80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HD204/HD204UI/BAB410110674
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

353 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F4 EG (AF)
Device Model: SAMSUNG HD204UI
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AQ10001
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Mar 22 22:09:18 2024 CET
==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 0 (vendor specific), recommended: 254
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (20220) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 337) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 16
2 Throughput_Performance -OS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 066 064 025 - 10502
4 Start_Stop_Count -O--CK 001 001 000 - 190352
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 83948
10 Spin_Retry_Count -O--CK 252 252 051 - 0
11 Calibration_Retry_Count -O--CK 252 252 000 - 0
12 Power_Cycle_Count -O--CK 005 005 000 - 96785
181 Program_Fail_Cnt_Total -O---K 096 096 000 - 88073638
191 G-Sense_Error_Rate -O---K 100 100 000 - 2565
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 064 046 000 - 26 (Min/Max 16/54)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 14
223 Load_Retry_Count -O--CK 252 252 000 - 0
225 Load_Cycle_Count -O--CK 082 082 000 - 190352
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 17 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 17 [0] occurred at disk power-on lifetime: 36153 hours (1506 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 bb da ec af 40 00 Error: UNC at LBA = 0xbbdaecaf = 3151686831
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 bb da ec af 40 00 00:00:29.520 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec af 40 00 00:00:29.582 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 28 00 00:00:29.582 READ LOG EXT
60 00 00 00 01 00 00 bb da ec ae 40 00 00:00:29.520 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec ae 40 00 00:00:29.578 READ FPDMA QUEUED
Error 16 [7] occurred at disk power-on lifetime: 36153 hours (1506 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 bb da ec ae 40 00 Error: UNC at LBA = 0xbbdaecae = 3151686830
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 bb da ec ae 40 00 00:00:29.520 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec ae 40 00 00:00:29.578 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 28 00 00:00:29.578 READ LOG EXT
60 00 00 00 01 00 00 bb da ec ad 40 00 00:00:29.520 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec ad 40 00 00:00:29.576 READ FPDMA QUEUED
Error 15 [6] occurred at disk power-on lifetime: 36153 hours (1506 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 bb da ec ad 40 00 Error: UNC at LBA = 0xbbdaecad = 3151686829
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 bb da ec ad 40 00 00:00:29.520 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec ad 40 00 00:00:29.576 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 28 00 00:00:29.576 READ LOG EXT
60 00 00 00 01 00 00 bb da ec ac 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec ac 40 00 00:00:29.574 READ FPDMA QUEUED
Error 14 [5] occurred at disk power-on lifetime: 36153 hours (1506 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 bb da ec ac 40 00 Error: UNC at LBA = 0xbbdaecac = 3151686828
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 bb da ec ac 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec ac 40 00 00:00:29.574 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 28 00 00:00:29.574 READ LOG EXT
60 00 00 00 01 00 00 bb da ec ab 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec ab 40 00 00:00:29.572 READ FPDMA QUEUED
Error 13 [4] occurred at disk power-on lifetime: 36153 hours (1506 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 bb da ec ab 40 00 Error: UNC at LBA = 0xbbdaecab = 3151686827
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 bb da ec ab 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec ab 40 00 00:00:29.572 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 28 00 00:00:29.572 READ LOG EXT
60 00 00 00 01 00 00 bb da ec aa 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec aa 40 00 00:00:29.569 READ FPDMA QUEUED
Error 12 [3] occurred at disk power-on lifetime: 36153 hours (1506 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 bb da ec aa 40 00 Error: UNC at LBA = 0xbbdaecaa = 3151686826
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 bb da ec aa 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec aa 40 00 00:00:29.569 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 28 00 00:00:29.569 READ LOG EXT
60 00 00 00 01 00 00 bb da ec a9 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec a9 40 00 00:00:29.565 READ FPDMA QUEUED
Error 11 [2] occurred at disk power-on lifetime: 36153 hours (1506 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 bb da ec a9 40 00 Error: UNC at LBA = 0xbbdaeca9 = 3151686825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 bb da ec a9 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec a9 40 00 00:00:29.565 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 28 00 00:00:29.565 READ LOG EXT
60 00 00 00 01 00 00 bb da ec a8 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec a8 40 00 00:00:29.561 READ FPDMA QUEUED
Error 10 [1] occurred at disk power-on lifetime: 36153 hours (1506 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 bb da ec a8 40 00 Error: UNC at LBA = 0xbbdaeca8 = 3151686824
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 bb da ec a8 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec a8 40 00 00:00:29.561 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 28 00 00:00:29.561 READ LOG EXT
60 00 00 00 01 00 00 bb da ec a7 40 00 00:00:29.514 READ FPDMA QUEUED
60 00 00 00 01 00 00 bb da ec a7 40 00 00:00:29.556 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 26 Celsius
Power Cycle Min/Max Temperature: 20/26 Celsius
Lifetime Min/Max Temperature: 16/62 Celsius
Specified Max Operating Temperature: 80 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (123)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 0 Vendor specific
0x8e01 4 0 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 0 Vendor specific
0x8e07 4 0 Vendor specific
0x8e08 4 0 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 0 Vendor specific
0x8e0b 4 0 Vendor specific
0x8e0c 4 0 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 0 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 0 Vendor specific
0x8e11 4 0 Vendor specific
View Git Blame Copy Permalink