80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HD501/HD501LJ/40EACA215559
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

323 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint T166
Device Model: SAMSUNG HD501LJ
Serial Number: --
LU WWN Device Id: 5 0000f0 ...
Firmware Version: CR100-12
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 3b
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Tue Oct 4 10:54:04 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8778) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 150) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 253 100 051 - 0
3 Spin_Up_Time POS--- 100 100 015 - 6400
4 Start_Stop_Count -O--CK 096 096 000 - 4514
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 3
7 Seek_Error_Rate POSR-- 253 253 051 - 0
8 Seek_Time_Performance P-S--K 253 253 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 16012
10 Spin_Retry_Count PO--CK 253 253 051 - 0
11 Calibration_Retry_Count -O--C- 253 100 000 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1668
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 4420
187 Reported_Uncorrect -O--CK 097 097 000 - 4
188 Command_Timeout -O--CK 100 100 000 - 81
190 Airflow_Temperature_Cel -O---K 070 048 000 - 30
194 Temperature_Celsius -O---K 148 082 000 - 30
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 4420
196 Reallocated_Event_Count -O--CK 100 100 000 - 3
197 Total_Pending_Sectors -O--C- 253 100 000 - 0
198 Offline_Uncorrectable ----CK 253 253 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-- 253 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0
202 Data_Address_Mark_Errs -O--CK 100 100 000 - 28
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Invalid Error Log index = 0x0000, trying reserved byte (0x07) instead
Device Error Count: 111 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 111 [6] occurred at disk power-on lifetime: 12018 hours (500 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 15 a8 00 00 00 00 0a 00 40 00 Error: ICRC, ABRT at LBA = 0x00000a00 = 2560
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 80 00 15 a8 00 00 00 00 0a 00 40 00 1d+04:31:26.938 READ FPDMA QUEUED
60 18 80 13 a0 00 00 00 00 08 80 40 00 1d+04:31:26.938 READ FPDMA QUEUED
60 18 80 13 a0 00 00 00 00 08 80 40 00 1d+04:31:26.938 READ FPDMA QUEUED
60 18 80 13 a0 00 00 00 00 08 80 40 00 1d+04:31:26.938 READ FPDMA QUEUED
60 08 18 11 90 00 00 00 00 08 20 40 00 1d+04:31:26.938 READ FPDMA QUEUED
Error 110 [5] occurred at disk power-on lifetime: 12018 hours (500 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 0e 78 00 00 3a 38 5f f8 40 00 Error: ICRC, ABRT at LBA = 0x3a385ff8 = 976773112
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 a0 08 0e 78 00 00 3a 38 5f f8 40 00 1d+04:31:25.813 READ FPDMA QUEUED
60 a0 08 0e 78 00 00 3a 38 5f f8 40 00 1d+04:31:25.813 READ FPDMA QUEUED
60 a0 08 0e 78 00 00 3a 38 5f f8 40 00 1d+04:31:25.813 READ FPDMA QUEUED
60 a0 08 0e 78 00 00 3a 38 5f f8 40 00 1d+04:31:25.813 READ FPDMA QUEUED
60 50 18 09 50 00 00 3a 38 5d e8 40 00 1d+04:31:25.813 READ FPDMA QUEUED
Error 109 [4] occurred at disk power-on lifetime: 12018 hours (500 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 13 a0 00 00 00 00 00 80 40 00 Error: ICRC, ABRT at LBA = 0x00000080 = 128
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 18 80 13 a0 00 00 00 00 00 80 40 00 1d+04:31:25.250 READ FPDMA QUEUED
60 18 80 13 a0 00 00 00 00 00 80 40 00 1d+04:31:25.250 READ FPDMA QUEUED
60 18 80 13 a0 00 00 00 00 00 80 40 00 1d+04:31:25.250 READ FPDMA QUEUED
60 08 18 11 90 00 00 00 00 00 20 40 00 1d+04:31:25.250 READ FPDMA QUEUED
60 08 08 10 80 00 00 00 00 00 78 40 00 1d+04:31:25.250 READ FPDMA QUEUED
Error 108 [3] occurred at disk power-on lifetime: 12018 hours (500 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 07 40 00 00 3a 38 5f 88 40 00 Error: ICRC, ABRT at LBA = 0x3a385f88 = 976773000
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 f8 68 07 40 00 00 3a 38 5f 88 40 00 1d+04:31:23.625 READ FPDMA QUEUED
60 00 00 05 28 00 00 3a 38 5c 00 40 00 1d+04:31:23.625 READ FPDMA QUEUED
60 08 00 04 20 00 00 00 00 0a 00 40 00 1d+04:31:23.625 READ FPDMA QUEUED
60 08 08 03 18 00 00 00 00 09 f8 40 00 1d+04:31:23.625 READ FPDMA QUEUED
60 08 08 02 10 00 00 00 00 09 f0 40 00 1d+04:31:23.625 READ FPDMA QUEUED
Error 107 [2] occurred at disk power-on lifetime: 12018 hours (500 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 07 48 00 00 00 00 08 80 40 00 Error: ICRC, ABRT at LBA = 0x00000880 = 2176
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 18 80 07 48 00 00 00 00 08 80 40 00 1d+04:31:23.125 READ FPDMA QUEUED
60 18 80 07 48 00 00 00 00 08 80 40 00 1d+04:31:23.063 READ FPDMA QUEUED
60 18 80 07 48 00 00 00 00 08 80 40 00 1d+04:31:23.063 READ FPDMA QUEUED
60 08 18 05 30 00 00 00 00 08 20 40 00 1d+04:31:23.063 READ FPDMA QUEUED
60 08 08 03 18 00 00 00 00 08 78 40 00 1d+04:31:23.063 READ FPDMA QUEUED
Error 106 [1] occurred at disk power-on lifetime: 12018 hours (500 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 13 a0 00 00 3a 38 5f f8 40 00 Error: ICRC, ABRT at LBA = 0x3a385ff8 = 976773112
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 a0 08 13 a0 00 00 3a 38 5f f8 40 00 1d+04:31:22.438 READ FPDMA QUEUED
60 a0 08 13 a0 00 00 3a 38 5f f8 40 00 1d+04:31:22.438 READ FPDMA QUEUED
60 a0 08 13 a0 00 00 3a 38 5f f8 40 00 1d+04:31:22.438 READ FPDMA QUEUED
60 a0 08 13 a0 00 00 3a 38 5f f8 40 00 1d+04:31:22.438 READ FPDMA QUEUED
60 50 18 0e 78 00 00 3a 38 5d e8 40 00 1d+04:31:22.438 READ FPDMA QUEUED
Error 105 [0] occurred at disk power-on lifetime: 12018 hours (500 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 09 48 00 00 3a 38 5e a0 40 00 Error: ICRC, ABRT at LBA = 0x3a385ea0 = 976772768
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 08 08 09 48 00 00 3a 38 5e a0 40 00 1d+04:31:21.875 READ FPDMA QUEUED
60 08 08 08 40 00 00 3a 38 5f 30 40 00 1d+04:31:21.875 READ FPDMA QUEUED
60 08 08 0f 78 00 00 3a 38 5f f0 40 00 1d+04:31:21.875 READ FPDMA QUEUED
60 08 08 0e 70 00 00 3a 38 5f 28 40 00 1d+04:31:21.875 READ FPDMA QUEUED
60 08 08 07 38 00 00 3a 38 60 28 40 00 1d+04:31:21.813 READ FPDMA QUEUED
Error 104 [7] occurred at disk power-on lifetime: 9644 hours (401 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 06 30 00 00 00 00 00 28 40 00 Error: ICRC, ABRT at LBA = 0x00000028 = 40
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 08 08 06 30 00 00 00 00 00 28 40 00 00:11:11.250 WRITE FPDMA QUEUED
60 00 08 05 28 00 00 00 00 00 28 40 00 00:11:11.250 READ FPDMA QUEUED
ea 10 00 00 00 00 00 00 00 00 00 40 00 00:11:11.250 FLUSH CACHE EXT
61 10 08 14 a0 00 00 00 00 00 20 40 00 00:11:11.250 WRITE FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:11:11.250 SET FEATURES [Enable SATA feature]
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 30/31 Celsius
Lifetime Min/Max Temperature: 10/52 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (27)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8001 2 0 Vendor specific
View Git Blame Copy Permalink