80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HD501/HD501LJ/4DE413FA6B9A
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

322 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 14.0-CURRENT amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint T166
Device Model: SAMSUNG HD501LJ
Serial Number: --
LU WWN Device Id: 5 0000f0 ...
Firmware Version: CR100-10
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 3b
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Sun Jul 17 18:36:01 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8961) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 153) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 253 100 051 - 1
3 Spin_Up_Time POS--- 100 100 015 - 7616
4 Start_Stop_Count -O--CK 074 074 000 - 26593
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 2
7 Seek_Error_Rate POSR-- 253 253 051 - 0
8 Seek_Time_Performance P-S--K 253 253 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 26239
10 Spin_Retry_Count PO--CK 253 253 051 - 0
11 Calibration_Retry_Count -O--C- 253 100 000 - 0
12 Power_Cycle_Count -O--CK 093 093 000 - 7255
187 Reported_Uncorrect -O--CK 043 043 000 - 393274
188 Command_Timeout -O--CK 253 253 000 - 0
190 Airflow_Temperature_Cel -O---K 072 053 000 - 28
194 Temperature_Celsius -O---K 154 097 000 - 28
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 32482
196 Reallocated_Event_Count -O--CK 100 100 000 - 2
197 Total_Pending_Sectors -O--C- 253 100 000 - 0
198 Offline_Uncorrectable ----CK 253 253 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-- 253 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0
202 Data_Address_Mark_Errs -O--CK 098 098 000 - 699
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Invalid Error Log index = 0x0000, trying reserved byte (0x05) instead
Device Error Count: 77 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 77 [4] occurred at disk power-on lifetime: 11731 hours (488 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 18 fc 00 b8 e0 00 Error: UNC 8 sectors at LBA = 0x18fc00b8 = 419168440
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 00 18 fc b8 e0 00 00:55:09.563 READ DMA
c8 00 00 00 08 00 00 00 18 fc b0 e0 00 00:55:06.938 READ DMA
c8 00 00 00 08 00 00 00 18 fc a8 e0 00 00:55:06.938 READ DMA
c8 00 00 00 08 00 00 00 18 fc a0 e0 00 00:55:06.938 READ DMA
c8 00 00 00 08 00 00 00 18 fc 98 e0 00 00:55:06.938 READ DMA
Error 76 [3] occurred at disk power-on lifetime: 11642 hours (485 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 18 fc b8 e0 00 Error: UNC 1 sectors at LBA = 0x0018fcb8 = 1637560
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 18 fc b8 e0 00 02:32:21.625 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b7 e0 00 02:32:18.813 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b6 e0 00 02:32:18.813 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b5 e0 00 02:32:18.813 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b4 e0 00 02:32:18.813 READ DMA EXT
Error 75 [2] occurred at disk power-on lifetime: 11642 hours (485 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 00 00 18 fc a0 e0 00 Error: UNC 32 sectors at LBA = 0x0018fca0 = 1637536
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 18 fc a0 e0 00 02:32:18.500 READ DMA EXT
35 00 00 00 18 00 00 01 56 af 30 e0 00 02:32:15.688 WRITE DMA EXT
25 00 00 00 18 00 00 00 16 f2 20 e0 00 02:32:15.688 READ DMA EXT
35 00 00 00 20 00 00 13 24 b8 a0 e0 00 02:32:15.688 WRITE DMA EXT
35 00 00 00 20 00 00 13 27 3d 80 e0 00 02:32:15.688 WRITE DMA EXT
Error 74 [1] occurred at disk power-on lifetime: 11641 hours (485 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 18 fc b8 e0 00 Error: UNC 1 sectors at LBA = 0x0018fcb8 = 1637560
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 18 fc b8 e0 00 01:47:52.563 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b7 e0 00 01:47:49.750 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b6 e0 00 01:47:49.750 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b5 e0 00 01:47:49.750 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b4 e0 00 01:47:49.750 READ DMA EXT
Error 73 [0] occurred at disk power-on lifetime: 11641 hours (485 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 00 00 18 fc a0 e0 00 Error: UNC 32 sectors at LBA = 0x0018fca0 = 1637536
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 18 fc a0 e0 00 01:47:49.625 READ DMA EXT
25 00 00 00 08 00 00 0e df 91 e0 e0 00 01:47:46.813 READ DMA EXT
35 00 00 00 18 00 00 00 f1 c1 88 e0 00 01:47:46.750 WRITE DMA EXT
25 00 00 00 18 00 00 01 e9 27 50 e0 00 01:47:46.750 READ DMA EXT
35 00 00 00 10 00 00 00 f1 c1 78 e0 00 01:47:46.750 WRITE DMA EXT
Error 72 [7] occurred at disk power-on lifetime: 11623 hours (484 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 18 fc b8 e0 00 Error: UNC 1 sectors at LBA = 0x0018fcb8 = 1637560
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 18 fc b8 e0 00 05:40:00.938 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b7 e0 00 05:39:58.125 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b6 e0 00 05:39:58.125 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b5 e0 00 05:39:58.125 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b4 e0 00 05:39:58.125 READ DMA EXT
Error 71 [6] occurred at disk power-on lifetime: 11623 hours (484 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 00 00 18 fc a0 e0 00 Error: UNC 32 sectors at LBA = 0x0018fca0 = 1637536
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 18 fc a0 e0 00 05:39:57.813 READ DMA EXT
25 00 00 00 08 00 00 01 56 5e 58 e0 00 05:39:54.938 READ DMA EXT
25 00 00 00 08 00 00 22 e1 ff 68 e0 00 05:39:54.938 READ DMA EXT
35 00 00 00 18 00 00 01 05 85 c0 e0 00 05:39:54.938 WRITE DMA EXT
25 00 00 00 18 00 00 00 32 44 08 e0 00 05:39:54.938 READ DMA EXT
Error 70 [5] occurred at disk power-on lifetime: 11599 hours (483 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 18 fc b8 e0 00 Error: UNC 1 sectors at LBA = 0x0018fcb8 = 1637560
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 18 fc b8 e0 00 02:50:02.938 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b7 e0 00 02:50:00.125 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b6 e0 00 02:50:00.125 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b5 e0 00 02:50:00.125 READ DMA EXT
25 00 00 00 01 00 00 00 18 fc b4 e0 00 02:50:00.125 READ DMA EXT
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7720 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 20/28 Celsius
Lifetime Min/Max Temperature: 7/47 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (94)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8001 2 0 Vendor specific
View Git Blame Copy Permalink