80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HD103/HD103SI/35C6DBCE8D11
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

347 lines
18 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F2 EG
Device Model: SAMSUNG HD103SI
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AG01118
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Thu Aug 29 19:21:55 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 38) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: (13053) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 218) minutes.
Conveyance self-test routine
recommended polling time: ( 23) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 095 051 - 94
3 Spin_Up_Time POS--- 082 082 011 - 6270
4 Start_Stop_Count -O--CK 096 096 000 - 4156
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 11148
9 Power_On_Hours -O--CK 092 092 000 - 38160
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 3
12 Power_Cycle_Count -O--CK 096 096 000 - 4156
13 Read_Soft_Error_Rate -OSR-- 100 095 000 - 94
183 Runtime_Bad_Block -O--CK 100 100 000 - 145
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 444
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 072 056 000 - 28 (Min/Max 19/28)
194 Temperature_Celsius -O---K 066 054 000 - 34 (Min/Max 19/34)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 82195
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 097 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 099 000 - 436
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 662 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 662 [5] occurred at disk power-on lifetime: 38159 hours (1589 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 2f 00 00 00 00 0a d1 40 00 at LBA = 0x00000ad1 = 2769
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 20 20 00 e0 00 00 00 70 66 20 40 00 00:03:07.940 READ FPDMA QUEUED
60 20 20 00 e0 00 00 00 70 64 20 40 00 00:03:07.940 READ FPDMA QUEUED
60 20 20 00 e0 00 00 00 00 0a 20 40 00 00:03:07.940 READ FPDMA QUEUED
60 20 20 00 e0 00 00 00 00 08 20 40 00 00:03:07.940 READ FPDMA QUEUED
60 20 20 00 01 00 00 00 00 08 00 40 00 00:03:05.710 READ FPDMA QUEUED
Error 661 [4] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 57 00 00 00 00 09 a9 40 00 at LBA = 0x000009a9 = 2473
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 f8 00 00 00 00 09 08 40 00 00:00:25.020 READ FPDMA QUEUED
60 00 00 00 78 00 00 00 00 08 88 40 00 00:00:25.020 READ FPDMA QUEUED
60 00 00 00 30 00 00 00 00 08 48 40 00 00:00:25.020 READ FPDMA QUEUED
60 00 00 00 10 00 00 00 00 08 28 40 00 00:00:25.020 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 00 08 10 40 00 00:00:25.020 READ FPDMA QUEUED
Error 660 [3] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 5f 00 00 74 70 65 a1 40 00 at LBA = 0x747065a1 = 1953523105
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 02 00 00 00 00 70 64 00 40 00 00:07:41.600 READ FPDMA QUEUED
60 00 00 01 f8 00 00 00 00 0a 08 40 00 00:07:41.600 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 00 09 f8 40 00 00:07:41.590 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 00 09 f0 40 00 00:07:41.590 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 00 09 e8 40 00 00:07:41.590 READ FPDMA QUEUED
Error 659 [2] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 17 00 00 00 00 08 e9 40 00 at LBA = 0x000008e9 = 2281
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 f8 00 00 00 00 09 08 40 00 00:07:40.880 READ FPDMA QUEUED
60 00 00 00 78 00 00 00 00 08 88 40 00 00:07:40.880 READ FPDMA QUEUED
60 00 00 00 30 00 00 00 00 08 48 40 00 00:07:40.880 READ FPDMA QUEUED
60 00 00 00 10 00 00 00 00 08 28 40 00 00:07:40.880 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 00 08 10 40 00 00:07:40.880 READ FPDMA QUEUED
Error 658 [1] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 00 00 00 00 00 08 0e 40 00 at LBA = 0x0000080e = 2062
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 00 00 08 08 40 00 00:07:40.160 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 00 08 00 40 00 00:07:40.130 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 70 67 f0 40 00 00:07:40.130 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 70 67 80 40 00 00:07:40.130 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 70 6b f8 40 00 00:07:40.130 READ FPDMA QUEUED
Error 657 [0] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 00 00 00 74 70 6a b6 40 00 at LBA = 0x74706ab6 = 1953524406
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 08 00 00 00 70 6a b0 40 00 00:07:39.480 READ FPDMA QUEUED
60 20 20 00 08 00 00 00 70 6a a8 40 00 00:07:39.480 READ FPDMA QUEUED
60 00 20 00 08 00 00 00 70 6a a0 40 00 00:07:39.480 READ FPDMA QUEUED
60 00 03 00 08 00 00 00 70 6a 98 40 00 00:07:39.480 READ FPDMA QUEUED
60 00 03 00 08 00 00 00 70 6a 90 40 00 00:07:39.480 READ FPDMA QUEUED
Error 656 [7] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 00 00 00 74 70 6a 86 40 00 at LBA = 0x74706a86 = 1953524358
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 03 00 08 00 00 00 70 6a 80 40 00 00:07:38.840 READ FPDMA QUEUED
60 00 da 00 08 00 00 00 70 6a 78 40 00 00:07:38.840 READ FPDMA QUEUED
60 00 10 00 08 00 00 00 70 6a 70 40 00 00:07:38.820 READ FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:07:38.820 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 00:07:38.820 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 655 [6] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 00 00 00 74 70 6a 76 40 00 at LBA = 0x74706a76 = 1953524342
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 00 70 6a 70 40 00 00:07:38.210 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 70 6a 68 40 00 00:07:38.210 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 70 6a 60 40 00 00:07:38.210 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 70 6a 58 40 00 00:07:38.210 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 70 6a 50 40 00 00:07:38.210 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 60% 38156 -
# 2 Short offline Completed without error 00% 38155 -
# 3 Short offline Completed without error 00% 38149 -
# 4 Short offline Completed without error 00% 38127 -
# 5 Short offline Completed without error 00% 38119 -
# 6 Short offline Completed without error 00% 38119 -
# 7 Short offline Interrupted (host reset) 10% 38119 -
# 8 Extended offline Completed: read failure 80% 38118 281020847
# 9 Extended offline Interrupted (host reset) 80% 38116 -
#10 Extended offline Aborted by host 80% 38114 -
#11 Short offline Completed without error 00% 38112 -
#12 Extended offline Aborted by host 90% 38112 -
#13 Short offline Completed without error 00% 38111 -
#14 Extended offline Aborted by host 90% 38110 -
#15 Extended offline Completed: read failure 80% 38108 280967369
#16 Short offline Completed without error 00% 38107 -
#17 Short offline Completed without error 00% 38105 -
#18 Short offline Completed without error 00% 38104 -
#19 Extended offline Completed: read failure 80% 38102 280967369
#20 Extended offline Aborted by host 80% 38102 -
#21 Short offline Completed without error 00% 38100 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: --/34 Celsius
Lifetime Min/Max Temperature: --/46 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (46)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 35 Device-to-host register FISes sent due to a COMRESET
0x0001 2 3 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 35 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink