mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
172 lines
7.8 KiB
Plaintext
172 lines
7.8 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Device Model: SAMSUNG HE160HJ
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 0000f0 ...
|
|
Firmware Version: JF800-24
|
|
User Capacity: 160,000,000,000 bytes [160 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: Not in smartctl database 7.3/5319
|
|
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
|
|
Local Time is: Fri May 27 23:15:39 2022 UTC
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Disabled
|
|
APM feature is: Disabled
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 2964) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 50) minutes.
|
|
SCT capabilities: (0x003f) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
|
3 Spin_Up_Time POS--- 253 253 025 - 4352
|
|
4 Start_Stop_Count -O--CK 098 098 000 - 2494
|
|
5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0
|
|
7 Seek_Error_Rate -OSR-- 253 253 000 - 0
|
|
8 Seek_Time_Performance --S--K 253 253 000 - 0
|
|
9 Power_On_Hours -O--CK 100 100 000 - 89770
|
|
10 Spin_Retry_Count -O--CK 253 253 000 - 0
|
|
11 Calibration_Retry_Count -O--C- 253 253 000 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 446
|
|
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 1702608
|
|
184 End-to-End_Error PO--CK 253 253 099 - 0
|
|
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
|
188 Command_Timeout -O--CK 253 253 000 - 0
|
|
190 Airflow_Temperature_Cel -O---K 130 127 000 - 36 (Min/Max 11/37)
|
|
194 Temperature_Celsius -O---K 127 127 000 - 37 (Min/Max 11/37)
|
|
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1702608
|
|
196 Reallocated_Event_Count -O--CK 253 253 000 - 0
|
|
197 Current_Pending_Sector -O--C- 253 253 000 - 0
|
|
198 Offline_Uncorrectable ----CK 253 253 000 - 0
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
|
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
|
|
201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0
|
|
202 Data_Address_Mark_Errs -O--CK 100 100 000 - 6
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 2 Comprehensive SMART error log
|
|
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log (GP Log 0x07) not supported
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Extended offline Completed without error 00% 1 -
|
|
# 2 Short offline Completed without error 00% 0 -
|
|
|
|
SMART Selective self-test log data structure revision number 0
|
|
Note: revision number not 1 implies that no selective self-test has ever been run
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 2
|
|
SCT Version (vendor specific): 256 (0x0100)
|
|
Device State: Active (0)
|
|
Current Temperature: 36 Celsius
|
|
Power Cycle Min/Max Temperature: 36/37 Celsius
|
|
Lifetime Min/Max Temperature: 10/38 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: -4/72 Celsius
|
|
Min/Max Temperature Limit: -9/77 Celsius
|
|
Temperature History Size (Index): 128 (47)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: 80 (8.0 seconds)
|
|
Write: 80 (8.0 seconds)
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
0x8001 2 0 Vendor specific
|
|
|