1
0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Files
2021-05-18 23:01:35 +03:00

259 lines
12 KiB
Plaintext

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: APPLE HDD HTS541010A9E662
Serial Number: --
LU WWN Device Id: 5 000cca ...
Firmware Version: JA0AB5D0
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Mar 30 09:58:32 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 214) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0
2 Throughput_Performance P-S--- 198 198 040 - 123
3 Spin_Up_Time POS--- 169 169 033 - 1
4 Start_Stop_Count -O--C- 082 082 000 - 28469
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 115 115 040 - 34
9 Power_On_Hours -O--C- 045 045 000 - 24207
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 082 082 000 - 28409
160 Unknown_Attribute -O--CK 100 100 000 - 0
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 1
192 Power-Off_Retract_Count -O--CK 096 096 000 - 38654706540
193 Load_Cycle_Count -O--C- 081 081 000 - 194689
194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 10/49)
195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
223 Load_Retry_Count -O-R-- 100 100 000 - 0
254 Free_Fall_Sensor -O--CK 100 100 000 - 77
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 1150 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1150 [1] occurred at disk power-on lifetime: 5548 hours (231 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 69 ec c9 2f 09 00 Error: UNC 1 sectors at LBA = 0x69ecc92f = 1777125679
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 69 ec c9 2f 40 00 03:15:05.764 READ DMA EXT
25 00 00 00 01 00 00 69 ec c9 2f 40 00 03:15:01.975 READ DMA EXT
25 00 00 00 01 00 00 69 ec c9 2f 40 00 03:14:58.186 READ DMA EXT
25 00 00 00 01 00 00 69 ec c9 2f 40 00 03:14:54.411 READ DMA EXT
25 00 00 00 08 00 00 40 4b 5f a8 40 00 03:14:54.397 READ DMA EXT
Error 1149 [0] occurred at disk power-on lifetime: 5548 hours (231 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 69 ec c9 2f 09 00 Error: UNC 1 sectors at LBA = 0x69ecc92f = 1777125679
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 69 ec c9 2f 40 00 03:15:01.975 READ DMA EXT
25 00 00 00 01 00 00 69 ec c9 2f 40 00 03:14:58.186 READ DMA EXT
25 00 00 00 01 00 00 69 ec c9 2f 40 00 03:14:54.411 READ DMA EXT
25 00 00 00 08 00 00 40 4b 5f a8 40 00 03:14:54.397 READ DMA EXT
25 00 00 00 08 00 00 09 26 b1 60 40 00 03:14:54.385 READ DMA EXT
Error 1148 [3] occurred at disk power-on lifetime: 5548 hours (231 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 69 ec c9 2f 09 00 Error: UNC 1 sectors at LBA = 0x69ecc92f = 1777125679
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 69 ec c9 2f 40 00 03:14:58.186 READ DMA EXT
25 00 00 00 01 00 00 69 ec c9 2f 40 00 03:14:54.411 READ DMA EXT
25 00 00 00 08 00 00 40 4b 5f a8 40 00 03:14:54.397 READ DMA EXT
25 00 00 00 08 00 00 09 26 b1 60 40 00 03:14:54.385 READ DMA EXT
25 00 00 00 08 00 00 09 07 fe 40 40 00 03:14:54.375 READ DMA EXT
Error 1147 [2] occurred at disk power-on lifetime: 5548 hours (231 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 69 ec c9 2f 09 00 Error: UNC 1 sectors at LBA = 0x69ecc92f = 1777125679
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 69 ec c9 2f 40 00 03:14:54.411 READ DMA EXT
25 00 00 00 08 00 00 40 4b 5f a8 40 00 03:14:54.397 READ DMA EXT
25 00 00 00 08 00 00 09 26 b1 60 40 00 03:14:54.385 READ DMA EXT
25 00 00 00 08 00 00 09 07 fe 40 40 00 03:14:54.375 READ DMA EXT
25 00 00 00 08 00 00 09 05 6d 40 40 00 03:14:54.358 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2143 -
# 2 Short offline Completed without error 00% 1600 -
# 3 Short offline Completed without error 00% 1600 -
# 4 Short offline Completed without error 00% 1600 -
# 5 Short offline Completed without error 00% 1600 -
# 6 Short offline Completed without error 00% 1595 -
# 7 Short offline Completed without error 00% 1591 -
# 8 Short offline Completed without error 00% 1591 -
# 9 Short offline Completed without error 00% 1589 -
#10 Short offline Completed without error 00% 1587 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: 26/36 Celsius
Lifetime Min/Max Temperature: 10/49 Celsius
Specified Max Operating Temperature: 28 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (25)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 358 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS