mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 321, modified: 0)
This commit is contained in:
Andrey Ponomarenko
112
SSD/Micron/1100/1100_MTFDDAK256TBN/270BD7E81CFA
Normal file
112
SSD/Micron/1100/1100_MTFDDAK256TBN/270BD7E81CFA
Normal file
@@ -0,0 +1,112 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs
|
||||
Device Model: Micron_1100_MTFDDAK256TBN
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 00a075 ...
|
||||
Firmware Version: M0MA032
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue May 26 22:41:16 2020 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 769) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 5) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 3) minutes.
|
||||
SCT capabilities: (0x0035) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
|
||||
5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0
|
||||
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2776
|
||||
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 349
|
||||
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
173 Ave_Block-Erase_Count 0x0032 098 098 000 Old_age Always - 31
|
||||
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 17
|
||||
183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0
|
||||
184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
||||
194 Temperature_Celsius 0x0022 059 055 000 Old_age Always - 41 (Min/Max 17/45)
|
||||
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
|
||||
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
202 Percent_Lifetime_Remain 0x0030 098 098 001 Old_age Offline - 2
|
||||
206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0
|
||||
246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 8555791889
|
||||
247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 272041452
|
||||
248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 47060083
|
||||
180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 2048
|
||||
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Vendor (0xff) Completed without error 00% 2748 -
|
||||
# 2 Vendor (0xff) Completed without error 00% 2458 -
|
||||
# 3 Vendor (0xff) Completed without error 00% 2313 -
|
||||
# 4 Vendor (0xff) Completed without error 00% 1945 -
|
||||
# 5 Vendor (0xff) Completed without error 00% 1635 -
|
||||
# 6 Vendor (0xff) Completed without error 00% 1369 -
|
||||
# 7 Vendor (0xff) Completed without error 00% 968 -
|
||||
# 8 Vendor (0xff) Completed without error 00% 876 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Completed [00% left] (21478-87013)
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user