80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/HPE/MM1000/MM1000GBKAL/F1658F9937EE
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

353 lines
18 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation.2 (SATA)
Device Model: MM1000GBKAL
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: HPGE
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Nov 24 21:41:32 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 634) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 206) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 084 063 044 - 237961160
3 Spin_Up_Time PO---- 094 094 070 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 127
5 Reallocated_Sector_Ct PO--CK 073 073 036 - 1106
7 Seek_Error_Rate POSR-- 075 060 030 - 34629268
9 Power_On_Hours -O--CK 049 049 000 - 45207
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 126
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 1545705648
184 End-to-End_Error -O--CK 100 100 003 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 076 047 045 - 24 (Min/Max 12/24)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 125
193 Load_Cycle_Count -O--CK 100 100 000 - 1998
194 Temperature_Celsius -O---K 024 053 000 - 24 (0 10 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 120 099 000 - 237961160
196 Reallocated_Event_Count PO--CK 073 073 036 - 1106
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL,SL R/O 1 SATA NCQ Non-Data log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 5176 Device vendor specific log
0xb6 GPL VS 1918 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 149 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 149 [8] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 82 2f c0 00 00 Error: IDNF at LBA = 0x22822fc0 = 578957248
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 82 2f c0 40 00 3d+15:56:24.205 WRITE FPDMA QUEUED
60 00 00 00 f0 00 00 23 21 3c c0 40 00 3d+15:56:24.204 READ FPDMA QUEUED
60 00 00 02 00 00 00 23 21 3a c0 40 00 3d+15:56:24.195 READ FPDMA QUEUED
61 00 00 00 08 00 00 22 82 30 20 40 00 3d+15:56:24.186 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 22 82 2f a8 40 00 3d+15:56:24.175 WRITE FPDMA QUEUED
Error 148 [7] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 82 2a 38 00 00 Error: IDNF at LBA = 0x22822a38 = 578955832
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 82 2a 38 40 00 3d+15:56:23.232 WRITE FPDMA QUEUED
60 00 00 00 20 00 00 23 21 92 40 40 00 3d+15:56:23.222 READ FPDMA QUEUED
61 00 00 00 08 00 00 22 82 2f 10 40 00 3d+15:56:23.201 WRITE FPDMA QUEUED
60 00 00 00 68 00 00 23 21 93 28 40 00 3d+15:56:23.201 READ FPDMA QUEUED
60 00 00 00 20 00 00 23 21 93 50 40 00 3d+15:56:23.201 READ FPDMA QUEUED
Error 147 [6] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 81 f3 80 00 00 Error: IDNF at LBA = 0x2281f380 = 578941824
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 81 f3 80 40 00 3d+15:56:12.772 WRITE FPDMA QUEUED
60 00 00 00 28 00 00 23 1c d9 90 40 00 3d+15:56:12.745 READ FPDMA QUEUED
60 00 00 00 b8 00 00 23 1c d8 60 40 00 3d+15:56:12.738 READ FPDMA QUEUED
60 00 00 00 40 00 00 23 1c d4 00 40 00 3d+15:56:12.737 READ FPDMA QUEUED
60 00 00 00 e0 00 00 23 1c d2 b8 40 00 3d+15:56:12.736 READ FPDMA QUEUED
Error 146 [5] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 81 ef 08 00 00 Error: IDNF at LBA = 0x2281ef08 = 578940680
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 81 ef 08 40 00 3d+15:56:11.561 WRITE FPDMA QUEUED
60 00 00 00 08 00 00 21 84 7d f0 40 00 3d+15:56:11.561 READ FPDMA QUEUED
60 00 00 00 10 00 00 21 84 7d 80 40 00 3d+15:56:11.561 READ FPDMA QUEUED
60 00 00 00 b8 00 00 21 84 7c c8 40 00 3d+15:56:11.560 READ FPDMA QUEUED
60 00 00 00 08 00 00 23 1c 75 f0 40 00 3d+15:56:11.482 READ FPDMA QUEUED
Error 145 [4] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 00 4c b0 00 00 Error: IDNF at LBA = 0x18004cb0 = 402672816
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 00 4c b0 40 00 3d+15:56:00.152 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 05 80 28 c0 40 00 3d+15:56:00.143 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 02 93 9f 78 40 00 3d+15:56:00.131 WRITE FPDMA QUEUED
60 00 00 00 20 00 00 23 17 29 28 40 00 3d+15:56:00.113 READ FPDMA QUEUED
60 00 00 00 20 00 00 23 17 29 00 40 00 3d+15:56:00.113 READ FPDMA QUEUED
Error 144 [3] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 81 2d 08 00 00 Error: IDNF at LBA = 0x22812d08 = 578891016
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 81 2d 08 40 00 3d+15:55:38.383 WRITE FPDMA QUEUED
60 00 00 02 00 00 00 23 0f fb 28 40 00 3d+15:55:38.353 READ FPDMA QUEUED
60 00 00 02 00 00 00 23 0f f9 28 40 00 3d+15:55:38.346 READ FPDMA QUEUED
60 00 00 02 00 00 00 23 0f f7 28 40 00 3d+15:55:38.345 READ FPDMA QUEUED
60 00 00 01 c8 00 00 23 0f f4 f8 40 00 3d+15:55:38.344 READ FPDMA QUEUED
Error 143 [2] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 00 2a e0 00 00 Error: IDNF at LBA = 0x18002ae0 = 402664160
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 00 2a e0 40 00 3d+15:54:08.975 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 21 00 2b 48 40 00 3d+15:54:08.933 WRITE FPDMA QUEUED
60 00 00 00 08 00 00 21 86 d9 40 40 00 3d+15:54:08.884 READ FPDMA QUEUED
60 00 00 00 08 00 00 21 86 d5 88 40 00 3d+15:54:08.817 READ FPDMA QUEUED
61 00 00 00 08 00 00 05 80 28 00 40 00 3d+15:54:08.798 WRITE FPDMA QUEUED
Error 142 [1] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 21 86 dd a0 00 00 Error: IDNF at LBA = 0x2186dda0 = 562486688
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 10 00 00 21 86 dd a0 40 00 3d+15:51:15.457 WRITE FPDMA QUEUED
61 00 00 00 20 00 00 18 1e 64 98 40 00 3d+15:51:15.449 WRITE FPDMA QUEUED
61 00 00 00 48 00 00 24 80 80 a0 40 00 3d+15:51:15.440 WRITE FPDMA QUEUED
61 00 00 00 18 00 00 24 00 32 80 40 00 3d+15:51:15.431 WRITE FPDMA QUEUED
61 00 00 00 18 00 00 23 80 67 d8 40 00 3d+15:51:15.422 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 44779 -
# 2 Short offline Completed without error 00% 44756 -
# 3 Short offline Completed without error 00% 44732 -
# 4 Short offline Completed without error 00% 44708 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 24 Celsius
Power Cycle Min/Max Temperature: 12/24 Celsius
Lifetime Min/Max Temperature: 10/53 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (14)
SCT Error Recovery Control:
Read: 100 (10.0 seconds)
Write: 100 (10.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 126 --- Lifetime Power-On Resets
0x01 0x010 4 45207 --- Power-on Hours
0x01 0x018 6 12523256080 --- Logical Sectors Written
0x01 0x020 6 31039985 --- Number of Write Commands
0x01 0x028 6 54225506715 --- Logical Sectors Read
0x01 0x030 6 146907177 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 45210 --- Spindle Motor Power-on Hours
0x03 0x010 4 45210 --- Head Flying Hours
0x03 0x018 4 1998 --- Head Load Events
0x03 0x020 4 1106 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink