80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HD321/HD321KJ/9C16BBC4C293
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

322 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint T166
Device Model: SAMSUNG HD321KJ
Serial Number: --
LU WWN Device Id: 5 0000f0 ...
Firmware Version: CP100-10
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 3b
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Fri May 13 21:53:47 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 5767) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 99) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 253 100 051 - 0
3 Spin_Up_Time POS--- 100 100 015 - 5632
4 Start_Stop_Count -O--CK 082 082 000 - 18417
5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0
7 Seek_Error_Rate POSR-- 253 253 051 - 0
8 Seek_Time_Performance P-S--K 253 253 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 25352
10 Spin_Retry_Count PO--CK 253 253 051 - 0
11 Calibration_Retry_Count -O--C- 253 100 000 - 0
12 Power_Cycle_Count -O--CK 090 090 000 - 10264
187 Reported_Uncorrect -O--CK 089 089 000 - 2949132
188 Command_Timeout -O--CK 253 253 000 - 0
190 Airflow_Temperature_Cel -O---K 062 053 000 - 38
194 Temperature_Celsius -O---K 124 097 000 - 38
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 17948
196 Reallocated_Event_Count -O--CK 253 253 000 - 0
197 Total_Pending_Sectors -O--C- 100 100 000 - 1
198 Offline_Uncorrectable ----CK 253 253 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-- 253 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0
202 Data_Address_Mark_Errs -O--CK 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Invalid Error Log index = 0x0000, trying reserved byte (0x08) instead
Device Error Count: 1224 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1224 [7] occurred at disk power-on lifetime: 18692 hours (778 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 02 13 e6 b0 e0 00 Error: UNC 8 sectors at LBA = 0x0213e6b0 = 34858672
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 02 13 e6 b0 e0 00 00:37:29.875 READ DMA EXT
25 00 00 00 40 00 00 0e d9 56 d8 e0 00 00:37:27.000 READ DMA EXT
25 00 00 00 40 00 00 0e d9 52 f0 e0 00 00:37:27.000 READ DMA EXT
35 00 00 00 10 00 00 00 03 4c 28 e0 00 00:37:27.000 WRITE DMA EXT
35 00 00 00 12 00 00 01 03 e7 65 e0 00 00:37:27.000 WRITE DMA EXT
Error 1223 [6] occurred at disk power-on lifetime: 18692 hours (778 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 00 02 13 e6 a0 e0 00 Error: UNC 32 sectors at LBA = 0x0213e6a0 = 34858656
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 02 13 e6 a0 e0 00 00:37:25.125 READ DMA EXT
25 00 00 00 20 00 00 17 8c 2f e0 e0 00 00:37:22.313 READ DMA EXT
25 00 00 00 80 00 00 0d a8 87 48 e0 00 00:37:22.313 READ DMA EXT
25 00 00 00 18 00 00 00 1c c1 e8 e0 00 00:37:22.250 READ DMA EXT
25 00 00 00 80 00 00 00 1c c1 68 e0 00 00:37:22.250 READ DMA EXT
Error 1222 [5] occurred at disk power-on lifetime: 18674 hours (778 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 02 13 e6 b0 e0 00 Error: UNC 8 sectors at LBA = 0x0213e6b0 = 34858672
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 02 13 e6 b0 e0 00 00:49:45.625 READ DMA EXT
25 00 00 00 08 00 00 00 c4 35 10 e0 00 00:49:42.813 READ DMA EXT
ea 00 00 00 00 b0 a3 d7 00 00 00 e0 00 00:49:42.750 FLUSH CACHE EXT
35 00 00 00 08 00 00 17 b0 a3 d0 e0 00 00:49:42.750 WRITE DMA EXT
25 00 00 00 03 00 00 00 d7 6d d8 e0 00 00:49:42.750 READ DMA EXT
Error 1221 [4] occurred at disk power-on lifetime: 18674 hours (778 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 00 02 13 e6 a0 e0 00 Error: UNC 32 sectors at LBA = 0x0213e6a0 = 34858656
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 02 13 e6 a0 e0 00 00:49:42.438 READ DMA EXT
25 00 00 00 08 00 00 00 38 d8 50 e0 00 00:49:39.625 READ DMA EXT
25 00 00 00 08 00 00 0e f9 6a 00 e0 00 00:49:39.625 READ DMA EXT
25 00 00 00 80 00 00 08 17 e1 a0 e0 00 00:49:39.563 READ DMA EXT
35 00 00 00 20 00 00 0f c2 ef e0 e0 00 00:49:39.563 WRITE DMA EXT
Error 1220 [3] occurred at disk power-on lifetime: 18658 hours (777 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 02 13 e6 b0 e0 00 Error: UNC 8 sectors at LBA = 0x0213e6b0 = 34858672
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 02 13 e6 b0 e0 00 02:05:42.313 READ DMA EXT
25 00 00 00 40 00 00 11 3f 17 20 e0 00 02:05:39.500 READ DMA EXT
25 00 00 00 08 00 00 0d a8 90 70 e0 00 02:05:39.500 READ DMA EXT
25 00 00 00 08 00 00 0e 80 87 60 e0 00 02:05:39.500 READ DMA EXT
25 00 00 00 08 00 00 0e 80 87 58 e0 00 02:05:39.500 READ DMA EXT
Error 1219 [2] occurred at disk power-on lifetime: 18658 hours (777 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 00 02 13 e6 a0 e0 00 Error: UNC 32 sectors at LBA = 0x0213e6a0 = 34858656
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 02 13 e6 a0 e0 00 02:05:38.750 READ DMA EXT
25 00 00 00 08 00 00 0e 5a 3f 20 e0 00 02:05:35.938 READ DMA EXT
25 00 00 00 08 00 00 0f 57 d5 b0 e0 00 02:05:35.938 READ DMA EXT
25 00 00 00 08 00 00 0e 5a 3f 10 e0 00 02:05:35.938 READ DMA EXT
25 00 00 00 08 00 00 0e 5a 38 78 e0 00 02:05:35.938 READ DMA EXT
Error 1218 [1] occurred at disk power-on lifetime: 18658 hours (777 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 02 13 e6 b0 e0 00 Error: UNC 8 sectors at LBA = 0x0213e6b0 = 34858672
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 02 13 e6 b0 e0 00 01:39:54.438 READ DMA EXT
35 00 00 00 10 00 00 18 a3 27 60 e0 00 01:39:51.563 WRITE DMA EXT
35 00 00 00 20 00 00 0c f6 40 c0 e0 00 01:39:51.563 WRITE DMA EXT
25 00 00 00 08 00 00 02 13 e6 a8 e0 00 01:39:51.563 READ DMA EXT
25 00 00 00 08 00 00 14 91 85 60 e0 00 01:39:51.563 READ DMA EXT
Error 1217 [0] occurred at disk power-on lifetime: 18658 hours (777 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 00 02 13 e6 a0 e0 00 Error: UNC 32 sectors at LBA = 0x0213e6a0 = 34858656
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 02 13 e6 a0 e0 00 01:39:51.250 READ DMA EXT
25 00 00 00 08 00 00 14 91 85 58 e0 00 01:39:48.375 READ DMA EXT
25 00 00 00 c0 00 00 14 91 7e d8 e0 00 01:39:48.375 READ DMA EXT
25 00 00 00 80 00 00 14 91 7e 58 e0 00 01:39:48.375 READ DMA EXT
25 00 00 00 70 00 00 14 91 7d e8 e0 00 01:39:48.375 READ DMA EXT
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 15500 34858675
# 2 Short offline Completed without error 00% 7772 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 17/38 Celsius
Lifetime Min/Max Temperature: 10/48 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (117)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8001 2 0 Vendor specific
View Git Blame Copy Permalink