80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HD322/HD322HJ/FDDAB28CEE27
Andrey Ponomarenko b1c41e7edc Update of reports (new: 3637, modified: 0)
2022-03-18 23:39:11 +03:00

325 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD322HJ
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AC01118
User Capacity: 320,071,851,520 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Sun Jan 2 18:52:06 2022 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 3991) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 67) minutes.
Conveyance self-test routine
recommended polling time: ( 8) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 092 092 011 - 3240
4 Start_Stop_Count -O--CK 097 097 000 - 2948
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 0
9 Power_On_Hours -O--CK 099 099 000 - 7028
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 2
12 Power_Cycle_Count -O--CK 097 097 000 - 2897
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 6
184 End-to-End_Error PO--CK 001 001 000 - 300
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 078 052 000 - 22 (Min/Max 22/22)
194 Temperature_Celsius -O---K 075 051 000 - 25 (Min/Max 22/25)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 29553
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 099 044 000 - 45614
200 Multi_Zone_Error_Rate -O-R-- 099 081 000 - 662
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 45631 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 45631 [6] occurred at disk power-on lifetime: 7013 hours (292 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 7f 00 00 04 83 23 77 e0 00 127 sectors at LBA = 0x04832377 = 75703159
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 7f 00 00 04 83 23 77 e0 00 00:00:10.870 READ DMA EXT
25 20 20 00 21 00 00 04 83 23 56 e0 00 00:00:10.870 READ DMA EXT
25 20 20 00 7f 00 00 04 83 22 d7 e0 00 00:00:10.870 READ DMA EXT
25 20 20 00 7f 00 00 04 83 22 58 e0 00 00:00:10.860 READ DMA EXT
25 20 20 00 7f 00 00 04 83 21 d9 e0 00 00:00:10.860 READ DMA EXT
Error 45630 [5] occurred at disk power-on lifetime: 7013 hours (292 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 7f 00 00 02 71 46 86 e0 00 127 sectors at LBA = 0x02714686 = 40978054
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 7f 00 00 02 71 47 84 e0 00 00:00:10.220 READ DMA EXT
25 20 20 00 7f 00 00 02 71 47 05 e0 00 00:00:10.220 READ DMA EXT
25 20 20 00 7f 00 00 02 71 46 86 e0 00 00:00:10.220 READ DMA EXT
25 20 20 00 03 00 00 02 71 46 83 e0 00 00:00:10.220 READ DMA EXT
25 20 20 00 03 00 00 02 71 46 80 e0 00 00:00:10.220 READ DMA EXT
Error 45629 [4] occurred at disk power-on lifetime: 7013 hours (292 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 7f 00 00 04 62 16 c8 e0 00 127 sectors at LBA = 0x046216c8 = 73537224
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 7f 00 00 04 62 1b 3f e0 00 00:00:09.880 READ DMA EXT
25 20 20 00 7f 00 00 04 62 1a c0 e0 00 00:00:09.880 READ DMA EXT
25 20 20 00 7f 00 00 04 62 1a 41 e0 00 00:00:09.880 READ DMA EXT
25 20 20 00 7f 00 00 04 62 19 c2 e0 00 00:00:09.880 READ DMA EXT
25 20 20 00 7f 00 00 04 62 19 43 e0 00 00:00:09.880 READ DMA EXT
Error 45628 [3] occurred at disk power-on lifetime: 6970 hours (290 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 db 00 00 00 20 53 ad e0 00 219 sectors at LBA = 0x002053ad = 2118573
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 ed 00 00 00 20 52 9b e0 00 00:31:32.100 WRITE DMA EXT
35 00 00 00 ec 00 00 00 20 51 9c e0 00 00:31:32.100 WRITE DMA EXT
35 00 00 00 ec 00 00 00 20 50 9c e0 00 00:31:32.100 WRITE DMA EXT
35 00 00 00 f0 00 00 00 20 4f 99 e0 00 00:31:32.100 WRITE DMA EXT
35 00 00 00 ed 00 00 00 20 4e 9b e0 00 00:31:32.100 WRITE DMA EXT
Error 45627 [2] occurred at disk power-on lifetime: 6969 hours (290 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 b8 00 00 05 ff 91 f0 e0 00 184 sectors at LBA = 0x05ff91f0 = 100635120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 ee 00 00 05 ff 90 d2 e0 00 00:11:51.970 WRITE DMA EXT
35 00 00 00 ef 00 00 05 ff 8f d1 e0 00 00:11:51.970 WRITE DMA EXT
35 00 00 00 ef 00 00 05 ff 8e d1 e0 00 00:11:51.960 WRITE DMA EXT
35 00 00 00 ee 00 00 05 ff 8d d2 e0 00 00:11:51.960 WRITE DMA EXT
35 00 00 00 ef 00 00 05 ff 8c d1 e0 00 00:11:51.960 WRITE DMA EXT
Error 45626 [1] occurred at disk power-on lifetime: 6969 hours (290 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 8b 00 00 05 c5 70 75 e0 00 139 sectors at LBA = 0x05c57075 = 96825461
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 ee 00 00 05 c5 6f 33 e0 00 00:01:54.620 WRITE DMA EXT
35 00 00 00 ee 00 00 05 c5 6e 33 e0 00 00:01:54.620 WRITE DMA EXT
35 00 00 00 ed 00 00 05 c5 6d 34 e0 00 00:01:54.620 WRITE DMA EXT
35 00 00 00 ea 00 00 05 c5 6c 37 e0 00 00:01:54.620 WRITE DMA EXT
35 00 00 00 06 00 00 05 b9 c7 9b e0 00 00:01:54.620 WRITE DMA EXT
Error 45625 [0] occurred at disk power-on lifetime: 6969 hours (290 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 91 00 00 05 c4 7d 6f e0 00 145 sectors at LBA = 0x05c47d6f = 96763247
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 f4 00 00 05 c4 7c 0c e0 00 00:01:50.420 WRITE DMA EXT
35 00 00 00 ed 00 00 05 c4 7b 13 e0 00 00:01:50.420 WRITE DMA EXT
35 00 00 00 0e 00 00 0e 00 e8 b2 e0 00 00:01:50.420 WRITE DMA EXT
35 00 00 00 0f 00 00 0e 00 e8 b1 e0 00 00:01:50.420 WRITE DMA EXT
35 00 00 00 d0 00 00 0e 05 30 31 e0 00 00:01:50.420 WRITE DMA EXT
Error 45624 [7] occurred at disk power-on lifetime: 6969 hours (290 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d2 00 01 00 00 05 c2 98 37 e0 00 1 sectors at LBA = 0x05c29837 = 96639031
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 ef 00 00 05 c2 96 49 e0 00 00:01:19.210 WRITE DMA EXT
35 00 00 00 e7 00 00 05 c2 95 51 e0 00 00:01:19.210 WRITE DMA EXT
35 00 00 00 01 00 00 00 5b d5 e7 e0 00 00:01:19.210 WRITE DMA EXT
35 00 00 00 07 00 00 00 5d 6e 01 e0 00 00:01:19.210 WRITE DMA EXT
25 00 00 00 40 00 00 04 4d 8b d8 e0 00 00:01:18.810 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 25 Celsius
Power Cycle Min/Max Temperature: --/25 Celsius
Lifetime Min/Max Temperature: --/50 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (75)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink