||||
|
||||
Error 6 [5] occurred at disk power-on lifetime: 41955 hours (1748 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 5e a4 00 38 8c 40 00 Error: UNC at LBA = 0x5ea400388c = 406478403724
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 18 00 00 5e 38 a4 20 40 00 06:00:21.337 READ FPDMA QUEUED
|
||||
60 00 28 00 08 00 00 60 6c 2c 38 40 00 06:00:21.337 READ FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 06:00:21.337 SET FEATURES [Enable write cache]
|
||||
ec 00 00 00 00 00 00 00 00 00 00 a0 00 06:00:21.337 IDENTIFY DEVICE
|
||||
60 01 00 00 08 00 00 5e 38 a4 20 40 00 06:00:18.865 READ FPDMA QUEUED
|
||||
|
||||
Error 5 [4] occurred at disk power-on lifetime: 41955 hours (1748 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 01 00 5e a4 00 38 8c 40 00 Error: UNC at LBA = 0x5ea400388c = 406478403724
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 08 00 00 5e 38 a4 20 40 00 06:00:18.865 READ FPDMA QUEUED
|
||||
60 00 f8 00 f8 00 00 5e 38 af a0 40 00 06:00:18.815 READ FPDMA QUEUED
|
||||
60 00 40 00 f0 00 00 60 77 2d 20 40 00 06:00:18.672 READ FPDMA QUEUED
|
||||
60 00 10 00 e8 00 00 60 77 2d 10 40 00 06:00:18.672 READ FPDMA QUEUED
|
||||
60 00 10 00 e0 00 00 60 77 10 d8 40 00 06:00:18.670 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed: read failure 90% 45766 1579718500
|
||||
# 2 Extended offline Completed: read failure 90% 43552 1579718500
|
||||
# 3 Extended offline Completed: read failure 90% 42929 1579718500
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: SMART Off-line Data Collection executing in background (4)
|
||||
Current Temperature: 34 Celsius
|
||||
Power Cycle Min/Max Temperature: 23/34 Celsius
|
||||
Lifetime Min/Max Temperature: 24/53 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 128 (8)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
|
||||
0x8000 4 2135 Vendor specific
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user