mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
116 lines
5.6 KiB
Plaintext
116 lines
5.6 KiB
Plaintext
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)
|
|
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: SAMSUNG SpinPoint F4 EG (AF)
|
|
Device Model: SAMSUNG HD204UI
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 0024e9 ...
|
|
Firmware Version: 1AQ10001
|
|
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: 5400 rpm
|
|
Form Factor: 3.5 inches
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA8-ACS T13/1699-D revision 6
|
|
SATA Version is: SATA 2.6, 3.0 Gb/s
|
|
Local Time is: Tue Oct 20 17:31:47 2020 MST
|
|
|
|
==> WARNING: Using smartmontools or hdparm with this
|
|
drive may result in data loss due to a firmware bug.
|
|
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
|
|
Buggy and fixed firmware report same version number!
|
|
See the following web pages for details:
|
|
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
|
|
https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks
|
|
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: FAILED!
|
|
Drive failure expected in less than 24 hours. SAVE ALL DATA.
|
|
Warning: This result is based on an Attribute check.
|
|
See vendor-specific Attribute list for failed Attributes.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: (19620) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 327) minutes.
|
|
SCT capabilities: (0x003f) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail Always FAILING_NOW 40313
|
|
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
|
|
3 Spin_Up_Time 0x0023 068 058 025 Pre-fail Always - 9869
|
|
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2050
|
|
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
|
|
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
|
|
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
|
|
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 61358
|
|
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
|
|
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
|
|
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1769
|
|
181 Program_Fail_Cnt_Total 0x0022 095 095 000 Old_age Always - 113273096
|
|
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 1210
|
|
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
|
|
194 Temperature_Celsius 0x0002 064 055 000 Old_age Always - 31 (Min/Max 15/45)
|
|
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
|
|
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
|
|
197 Current_Pending_Sector 0x0032 252 100 000 Old_age Always - 0
|
|
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
|
|
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
|
|
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 309
|
|
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
|
|
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2136
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 0
|
|
Note: revision number not 1 implies that no selective self-test has ever been run
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Completed [00% left] (0-65535)
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
|
|
|