Update of reports (new: 321, modified: 0)

2025-05-31 16:21:41 +05:30 · 2020-06-01 15:47:06 +03:00
parent e9f946b4e5
commit fe1dcd6109
361 changed files with 60080 additions and 2 deletions
--- a/250GB/72BC89D9FD2F
+++ b/250GB/72BC89D9FD2F
@@ -0,0 +1,93 @@
+smartctl 6.6 2017-11-05 r4594 [MidnightBSD 1.2 amd64] (local build)
+Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
+
+=== START OF INFORMATION SECTION ===
+Model Family:     Samsung based SSDs
+Device Model:     Samsung SSD 750 EVO 250GB
+Serial Number:    --
+LU WWN Device Id: 5 002538 ...
+Firmware Version: MAT01B6Q
+User Capacity:    250,059,350,016 bytes [250 GB]
+Sector Size:      512 bytes logical/physical
+Rotation Rate:    Solid State Device
+Form Factor:      2.5 inches
+Device is:        In smartctl database [for details use: -P show]
+ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
+SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
+Local Time is:    Fri May 22 11:53:44 2020 EDT
+SMART support is: Available - device has SMART capability.
+SMART support is: Enabled
+
+=== START OF READ SMART DATA SECTION ===
+SMART overall-health self-assessment test result: PASSED
+
+General SMART Values:
+Offline data collection status:  (0x00)	Offline data collection activity
+					was never started.
+					Auto Offline Data Collection: Disabled.
+Self-test execution status:      (   0)	The previous self-test routine completed
+					without error or no self-test has ever 
+					been run.
+Total time to complete Offline 
+data collection: 		(    0) seconds.
+Offline data collection
+capabilities: 			 (0x53) SMART execute Offline immediate.
+					Auto Offline data collection on/off support.
+					Suspend Offline collection upon new
+					command.
+					No Offline surface scan supported.
+					Self-test supported.
+					No Conveyance Self-test supported.
+					Selective Self-test supported.
+SMART capabilities:            (0x0003)	Saves SMART data before entering
+					power-saving mode.
+					Supports SMART auto save timer.
+Error logging capability:        (0x01)	Error logging supported.
+					General Purpose Logging supported.
+Short self-test routine 
+recommended polling time: 	 (   2) minutes.
+Extended self-test routine
+recommended polling time: 	 ( 133) minutes.
+SCT capabilities: 	       (0x003d)	SCT Status supported.
+					SCT Error Recovery Control supported.
+					SCT Feature Control supported.
+					SCT Data Table supported.
+
+SMART Attributes Data Structure revision number: 1
+Vendor Specific SMART Attributes with Thresholds:
+ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
+  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
+  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       17621
+ 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       632
+177 Wear_Leveling_Count     0x0013   097   097   000    Pre-fail  Always       -       13
+179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
+181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
+182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
+183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
+187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
+190 Airflow_Temperature_Cel 0x0032   072   054   000    Old_age   Always       -       28
+195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
+199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
+235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       69
+241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       2665219524
+
+SMART Error Log Version: 1
+No Errors Logged
+
+SMART Self-test log structure revision number 1
+No self-tests have been logged.  [To run self-tests, use: smartctl -t]
+
+SMART Selective self-test log data structure revision number 1
+ SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
+    1        0        0  Not_testing
+    2        0        0  Not_testing
+    3        0        0  Not_testing
+    4        0        0  Not_testing
+    5        0        0  Not_testing
+  255        0    65535  Read_scanning was never started
+Selective self-test flags (0x0):
+  After scanning selected spans, do NOT read-scan remainder of disk.
+If Selective self-test is pending on power-up, resume after 0 minute delay.
+
+
+