80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HD154/HD154UI/77DFF2ABBC1A
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

322 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F2 EG
Device Model: SAMSUNG HD154UI
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AG01118
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Tue Jun 21 11:33:49 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19095) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 319) minutes.
Conveyance self-test routine
recommended polling time: ( 33) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 063 063 011 - 11930
4 Start_Stop_Count -O--CK 100 100 000 - 88
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 12469
9 Power_On_Hours -O--CK 088 088 000 - 62406
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 88
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 068 068 000 - 32 (Min/Max 17/32)
194 Temperature_Celsius -O---K 066 066 000 - 34 (Min/Max 8/45)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1507667744
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 099 099 000 - 1031
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 1031 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1031 [6] occurred at disk power-on lifetime: 22966 hours (956 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 48 00 31 00 00 6f 01 e8 8c 40 00 at LBA = 0x6f01e88c = 1862396044
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 ab 00 00 00 01 e8 12 40 00 00:14:29.670 WRITE FPDMA QUEUED
61 00 00 01 00 00 00 00 01 e7 12 40 00 00:14:29.660 WRITE FPDMA QUEUED
61 00 00 00 56 00 00 00 01 c4 3c 40 00 00:14:29.650 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 08 00:14:24.940 FLUSH CACHE EXT
61 00 00 00 02 00 00 ff a8 3a a2 40 00 00:14:24.940 WRITE FPDMA QUEUED
Error 1030 [5] occurred at disk power-on lifetime: 22966 hours (956 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 05 00 00 08 a4 bf 51 40 00 at LBA = 0x08a4bf51 = 145014609
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 56 00 00 00 a4 bf 00 40 00 6d+15:13:15.954 READ FPDMA QUEUED
60 00 00 00 55 00 00 00 a4 be ab 40 00 6d+15:13:15.944 READ FPDMA QUEUED
60 00 00 00 01 00 00 00 01 de 9c 40 00 6d+15:13:15.944 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 08 6d+15:13:15.784 FLUSH CACHE EXT
61 00 00 00 02 00 00 ff a8 3a aa 40 00 6d+15:13:15.784 WRITE FPDMA QUEUED
Error 1029 [4] occurred at disk power-on lifetime: 15699 hours (654 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 44 00 00 1c 90 08 00 40 00 at LBA = 0x1c900800 = 479201280
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 55 00 00 00 90 07 ef 40 00 4d+19:01:52.940 READ FPDMA QUEUED
60 00 00 00 04 00 00 00 09 5f a1 40 00 4d+19:01:52.930 READ FPDMA QUEUED
60 00 00 00 04 00 00 00 09 f8 4c 40 00 4d+19:01:52.910 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 08 4d+11:37:04.090 FLUSH CACHE EXT
61 00 00 00 02 00 00 ff a8 3a b8 40 00 4d+11:37:04.090 WRITE FPDMA QUEUED
Error 1028 [3] occurred at disk power-on lifetime: 8754 hours (364 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 44 00 00 51 06 8e 1a 40 00 at LBA = 0x51068e1a = 1359384090
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 55 00 00 00 06 8e 09 40 00 1d+21:38:38.870 READ FPDMA QUEUED
60 00 00 00 04 00 00 00 00 bc f7 40 00 1d+21:38:38.850 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+21:38:37.680 FLUSH CACHE EXT
61 00 00 00 02 00 00 ff a8 3a a0 40 00 1d+21:38:37.680 WRITE FPDMA QUEUED
61 00 00 00 02 00 00 ff a8 38 a0 40 00 1d+21:38:37.680 WRITE FPDMA QUEUED
Error 1027 [2] occurred at disk power-on lifetime: 8753 hours (364 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 44 00 00 53 1a 35 13 40 00 at LBA = 0x531a3513 = 1394226451
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 55 00 00 00 1a 35 02 40 00 1d+20:58:06.450 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+20:58:04.760 FLUSH CACHE EXT
61 00 00 00 02 00 00 ff a8 3a e0 40 00 1d+20:58:04.750 WRITE FPDMA QUEUED
61 00 00 00 02 00 00 ff a8 38 e0 40 00 1d+20:58:04.750 WRITE FPDMA QUEUED
61 00 00 00 02 00 00 00 00 04 e0 40 00 1d+20:58:04.750 WRITE FPDMA QUEUED
Error 1026 [1] occurred at disk power-on lifetime: 8708 hours (362 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 00 00 00 39 16 21 54 40 00 at LBA = 0x39162154 = 957751636
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 55 00 00 00 16 21 01 40 00 00:04:21.000 READ FPDMA QUEUED
60 00 00 00 55 00 00 00 15 a7 3a 40 00 00:04:20.990 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 08 00:04:20.980 FLUSH CACHE EXT
61 00 00 00 56 00 00 00 02 91 62 40 00 00:04:20.950 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 08 00:04:20.920 FLUSH CACHE EXT
Error 1025 [0] occurred at disk power-on lifetime: 8683 hours (361 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 34 00 00 44 09 08 a8 40 00 at LBA = 0x440908a8 = 1141442728
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 55 00 00 00 09 08 87 40 00 19:58:36.000 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 08 19:58:35.990 READ LOG EXT
Error 1024 [7] occurred at disk power-on lifetime: 8683 hours (361 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 4a 00 34 00 00 44 09 08 a8 40 00 at LBA = 0x440908a8 = 1141442728
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 55 00 00 00 09 08 87 40 00 19:58:35.990 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 08 19:58:35.980 READ LOG EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 51871 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: --/45 Celsius
Lifetime Min/Max Temperature: --/46 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (123)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink