mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
203 lines
9.6 KiB
Plaintext
203 lines
9.6 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Device Model: MM2000GEFRA
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 000c50 ...
|
|
Firmware Version: HPG8
|
|
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 7200 rpm
|
|
Form Factor: 2.5 inches
|
|
Device is: Not in smartctl database 7.3/5319
|
|
ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Wed Apr 20 15:41:22 2022 EEST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Disabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Unavailable
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 634) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 343) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 3) minutes.
|
|
SCT capabilities: (0x1025) SCT Status supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 069 064 044 - 7254096
|
|
3 Spin_Up_Time PO---- 092 092 070 - 0
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|
7 Seek_Error_Rate POSR-- 083 060 030 - 187072662
|
|
9 Power_On_Hours -O--CK 088 088 000 - 11112
|
|
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
|
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 251419498
|
|
194 Temperature_Celsius -O---K 041 062 000 - 41 (0 19 0 0 0)
|
|
196 Reallocated_Event_Count PO--CK 100 100 010 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x08 GPL R/O 2 Power Conditions log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x21 GPL R/O 1 Write stream error log
|
|
0x22 GPL R/O 1 Read stream error log
|
|
0x24 GPL R/O 512 Current Device Internal Status Data log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa1 GPL,SL VS 20 Device vendor specific log
|
|
0xa2 GPL VS 8160 Device vendor specific log
|
|
0xa8 GPL,SL VS 129 Device vendor specific log
|
|
0xa9 GPL,SL VS 1 Device vendor specific log
|
|
0xab GPL VS 1 Device vendor specific log
|
|
0xb0 GPL VS 8840 Device vendor specific log
|
|
0xb5 SL VS 1 Device vendor specific log
|
|
0xb6 GPL VS 16385 Device vendor specific log
|
|
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
|
0xc1 GPL,SL VS 10 Device vendor specific log
|
|
0xc3 GPL,SL VS 8 Device vendor specific log
|
|
0xd0 GPL VS 1 Device vendor specific log
|
|
0xd7 GPL VS 1 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 522 (0x020a)
|
|
Device State: Active (0)
|
|
Current Temperature: 41 Celsius
|
|
Power Cycle Min/Max Temperature: 41/46 Celsius
|
|
Lifetime Min/Max Temperature: 19/58 Celsius
|
|
Specified Max Operating Temperature: 60 Celsius
|
|
Under/Over Temperature Limit Count: 0/369
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 59 minutes
|
|
Min/Max recommended Temperature: 0/ 0 Celsius
|
|
Min/Max Temperature Limit: 0/ 0 Celsius
|
|
Temperature History Size (Index): 128 (10)
|
|
|
|
SCT Error Recovery Control command not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 61 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 11112 --- Power-on Hours
|
|
0x01 0x018 6 60506912 --- Logical Sectors Written
|
|
0x01 0x020 6 3889622 --- Number of Write Commands
|
|
0x01 0x028 6 202795926 --- Logical Sectors Read
|
|
0x01 0x030 6 509111 --- Number of Read Commands
|
|
0x01 0x038 6 - --- Date and Time TimeStamp
|
|
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
|
0x03 0x008 4 11107 --- Spindle Motor Power-on Hours
|
|
0x03 0x010 4 11107 --- Head Flying Hours
|
|
0x03 0x018 4 530 --- Head Load Events
|
|
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
|
0x03 0x028 4 0 --- Read Recovery Attempts
|
|
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
|
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
|
|
0x03 0x040 4 51 --- Number of High Priority Unload Events
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 41 --- Current Temperature
|
|
0x05 0x010 1 42 --- Average Short Term Temperature
|
|
0x05 0x018 1 41 --- Average Long Term Temperature
|
|
0x05 0x020 1 62 --- Highest Temperature
|
|
0x05 0x028 1 19 --- Lowest Temperature
|
|
0x05 0x030 1 49 --- Highest Average Short Term Temperature
|
|
0x05 0x038 1 35 --- Lowest Average Short Term Temperature
|
|
0x05 0x040 1 43 --- Highest Average Long Term Temperature
|
|
0x05 0x048 1 38 --- Lowest Average Long Term Temperature
|
|
0x05 0x050 4 10 --- Time in Over-Temperature
|
|
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
|
|
0x05 0x060 4 0 --- Time in Under-Temperature
|
|
0x05 0x068 1 13 --- Specified Minimum Operating Temperature
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 222 --- Number of Hardware Resets
|
|
0x06 0x010 4 179 --- Number of ASR Events
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
|