80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HD322/HD322HJ/1781E38E584F
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

325 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD322HJ
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AG01118
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Tue Nov 12 11:00:11 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4636) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 78) minutes.
Conveyance self-test routine
recommended polling time: ( 9) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 085 085 011 - 5420
4 Start_Stop_Count -O--CK 096 096 000 - 3919
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 253 253 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 0
9 Power_On_Hours -O--CK 099 099 000 - 3702
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 271
12 Power_Cycle_Count -O--CK 096 096 000 - 3917
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 077 064 000 - 23 (Min/Max 16/23)
194 Temperature_Celsius -O---K 073 064 000 - 27 (Min/Max 16/27)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 61883
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 113
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 113 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 113 [0] occurred at disk power-on lifetime: 3701 hours (154 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 01 d8 00 00 00 48 ba e8 40 00 00:30:53.710 WRITE FPDMA QUEUED
ca 00 00 00 4e 00 00 00 09 17 44 41 08 00:30:53.710 WRITE DMA
60 00 00 00 18 00 00 00 59 1b 68 40 00 00:30:53.580 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 a4 23 d0 40 00 00:30:53.580 READ FPDMA QUEUED
61 00 00 00 40 00 00 00 09 16 d0 40 00 00:30:53.580 WRITE FPDMA QUEUED
Error 112 [7] occurred at disk power-on lifetime: 3701 hours (154 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 01 08 00 00 00 48 b8 e8 40 00 00:29:53.120 WRITE FPDMA QUEUED
ca 00 00 00 6d 00 00 00 09 14 d4 41 08 00:29:53.120 WRITE DMA
60 00 00 00 08 00 00 00 d2 8a d0 40 00 00:29:53.090 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 a4 23 b0 40 00 00:29:53.090 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 d2 91 70 40 00 00:29:53.090 READ FPDMA QUEUED
Error 111 [6] occurred at disk power-on lifetime: 3692 hours (153 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 c0 00 00 00 7e d7 e8 40 08 00:16:00.500 WRITE DMA
61 00 00 01 00 00 00 00 7e d6 e8 40 00 00:16:00.490 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 7e d6 a8 40 00 00:16:00.490 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 00 7e d6 a0 40 00 00:16:00.490 WRITE FPDMA QUEUED
61 00 00 00 18 00 00 00 7e d6 88 40 00 00:16:00.490 WRITE FPDMA QUEUED
Error 110 [5] occurred at disk power-on lifetime: 3692 hours (153 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 10 00 00 00 7e c5 58 40 00 at LBA = 0x007ec558 = 8308056
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 20 00 00 00 7e c5 28 40 00 00:14:59.930 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 00 7e c5 20 40 00 00:14:59.930 WRITE FPDMA QUEUED
61 00 00 00 38 00 00 00 7e c4 e8 40 00 00:14:59.930 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 7e c4 a8 40 00 00:14:59.930 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 00 7e c4 a0 40 00 00:14:59.930 WRITE FPDMA QUEUED
Error 109 [4] occurred at disk power-on lifetime: 3692 hours (153 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 10 00 00 00 08 bd f0 40 08 00:13:59.540 WRITE DMA
61 00 00 00 40 00 00 00 d2 f9 68 40 00 00:13:59.530 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 9e 6b a8 40 00 00:13:59.530 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 9e 6b 68 40 00 00:13:59.530 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 8a e1 e8 40 00 00:13:59.530 WRITE FPDMA QUEUED
Error 108 [3] occurred at disk power-on lifetime: 3692 hours (153 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 40 00 00 00 63 ce a8 40 00 00:12:59.200 WRITE FPDMA QUEUED
ca 00 00 00 2f 00 00 00 63 ce fa 43 08 00:12:59.200 WRITE DMA
61 00 00 00 08 00 00 00 64 6a e8 40 00 00:12:59.200 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 63 ce a8 40 00 00:12:59.200 WRITE FPDMA QUEUED
60 00 00 00 40 00 00 00 63 ce a8 40 00 00:12:59.200 READ FPDMA QUEUED
Error 107 [2] occurred at disk power-on lifetime: 3691 hours (153 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 18 00 00 00 7e e7 48 40 08 00:22:15.490 WRITE DMA
61 00 00 00 20 00 00 00 7e e7 28 40 00 00:22:15.480 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 7e e6 e8 40 00 00:22:15.480 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 7e e6 a8 40 00 00:22:15.480 WRITE FPDMA QUEUED
61 00 00 00 38 00 00 00 7e e6 68 40 00 00:22:15.480 WRITE FPDMA QUEUED
Error 106 [1] occurred at disk power-on lifetime: 3691 hours (153 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 10 00 00 00 7e d8 d8 40 08 00:21:14.990 WRITE DMA
61 00 00 00 30 00 00 00 7e d8 a8 40 00 00:21:14.980 WRITE FPDMA QUEUED
61 00 00 00 c0 00 00 00 7e d7 e8 40 00 00:21:14.980 WRITE FPDMA QUEUED
61 00 00 01 00 00 00 00 7e d6 e8 40 00 00:21:14.980 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 7e d6 a8 40 00 00:21:14.980 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: --/27 Celsius
Lifetime Min/Max Temperature: --/35 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (119)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 13 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink