mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
235 lines
11 KiB
Plaintext
235 lines
11 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-STABLE-HBSD amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Device Model: WD2004FBYZ-23YC 03X3795 LENOVO
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 0014ee ...
|
|
Firmware Version: WH03
|
|
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: 7200 rpm
|
|
Form Factor: 3.5 inches
|
|
Device is: Not in smartctl database [for details use: -P showall]
|
|
ATA Version is: ACS-3 T13/2161-D revision 5
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Wed Mar 17 07:49:56 2021 CET
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Disabled
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 227) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 5) minutes.
|
|
SCT capabilities: (0x203d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
|
3 Spin_Up_Time POS--K 189 183 021 - 3533
|
|
4 Start_Stop_Count -O--CK 100 100 000 - 60
|
|
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
|
7 Seek_Error_Rate -OSR-K 100 200 000 - 0
|
|
9 Power_On_Hours -O--CK 074 074 000 - 19277
|
|
10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
|
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 60
|
|
16 Unknown_Attribute -O---K 004 196 000 - 228442516298
|
|
190 Airflow_Temperature_Cel -O---K 070 037 000 - 30 (4 97 36 30 0)
|
|
192 Power-Off_Retract_Count -O--CK 200 200 000 - 56
|
|
193 Load_Cycle_Count -O--CK 200 200 000 - 20
|
|
194 Temperature_Celsius -O---K 117 084 000 - 30 (Min/Max 19/63)
|
|
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
|
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
|
198 Offline_Uncorrectable ----CK 100 253 000 - 0
|
|
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 5 Comprehensive SMART error log
|
|
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x08 GPL R/O 2 Power Conditions log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x0a GPL R/W 8 Device Statistics Notification
|
|
0x0d GPL,SL R/O 8 LPS Mis-alignment log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|
0x24 GPL R/O 189 Current Device Internal Status Data log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa0-0xa3 GPL,SL VS 16 Device vendor specific log
|
|
0xa4 GPL,SL VS 1 Device vendor specific log
|
|
0xa5-0xa7 GPL,SL VS 16 Device vendor specific log
|
|
0xa8 GPL VS 65535 Device vendor specific log
|
|
0xa8 SL VS 16 Device vendor specific log
|
|
0xa9-0xaf GPL,SL VS 16 Device vendor specific log
|
|
0xb0 GPL,SL VS 1 Device vendor specific log
|
|
0xb1 GPL,SL VS 33 Device vendor specific log
|
|
0xb2-0xb6 GPL,SL VS 16 Device vendor specific log
|
|
0xb7 GPL,SL VS 39 Device vendor specific log
|
|
0xc0 GPL,SL VS 1 Device vendor specific log
|
|
0xdf GPL,SL VS 1 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 258 (0x0102)
|
|
Device State: Active (0)
|
|
Current Temperature: 30 Celsius
|
|
Power Cycle Min/Max Temperature: 30/36 Celsius
|
|
Lifetime Min/Max Temperature: 19/63 Celsius
|
|
Specified Max Operating Temperature: 60 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
Vendor specific:
|
|
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: 0/60 Celsius
|
|
Min/Max Temperature Limit: -41/85 Celsius
|
|
Temperature History Size (Index): 478 (278)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: 70 (7.0 seconds)
|
|
Write: 70 (7.0 seconds)
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 60 -D- Lifetime Power-On Resets
|
|
0x01 0x010 4 19277 -D- Power-on Hours
|
|
0x01 0x018 6 98934751972 -D- Logical Sectors Written
|
|
0x01 0x020 6 3305807599 -D- Number of Write Commands
|
|
0x01 0x028 6 129507767014 -D- Logical Sectors Read
|
|
0x01 0x030 6 824325276 -D- Number of Read Commands
|
|
0x01 0x038 6 677723264 -D- Date and Time TimeStamp
|
|
0x01 0x048 2 425 ND- Workload Utilization
|
|
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
|
0x03 0x008 4 19277 -D- Spindle Motor Power-on Hours
|
|
0x03 0x010 4 19277 -D- Head Flying Hours
|
|
0x03 0x018 4 77 -D- Head Load Events
|
|
0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors
|
|
0x03 0x028 4 0 -D- Read Recovery Attempts
|
|
0x03 0x030 4 0 -D- Number of Mechanical Start Failures
|
|
0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors
|
|
0x03 0x040 4 56 -D- Number of High Priority Unload Events
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 30 -D- Current Temperature
|
|
0x05 0x010 1 31 -D- Average Short Term Temperature
|
|
0x05 0x018 1 30 -D- Average Long Term Temperature
|
|
0x05 0x020 1 63 -D- Highest Temperature
|
|
0x05 0x028 1 21 -D- Lowest Temperature
|
|
0x05 0x030 1 55 -D- Highest Average Short Term Temperature
|
|
0x05 0x038 1 29 -D- Lowest Average Short Term Temperature
|
|
0x05 0x040 1 50 -D- Highest Average Long Term Temperature
|
|
0x05 0x048 1 30 -D- Lowest Average Long Term Temperature
|
|
0x05 0x050 4 1130 -D- Time in Over-Temperature
|
|
0x05 0x058 1 60 -D- Specified Maximum Operating Temperature
|
|
0x05 0x060 4 0 -D- Time in Under-Temperature
|
|
0x05 0x068 1 0 -D- Specified Minimum Operating Temperature
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 279 -D- Number of Hardware Resets
|
|
0x06 0x010 4 143 -D- Number of ASR Events
|
|
0x06 0x018 4 0 -D- Number of Interface CRC Errors
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x8000 4 0 Vendor specific
|
|
|
|
|
|
|