80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Fujitsu/MHV2120/MHV2120BH PL/331F7A55B020
Andrey Ponomarenko a41331e270 Update of reports (new: 14, modified: 3797)
2023-02-14 02:15:20 +03:00

311 lines
15 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHV
Device Model: FUJITSU MHV2120BH PL
Serial Number: --
Firmware Version: 892C
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a
Local Time is: Sat Jul 31 09:14:15 2021 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 702) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 82) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 257303
2 Throughput_Performance P-S--- 100 100 030 - 26673567
3 Spin_Up_Time PO---- 100 100 025 - 0
4 Start_Stop_Count -O--CK 099 099 000 - 2775
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 2612
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Seconds -O--CK 084 084 000 - 2h+17m+16s
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2735
192 Power-Off_Retract_Count -O--CK 100 100 000 - 197
193 Load_Cycle_Count -O--CK 097 097 000 - 79185
194 Temperature_Celsius -O---K 100 100 000 - 37 (Min/Max 9/60)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 9021
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6486)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 11936
203 Run_Out_Cancel -O---- 100 100 000 - 2632802042464
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 44
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 44 [43] occurred at disk power-on lifetime: 5273 hours (219 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 60 00 00 03 11 88 37 e0 00 Error: ICRC, ABRT 96 sectors at LBA = 0x03118837 = 51480631
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 f0 00 00 03 11 87 a7 e0 00 00:00:54.130 READ DMA EXT
25 00 03 00 10 00 00 03 11 87 97 e0 00 00:00:54.130 READ DMA EXT
25 00 03 00 f0 00 00 03 11 86 a7 e0 00 00:00:54.126 READ DMA EXT
25 00 03 00 10 00 00 03 11 86 97 e0 00 00:00:54.125 READ DMA EXT
25 00 03 00 f0 00 00 03 11 85 a7 e0 00 00:00:54.122 READ DMA EXT
Error 43 [42] occurred at disk power-on lifetime: 5273 hours (219 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 a0 00 00 03 01 14 f7 e0 00 Error: ICRC, ABRT 160 sectors at LBA = 0x030114f7 = 50402551
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 f0 00 00 03 01 14 a7 e0 00 00:00:33.422 READ DMA EXT
25 00 03 00 10 00 00 03 01 14 97 e0 00 00:00:33.421 READ DMA EXT
25 00 03 00 f0 00 00 03 01 13 a7 e0 00 00:00:33.418 READ DMA EXT
25 00 03 00 10 00 00 03 01 13 97 e0 00 00:00:33.417 READ DMA EXT
25 00 03 00 f0 00 00 03 01 12 a7 e0 00 00:00:33.412 READ DMA EXT
Error 42 [41] occurred at disk power-on lifetime: 5273 hours (219 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 60 00 00 05 50 c5 7f e0 00 Error: ICRC, ABRT 96 sectors at LBA = 0x0550c57f = 89179519
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 f0 00 00 05 50 c4 ef e0 00 00:48:47.366 READ DMA EXT
25 00 03 00 10 00 00 05 50 c4 df e0 00 00:48:47.365 READ DMA EXT
25 00 03 00 f0 00 00 05 50 c3 ef e0 00 00:48:47.362 READ DMA EXT
25 00 03 00 10 00 00 05 50 c3 df e0 00 00:48:47.361 READ DMA EXT
25 00 03 00 f0 00 00 05 50 c2 ef e0 00 00:48:47.358 READ DMA EXT
Error 41 [40] occurred at disk power-on lifetime: 5268 hours (219 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 30 00 00 06 8c f5 67 e0 00 Error: ICRC, ABRT 48 sectors at LBA = 0x068cf567 = 109901159
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 f0 00 00 06 8c f4 a7 e0 00 00:00:33.832 READ DMA EXT
25 00 03 00 10 00 00 06 8c f4 97 e0 00 00:00:33.832 READ DMA EXT
25 00 03 00 f0 00 00 06 8c f3 a7 e0 00 00:00:33.828 READ DMA EXT
25 00 03 00 10 00 00 06 8c f3 97 e0 00 00:00:33.828 READ DMA EXT
25 00 03 00 f0 00 00 06 8c f2 a7 e0 00 00:00:33.824 READ DMA EXT
Error 40 [39] occurred at disk power-on lifetime: 5264 hours (219 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 70 00 00 00 82 d6 9f e0 00 Error: ICRC, ABRT 112 sectors at LBA = 0x0082d69f = 8574623
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 80 00 00 00 82 d6 8f e0 00 00:18:32.091 READ DMA EXT
25 00 03 00 80 00 00 00 82 d6 0f e0 00 00:18:32.088 READ DMA EXT
25 00 03 00 80 00 00 00 82 d5 0f e0 00 00:18:32.085 READ DMA EXT
25 00 03 00 80 00 00 00 82 d5 8f e0 00 00:18:32.083 READ DMA EXT
25 00 03 00 80 00 00 00 82 d4 8f e0 00 00:18:32.081 READ DMA EXT
Error 39 [38] occurred at disk power-on lifetime: 5264 hours (219 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 56 9e f6 e0 00 Error: ICRC, ABRT at LBA = 0x00569ef6 = 5676790
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 08 00 00 00 56 9e ef e0 00 00:00:33.571 READ DMA EXT
25 00 03 00 08 00 00 00 55 d7 87 e0 00 00:00:33.567 READ DMA EXT
25 00 03 00 08 00 00 00 59 c3 c7 e0 00 00:00:33.559 READ DMA EXT
25 00 03 00 08 00 00 00 59 22 e7 e0 00 00:00:33.550 READ DMA EXT
25 00 03 00 08 00 00 00 58 95 47 e0 00 00:00:33.545 READ DMA EXT
Error 38 [37] occurred at disk power-on lifetime: 5258 hours (219 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 70 00 00 01 bf a2 af e0 00 Error: ICRC, ABRT 112 sectors at LBA = 0x01bfa2af = 29336239
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 80 00 00 01 bf a2 9f e0 00 00:08:43.104 READ DMA EXT
25 00 03 00 80 00 00 01 bf a2 1f e0 00 00:08:43.102 READ DMA EXT
25 00 03 00 80 00 00 01 bf a1 9f e0 00 00:08:43.099 READ DMA EXT
25 00 03 00 80 00 00 01 bf a1 1f e0 00 00:08:43.097 READ DMA EXT
25 00 03 00 80 00 00 01 bf a0 9f e0 00 00:08:43.095 READ DMA EXT
Error 37 [36] occurred at disk power-on lifetime: 5258 hours (219 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 70 00 00 01 bf 8a 2f e0 00 Error: ICRC, ABRT 112 sectors at LBA = 0x01bf8a2f = 29329967
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 80 00 00 01 bf 8a 1f e0 00 00:08:42.595 READ DMA EXT
25 00 03 00 80 00 00 01 bf 89 9f e0 00 00:08:42.593 READ DMA EXT
25 00 03 00 80 00 00 01 bf 89 1f e0 00 00:08:42.591 READ DMA EXT
25 00 03 00 80 00 00 01 bf 88 9f e0 00 00:08:42.588 READ DMA EXT
25 00 03 00 80 00 00 01 bf 88 1f e0 00 00:08:42.586 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: --/39 Celsius
Lifetime Min/Max Temperature: --/60 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (110)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
View Git Blame Copy Permalink