mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 321, modified: 0)
This commit is contained in:
Andrey Ponomarenko
372
HDD/Toshiba/MQ01/MQ01ABD100/C7A93B3F187E
Normal file
372
HDD/Toshiba/MQ01/MQ01ABD100/C7A93B3F187E
Normal file
@@ -0,0 +1,372 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Toshiba 2.5" HDD MQ01ABD...
|
||||
Device Model: TOSHIBA MQ01ABD100
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000039 ...
|
||||
Firmware Version: AX0R5J
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: 5400 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon May 25 18:33:30 2020 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 248) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--K 100 100 001 - 1365
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 21062
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
|
||||
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 073 073 000 - 11127
|
||||
10 Spin_Retry_Count PO--CK 253 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 1346
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 3162
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 53
|
||||
193 Load_Cycle_Count -O--CK 091 091 000 - 96931
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 49 (Min/Max 15/74)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 4212
|
||||
220 Disk_Shift -O---- 100 100 000 - 0
|
||||
222 Loaded_Hours -O--CK 094 094 000 - 2783
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
||||
224 Load_Friction -O---K 100 100 000 - 0
|
||||
226 Load-in_Time -OS--K 100 100 000 - 265
|
||||
240 Head_Flying_Hours P----- 100 100 001 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 4212 (device log contains only the most recent 256 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 4212 [115] occurred at disk power-on lifetime: 2800 hours (116 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 41 00 f8 00 00 1b 52 e3 ef 40 00 Error: ICRC, ABRT at LBA = 0x1b52e3ef = 458417135
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 01 00 00 08 00 00 1b 52 e4 f0 40 00 46d+10:10:19.016 WRITE FPDMA QUEUED
|
||||
61 01 00 00 00 00 00 1b 52 e3 f0 40 00 46d+10:10:19.016 WRITE FPDMA QUEUED
|
||||
61 01 00 00 f8 00 00 1b 52 e2 f0 40 00 46d+10:10:19.016 WRITE FPDMA QUEUED
|
||||
ef 00 02 00 00 00 00 00 00 00 00 40 00 46d+10:10:19.015 SET FEATURES [Enable write cache]
|
||||
ef 00 aa 00 00 00 00 00 00 00 00 40 00 46d+10:10:19.015 SET FEATURES [Enable read look-ahead]
|
||||
|
||||
Error 4211 [114] occurred at disk power-on lifetime: 2800 hours (116 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 41 00 78 00 00 06 56 a8 67 40 00 Error: ICRC, ABRT at LBA = 0x0656a867 = 106342503
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 01 00 00 a0 00 00 06 56 ac 68 40 00 46d+09:49:12.660 WRITE FPDMA QUEUED
|
||||
61 01 00 00 98 00 00 06 56 ab 68 40 00 46d+09:49:12.660 WRITE FPDMA QUEUED
|
||||
61 01 00 00 90 00 00 06 56 aa 68 40 00 46d+09:49:12.660 WRITE FPDMA QUEUED
|
||||
61 01 00 00 88 00 00 06 56 a9 68 40 00 46d+09:49:12.660 WRITE FPDMA QUEUED
|
||||
61 01 00 00 80 00 00 06 56 a8 68 40 00 46d+09:49:12.660 WRITE FPDMA QUEUED
|
||||
|
||||
Error 4210 [113] occurred at disk power-on lifetime: 2800 hours (116 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 41 00 00 00 00 01 30 5b ef 40 00 Error: ICRC, ABRT at LBA = 0x01305bef = 19946479
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 01 00 00 20 00 00 01 30 5e f0 40 00 46d+09:31:45.125 WRITE FPDMA QUEUED
|
||||
61 01 00 00 18 00 00 01 30 5d f0 40 00 46d+09:31:45.125 WRITE FPDMA QUEUED
|
||||
61 01 00 00 10 00 00 01 30 5c f0 40 00 46d+09:31:45.125 WRITE FPDMA QUEUED
|
||||
61 01 00 00 08 00 00 01 30 5b f0 40 00 46d+09:31:45.125 WRITE FPDMA QUEUED
|
||||
61 01 00 00 00 00 00 01 30 5a f0 40 00 46d+09:31:45.125 WRITE FPDMA QUEUED
|
||||
|
||||
Error 4209 [112] occurred at disk power-on lifetime: 2800 hours (116 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 41 00 00 00 00 45 54 b8 9f 40 00 Error: ICRC, ABRT at LBA = 0x4554b89f = 1163180191
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 01 00 00 00 00 00 45 54 b7 a0 40 00 46d+09:24:52.768 WRITE FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 00 46d+09:24:51.124 FLUSH CACHE EXT
|
||||
61 00 08 00 f0 00 00 74 70 6b 98 40 00 46d+09:24:51.123 WRITE FPDMA QUEUED
|
||||
61 00 08 00 e8 00 00 74 70 69 98 40 00 46d+09:24:51.123 WRITE FPDMA QUEUED
|
||||
61 00 08 00 e0 00 00 00 00 03 98 40 00 46d+09:24:51.123 WRITE FPDMA QUEUED
|
||||
|
||||
Error 4208 [111] occurred at disk power-on lifetime: 2799 hours (116 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 41 00 08 00 00 57 7c 0e b7 40 00 Error: ICRC, ABRT at LBA = 0x577c0eb7 = 1467748023
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 10 00 38 00 00 57 7c 13 b8 40 00 46d+09:10:31.847 WRITE FPDMA QUEUED
|
||||
61 01 00 00 30 00 00 57 7c 12 b8 40 00 46d+09:10:31.847 WRITE FPDMA QUEUED
|
||||
61 01 00 00 28 00 00 57 7c 11 b8 40 00 46d+09:10:31.847 WRITE FPDMA QUEUED
|
||||
61 01 00 00 20 00 00 57 7c 10 b8 40 00 46d+09:10:31.847 WRITE FPDMA QUEUED
|
||||
61 01 00 00 18 00 00 57 7c 0f b8 40 00 46d+09:10:31.847 WRITE FPDMA QUEUED
|
||||
|
||||
Error 4207 [110] occurred at disk power-on lifetime: 2799 hours (116 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 41 00 f0 00 00 59 3e f0 cf 40 00 Error: ICRC, ABRT at LBA = 0x593ef0cf = 1497297103
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 01 00 00 28 00 00 59 3e f6 d0 40 00 46d+09:07:14.515 WRITE FPDMA QUEUED
|
||||
61 01 00 00 20 00 00 59 3e f5 d0 40 00 46d+09:07:14.515 WRITE FPDMA QUEUED
|
||||
61 01 00 00 18 00 00 59 3e f4 d0 40 00 46d+09:07:14.515 WRITE FPDMA QUEUED
|
||||
61 01 00 00 10 00 00 59 3e f3 d0 40 00 46d+09:07:14.515 WRITE FPDMA QUEUED
|
||||
61 01 00 00 08 00 00 59 3e f2 d0 40 00 46d+09:07:14.515 WRITE FPDMA QUEUED
|
||||
|
||||
Error 4206 [109] occurred at disk power-on lifetime: 2799 hours (116 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 41 00 a8 00 00 53 41 3e 6f 40 00 Error: ICRC, ABRT at LBA = 0x53413e6f = 1396784751
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 20 00 e0 00 00 53 41 44 70 40 00 46d+09:00:12.292 WRITE FPDMA QUEUED
|
||||
61 01 00 00 d8 00 00 53 41 43 70 40 00 46d+09:00:12.292 WRITE FPDMA QUEUED
|
||||
61 01 00 00 d0 00 00 53 41 42 70 40 00 46d+09:00:12.292 WRITE FPDMA QUEUED
|
||||
61 01 00 00 c8 00 00 53 41 41 70 40 00 46d+09:00:12.292 WRITE FPDMA QUEUED
|
||||
61 01 00 00 c0 00 00 53 41 40 70 40 00 46d+09:00:12.292 WRITE FPDMA QUEUED
|
||||
|
||||
Error 4205 [108] occurred at disk power-on lifetime: 1185 hours (49 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 41 00 a8 00 00 00 68 4d 5f 40 00 Error: ABRT
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:00:26.884 READ LOG EXT
|
||||
60 01 00 00 c8 00 00 00 68 50 60 40 00 00:00:26.884 READ FPDMA QUEUED
|
||||
60 01 00 00 c0 00 00 00 68 4f 60 40 00 00:00:26.884 READ FPDMA QUEUED
|
||||
60 01 00 00 b8 00 00 00 68 4e 60 40 00 00:00:26.884 READ FPDMA QUEUED
|
||||
60 01 00 00 b0 00 00 00 68 4d 60 40 00 00:00:26.884 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 10570 -
|
||||
# 2 Extended offline Aborted by host 90% 1189 -
|
||||
# 3 Short offline Completed without error 00% 1187 -
|
||||
# 4 Extended offline Aborted by host 80% 1187 -
|
||||
# 5 Extended captive Aborted by host 90% 1186 -
|
||||
# 6 Extended captive Aborted by host 90% 1186 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 49 Celsius
|
||||
Power Cycle Min/Max Temperature: 44/51 Celsius
|
||||
Lifetime Min/Max Temperature: 15/74 Celsius
|
||||
Under/Over Temperature Limit Count: 0/53716
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/55 Celsius
|
||||
Min/Max Temperature Limit: 5/55 Celsius
|
||||
Temperature History Size (Index): 478 (224)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 1346 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 10985 --- Power-on Hours
|
||||
0x01 0x018 6 10413553313 --- Logical Sectors Written
|
||||
0x01 0x020 6 212075366 --- Number of Write Commands
|
||||
0x01 0x028 6 7484752520 --- Logical Sectors Read
|
||||
0x01 0x030 6 105459752 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
|
||||
0x02 0x010 4 3162 --- Overlimit Shock Events
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 9974 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 2783 --- Head Flying Hours
|
||||
0x03 0x018 4 96931 --- Head Load Events
|
||||
0x03 0x020 4 232 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 26040 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 49 --- Current Temperature
|
||||
0x05 0x010 1 47 N-- Average Short Term Temperature
|
||||
0x05 0x018 1 48 N-- Average Long Term Temperature
|
||||
0x05 0x020 1 74 --- Highest Temperature
|
||||
0x05 0x028 1 15 --- Lowest Temperature
|
||||
0x05 0x030 1 63 N-- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 23 N-- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 55 N-- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 29 N-- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 105769 --- Time in Over-Temperature
|
||||
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 492574 --- Number of Hardware Resets
|
||||
0x06 0x018 4 4212 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 18 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 5 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user