mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
170 lines
7.5 KiB
Plaintext
170 lines
7.5 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE-p3 amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Fujitsu MHY BH
|
|
Device Model: FUJITSU MHY2120BH
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 00000e ...
|
|
Firmware Version: 0084000D
|
|
User Capacity: 120,034,123,776 bytes [120 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ATA8-ACS T13/1699-D revision 3f
|
|
SATA Version is: SATA 2.5, 1.5 Gb/s
|
|
Local Time is: Tue Dec 26 18:26:05 2023 CST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM level is: 254 (maximum performance), recommended: 254
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 487) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 69) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x003d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 66805
|
|
2 Throughput_Performance P-S--- 100 100 030 - 26935296
|
|
3 Spin_Up_Time PO---- 100 100 025 - 1
|
|
4 Start_Stop_Count -O--CK 099 099 000 - 1507
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
|
|
7 Seek_Error_Rate POSR-- 100 100 047 - 3255
|
|
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
|
9 Power_On_Hours -O--CK 028 028 000 - 36222
|
|
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 1111
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 108
|
|
193 Load_Cycle_Count -O--CK 087 087 000 - 270622
|
|
194 Temperature_Celsius -O---K 100 100 000 - 34 (Min/Max 7/50)
|
|
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 100
|
|
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6977)
|
|
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
|
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
|
|
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 14972
|
|
203 Run_Out_Cancel -O---- 100 100 000 - 1529149590713
|
|
240 Transfer_Error_Rate -OSRCK 200 200 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 GPL,SL R/O 1 Summary SMART error log
|
|
0x02 GPL,SL R/O 51 Comprehensive SMART error log
|
|
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
|
|
0x06 GPL,SL R/O 1 SMART self-test log
|
|
0x07 GPL,SL R/O 2 Extended self-test log
|
|
0x09 GPL,SL R/W 1 Selective self-test log
|
|
0x10 GPL,SL R/O 1 NCQ Command Error log
|
|
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
|
0x23 GPL,SL R/O 1 Delayed sector log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa1 GPL,SL VS 1 Device vendor specific log
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (2 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 35349 -
|
|
# 2 Short offline Completed without error 00% 16890 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 2
|
|
SCT Version (vendor specific): 0 (0x0000)
|
|
Device State: Active (0)
|
|
Current Temperature: 34 Celsius
|
|
Power Cycle Min/Max Temperature: 32/35 Celsius
|
|
Lifetime Min/Max Temperature: 7/50 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: 5/60 Celsius
|
|
Min/Max Temperature Limit: -40/65 Celsius
|
|
Temperature History Size (Index): 478 (125)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: Disabled
|
|
Write: Disabled
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 4 0 Command failed due to ICRC error
|
|
0x0002 4 0 R_ERR response for data FIS
|
|
0x0003 4 0 R_ERR response for device-to-host data FIS
|
|
0x0004 4 0 R_ERR response for host-to-device data FIS
|
|
0x0005 4 0 R_ERR response for non-data FIS
|
|
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
|
0x0008 4 0 Device-to-host non-data FIS retries
|
|
0x0009 4 68 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 4 69 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 4 0 CRC errors within host-to-device FIS
|
|
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
|
|
|
|
|