80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HD103/HD103SI/9E56EBAE5BAE
Andrey Ponomarenko d96e63400c Update of reports (new: 3084, modified: 0)
2021-05-18 23:01:35 +03:00

343 lines
18 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F2 EG
Device Model: SAMSUNG HD103SI
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AG01118
User Capacity: 1,000,203,804,160 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Wed Feb 10 06:20:08 2021 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12911) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 216) minutes.
Conveyance self-test routine
recommended polling time: ( 23) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 081 081 011 - 6460
4 Start_Stop_Count -O--CK 092 092 000 - 8299
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 10708
9 Power_On_Hours -O--CK 095 095 000 - 23907
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 2
12 Power_Cycle_Count -O--CK 092 092 000 - 8175
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 2094
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 081 041 000 - 19 (Min/Max 15/19)
194 Temperature_Celsius -O---K 076 037 000 - 24 (255 255 24 15 0)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 10844
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 12
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 12 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12 [3] occurred at disk power-on lifetime: 23828 hours (992 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 40 00 00 00 00 00 09 70 1f 40 00 at LBA = 0x0009701f = 618527
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 20 00 00 00 09 70 00 40 00 01:56:57.590 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 08 01:56:57.590 FLUSH CACHE EXT
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 01:52:21.040 SMART RETURN STATUS
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 01:52:21.040 SMART READ DATA
b0 00 d1 00 01 00 00 00 c2 4f 00 00 08 01:52:21.040 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
Error 11 [2] occurred at disk power-on lifetime: 23818 hours (992 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 50 00 00 00 00 00 09 70 03 40 00 at LBA = 0x00097003 = 618499
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 02 00 00 00 09 70 02 40 00 01:57:55.540 READ FPDMA QUEUED
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 01:51:46.310 SMART RETURN STATUS
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 01:51:46.310 SMART READ DATA
b0 00 d1 00 01 00 00 00 c2 4f 00 00 08 01:51:46.310 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
ec 00 00 00 01 00 00 00 00 00 00 00 08 01:51:46.300 IDENTIFY DEVICE
Error 10 [1] occurred at disk power-on lifetime: 23816 hours (992 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 40 00 00 00 00 00 09 70 1f 40 00 at LBA = 0x0009701f = 618527
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 20 00 00 00 09 70 00 40 00 00:15:56.030 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:15:56.030 FLUSH CACHE EXT
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 00:11:46.750 SMART RETURN STATUS
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 00:11:46.750 SMART READ DATA
b0 00 d1 00 01 00 00 00 c2 4f 00 00 08 00:11:46.750 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
Error 9 [0] occurred at disk power-on lifetime: 23797 hours (991 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 40 00 00 00 00 00 10 10 1f 40 00 at LBA = 0x0010101f = 1052703
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 20 00 00 00 10 10 00 40 00 03:11:37.380 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 08 03:11:37.380 FLUSH CACHE EXT
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 03:01:42.990 SMART RETURN STATUS
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 03:01:42.990 SMART READ DATA
b0 00 d1 00 01 00 00 00 c2 4f 00 00 08 03:01:42.990 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
Error 8 [7] occurred at disk power-on lifetime: 23791 hours (991 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 40 00 00 00 00 00 10 10 1f 40 00 at LBA = 0x0010101f = 1052703
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 20 00 00 00 10 10 00 40 00 08:13:46.940 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 08 08:13:46.940 FLUSH CACHE EXT
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 08:11:23.750 SMART RETURN STATUS
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 08:11:23.750 SMART READ DATA
b0 00 d1 00 01 00 00 00 c2 4f 00 00 08 08:11:23.750 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
Error 7 [6] occurred at disk power-on lifetime: 23775 hours (990 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 50 00 00 00 00 00 10 10 03 40 00 at LBA = 0x00101003 = 1052675
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 02 00 00 00 10 10 02 40 00 00:12:41.090 READ FPDMA QUEUED
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 00:05:50.180 SMART RETURN STATUS
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 00:05:50.180 SMART READ DATA
b0 00 d1 00 01 00 00 00 c2 4f 00 00 08 00:05:50.180 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
ec 00 00 00 01 00 00 00 00 00 00 00 08 00:05:50.170 IDENTIFY DEVICE
Error 6 [5] occurred at disk power-on lifetime: 23742 hours (989 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 40 00 00 00 00 00 10 08 1f 40 00 at LBA = 0x0010081f = 1050655
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 20 00 00 00 10 08 00 40 00 04:07:08.620 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 08 04:07:08.620 FLUSH CACHE EXT
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 04:04:29.130 SMART RETURN STATUS
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 04:04:29.130 SMART READ DATA
b0 00 d1 00 01 00 00 00 c2 4f 00 00 08 04:04:29.130 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
Error 5 [4] occurred at disk power-on lifetime: 23712 hours (988 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 40 00 00 00 00 00 10 08 1f 40 00 at LBA = 0x0010081f = 1050655
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 20 00 00 00 10 08 00 40 00 00:26:51.420 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:26:51.420 FLUSH CACHE EXT
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 00:21:33.090 SMART RETURN STATUS
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 00:21:33.090 SMART READ DATA
b0 00 d1 00 01 00 00 00 c2 4f 00 00 08 00:21:33.090 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 23893 -
# 2 Short offline Completed without error 00% 23888 -
# 3 Short offline Completed without error 00% 23879 -
# 4 Short offline Completed without error 90% 0 -
# 5 Short offline Completed without error 00% 23672 -
# 6 Short offline Completed without error 00% 23669 -
# 7 Short offline Completed without error 00% 23667 -
# 8 Short offline Completed without error 00% 23662 -
# 9 Short offline Completed without error 00% 23657 -
#10 Short offline Completed without error 00% 23651 -
#11 Short offline Completed without error 00% 23645 -
#12 Short offline Completed without error 00% 23617 -
#13 Extended offline Aborted by host 60% 23615 -
#14 Short offline Completed without error 00% 23611 -
#15 Extended offline Aborted by host 70% 23594 -
#16 Short offline Aborted by host 60% 23575 -
#17 Short offline Completed without error 00% 23568 -
#18 Short offline Completed without error 00% 23563 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 24 Celsius
Power Cycle Min/Max Temperature: --/24 Celsius
Lifetime Min/Max Temperature: --/63 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (19)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink