mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
208 lines
9.5 KiB
Plaintext
208 lines
9.5 KiB
Plaintext
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
|
|
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: SAMSUNG SpinPoint F2 EG
|
|
Device Model: SAMSUNG HD154UI
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 0024e9 ...
|
|
Firmware Version: 1AG01118
|
|
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
|
|
Local Time is: Fri Feb 19 10:59:38 2021 EST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Disabled
|
|
APM feature is: Disabled
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: (20381) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 341) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 35) minutes.
|
|
SCT capabilities: (0x003f) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
|
3 Spin_Up_Time POS--- 070 070 011 - 9820
|
|
4 Start_Stop_Count -O--CK 095 095 000 - 4964
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|
7 Seek_Error_Rate POSR-- 100 100 051 - 0
|
|
8 Seek_Time_Performance P-S--K 100 100 015 - 0
|
|
9 Power_On_Hours -O--CK 096 096 000 - 19128
|
|
10 Spin_Retry_Count PO--CK 100 100 051 - 0
|
|
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
|
|
12 Power_Cycle_Count -O--CK 098 098 000 - 1871
|
|
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
|
|
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
|
184 End-to-End_Error PO--CK 100 100 000 - 0
|
|
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|
188 Command_Timeout -O--CK 100 100 000 - 0
|
|
190 Airflow_Temperature_Cel -O---K 088 051 000 - 12 (Min/Max 12/12)
|
|
194 Temperature_Celsius -O---K 086 050 000 - 14 (Min/Max 12/14)
|
|
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 27177
|
|
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
|
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 1
|
|
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
|
|
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 2 Comprehensive SMART error log
|
|
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
|
0x04 GPL R/O 2 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 2 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x20 GPL R/O 2 Streaming performance log [OBS-8]
|
|
0x21 GPL R/O 1 Write stream error log
|
|
0x22 GPL R/O 1 Read stream error log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
|
Device Error Count: 1
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 1 [0] occurred at disk power-on lifetime: 206 hours (8 days + 14 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
84 -- 51 00 04 00 00 00 5b 1c 24 40 00 Error: ICRC, ABRT 4 sectors at LBA = 0x005b1c24 = 5970980
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
35 00 42 00 10 00 00 00 5b 1c 18 40 00 1d+22:26:03.800 WRITE DMA EXT
|
|
35 00 42 00 10 00 00 00 5b 1c 08 40 00 1d+22:26:03.790 WRITE DMA EXT
|
|
35 00 42 00 10 00 00 00 5b 1b f8 40 00 1d+22:26:03.790 WRITE DMA EXT
|
|
35 00 42 00 10 00 00 00 5b 1b e8 40 00 1d+22:26:03.790 WRITE DMA EXT
|
|
35 00 42 00 10 00 00 00 5b 1b d8 40 00 1d+22:26:03.790 WRITE DMA EXT
|
|
|
|
SMART Extended Self-test Log Version: 1 (2 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 2
|
|
SCT Version (vendor specific): 256 (0x0100)
|
|
Device State: Active (0)
|
|
Current Temperature: 14 Celsius
|
|
Power Cycle Min/Max Temperature: --/14 Celsius
|
|
Lifetime Min/Max Temperature: --/50 Celsius
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: -4/72 Celsius
|
|
Min/Max Temperature Limit: -9/77 Celsius
|
|
Temperature History Size (Index): 128 (48)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: Disabled
|
|
Write: Disabled
|
|
|
|
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
|
|
Read Device Statistics page 0x00 failed
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|
|
|
|
|